diff mbox series

[v2,3/4] arm64: dts: qcom: x1e80100-crd: Add repeater nodes

Message ID 20240221-x1e80100-dts-smb2360-v2-3-037d183cc021@linaro.org (mailing list archive)
State Superseded
Headers show
Series arm64: dts: qcom: x1e80100: Add support for eUSB2 repeaters | expand

Commit Message

Abel Vesa Feb. 21, 2024, 2:38 p.m. UTC
Include the SMB2360 and add regulators to each one of those 3 eUSB2
repeaters. Tie up the repeaters to their corresponding USB HS PHY.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

Comments

Konrad Dybcio Feb. 21, 2024, 2:40 p.m. UTC | #1
On 21.02.2024 15:38, Abel Vesa wrote:
> Include the SMB2360 and add regulators to each one of those 3 eUSB2
> repeaters. Tie up the repeaters to their corresponding USB HS PHY.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
That's a lot of USB2!

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index 6a0a54532e5f..37e19c0aa236 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -9,6 +9,7 @@ 
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "x1e80100.dtsi"
+#include "smb2360.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. X1E80100 CRD";
@@ -680,6 +681,21 @@  &remoteproc_cdsp {
 	status = "okay";
 };
 
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_2_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&smb2360_3_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l8b_3p0>;
+};
+
 &swr0 {
 	status = "okay";
 
@@ -817,6 +833,8 @@  &usb_1_ss0_hsphy {
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
+	phys = <&smb2360_1_eusb2_repeater>;
+
 	status = "okay";
 };
 
@@ -837,6 +855,8 @@  &usb_1_ss1_hsphy {
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
+	phys = <&smb2360_2_eusb2_repeater>;
+
 	status = "okay";
 };
 
@@ -857,6 +877,8 @@  &usb_1_ss2_hsphy {
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
+	phys = <&smb2360_3_eusb2_repeater>;
+
 	status = "okay";
 };