diff mbox series

[v4,11/15] arm64: dts: qcs404: thermal: Add interrupt support

Message ID 4590cec3348ff0644175f8de27398c0e935a7a2c.1569015835.git.amit.kucheria@linaro.org (mailing list archive)
State Superseded
Headers show
Series thermal: qcom: tsens: Add interrupt support | expand

Commit Message

Amit Kucheria Sept. 20, 2019, 9:52 p.m. UTC 
Register upper-lower interrupt for the tsens controller.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcs404.dtsi | 42 +++++++++++++++-------------
 1 file changed, 22 insertions(+), 20 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 3d0789775009..065a60d50a07 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -280,6 +280,8 @@ 
 			nvmem-cells = <&tsens_caldata>;
 			nvmem-cell-names = "calib";
 			#qcom,sensors = <10>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -1071,8 +1073,8 @@ 
 
 	thermal-zones {
 		aoss-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 0>;
 
@@ -1086,8 +1088,8 @@ 
 		};
 
 		q6-hvx-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 1>;
 
@@ -1101,8 +1103,8 @@ 
 		};
 
 		lpass-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 2>;
 
@@ -1116,8 +1118,8 @@ 
 		};
 
 		wlan-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 3>;
 
@@ -1131,8 +1133,8 @@ 
 		};
 
 		cluster-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 4>;
 
@@ -1165,8 +1167,8 @@ 
 		};
 
 		cpu0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 5>;
 
@@ -1199,8 +1201,8 @@ 
 		};
 
 		cpu1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 6>;
 
@@ -1233,8 +1235,8 @@ 
 		};
 
 		cpu2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 7>;
 
@@ -1267,8 +1269,8 @@ 
 		};
 
 		cpu3-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 8>;
 
@@ -1301,8 +1303,8 @@ 
 		};
 
 		gpu-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 9>;