Message ID | 20220126221725.710167-8-bhupesh.sharma@linaro.org (mailing list archive) |
---|---|
State | Changes Requested, archived |
Headers | show |
Series | Add ethernet support for Qualcomm SA8155p-ADP board | expand |
On Thu, 27 Jan 2022 at 01:19, Bhupesh Sharma <bhupesh.sharma@linaro.org> wrote: > > On sm8150 emac clk registers are powered up by the GDSC power > domain. Use runtime PM calls to make sure that required power domain is > powered on while we access clock controller's registers. > > Cc: Stephen Boyd <sboyd@kernel.org> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- > drivers/clk/qcom/gcc-sm8150.c | 27 +++++++++++++++++++++++++-- > 1 file changed, 25 insertions(+), 2 deletions(-) > > diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c > index ada755ad55f7..2e71afed81fd 100644 > --- a/drivers/clk/qcom/gcc-sm8150.c > +++ b/drivers/clk/qcom/gcc-sm8150.c > @@ -5,6 +5,7 @@ > #include <linux/bitops.h> > #include <linux/err.h> > #include <linux/platform_device.h> > +#include <linux/pm_runtime.h> > #include <linux/module.h> > #include <linux/of.h> > #include <linux/of_device.h> > @@ -3792,19 +3793,41 @@ static const struct of_device_id gcc_sm8150_match_table[] = { > }; > MODULE_DEVICE_TABLE(of, gcc_sm8150_match_table); > > +static void gcc_sm8150_pm_runtime_disable(void *data) > +{ > + pm_runtime_disable(data); > +} > + > static int gcc_sm8150_probe(struct platform_device *pdev) > { > struct regmap *regmap; > + int ret; > + > + pm_runtime_enable(&pdev->dev); > + > + ret = devm_add_action_or_reset(&pdev->dev, gcc_sm8150_pm_runtime_disable, &pdev->dev); > + if (ret) > + return ret; Please use devm_pm_runtime_enable() instead. > + > + ret = pm_runtime_resume_and_get(&pdev->dev); > + if (ret) > + return ret; > > regmap = qcom_cc_map(pdev, &gcc_sm8150_desc); > - if (IS_ERR(regmap)) > + if (IS_ERR(regmap)) { > + pm_runtime_put(&pdev->dev); > return PTR_ERR(regmap); > + } > > /* Disable the GPLL0 active input to NPU and GPU via MISC registers */ > regmap_update_bits(regmap, 0x4d110, 0x3, 0x3); > regmap_update_bits(regmap, 0x71028, 0x3, 0x3); > > - return qcom_cc_really_probe(pdev, &gcc_sm8150_desc, regmap); > + ret = qcom_cc_really_probe(pdev, &gcc_sm8150_desc, regmap); > + > + pm_runtime_put(&pdev->dev); > + > + return ret; > } > > static struct platform_driver gcc_sm8150_driver = { > -- > 2.34.1 >
On Wed 26 Jan 16:17 CST 2022, Bhupesh Sharma wrote: > On sm8150 emac clk registers are powered up by the GDSC power > domain. Use runtime PM calls to make sure that required power domain is > powered on while we access clock controller's registers. > Typically the GCC registers need only "cx" enabled for us to much around with its registers and I don't see you add any references to additional resources, so can you please elaborate on how this affects the state of the system to enable you to operate the emac registers? Regards, Bjorn > Cc: Stephen Boyd <sboyd@kernel.org> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- > drivers/clk/qcom/gcc-sm8150.c | 27 +++++++++++++++++++++++++-- > 1 file changed, 25 insertions(+), 2 deletions(-) > > diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c > index ada755ad55f7..2e71afed81fd 100644 > --- a/drivers/clk/qcom/gcc-sm8150.c > +++ b/drivers/clk/qcom/gcc-sm8150.c > @@ -5,6 +5,7 @@ > #include <linux/bitops.h> > #include <linux/err.h> > #include <linux/platform_device.h> > +#include <linux/pm_runtime.h> > #include <linux/module.h> > #include <linux/of.h> > #include <linux/of_device.h> > @@ -3792,19 +3793,41 @@ static const struct of_device_id gcc_sm8150_match_table[] = { > }; > MODULE_DEVICE_TABLE(of, gcc_sm8150_match_table); > > +static void gcc_sm8150_pm_runtime_disable(void *data) > +{ > + pm_runtime_disable(data); > +} > + > static int gcc_sm8150_probe(struct platform_device *pdev) > { > struct regmap *regmap; > + int ret; > + > + pm_runtime_enable(&pdev->dev); > + > + ret = devm_add_action_or_reset(&pdev->dev, gcc_sm8150_pm_runtime_disable, &pdev->dev); > + if (ret) > + return ret; > + > + ret = pm_runtime_resume_and_get(&pdev->dev); > + if (ret) > + return ret; > > regmap = qcom_cc_map(pdev, &gcc_sm8150_desc); > - if (IS_ERR(regmap)) > + if (IS_ERR(regmap)) { > + pm_runtime_put(&pdev->dev); > return PTR_ERR(regmap); > + } > > /* Disable the GPLL0 active input to NPU and GPU via MISC registers */ > regmap_update_bits(regmap, 0x4d110, 0x3, 0x3); > regmap_update_bits(regmap, 0x71028, 0x3, 0x3); > > - return qcom_cc_really_probe(pdev, &gcc_sm8150_desc, regmap); > + ret = qcom_cc_really_probe(pdev, &gcc_sm8150_desc, regmap); > + > + pm_runtime_put(&pdev->dev); > + > + return ret; > } > > static struct platform_driver gcc_sm8150_driver = { > -- > 2.34.1 >
Hi Dmitry, Sorry for the late reply. On Thu, 27 Jan 2022 at 04:04, Dmitry Baryshkov <dmitry.baryshkov@linaro.org> wrote: > > On Thu, 27 Jan 2022 at 01:19, Bhupesh Sharma <bhupesh.sharma@linaro.org> wrote: > > > > On sm8150 emac clk registers are powered up by the GDSC power > > domain. Use runtime PM calls to make sure that required power domain is > > powered on while we access clock controller's registers. > > > > Cc: Stephen Boyd <sboyd@kernel.org> > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > > --- > > drivers/clk/qcom/gcc-sm8150.c | 27 +++++++++++++++++++++++++-- > > 1 file changed, 25 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c > > index ada755ad55f7..2e71afed81fd 100644 > > --- a/drivers/clk/qcom/gcc-sm8150.c > > +++ b/drivers/clk/qcom/gcc-sm8150.c > > @@ -5,6 +5,7 @@ > > #include <linux/bitops.h> > > #include <linux/err.h> > > #include <linux/platform_device.h> > > +#include <linux/pm_runtime.h> > > #include <linux/module.h> > > #include <linux/of.h> > > #include <linux/of_device.h> > > @@ -3792,19 +3793,41 @@ static const struct of_device_id gcc_sm8150_match_table[] = { > > }; > > MODULE_DEVICE_TABLE(of, gcc_sm8150_match_table); > > > > +static void gcc_sm8150_pm_runtime_disable(void *data) > > +{ > > + pm_runtime_disable(data); > > +} > > + > > static int gcc_sm8150_probe(struct platform_device *pdev) > > { > > struct regmap *regmap; > > + int ret; > > + > > + pm_runtime_enable(&pdev->dev); > > + > > + ret = devm_add_action_or_reset(&pdev->dev, gcc_sm8150_pm_runtime_disable, &pdev->dev); > > + if (ret) > > + return ret; > > Please use devm_pm_runtime_enable() instead. Sure, I will fix it in v2. Thanks, Bhupesh > > + > > + ret = pm_runtime_resume_and_get(&pdev->dev); > > + if (ret) > > + return ret; > > > > regmap = qcom_cc_map(pdev, &gcc_sm8150_desc); > > - if (IS_ERR(regmap)) > > + if (IS_ERR(regmap)) { > > + pm_runtime_put(&pdev->dev); > > return PTR_ERR(regmap); > > + } > > > > /* Disable the GPLL0 active input to NPU and GPU via MISC registers */ > > regmap_update_bits(regmap, 0x4d110, 0x3, 0x3); > > regmap_update_bits(regmap, 0x71028, 0x3, 0x3); > > > > - return qcom_cc_really_probe(pdev, &gcc_sm8150_desc, regmap); > > + ret = qcom_cc_really_probe(pdev, &gcc_sm8150_desc, regmap); > > + > > + pm_runtime_put(&pdev->dev); > > + > > + return ret; > > } > > > > static struct platform_driver gcc_sm8150_driver = { > > -- > > 2.34.1 > > > > > -- > With best wishes > Dmitry
HI Bjorn, Thanks for the review. Sorry for the late reply. On Tue, 1 Feb 2022 at 05:31, Bjorn Andersson <bjorn.andersson@linaro.org> wrote: > > On Wed 26 Jan 16:17 CST 2022, Bhupesh Sharma wrote: > > > On sm8150 emac clk registers are powered up by the GDSC power > > domain. Use runtime PM calls to make sure that required power domain is > > powered on while we access clock controller's registers. > > > > Typically the GCC registers need only "cx" enabled for us to much around > with its registers and I don't see you add any references to additional > resources, so can you please elaborate on how this affects the state of > the system to enable you to operate the emac registers? Indeed. On second thought and further tests, I think we don't need this change. Only keeping EMAC GDSC in ON state (always) should fix the issue (added via [PATCH 8/8] in this series). So, I will drop this from v2. Regards, Bhupesh > > Cc: Stephen Boyd <sboyd@kernel.org> > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > > --- > > drivers/clk/qcom/gcc-sm8150.c | 27 +++++++++++++++++++++++++-- > > 1 file changed, 25 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c > > index ada755ad55f7..2e71afed81fd 100644 > > --- a/drivers/clk/qcom/gcc-sm8150.c > > +++ b/drivers/clk/qcom/gcc-sm8150.c > > @@ -5,6 +5,7 @@ > > #include <linux/bitops.h> > > #include <linux/err.h> > > #include <linux/platform_device.h> > > +#include <linux/pm_runtime.h> > > #include <linux/module.h> > > #include <linux/of.h> > > #include <linux/of_device.h> > > @@ -3792,19 +3793,41 @@ static const struct of_device_id gcc_sm8150_match_table[] = { > > }; > > MODULE_DEVICE_TABLE(of, gcc_sm8150_match_table); > > > > +static void gcc_sm8150_pm_runtime_disable(void *data) > > +{ > > + pm_runtime_disable(data); > > +} > > + > > static int gcc_sm8150_probe(struct platform_device *pdev) > > { > > struct regmap *regmap; > > + int ret; > > + > > + pm_runtime_enable(&pdev->dev); > > + > > + ret = devm_add_action_or_reset(&pdev->dev, gcc_sm8150_pm_runtime_disable, &pdev->dev); > > + if (ret) > > + return ret; > > + > > + ret = pm_runtime_resume_and_get(&pdev->dev); > > + if (ret) > > + return ret; > > > > regmap = qcom_cc_map(pdev, &gcc_sm8150_desc); > > - if (IS_ERR(regmap)) > > + if (IS_ERR(regmap)) { > > + pm_runtime_put(&pdev->dev); > > return PTR_ERR(regmap); > > + } > > > > /* Disable the GPLL0 active input to NPU and GPU via MISC registers */ > > regmap_update_bits(regmap, 0x4d110, 0x3, 0x3); > > regmap_update_bits(regmap, 0x71028, 0x3, 0x3); > > > > - return qcom_cc_really_probe(pdev, &gcc_sm8150_desc, regmap); > > + ret = qcom_cc_really_probe(pdev, &gcc_sm8150_desc, regmap); > > + > > + pm_runtime_put(&pdev->dev); > > + > > + return ret; > > } > > > > static struct platform_driver gcc_sm8150_driver = { > > -- > > 2.34.1 > >
diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c index ada755ad55f7..2e71afed81fd 100644 --- a/drivers/clk/qcom/gcc-sm8150.c +++ b/drivers/clk/qcom/gcc-sm8150.c @@ -5,6 +5,7 @@ #include <linux/bitops.h> #include <linux/err.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> @@ -3792,19 +3793,41 @@ static const struct of_device_id gcc_sm8150_match_table[] = { }; MODULE_DEVICE_TABLE(of, gcc_sm8150_match_table); +static void gcc_sm8150_pm_runtime_disable(void *data) +{ + pm_runtime_disable(data); +} + static int gcc_sm8150_probe(struct platform_device *pdev) { struct regmap *regmap; + int ret; + + pm_runtime_enable(&pdev->dev); + + ret = devm_add_action_or_reset(&pdev->dev, gcc_sm8150_pm_runtime_disable, &pdev->dev); + if (ret) + return ret; + + ret = pm_runtime_resume_and_get(&pdev->dev); + if (ret) + return ret; regmap = qcom_cc_map(pdev, &gcc_sm8150_desc); - if (IS_ERR(regmap)) + if (IS_ERR(regmap)) { + pm_runtime_put(&pdev->dev); return PTR_ERR(regmap); + } /* Disable the GPLL0 active input to NPU and GPU via MISC registers */ regmap_update_bits(regmap, 0x4d110, 0x3, 0x3); regmap_update_bits(regmap, 0x71028, 0x3, 0x3); - return qcom_cc_really_probe(pdev, &gcc_sm8150_desc, regmap); + ret = qcom_cc_really_probe(pdev, &gcc_sm8150_desc, regmap); + + pm_runtime_put(&pdev->dev); + + return ret; } static struct platform_driver gcc_sm8150_driver = {
On sm8150 emac clk registers are powered up by the GDSC power domain. Use runtime PM calls to make sure that required power domain is powered on while we access clock controller's registers. Cc: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> --- drivers/clk/qcom/gcc-sm8150.c | 27 +++++++++++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-)