| Message ID | 302f8296299d6cd25b3689f5eca1c510a3290db3.1555354268.git.vitor.soares@synopsys.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add ST lsm6dso i3c suppport | expand |
> > For today the st_lsm6dsx driver support lsm6dso sensor only in > spi and i2c mode. > > The lsm6dso is also i3c capable so lets give i3c support to it. > Hi Vitor, thx, this is very cool :) Just a couple of nit inline Regards, Lorenzo > Signed-off-by: Vitor Soares <vitor.soares@synopsys.com> > --- > drivers/iio/imu/st_lsm6dsx/Kconfig | 8 +++- > drivers/iio/imu/st_lsm6dsx/Makefile | 1 + > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 67 +++++++++++++++++++++++++++++ > 3 files changed, 75 insertions(+), 1 deletion(-) > create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > > diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig > index 094fd00..1ab9bbf 100644 > --- a/drivers/iio/imu/st_lsm6dsx/Kconfig > +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig > @@ -1,11 +1,12 @@ > > config IIO_ST_LSM6DSX > tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors" > - depends on (I2C || SPI) > + depends on (I2C || SPI || I3C) > select IIO_BUFFER > select IIO_KFIFO_BUF > select IIO_ST_LSM6DSX_I2C if (I2C) > select IIO_ST_LSM6DSX_SPI if (SPI_MASTER) > + select IIO_ST_LSM6DSX_I3C if (I3C) > help > Say yes here to build support for STMicroelectronics LSM6DSx imu > sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, > @@ -23,3 +24,8 @@ config IIO_ST_LSM6DSX_SPI > tristate > depends on IIO_ST_LSM6DSX > select REGMAP_SPI > + > +config IIO_ST_LSM6DSX_I3C > + tristate > + depends on IIO_ST_LSM6DSX > + select REGMAP_I3C > diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile > index e5f733c..c676965 100644 > --- a/drivers/iio/imu/st_lsm6dsx/Makefile > +++ b/drivers/iio/imu/st_lsm6dsx/Makefile > @@ -4,3 +4,4 @@ st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \ > obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o > obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o > obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o > +obj-$(CONFIG_IIO_ST_LSM6DSX_I3C) += st_lsm6dsx_i3c.o > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > new file mode 100644 > index 0000000..2df5e70 > --- /dev/null > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > @@ -0,0 +1,67 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates. > + * > + * Author: Vitor Soares <vitor.soares@synopsys.com> > + */ > + > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/i3c/device.h> > +#include <linux/i3c/master.h> > +#include <linux/slab.h> > +#include <linux/of.h> > +#include <linux/regmap.h> > + > +#include "st_lsm6dsx.h" > + > +#define NAME_SIZE 32 > + > +struct st_lsm6dsx_i3c_data { > + char name[NAME_SIZE]; > + enum st_lsm6dsx_hw_id id; > +}; > + > +static const struct st_lsm6dsx_i3c_data hw_data[] = { > + { ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID }, > +}; > + > +static const struct regmap_config st_lsm6dsx_i3c_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > +}; > + > +static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev) > +{ > + const struct i3c_device_id *id = i3c_get_device_id(i3cdev); > + const struct st_lsm6dsx_i3c_data *hw_data = id->data; > + struct regmap *regmap; > + > + regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config); > + if (IS_ERR(regmap)) { > + dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n", > + (int)PTR_ERR(regmap)); > + return PTR_ERR(regmap); > + } > + > + return st_lsm6dsx_probe(&i3cdev->dev, 0, hw_data->id, > + hw_data->name, regmap); In order to support the hw FIFO, I guess you are planning to support interrupts/IBI here > +} > + please remove 'new line' here > + > +static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = { > + I3C_DEVICE(0x0104, 0x006C, &hw_data[0]), > + { /* sentinel */ }, > +}; > +MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids); > + > +static struct i3c_driver st_lsm6dsx_driver = { > + .driver.name = "st_lsm6dsx_i3c", > + .probe = st_lsm6dsx_i3c_probe, > + .id_table = st_lsm6dsx_i3c_ids, > +}; > +module_i3c_driver(st_lsm6dsx_driver); > + > +MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>"); > +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver"); > +MODULE_LICENSE("GPL v2"); > + > -- > 2.7.4 >
On Mon, 15 Apr 2019 21:19:41 +0200 Vitor Soares <vitor.soares@synopsys.com> wrote: > For today the st_lsm6dsx driver support lsm6dso sensor only in > spi and i2c mode. > > The lsm6dso is also i3c capable so lets give i3c support to it. > > Signed-off-by: Vitor Soares <vitor.soares@synopsys.com> > --- > drivers/iio/imu/st_lsm6dsx/Kconfig | 8 +++- > drivers/iio/imu/st_lsm6dsx/Makefile | 1 + > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 67 +++++++++++++++++++++++++++++ > 3 files changed, 75 insertions(+), 1 deletion(-) > create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > > diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig > index 094fd00..1ab9bbf 100644 > --- a/drivers/iio/imu/st_lsm6dsx/Kconfig > +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig > @@ -1,11 +1,12 @@ > > config IIO_ST_LSM6DSX > tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors" > - depends on (I2C || SPI) > + depends on (I2C || SPI || I3C) > select IIO_BUFFER > select IIO_KFIFO_BUF > select IIO_ST_LSM6DSX_I2C if (I2C) > select IIO_ST_LSM6DSX_SPI if (SPI_MASTER) > + select IIO_ST_LSM6DSX_I3C if (I3C) > help > Say yes here to build support for STMicroelectronics LSM6DSx imu > sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, > @@ -23,3 +24,8 @@ config IIO_ST_LSM6DSX_SPI > tristate > depends on IIO_ST_LSM6DSX > select REGMAP_SPI > + > +config IIO_ST_LSM6DSX_I3C > + tristate > + depends on IIO_ST_LSM6DSX > + select REGMAP_I3C > diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile > index e5f733c..c676965 100644 > --- a/drivers/iio/imu/st_lsm6dsx/Makefile > +++ b/drivers/iio/imu/st_lsm6dsx/Makefile > @@ -4,3 +4,4 @@ st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \ > obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o > obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o > obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o > +obj-$(CONFIG_IIO_ST_LSM6DSX_I3C) += st_lsm6dsx_i3c.o > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > new file mode 100644 > index 0000000..2df5e70 > --- /dev/null > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > @@ -0,0 +1,67 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates. > + * > + * Author: Vitor Soares <vitor.soares@synopsys.com> > + */ > + > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/i3c/device.h> > +#include <linux/i3c/master.h> > +#include <linux/slab.h> > +#include <linux/of.h> > +#include <linux/regmap.h> > + > +#include "st_lsm6dsx.h" > + > +#define NAME_SIZE 32 > + > +struct st_lsm6dsx_i3c_data { > + char name[NAME_SIZE]; const char *name; > + enum st_lsm6dsx_hw_id id; > +}; > + > +static const struct st_lsm6dsx_i3c_data hw_data[] = { No need to make it an array, and it should probably be named st_lsm6dso_data not hw_data. > + { ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID }, > +}; > + > +static const struct regmap_config st_lsm6dsx_i3c_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > +}; > + > +static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev) > +{ > + const struct i3c_device_id *id = i3c_get_device_id(i3cdev); i3c_device_match_id(i3cdev, st_lsm6dsx_i3c_ids); > + const struct st_lsm6dsx_i3c_data *hw_data = id->data; > + struct regmap *regmap; > + > + regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config); > + if (IS_ERR(regmap)) { > + dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n", > + (int)PTR_ERR(regmap)); > + return PTR_ERR(regmap); > + } > + > + return st_lsm6dsx_probe(&i3cdev->dev, 0, hw_data->id, > + hw_data->name, regmap); > +} > + > + > +static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = { > + I3C_DEVICE(0x0104, 0x006C, &hw_data[0]), > + { /* sentinel */ }, > +}; > +MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids); > + > +static struct i3c_driver st_lsm6dsx_driver = { > + .driver.name = "st_lsm6dsx_i3c", > + .probe = st_lsm6dsx_i3c_probe, > + .id_table = st_lsm6dsx_i3c_ids, You should probably set the pm_ops here (st_lsm6dsx_pm_ops). > +}; > +module_i3c_driver(st_lsm6dsx_driver); > + > +MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>"); > +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver"); > +MODULE_LICENSE("GPL v2"); > + You can remove this blank line.
> > On Mon, 15 Apr 2019 21:19:41 +0200 > Vitor Soares <vitor.soares@synopsys.com> wrote: > > > For today the st_lsm6dsx driver support lsm6dso sensor only in > > spi and i2c mode. > > > > The lsm6dso is also i3c capable so lets give i3c support to it. > > > > Signed-off-by: Vitor Soares <vitor.soares@synopsys.com> > > --- > > drivers/iio/imu/st_lsm6dsx/Kconfig | 8 +++- > > drivers/iio/imu/st_lsm6dsx/Makefile | 1 + > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 67 +++++++++++++++++++++++++++++ > > 3 files changed, 75 insertions(+), 1 deletion(-) > > create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > > > > diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig > > index 094fd00..1ab9bbf 100644 > > --- a/drivers/iio/imu/st_lsm6dsx/Kconfig > > +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig > > @@ -1,11 +1,12 @@ > > > > config IIO_ST_LSM6DSX > > tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors" > > - depends on (I2C || SPI) > > + depends on (I2C || SPI || I3C) > > select IIO_BUFFER > > select IIO_KFIFO_BUF > > select IIO_ST_LSM6DSX_I2C if (I2C) > > select IIO_ST_LSM6DSX_SPI if (SPI_MASTER) > > + select IIO_ST_LSM6DSX_I3C if (I3C) > > help > > Say yes here to build support for STMicroelectronics LSM6DSx imu > > sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, > > @@ -23,3 +24,8 @@ config IIO_ST_LSM6DSX_SPI > > tristate > > depends on IIO_ST_LSM6DSX > > select REGMAP_SPI > > + > > +config IIO_ST_LSM6DSX_I3C > > + tristate > > + depends on IIO_ST_LSM6DSX > > + select REGMAP_I3C > > diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile > > index e5f733c..c676965 100644 > > --- a/drivers/iio/imu/st_lsm6dsx/Makefile > > +++ b/drivers/iio/imu/st_lsm6dsx/Makefile > > @@ -4,3 +4,4 @@ st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \ > > obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o > > obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o > > obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o > > +obj-$(CONFIG_IIO_ST_LSM6DSX_I3C) += st_lsm6dsx_i3c.o > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > > new file mode 100644 > > index 0000000..2df5e70 > > --- /dev/null > > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > > @@ -0,0 +1,67 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates. > > + * > > + * Author: Vitor Soares <vitor.soares@synopsys.com> > > + */ > > + > > +#include <linux/kernel.h> > > +#include <linux/module.h> > > +#include <linux/i3c/device.h> > > +#include <linux/i3c/master.h> > > +#include <linux/slab.h> > > +#include <linux/of.h> > > +#include <linux/regmap.h> > > + > > +#include "st_lsm6dsx.h" > > + > > +#define NAME_SIZE 32 > > + > > +struct st_lsm6dsx_i3c_data { > > + char name[NAME_SIZE]; > > const char *name; > > > + enum st_lsm6dsx_hw_id id; > > +}; > > + > > +static const struct st_lsm6dsx_i3c_data hw_data[] = { > > No need to make it an array, and it should probably be named > st_lsm6dso_data not hw_data. I guess it will be used even for future devices so I would prefer to make it an array with a 'general' name Regards, Lorenzo > > > + { ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID }, > > +}; > > + > > +static const struct regmap_config st_lsm6dsx_i3c_regmap_config = { > > + .reg_bits = 8, > > + .val_bits = 8, > > +}; > > + > > +static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev) > > +{ > > + const struct i3c_device_id *id = i3c_get_device_id(i3cdev); > > i3c_device_match_id(i3cdev, > st_lsm6dsx_i3c_ids); > > > + const struct st_lsm6dsx_i3c_data *hw_data = id->data; > > + struct regmap *regmap; > > + > > + regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config); > > + if (IS_ERR(regmap)) { > > + dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n", > > + (int)PTR_ERR(regmap)); > > + return PTR_ERR(regmap); > > + } > > + > > + return st_lsm6dsx_probe(&i3cdev->dev, 0, hw_data->id, > > + hw_data->name, regmap); > > +} > > + > > + > > +static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = { > > + I3C_DEVICE(0x0104, 0x006C, &hw_data[0]), > > + { /* sentinel */ }, > > +}; > > +MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids); > > + > > +static struct i3c_driver st_lsm6dsx_driver = { > > + .driver.name = "st_lsm6dsx_i3c", > > + .probe = st_lsm6dsx_i3c_probe, > > + .id_table = st_lsm6dsx_i3c_ids, > > You should probably set the pm_ops here (st_lsm6dsx_pm_ops). > > > +}; > > +module_i3c_driver(st_lsm6dsx_driver); > > + > > +MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>"); > > +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver"); > > +MODULE_LICENSE("GPL v2"); > > + > > You can remove this blank line. >
On Tue, 16 Apr 2019 09:58:33 +0200 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> wrote: > > > > On Mon, 15 Apr 2019 21:19:41 +0200 > > Vitor Soares <vitor.soares@synopsys.com> wrote: > > > > > For today the st_lsm6dsx driver support lsm6dso sensor only in > > > spi and i2c mode. > > > > > > The lsm6dso is also i3c capable so lets give i3c support to it. > > > > > > Signed-off-by: Vitor Soares <vitor.soares@synopsys.com> > > > --- > > > drivers/iio/imu/st_lsm6dsx/Kconfig | 8 +++- > > > drivers/iio/imu/st_lsm6dsx/Makefile | 1 + > > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 67 +++++++++++++++++++++++++++++ > > > 3 files changed, 75 insertions(+), 1 deletion(-) > > > create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > > > > > > diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig > > > index 094fd00..1ab9bbf 100644 > > > --- a/drivers/iio/imu/st_lsm6dsx/Kconfig > > > +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig > > > @@ -1,11 +1,12 @@ > > > > > > config IIO_ST_LSM6DSX > > > tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors" > > > - depends on (I2C || SPI) > > > + depends on (I2C || SPI || I3C) > > > select IIO_BUFFER > > > select IIO_KFIFO_BUF > > > select IIO_ST_LSM6DSX_I2C if (I2C) > > > select IIO_ST_LSM6DSX_SPI if (SPI_MASTER) > > > + select IIO_ST_LSM6DSX_I3C if (I3C) > > > help > > > Say yes here to build support for STMicroelectronics LSM6DSx imu > > > sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, > > > @@ -23,3 +24,8 @@ config IIO_ST_LSM6DSX_SPI > > > tristate > > > depends on IIO_ST_LSM6DSX > > > select REGMAP_SPI > > > + > > > +config IIO_ST_LSM6DSX_I3C > > > + tristate > > > + depends on IIO_ST_LSM6DSX > > > + select REGMAP_I3C > > > diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile > > > index e5f733c..c676965 100644 > > > --- a/drivers/iio/imu/st_lsm6dsx/Makefile > > > +++ b/drivers/iio/imu/st_lsm6dsx/Makefile > > > @@ -4,3 +4,4 @@ st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \ > > > obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o > > > obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o > > > obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o > > > +obj-$(CONFIG_IIO_ST_LSM6DSX_I3C) += st_lsm6dsx_i3c.o > > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > > > new file mode 100644 > > > index 0000000..2df5e70 > > > --- /dev/null > > > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > > > @@ -0,0 +1,67 @@ > > > +// SPDX-License-Identifier: GPL-2.0 > > > +/* > > > + * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates. > > > + * > > > + * Author: Vitor Soares <vitor.soares@synopsys.com> > > > + */ > > > + > > > +#include <linux/kernel.h> > > > +#include <linux/module.h> > > > +#include <linux/i3c/device.h> > > > +#include <linux/i3c/master.h> > > > +#include <linux/slab.h> > > > +#include <linux/of.h> > > > +#include <linux/regmap.h> > > > + > > > +#include "st_lsm6dsx.h" > > > + > > > +#define NAME_SIZE 32 > > > + > > > +struct st_lsm6dsx_i3c_data { > > > + char name[NAME_SIZE]; > > > > const char *name; > > > > > + enum st_lsm6dsx_hw_id id; > > > +}; > > > + > > > +static const struct st_lsm6dsx_i3c_data hw_data[] = { > > > > No need to make it an array, and it should probably be named > > st_lsm6dso_data not hw_data. > > I guess it will be used even for future devices so I would prefer to > make it an array with a 'general' name I find it more error-prone to reference an array with an opaque index number than reference an instance with a name that clearly reflects what HW it describes (see the I3C_DEVICE() entry at the end of the driver), but okay. > > Regards, > Lorenzo > > > > > > + { ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID }, > > > +}; > > > + > > > +static const struct regmap_config st_lsm6dsx_i3c_regmap_config = { > > > + .reg_bits = 8, > > > + .val_bits = 8, > > > +}; > > > + > > > +static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev) > > > +{ > > > + const struct i3c_device_id *id = i3c_get_device_id(i3cdev); > > > > i3c_device_match_id(i3cdev, > > st_lsm6dsx_i3c_ids); > > > > > + const struct st_lsm6dsx_i3c_data *hw_data = id->data; > > > + struct regmap *regmap; > > > + > > > + regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config); > > > + if (IS_ERR(regmap)) { > > > + dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n", > > > + (int)PTR_ERR(regmap)); > > > + return PTR_ERR(regmap); > > > + } > > > + > > > + return st_lsm6dsx_probe(&i3cdev->dev, 0, hw_data->id, > > > + hw_data->name, regmap); > > > +} > > > + > > > + > > > +static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = { > > > + I3C_DEVICE(0x0104, 0x006C, &hw_data[0]), > > > + { /* sentinel */ }, > > > +}; > > > +MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids); > > > + > > > +static struct i3c_driver st_lsm6dsx_driver = { > > > + .driver.name = "st_lsm6dsx_i3c", > > > + .probe = st_lsm6dsx_i3c_probe, > > > + .id_table = st_lsm6dsx_i3c_ids, > > > > You should probably set the pm_ops here (st_lsm6dsx_pm_ops). > > > > > +}; > > > +module_i3c_driver(st_lsm6dsx_driver); > > > + > > > +MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>"); > > > +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver"); > > > +MODULE_LICENSE("GPL v2"); > > > + > > > > You can remove this blank line. > > > >
HI Lorenzo, From: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Date: Mon, Apr 15, 2019 at 23:17:50 > > > > For today the st_lsm6dsx driver support lsm6dso sensor only in > > spi and i2c mode. > > > > The lsm6dso is also i3c capable so lets give i3c support to it. > > > > Hi Vitor, > > thx, this is very cool :) > Just a couple of nit inline > > Regards, > Lorenzo > > > Signed-off-by: Vitor Soares <vitor.soares@synopsys.com> > > --- > > drivers/iio/imu/st_lsm6dsx/Kconfig | 8 +++- > > drivers/iio/imu/st_lsm6dsx/Makefile | 1 + > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 67 +++++++++++++++++++++++++++++ > > 3 files changed, 75 insertions(+), 1 deletion(-) > > create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > > > > diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig > > index 094fd00..1ab9bbf 100644 > > --- a/drivers/iio/imu/st_lsm6dsx/Kconfig > > +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig > > @@ -1,11 +1,12 @@ > > > > config IIO_ST_LSM6DSX > > tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors" > > - depends on (I2C || SPI) > > + depends on (I2C || SPI || I3C) > > select IIO_BUFFER > > select IIO_KFIFO_BUF > > select IIO_ST_LSM6DSX_I2C if (I2C) > > select IIO_ST_LSM6DSX_SPI if (SPI_MASTER) > > + select IIO_ST_LSM6DSX_I3C if (I3C) > > help > > Say yes here to build support for STMicroelectronics LSM6DSx imu > > sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, > > @@ -23,3 +24,8 @@ config IIO_ST_LSM6DSX_SPI > > tristate > > depends on IIO_ST_LSM6DSX > > select REGMAP_SPI > > + > > +config IIO_ST_LSM6DSX_I3C > > + tristate > > + depends on IIO_ST_LSM6DSX > > + select REGMAP_I3C > > diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile > > index e5f733c..c676965 100644 > > --- a/drivers/iio/imu/st_lsm6dsx/Makefile > > +++ b/drivers/iio/imu/st_lsm6dsx/Makefile > > @@ -4,3 +4,4 @@ st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \ > > obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o > > obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o > > obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o > > +obj-$(CONFIG_IIO_ST_LSM6DSX_I3C) += st_lsm6dsx_i3c.o > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > > new file mode 100644 > > index 0000000..2df5e70 > > --- /dev/null > > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > > @@ -0,0 +1,67 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates. > > + * > > + * Author: Vitor Soares <vitor.soares@synopsys.com> > > + */ > > + > > +#include <linux/kernel.h> > > +#include <linux/module.h> > > +#include <linux/i3c/device.h> > > +#include <linux/i3c/master.h> > > +#include <linux/slab.h> > > +#include <linux/of.h> > > +#include <linux/regmap.h> > > + > > +#include "st_lsm6dsx.h" > > + > > +#define NAME_SIZE 32 > > + > > +struct st_lsm6dsx_i3c_data { > > + char name[NAME_SIZE]; > > + enum st_lsm6dsx_hw_id id; > > +}; > > + > > +static const struct st_lsm6dsx_i3c_data hw_data[] = { > > + { ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID }, > > +}; > > + > > +static const struct regmap_config st_lsm6dsx_i3c_regmap_config = { > > + .reg_bits = 8, > > + .val_bits = 8, > > +}; > > + > > +static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev) > > +{ > > + const struct i3c_device_id *id = i3c_get_device_id(i3cdev); > > + const struct st_lsm6dsx_i3c_data *hw_data = id->data; > > + struct regmap *regmap; > > + > > + regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config); > > + if (IS_ERR(regmap)) { > > + dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n", > > + (int)PTR_ERR(regmap)); > > + return PTR_ERR(regmap); > > + } > > + > > + return st_lsm6dsx_probe(&i3cdev->dev, 0, hw_data->id, > > + hw_data->name, regmap); > > In order to support the hw FIFO, I guess you are planning to support > interrupts/IBI here My idea is to register the ibi and handler in this file. The handler would call a buffer function passing the device and payload. On st_lsm6dsx_probe we can add a flag for IBI configuration on the sensor side. > > > +} > > + > > please remove 'new line' here Sure. > > > + > > +static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = { > > + I3C_DEVICE(0x0104, 0x006C, &hw_data[0]), > > + { /* sentinel */ }, > > +}; > > +MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids); > > + > > +static struct i3c_driver st_lsm6dsx_driver = { > > + .driver.name = "st_lsm6dsx_i3c", > > + .probe = st_lsm6dsx_i3c_probe, > > + .id_table = st_lsm6dsx_i3c_ids, > > +}; > > +module_i3c_driver(st_lsm6dsx_driver); > > + > > +MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>"); > > +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver"); > > +MODULE_LICENSE("GPL v2"); > > + > > -- > > 2.7.4 > > > > > -- > UNIX is Sexy: who | grep -i blonde | talk; cd ~; wine; talk; touch; > unzip; touch; strip; gasp; finger; gasp; mount; fsck; more; yes; gasp; > umount; make clean; sleep Thanks for your feedback. Best regards, Vitor Soares
Hi Boris and Lorenzo, From: Boris Brezillon <boris.brezillon@collabora.com> Date: Tue, Apr 16, 2019 at 09:05:40 > On Tue, 16 Apr 2019 09:58:33 +0200 > Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> wrote: > > > > > > > On Mon, 15 Apr 2019 21:19:41 +0200 > > > Vitor Soares <vitor.soares@synopsys.com> wrote: > > > > > > > For today the st_lsm6dsx driver support lsm6dso sensor only in > > > > spi and i2c mode. > > > > > > > > The lsm6dso is also i3c capable so lets give i3c support to it. > > > > > > > > Signed-off-by: Vitor Soares <vitor.soares@synopsys.com> > > > > --- > > > > drivers/iio/imu/st_lsm6dsx/Kconfig | 8 +++- > > > > drivers/iio/imu/st_lsm6dsx/Makefile | 1 + > > > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 67 +++++++++++++++++++++++++++++ > > > > 3 files changed, 75 insertions(+), 1 deletion(-) > > > > create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > > > > > > > > diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig > > > > index 094fd00..1ab9bbf 100644 > > > > --- a/drivers/iio/imu/st_lsm6dsx/Kconfig > > > > +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig > > > > @@ -1,11 +1,12 @@ > > > > > > > > config IIO_ST_LSM6DSX > > > > tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors" > > > > - depends on (I2C || SPI) > > > > + depends on (I2C || SPI || I3C) > > > > select IIO_BUFFER > > > > select IIO_KFIFO_BUF > > > > select IIO_ST_LSM6DSX_I2C if (I2C) > > > > select IIO_ST_LSM6DSX_SPI if (SPI_MASTER) > > > > + select IIO_ST_LSM6DSX_I3C if (I3C) > > > > help > > > > Say yes here to build support for STMicroelectronics LSM6DSx imu > > > > sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, > > > > @@ -23,3 +24,8 @@ config IIO_ST_LSM6DSX_SPI > > > > tristate > > > > depends on IIO_ST_LSM6DSX > > > > select REGMAP_SPI > > > > + > > > > +config IIO_ST_LSM6DSX_I3C > > > > + tristate > > > > + depends on IIO_ST_LSM6DSX > > > > + select REGMAP_I3C > > > > diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile > > > > index e5f733c..c676965 100644 > > > > --- a/drivers/iio/imu/st_lsm6dsx/Makefile > > > > +++ b/drivers/iio/imu/st_lsm6dsx/Makefile > > > > @@ -4,3 +4,4 @@ st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \ > > > > obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o > > > > obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o > > > > obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o > > > > +obj-$(CONFIG_IIO_ST_LSM6DSX_I3C) += st_lsm6dsx_i3c.o > > > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > > > > new file mode 100644 > > > > index 0000000..2df5e70 > > > > --- /dev/null > > > > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > > > > @@ -0,0 +1,67 @@ > > > > +// SPDX-License-Identifier: GPL-2.0 > > > > +/* > > > > + * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates. > > > > + * > > > > + * Author: Vitor Soares <vitor.soares@synopsys.com> > > > > + */ > > > > + > > > > +#include <linux/kernel.h> > > > > +#include <linux/module.h> > > > > +#include <linux/i3c/device.h> > > > > +#include <linux/i3c/master.h> > > > > +#include <linux/slab.h> > > > > +#include <linux/of.h> > > > > +#include <linux/regmap.h> > > > > + > > > > +#include "st_lsm6dsx.h" > > > > + > > > > +#define NAME_SIZE 32 > > > > + > > > > +struct st_lsm6dsx_i3c_data { > > > > + char name[NAME_SIZE]; > > > > > > const char *name; I will fix this next patch. > > > > > > > + enum st_lsm6dsx_hw_id id; > > > > +}; > > > > + > > > > +static const struct st_lsm6dsx_i3c_data hw_data[] = { > > > > > > No need to make it an array, and it should probably be named > > > st_lsm6dso_data not hw_data. > > > > I guess it will be used even for future devices so I would prefer to > > make it an array with a 'general' name The idea is that one. Are you ok with hw_data name? Should I add the lsm6dsr support here or send in a different patch? > > I find it more error-prone to reference an array with an opaque index > number than reference an instance with a name that clearly reflects > what HW it describes (see the I3C_DEVICE() entry at the end of the > driver), but okay. I will address this next version. > > > > > Regards, > > Lorenzo > > > > > > > > > + { ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID }, > > > > +}; > > > > + > > > > +static const struct regmap_config st_lsm6dsx_i3c_regmap_config = { > > > > + .reg_bits = 8, > > > > + .val_bits = 8, > > > > +}; > > > > + > > > > +static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev) > > > > +{ > > > > + const struct i3c_device_id *id = i3c_get_device_id(i3cdev); > > > > > > i3c_device_match_id(i3cdev, > > > st_lsm6dsx_i3c_ids); > > > > > > > + const struct st_lsm6dsx_i3c_data *hw_data = id->data; > > > > + struct regmap *regmap; > > > > + > > > > + regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config); > > > > + if (IS_ERR(regmap)) { > > > > + dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n", > > > > + (int)PTR_ERR(regmap)); > > > > + return PTR_ERR(regmap); > > > > + } > > > > + > > > > + return st_lsm6dsx_probe(&i3cdev->dev, 0, hw_data->id, > > > > + hw_data->name, regmap); > > > > +} > > > > + > > > > + > > > > +static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = { > > > > + I3C_DEVICE(0x0104, 0x006C, &hw_data[0]), > > > > + { /* sentinel */ }, > > > > +}; > > > > +MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids); > > > > + > > > > +static struct i3c_driver st_lsm6dsx_driver = { > > > > + .driver.name = "st_lsm6dsx_i3c", > > > > + .probe = st_lsm6dsx_i3c_probe, > > > > + .id_table = st_lsm6dsx_i3c_ids, > > > > > > You should probably set the pm_ops here (st_lsm6dsx_pm_ops). > > > > > > > +}; > > > > +module_i3c_driver(st_lsm6dsx_driver); > > > > + > > > > +MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>"); > > > > +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver"); > > > > +MODULE_LICENSE("GPL v2"); > > > > + > > > > > > You can remove this blank line. > > > > > > > Best regards, Vitor Soares
Hi Boris, From: Boris Brezillon <boris.brezillon@collabora.com> Date: Tue, Apr 16, 2019 at 07:25:39 > > +MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids); > > + > > +static struct i3c_driver st_lsm6dsx_driver = { > > + .driver.name = "st_lsm6dsx_i3c", > > + .probe = st_lsm6dsx_i3c_probe, > > + .id_table = st_lsm6dsx_i3c_ids, > > You should probably set the pm_ops here (st_lsm6dsx_pm_ops). Yes, I missed that. > > > +}; > > +module_i3c_driver(st_lsm6dsx_driver); > > + > > +MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>"); > > +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver"); > > +MODULE_LICENSE("GPL v2"); > > + > > You can remove this blank line. Thanks for your feedback. Best regards, Vitor Soares
diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig index 094fd00..1ab9bbf 100644 --- a/drivers/iio/imu/st_lsm6dsx/Kconfig +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig @@ -1,11 +1,12 @@ config IIO_ST_LSM6DSX tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors" - depends on (I2C || SPI) + depends on (I2C || SPI || I3C) select IIO_BUFFER select IIO_KFIFO_BUF select IIO_ST_LSM6DSX_I2C if (I2C) select IIO_ST_LSM6DSX_SPI if (SPI_MASTER) + select IIO_ST_LSM6DSX_I3C if (I3C) help Say yes here to build support for STMicroelectronics LSM6DSx imu sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, @@ -23,3 +24,8 @@ config IIO_ST_LSM6DSX_SPI tristate depends on IIO_ST_LSM6DSX select REGMAP_SPI + +config IIO_ST_LSM6DSX_I3C + tristate + depends on IIO_ST_LSM6DSX + select REGMAP_I3C diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile index e5f733c..c676965 100644 --- a/drivers/iio/imu/st_lsm6dsx/Makefile +++ b/drivers/iio/imu/st_lsm6dsx/Makefile @@ -4,3 +4,4 @@ st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \ obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o +obj-$(CONFIG_IIO_ST_LSM6DSX_I3C) += st_lsm6dsx_i3c.o diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c new file mode 100644 index 0000000..2df5e70 --- /dev/null +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates. + * + * Author: Vitor Soares <vitor.soares@synopsys.com> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i3c/device.h> +#include <linux/i3c/master.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/regmap.h> + +#include "st_lsm6dsx.h" + +#define NAME_SIZE 32 + +struct st_lsm6dsx_i3c_data { + char name[NAME_SIZE]; + enum st_lsm6dsx_hw_id id; +}; + +static const struct st_lsm6dsx_i3c_data hw_data[] = { + { ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID }, +}; + +static const struct regmap_config st_lsm6dsx_i3c_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev) +{ + const struct i3c_device_id *id = i3c_get_device_id(i3cdev); + const struct st_lsm6dsx_i3c_data *hw_data = id->data; + struct regmap *regmap; + + regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n", + (int)PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + return st_lsm6dsx_probe(&i3cdev->dev, 0, hw_data->id, + hw_data->name, regmap); +} + + +static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = { + I3C_DEVICE(0x0104, 0x006C, &hw_data[0]), + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids); + +static struct i3c_driver st_lsm6dsx_driver = { + .driver.name = "st_lsm6dsx_i3c", + .probe = st_lsm6dsx_i3c_probe, + .id_table = st_lsm6dsx_i3c_ids, +}; +module_i3c_driver(st_lsm6dsx_driver); + +MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>"); +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver"); +MODULE_LICENSE("GPL v2");
For today the st_lsm6dsx driver support lsm6dso sensor only in spi and i2c mode. The lsm6dso is also i3c capable so lets give i3c support to it. Signed-off-by: Vitor Soares <vitor.soares@synopsys.com> --- drivers/iio/imu/st_lsm6dsx/Kconfig | 8 +++- drivers/iio/imu/st_lsm6dsx/Makefile | 1 + drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 67 +++++++++++++++++++++++++++++ 3 files changed, 75 insertions(+), 1 deletion(-) create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c +