Show patches with: none      |   18575 patches
« 1 2 3 4185 186 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v6,3/8] iio: adc: stm32: Fixing err code to not indicate success IIO: Use device_for_each_child_scope() - 1 - --- 2024-03-30 Jonathan Cameron Accepted
[v6,2/8] iio: adc: qcom-spmi-adc5: Use device_for_each_child_node_scoped() IIO: Use device_for_each_child_scope() - 1 - --- 2024-03-30 Jonathan Cameron Accepted
[v6,1/8] iio: adc: mcp3564: Use device_for_each_child_node_scoped() IIO: Use device_for_each_child_scope() - - - --- 2024-03-30 Jonathan Cameron New
[3/3] dt-bindings: adc: Document XuanTie TH1520 ADC iio: adc: add ADC driver for XuanTie TH1520 SoC - - - --- 2024-03-29 Wei Fu Changes Requested
[2/3] riscv: dts: thead: Add XuanTie TH1520 ADC device node iio: adc: add ADC driver for XuanTie TH1520 SoC - - - --- 2024-03-29 Wei Fu Changes Requested
[1/3] drivers/iio/adc: Add XuanTie TH1520 ADC driver iio: adc: add ADC driver for XuanTie TH1520 SoC - - - --- 2024-03-29 Wei Fu Changes Requested
[2/2] dt-bindings: iio: imu: add icm42688 inside inv_icm42600 iio: imu: inv_icm42600: add support of ICM-42688-P - - - --- 2024-03-29 inv.git-commit@tdk.com Changes Requested
[1/2] iio: imu: inv_icm42600: add support of ICM-42688-P iio: imu: inv_icm42600: add support of ICM-42688-P - - - --- 2024-03-29 inv.git-commit@tdk.com Changes Requested
[v6,7/7] iio: accel: adxl345: Add spi-3wire option iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-29 Lothar Rubusch Changes Requested
[v6,6/7] iio: accel: adxl345: Add comment to probe iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-29 Lothar Rubusch Changes Requested
[v6,5/7] iio: accel: adxl345: Pass function pointer to core iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-29 Lothar Rubusch Changes Requested
[v6,4/7] dt-bindings: iio: accel: adxl345: Add spi-3wire iio: accel: adxl345: Add spi-3wire feature - 1 - --- 2024-03-29 Lothar Rubusch Changes Requested
[v6,3/7] iio: accel: adxl345: Move defines to header iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-29 Lothar Rubusch Changes Requested
[v6,2/7] iio: accel: adxl345: Group bus configuration iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-29 Lothar Rubusch Changes Requested
[v6,1/7] iio: accel: adxl345: Make data_range obsolete iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-29 Lothar Rubusch Changes Requested
[v2] iio: adc: ad7944: use spi_optimize_message() [v2] iio: adc: ad7944: use spi_optimize_message() - - - --- 2024-03-28 David Lechner Accepted
[v4,6/6] iio: common: scmi_iio: convert to dev_err_probe() iio: temperature: ltc2983: small improvements - - - --- 2024-03-28 Nuno Sa via B4 Relay Changes Requested
[v4,5/6] iio: backend: make use dev_errp_probe() iio: temperature: ltc2983: small improvements - - - --- 2024-03-28 Nuno Sa via B4 Relay Changes Requested
[v4,4/6] iio: temperature: ltc2983: support vdd regulator iio: temperature: ltc2983: small improvements - - - --- 2024-03-28 Nuno Sa via B4 Relay Changes Requested
[v4,3/6] dt-bindings: iio: temperature: ltc2983: document power supply iio: temperature: ltc2983: small improvements - 1 - --- 2024-03-28 Nuno Sa via B4 Relay Changes Requested
[v4,2/6] iio: temperature: ltc2983: convert to dev_err_probe() iio: temperature: ltc2983: small improvements - - - --- 2024-03-28 Nuno Sa via B4 Relay Changes Requested
[v4,1/6] printk: add new dev_errp_probe() helper iio: temperature: ltc2983: small improvements - - - --- 2024-03-28 Nuno Sa via B4 Relay Changes Requested
[10/10] iio: dac: support the ad9739a RF DAC iio: dac: support IIO backends on the output direction - - - --- 2024-03-28 Nuno Sa via B4 Relay Changes Requested
[09/10] iio: dac: add support for AXI DAC IP core iio: dac: support IIO backends on the output direction - - - --- 2024-03-28 Nuno Sa via B4 Relay Changes Requested
[08/10] iio: backend: add new functionality iio: dac: support IIO backends on the output direction - - - --- 2024-03-28 Nuno Sa via B4 Relay Changes Requested
[07/10] dt-bindings: iio: dac: add bindings doc for AD9739A iio: dac: support IIO backends on the output direction - - - --- 2024-03-28 Nuno Sa via B4 Relay Changes Requested
[06/10] dt-bindings: iio: dac: add bindings doc for AXI DAC driver iio: dac: support IIO backends on the output direction - - - --- 2024-03-28 Nuno Sa via B4 Relay Changes Requested
[05/10] iio: buffer-dmaengine: Enable write support iio: dac: support IIO backends on the output direction - 1 - --- 2024-03-28 Nuno Sa via B4 Relay Changes Requested
[04/10] iio: buffer-dmaengine: Support specifying buffer direction iio: dac: support IIO backends on the output direction - 1 - --- 2024-03-28 Nuno Sa via B4 Relay Changes Requested
[03/10] iio: buffer-dma: Enable buffer write support iio: dac: support IIO backends on the output direction - 1 - --- 2024-03-28 Nuno Sa via B4 Relay Changes Requested
[02/10] iio: buffer-dma: Rename iio_dma_buffer_data_available() iio: dac: support IIO backends on the output direction - - - --- 2024-03-28 Nuno Sa via B4 Relay Changes Requested
[01/10] iio: buffer: add helper for setting direction iio: dac: support IIO backends on the output direction - - - --- 2024-03-28 Nuno Sa via B4 Relay Changes Requested
[next] iio: addac: ad74115: remove redundant if statement [next] iio: addac: ad74115: remove redundant if statement - - - --- 2024-03-28 Colin Ian King Changes Requested
[RFC,7/7] Input: mpr121: Use devm_regulator_get_enable_get_voltage() regulator: new APIs for voltage reference supplies - 1 - --- 2024-03-27 David Lechner Changes Requested
[RFC,6/7] staging: iio: impedance-analyzer: admv1013: Use devm_regulator_get_enable_get_voltage() regulator: new APIs for voltage reference supplies - 1 - --- 2024-03-27 David Lechner Changes Requested
[RFC,5/7] iio: frequency: admv1013: Use devm_regulator_get_enable_get_voltage() regulator: new APIs for voltage reference supplies - 1 - --- 2024-03-27 David Lechner Changes Requested
[RFC,4/7] iio: addac: ad74115: Use devm_regulator_get_enable_get_voltage() regulator: new APIs for voltage reference supplies - - - --- 2024-03-27 David Lechner Changes Requested
[RFC,3/7] hwmon: (da9052) Use devm_regulator_get_enable_get_voltage() regulator: new APIs for voltage reference supplies - 1 - --- 2024-03-27 David Lechner Changes Requested
[RFC,2/7] hwmon: (adc128d818) Use devm_regulator_get_optional_enable_get_voltage() regulator: new APIs for voltage reference supplies - 1 - --- 2024-03-27 David Lechner Changes Requested
[RFC,1/7] regulator: devres: add APIs for reference supplies regulator: new APIs for voltage reference supplies - - - --- 2024-03-27 David Lechner Changes Requested
[v5,7/7] iio: accel: adxl345: Add spi-3wire option iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-27 Lothar Rubusch Changes Requested
[v5,6/7] iio: accel: adxl345: Add comment to probe iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-27 Lothar Rubusch Changes Requested
[v5,5/7] iio: accel: adxl345: Pass function pointer to core iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-27 Lothar Rubusch Changes Requested
[v5,4/7] dt-bindings: iio: accel: adxl345: Add spi-3wire iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-27 Lothar Rubusch Changes Requested
[v5,3/7] iio: accel: adxl345: Move defines to header iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-27 Lothar Rubusch Changes Requested
[v5,2/7] iio: accel: adxl345: Group bus configuration iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-27 Lothar Rubusch Changes Requested
[v5,1/7] iio: accel: adxl345: Make data_range obsolete iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-27 Lothar Rubusch Changes Requested
iio: pressure: dps310: support negative pressure and temperature values iio: pressure: dps310: support negative pressure and temperature values - - - --- 2024-03-27 Thomas Haemmerle Changes Requested
[RFC,2/2] iio: accel: mxc4005: Reset chip on probe() and resume() iio: accel: mxc4005: IRQ fixes + reset chip on probe() - - - --- 2024-03-26 Hans de Goede Accepted
[RFC,1/2] iio: accel: mxc4005: Interrupt handling fixes iio: accel: mxc4005: IRQ fixes + reset chip on probe() - - - --- 2024-03-26 Hans de Goede Accepted
iio: adc: ad7944: use spi_optimize_message() iio: adc: ad7944: use spi_optimize_message() - - - --- 2024-03-25 David Lechner Changes Requested
[2/5] iio: dac: ti-dac5571: Add DAC081C081 support arm64: dts: Add device tree source for the Au-Zone Maivin AI Vision Starter Kit - 1 - --- 2024-03-25 Laurent Pinchart Accepted
[1/5] dt-bindings: iio: dac: ti,dac5571: Add DAC081C081 support arm64: dts: Add device tree source for the Au-Zone Maivin AI Vision Starter Kit - 1 - --- 2024-03-25 Laurent Pinchart Accepted
[v3] iio: adc: ad7944: simplify adi,spi-mode property parsing [v3] iio: adc: ad7944: simplify adi,spi-mode property parsing - - - --- 2024-03-25 David Lechner Accepted
iio: dht11: set debug log level for parsing error messages iio: dht11: set debug log level for parsing error messages - - - --- 2024-03-25 George Stark Rejected
[v4,7/7] iio: accel: adxl345: Add spi-3wire option iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-25 Lothar Rubusch Changes Requested
[v4,6/7] iio: accel: adxl345: Add comment to probe iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-25 Lothar Rubusch Changes Requested
[v4,5/7] iio: accel: adxl345: Pass function pointer to core iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-25 Lothar Rubusch Changes Requested
[v4,4/7] dt-bindings: iio: accel: adxl345: Add spi-3wire iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-25 Lothar Rubusch Changes Requested
[v4,3/7] iio: accel: adxl345: Move defines to header iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-25 Lothar Rubusch Changes Requested
[v4,2/7] iio: accel: adxl345: Group bus configuration iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-25 Lothar Rubusch Changes Requested
[v4,1/7] iio: accel: adxl345: Make data_range obsolete iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-25 Lothar Rubusch Changes Requested
[v2,2/2] iio: health: max30102: add support for max30101 iio: health: max30102: add support for max30101 - - - --- 2024-03-24 Javier Carrasco Accepted
[v2,1/2] dt-bindings: iio: health: maxim,max30102: add max30101 iio: health: max30102: add support for max30101 - 1 - --- 2024-03-24 Javier Carrasco Accepted
iio: pressure: hsc030pa: Use spi_read() iio: pressure: hsc030pa: Use spi_read() - - - --- 2024-03-24 Christophe JAILLET Accepted
[v3,6/6] dt-bindings: iio: accel: adxl345: Add spi-3wire iio: accel: adxl345: Add spi-3wire feature - 1 - --- 2024-03-23 Lothar Rubusch Changes Requested
[v3,5/6] iio: accel: adxl345: Group bus configuration iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-23 Lothar Rubusch Changes Requested
[v3,4/6] iio: accel: adxl345: Remove single info instances iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-23 Lothar Rubusch Changes Requested
[v3,3/6] iio: accel: adxl345: Add spi-3wire option iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-23 Lothar Rubusch Changes Requested
[v3,2/6] iio: accel: adxl345: Make data_range obsolete iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-23 Lothar Rubusch Changes Requested
[v3,1/6] iio: accel: adxl345: Pass function pointer to core iio: accel: adxl345: Add spi-3wire feature - - - --- 2024-03-23 Lothar Rubusch Changes Requested
[2/2] iio: adc: Add support for AD4000 Add support for AD4000 series - - - --- 2024-03-22 Marcelo Schmitt Changes Requested
[1/2] dt-bindings: iio: adc: Add AD4000 Add support for AD4000 series - - - --- 2024-03-22 Marcelo Schmitt Changes Requested
[v2,2/2] docs: iio: new docs for ad7944 driver docs: iio: new docs for ad7944 driver - - - --- 2024-03-22 David Lechner Accepted
[v2,1/2] MAINTAINERS: add Documentation/iio/ to IIO subsystem docs: iio: new docs for ad7944 driver - - - --- 2024-03-22 David Lechner Accepted
[v2,3/3] dt-bindings: iio: accel: adxl345: Add spi-3wire iio: adxl345: add spi-3wire - - - --- 2024-03-22 Lothar Rubusch Changes Requested
[v2,2/3] iio: accel: adxl345: Add spi-3wire feature iio: adxl345: add spi-3wire - - - --- 2024-03-22 Lothar Rubusch Changes Requested
[v2,1/3] iio: accel: adxl345: Update adxl345 iio: adxl345: add spi-3wire - - - --- 2024-03-22 Lothar Rubusch Changes Requested
[2/2] iio: health: max30102: add support for max30101 iio: health: max30102: add support for max30101 - - - --- 2024-03-21 Javier Carrasco Changes Requested
[1/2] dt-bindings: iio: health: maxim,max30102: add max30101 iio: health: max30102: add support for max30101 1 - - --- 2024-03-21 Javier Carrasco Changes Requested
counter: ti-ecap-capture: Utilize COUNTER_COMP_FREQUENCY macro counter: ti-ecap-capture: Utilize COUNTER_COMP_FREQUENCY macro - - - --- 2024-03-21 William Breathitt Gray Handled Elsewhere
[2/2] dt-bindings: iio: adc: nxp,imx93-adc.yaml: Add calibration properties i.MX93 ADC calibration settings - - - --- 2024-03-20 Andrej Picej Changes Requested
[1/2] iio: adc: imx93: Make calibration properties configurable i.MX93 ADC calibration settings - - - --- 2024-03-20 Andrej Picej Changes Requested
[2/2] iio: adxl345: update documentation for spi-3wire iio: adxl345: add spi-3wire and refac - - - --- 2024-03-19 Lothar Rubusch Superseded
[1/2] iio: adxl345: add spi-3wire iio: adxl345: add spi-3wire and refac - - - --- 2024-03-19 Lothar Rubusch Superseded
[v2] iio: adc: ad7944: simplify adi,spi-mode property parsing [v2] iio: adc: ad7944: simplify adi,spi-mode property parsing - - - --- 2024-03-19 David Lechner Accepted
[v5,7/7] iio: adc: ad7380: add support for ad738x-4 4 channels variants iio: adc: add new ad7380 driver - - - --- 2024-03-19 Julien Stephan Changes Requested
[v5,6/7] dt-bindings: iio: adc: ad7380: add support for ad738x-4 4 channels variants iio: adc: add new ad7380 driver 1 - - --- 2024-03-19 Julien Stephan Changes Requested
[v5,5/7] iio: adc: ad7380: prepare for parts with more channels iio: adc: add new ad7380 driver - - - --- 2024-03-19 Julien Stephan Changes Requested
[v5,4/7] iio: adc: ad7380: add support for pseudo-differential parts iio: adc: add new ad7380 driver - - - --- 2024-03-19 Julien Stephan Changes Requested
[v5,3/7] dt-bindings: iio: adc: ad7380: add pseudo-differential parts iio: adc: add new ad7380 driver 1 - - --- 2024-03-19 Julien Stephan Changes Requested
[v5,2/7] iio: adc: ad7380: new driver for AD7380 ADCs iio: adc: add new ad7380 driver - 1 - --- 2024-03-19 Julien Stephan Changes Requested
[v5,1/7] dt-bindings: iio: adc: Add binding for AD7380 ADCs iio: adc: add new ad7380 driver - 1 - --- 2024-03-19 Julien Stephan Changes Requested
[v4,2/4] HID: hid-sensor-custom: Convert sprintf() family to sysfs_emit() family Untitled series #836305 - 1 - --- 2024-03-19 Li Zhijian Handled Elsewhere
[v3,6/6] iio: pressure: Add triggered buffer support for BMP280 driver Series to add triggered buffer support to BMP280 driver - - - --- 2024-03-19 Vasileios Amoiridis Changes Requested
[v3,5/6] iio: pressure: Add timestamp and scan_masks for BMP280 driver Series to add triggered buffer support to BMP280 driver - - - --- 2024-03-19 Vasileios Amoiridis Changes Requested
[v3,4/6] iio: pressure: Add SCALE and RAW values for channels Series to add triggered buffer support to BMP280 driver - - - --- 2024-03-19 Vasileios Amoiridis Changes Requested
[v3,3/6] iio: pressure: Generalize read_{temp/press/humid}() functions Series to add triggered buffer support to BMP280 driver - - - --- 2024-03-19 Vasileios Amoiridis Changes Requested
[v3,2/6] iio: pressure: Introduce new cleanup routines to BMP280 driver *_raw() functions Series to add triggered buffer support to BMP280 driver - - - --- 2024-03-19 Vasileios Amoiridis Changes Requested
[v3,1/6] iio: pressure: BMP280 core driver headers sorting Series to add triggered buffer support to BMP280 driver - 1 - --- 2024-03-19 Vasileios Amoiridis Accepted
« 1 2 3 4185 186 »