| Message ID | 20191011144347.19146-5-miquel.raynal@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Introduce max12xx ADC support | expand |
On Fri, 11 Oct 2019 16:43:43 +0200 Miquel Raynal <miquel.raynal@bootlin.com> wrote: > Maxim's max1027/29/31 series returns the measured voltages with a > resolution of 10 bits. There is a very similar series, max1227/29/31 > which works identically but uses a resolution of 12 bits. Prepare the > support for these chips by turning the 'depth' into a macro parameter > instead of hardcoding it everywhere. Also reorganize just a bit the > macros at the top to avoid repeating tens of lines when adding support > for a new chip. > > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Applied. Thanks, Jonathan > --- > drivers/iio/adc/max1027.c | 74 +++++++++++++++++---------------------- > 1 file changed, 32 insertions(+), 42 deletions(-) > > diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c > index f9b473ee6711..8b449044bef5 100644 > --- a/drivers/iio/adc/max1027.c > +++ b/drivers/iio/adc/max1027.c > @@ -83,7 +83,7 @@ static const struct of_device_id max1027_adc_dt_ids[] = { > MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids); > #endif > > -#define MAX1027_V_CHAN(index) \ > +#define MAX1027_V_CHAN(index, depth) \ > { \ > .type = IIO_VOLTAGE, \ > .indexed = 1, \ > @@ -93,7 +93,7 @@ MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids); > .scan_index = index + 1, \ > .scan_type = { \ > .sign = 'u', \ > - .realbits = 10, \ > + .realbits = depth, \ > .storagebits = 16, \ > .shift = 2, \ > .endianness = IIO_BE, \ > @@ -115,52 +115,42 @@ MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids); > }, \ > } > > +#define MAX1X27_CHANNELS(depth) \ > + MAX1027_T_CHAN, \ > + MAX1027_V_CHAN(0, depth), \ > + MAX1027_V_CHAN(1, depth), \ > + MAX1027_V_CHAN(2, depth), \ > + MAX1027_V_CHAN(3, depth), \ > + MAX1027_V_CHAN(4, depth), \ > + MAX1027_V_CHAN(5, depth), \ > + MAX1027_V_CHAN(6, depth), \ > + MAX1027_V_CHAN(7, depth) > + > +#define MAX1X29_CHANNELS(depth) \ > + MAX1X27_CHANNELS(depth), \ > + MAX1027_V_CHAN(8, depth), \ > + MAX1027_V_CHAN(9, depth), \ > + MAX1027_V_CHAN(10, depth), \ > + MAX1027_V_CHAN(11, depth) > + > +#define MAX1X31_CHANNELS(depth) \ > + MAX1X27_CHANNELS(depth), \ > + MAX1X29_CHANNELS(depth), \ > + MAX1027_V_CHAN(12, depth), \ > + MAX1027_V_CHAN(13, depth), \ > + MAX1027_V_CHAN(14, depth), \ > + MAX1027_V_CHAN(15, depth) > + > static const struct iio_chan_spec max1027_channels[] = { > - MAX1027_T_CHAN, > - MAX1027_V_CHAN(0), > - MAX1027_V_CHAN(1), > - MAX1027_V_CHAN(2), > - MAX1027_V_CHAN(3), > - MAX1027_V_CHAN(4), > - MAX1027_V_CHAN(5), > - MAX1027_V_CHAN(6), > - MAX1027_V_CHAN(7) > + MAX1X27_CHANNELS(10), > }; > > static const struct iio_chan_spec max1029_channels[] = { > - MAX1027_T_CHAN, > - MAX1027_V_CHAN(0), > - MAX1027_V_CHAN(1), > - MAX1027_V_CHAN(2), > - MAX1027_V_CHAN(3), > - MAX1027_V_CHAN(4), > - MAX1027_V_CHAN(5), > - MAX1027_V_CHAN(6), > - MAX1027_V_CHAN(7), > - MAX1027_V_CHAN(8), > - MAX1027_V_CHAN(9), > - MAX1027_V_CHAN(10), > - MAX1027_V_CHAN(11) > + MAX1X29_CHANNELS(10), > }; > > static const struct iio_chan_spec max1031_channels[] = { > - MAX1027_T_CHAN, > - MAX1027_V_CHAN(0), > - MAX1027_V_CHAN(1), > - MAX1027_V_CHAN(2), > - MAX1027_V_CHAN(3), > - MAX1027_V_CHAN(4), > - MAX1027_V_CHAN(5), > - MAX1027_V_CHAN(6), > - MAX1027_V_CHAN(7), > - MAX1027_V_CHAN(8), > - MAX1027_V_CHAN(9), > - MAX1027_V_CHAN(10), > - MAX1027_V_CHAN(11), > - MAX1027_V_CHAN(12), > - MAX1027_V_CHAN(13), > - MAX1027_V_CHAN(14), > - MAX1027_V_CHAN(15) > + MAX1X31_CHANNELS(10), > }; > > static const unsigned long max1027_available_scan_masks[] = { > @@ -284,7 +274,7 @@ static int max1027_read_raw(struct iio_dev *indio_dev, > break; > case IIO_VOLTAGE: > *val = 2500; > - *val2 = 10; > + *val2 = chan->scan_type.realbits; > ret = IIO_VAL_FRACTIONAL_LOG2; > break; > default:
diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c index f9b473ee6711..8b449044bef5 100644 --- a/drivers/iio/adc/max1027.c +++ b/drivers/iio/adc/max1027.c @@ -83,7 +83,7 @@ static const struct of_device_id max1027_adc_dt_ids[] = { MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids); #endif -#define MAX1027_V_CHAN(index) \ +#define MAX1027_V_CHAN(index, depth) \ { \ .type = IIO_VOLTAGE, \ .indexed = 1, \ @@ -93,7 +93,7 @@ MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids); .scan_index = index + 1, \ .scan_type = { \ .sign = 'u', \ - .realbits = 10, \ + .realbits = depth, \ .storagebits = 16, \ .shift = 2, \ .endianness = IIO_BE, \ @@ -115,52 +115,42 @@ MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids); }, \ } +#define MAX1X27_CHANNELS(depth) \ + MAX1027_T_CHAN, \ + MAX1027_V_CHAN(0, depth), \ + MAX1027_V_CHAN(1, depth), \ + MAX1027_V_CHAN(2, depth), \ + MAX1027_V_CHAN(3, depth), \ + MAX1027_V_CHAN(4, depth), \ + MAX1027_V_CHAN(5, depth), \ + MAX1027_V_CHAN(6, depth), \ + MAX1027_V_CHAN(7, depth) + +#define MAX1X29_CHANNELS(depth) \ + MAX1X27_CHANNELS(depth), \ + MAX1027_V_CHAN(8, depth), \ + MAX1027_V_CHAN(9, depth), \ + MAX1027_V_CHAN(10, depth), \ + MAX1027_V_CHAN(11, depth) + +#define MAX1X31_CHANNELS(depth) \ + MAX1X27_CHANNELS(depth), \ + MAX1X29_CHANNELS(depth), \ + MAX1027_V_CHAN(12, depth), \ + MAX1027_V_CHAN(13, depth), \ + MAX1027_V_CHAN(14, depth), \ + MAX1027_V_CHAN(15, depth) + static const struct iio_chan_spec max1027_channels[] = { - MAX1027_T_CHAN, - MAX1027_V_CHAN(0), - MAX1027_V_CHAN(1), - MAX1027_V_CHAN(2), - MAX1027_V_CHAN(3), - MAX1027_V_CHAN(4), - MAX1027_V_CHAN(5), - MAX1027_V_CHAN(6), - MAX1027_V_CHAN(7) + MAX1X27_CHANNELS(10), }; static const struct iio_chan_spec max1029_channels[] = { - MAX1027_T_CHAN, - MAX1027_V_CHAN(0), - MAX1027_V_CHAN(1), - MAX1027_V_CHAN(2), - MAX1027_V_CHAN(3), - MAX1027_V_CHAN(4), - MAX1027_V_CHAN(5), - MAX1027_V_CHAN(6), - MAX1027_V_CHAN(7), - MAX1027_V_CHAN(8), - MAX1027_V_CHAN(9), - MAX1027_V_CHAN(10), - MAX1027_V_CHAN(11) + MAX1X29_CHANNELS(10), }; static const struct iio_chan_spec max1031_channels[] = { - MAX1027_T_CHAN, - MAX1027_V_CHAN(0), - MAX1027_V_CHAN(1), - MAX1027_V_CHAN(2), - MAX1027_V_CHAN(3), - MAX1027_V_CHAN(4), - MAX1027_V_CHAN(5), - MAX1027_V_CHAN(6), - MAX1027_V_CHAN(7), - MAX1027_V_CHAN(8), - MAX1027_V_CHAN(9), - MAX1027_V_CHAN(10), - MAX1027_V_CHAN(11), - MAX1027_V_CHAN(12), - MAX1027_V_CHAN(13), - MAX1027_V_CHAN(14), - MAX1027_V_CHAN(15) + MAX1X31_CHANNELS(10), }; static const unsigned long max1027_available_scan_masks[] = { @@ -284,7 +274,7 @@ static int max1027_read_raw(struct iio_dev *indio_dev, break; case IIO_VOLTAGE: *val = 2500; - *val2 = 10; + *val2 = chan->scan_type.realbits; ret = IIO_VAL_FRACTIONAL_LOG2; break; default:
Maxim's max1027/29/31 series returns the measured voltages with a resolution of 10 bits. There is a very similar series, max1227/29/31 which works identically but uses a resolution of 12 bits. Prepare the support for these chips by turning the 'depth' into a macro parameter instead of hardcoding it everywhere. Also reorganize just a bit the macros at the top to avoid repeating tens of lines when adding support for a new chip. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/iio/adc/max1027.c | 74 +++++++++++++++++---------------------- 1 file changed, 32 insertions(+), 42 deletions(-)