diff mbox series

[v4,7/8] dt-bindings: Add 1027/1029/1031 SPI ADCs as trivial devices

Message ID 20191011144347.19146-8-miquel.raynal@bootlin.com (mailing list archive)
State New, archived
Headers show
Series Introduce max12xx ADC support | expand

Commit Message

Miquel Raynal Oct. 11, 2019, 2:43 p.m. UTC
In the same time, remove the dedicated bindings file which is now
useless.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 .../bindings/iio/adc/max1027-adc.txt          | 22 -------------------
 .../devicetree/bindings/trivial-devices.yaml  |  6 +++++
 2 files changed, 6 insertions(+), 22 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/iio/adc/max1027-adc.txt

Comments

Rob Herring (Arm) Oct. 14, 2019, 3:38 p.m. UTC | #1
On Fri, 11 Oct 2019 16:43:46 +0200, Miquel Raynal wrote:
> In the same time, remove the dedicated bindings file which is now
> useless.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
>  .../bindings/iio/adc/max1027-adc.txt          | 22 -------------------
>  .../devicetree/bindings/trivial-devices.yaml  |  6 +++++
>  2 files changed, 6 insertions(+), 22 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
> 

Acked-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
deleted file mode 100644
index 7b23d68f655c..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
+++ /dev/null
@@ -1,22 +0,0 @@ 
-* Maxim 1027/1029/1031 Analog to Digital Converter (ADC)
-
-Required properties:
-  - compatible: Should be "maxim,max1027" or "maxim,max1029" or "maxim,max1031"
-  - reg: SPI chip select number for the device
-
-Optional properties:
-  - interrupts: IRQ line for the ADC
-  see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-Recommended properties:
-- spi-max-frequency: Definition as per
-                     Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-adc@0 {
-	compatible = "maxim,max1027";
-	reg = <0>;
-	interrupt-parent = <&gpio5>;
-	interrupts = <15 IRQ_TYPE_EDGE_RISING>;
-	spi-max-frequency = <1000000>;
-};
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 870ac52d2225..e0095ecb472f 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -114,6 +114,12 @@  properties:
           - isil,isl68137
             # 5 Bit Programmable, Pulse-Width Modulator
           - maxim,ds1050
+            # 10-bit 8 channels 300ks/s SPI ADC with temperature sensor
+          - maxim,max1027
+            # 10-bit 12 channels 300ks/s SPI ADC with temperature sensor
+          - maxim,max1029
+            # 10-bit 16 channels 300ks/s SPI ADC with temperature sensor
+          - maxim,max1031
             # Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
           - maxim,max1237
             # PECI-to-I2C translator for PECI-to-SMBus/I2C protocol conversion