diff mbox series

[v3,24/27] staging: iio: resolver: ad2s1210: convert DOS mismatch threshold to event attr

Message ID 20230929-ad2s1210-mainline-v3-24-fa4364281745@baylibre.com (mailing list archive)
State Changes Requested
Headers show
Series iio: resolver: move ad2s1210 out of staging | expand

Commit Message

David Lechner Sept. 29, 2023, 5:23 p.m. UTC 
From: David Lechner <david@lechnology.com>

From: David Lechner <dlechner@baylibre.com>

The AD2S1210 has a programmable threshold for the degradation of signal
(DOS) mismatch fault. This fault is triggered when the difference in
voltage between the sine and cosine inputs exceeds the threshold. In
other words, when the magnitude of sine and cosine inputs are equal,
the AC component of the monitor signal is zero and when the magnitudes
of the sine and cosine inputs are not equal, the AC component of the
monitor signal is the difference between the sine and cosine inputs.
So the fault occurs when the magnitude of the AC component of the
monitor signal exceeds the DOS mismatch threshold voltage.

This patch converts the custom device DOS mismatch threshold attribute
to an event magnitude attribute on the monitor signal channel.

The attribute now uses millivolts instead of the raw register value in
accordance with the IIO ABI.

Emitting the event will be implemented in a later patch.

Signed-off-by: David Lechner <dlechner@baylibre.com>
---

v3 changes: This is a new patch in v3

 drivers/staging/iio/resolver/ad2s1210.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

Comments

kernel test robot Oct. 3, 2023, 8:08 p.m. UTC | #1 
Hi David,

kernel test robot noticed the following build warnings:

[auto build test WARNING on 5e99f692d4e32e3250ab18d511894ca797407aec]

url:    https://github.com/intel-lab-lkp/linux/commits/David-Lechner/dt-bindings-iio-resolver-add-devicetree-bindings-for-ad2s1210/20230930-014031
base:   5e99f692d4e32e3250ab18d511894ca797407aec
patch link:    https://lore.kernel.org/r/20230929-ad2s1210-mainline-v3-24-fa4364281745%40baylibre.com
patch subject: [PATCH v3 24/27] staging: iio: resolver: ad2s1210: convert DOS mismatch threshold to event attr
config: i386-randconfig-062-20231003 (https://download.01.org/0day-ci/archive/20231004/202310040309.rX4s31l7-lkp@intel.com/config)
compiler: gcc-12 (Debian 12.2.0-14) 12.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231004/202310040309.rX4s31l7-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202310040309.rX4s31l7-lkp@intel.com/

sparse warnings: (new ones prefixed by >>)
   drivers/staging/iio/resolver/ad2s1210.c:901:1: sparse: sparse: symbol 'iio_const_attr_in_phase0_mag_value_available' was not declared. Should it be static?
   drivers/staging/iio/resolver/ad2s1210.c:906:1: sparse: sparse: symbol 'iio_const_attr_in_altvoltage0_thresh_falling_value_available' was not declared. Should it be static?
   drivers/staging/iio/resolver/ad2s1210.c:907:1: sparse: sparse: symbol 'iio_const_attr_in_altvoltage0_thresh_rising_value_available' was not declared. Should it be static?
>> drivers/staging/iio/resolver/ad2s1210.c:908:1: sparse: sparse: symbol 'iio_const_attr_in_altvoltage0_mag_value_available' was not declared. Should it be static?
   drivers/staging/iio/resolver/ad2s1210.c:909:1: sparse: sparse: symbol 'iio_dev_attr_in_angl1_thresh_rising_value_available' was not declared. Should it be static?
   drivers/staging/iio/resolver/ad2s1210.c:910:1: sparse: sparse: symbol 'iio_dev_attr_in_angl1_thresh_rising_hysteresis_available' was not declared. Should it be static?
diff mbox series

Patch

diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c
index 66def9f1dd1b..aa14edbe8a77 100644
--- a/drivers/staging/iio/resolver/ad2s1210.c
+++ b/drivers/staging/iio/resolver/ad2s1210.c
@@ -743,9 +743,6 @@  static int ad2s1210_write_raw(struct iio_dev *indio_dev,
 static IIO_DEVICE_ATTR(fault, 0644,
 		       ad2s1210_show_fault, ad2s1210_clear_fault, 0);
 
-static IIO_DEVICE_ATTR(dos_mis_thrd, 0644,
-		       ad2s1210_show_reg, ad2s1210_store_reg,
-		       AD2S1210_REG_DOS_MIS_THRD);
 static IIO_DEVICE_ATTR(dos_rst_max_thrd, 0644,
 		       ad2s1210_show_reg, ad2s1210_store_reg,
 		       AD2S1210_REG_DOS_RST_MAX_THRD);
@@ -791,6 +788,12 @@  static const struct iio_event_spec ad2s1210_monitor_signal_event_spec[] = {
 		/* Degredation of signal overrange threshold. */
 		.mask_separate = BIT(IIO_EV_INFO_VALUE),
 	},
+	{
+		/* Sine/cosine DOS mismatch fault.*/
+		.type = IIO_EV_TYPE_MAG,
+		.dir = IIO_EV_DIR_NONE,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+	},
 };
 
 static const struct iio_chan_spec ad2s1210_channels[] = {
@@ -864,7 +867,6 @@  static const struct iio_chan_spec ad2s1210_channels[] = {
 
 static struct attribute *ad2s1210_attributes[] = {
 	&iio_dev_attr_fault.dev_attr.attr,
-	&iio_dev_attr_dos_mis_thrd.dev_attr.attr,
 	&iio_dev_attr_dos_rst_max_thrd.dev_attr.attr,
 	&iio_dev_attr_dos_rst_min_thrd.dev_attr.attr,
 	NULL,
@@ -903,6 +905,7 @@  IIO_CONST_ATTR(in_phase0_mag_value_available,
 	       __stringify(PHASE_360_DEG_TO_RAD_MICRO));
 IIO_CONST_ATTR(in_altvoltage0_thresh_falling_value_available, THRESHOLD_RANGE_STR);
 IIO_CONST_ATTR(in_altvoltage0_thresh_rising_value_available, THRESHOLD_RANGE_STR);
+IIO_CONST_ATTR(in_altvoltage0_mag_value_available, THRESHOLD_RANGE_STR);
 IIO_DEVICE_ATTR_RO(in_angl1_thresh_rising_value_available, 0);
 IIO_DEVICE_ATTR_RO(in_angl1_thresh_rising_hysteresis_available, 0);
 
@@ -910,6 +913,7 @@  static struct attribute *ad2s1210_event_attributes[] = {
 	&iio_const_attr_in_phase0_mag_value_available.dev_attr.attr,
 	&iio_const_attr_in_altvoltage0_thresh_falling_value_available.dev_attr.attr,
 	&iio_const_attr_in_altvoltage0_thresh_rising_value_available.dev_attr.attr,
+	&iio_const_attr_in_altvoltage0_mag_value_available.dev_attr.attr,
 	&iio_dev_attr_in_angl1_thresh_rising_value_available.dev_attr.attr,
 	&iio_dev_attr_in_angl1_thresh_rising_hysteresis_available.dev_attr.attr,
 	NULL,
@@ -971,6 +975,9 @@  static int ad2s1210_read_event_value(struct iio_dev *indio_dev,
 		if (type == IIO_EV_TYPE_THRESH && dir == IIO_EV_DIR_RISING)
 			return ad2s1210_get_voltage_threshold(st,
 						AD2S1210_REG_DOS_OVR_THRD, val);
+		if (type == IIO_EV_TYPE_MAG)
+			return ad2s1210_get_voltage_threshold(st,
+						AD2S1210_REG_DOS_MIS_THRD, val);
 		return -EINVAL;
 	case IIO_PHASE:
 		return ad2s1210_get_phase_lock_range(st, val, val2);
@@ -1007,6 +1014,9 @@  static int ad2s1210_write_event_value(struct iio_dev *indio_dev,
 		if (type == IIO_EV_TYPE_THRESH && dir == IIO_EV_DIR_RISING)
 			return ad2s1210_set_voltage_threshold(st,
 						AD2S1210_REG_DOS_OVR_THRD, val);
+		if (type == IIO_EV_TYPE_MAG)
+			return ad2s1210_set_voltage_threshold(st,
+						AD2S1210_REG_DOS_MIS_THRD, val);
 		return -EINVAL;
 	case IIO_PHASE:
 		return ad2s1210_set_phase_lock_range(st, val, val2);