Show patches with: State = Action Required       |    Archived = No       |   719 patches
« 1 2 3 4 … 7 8 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[-next] Input: melfas_mip4 - remove set but not used variables [-next] Input: melfas_mip4 - remove set but not used variables - - - 0 0 0 2019-07-26 YueHaibing New
[(resend)] Input: uinput - Set name/phys to NULL before kfree(). [(resend)] Input: uinput - Set name/phys to NULL before kfree(). - - - 0 0 0 2019-02-08 Tetsuo Handa New
[01/10] dt-bindings: input: touchscreen: stmpe: add touch window configuration input: touchscreen: stmpe: ext. features - - - 0 0 0 2019-05-27 Middelschulte, Leif New
[01/10] Input: goodix - Refactor IRQ pin GPIO accesses [01/10] Input: goodix - Refactor IRQ pin GPIO accesses - - - 0 0 0 2020-01-01 Hans de Goede New
[02/10] Input: goodix - Make loading the config from disk independent from the GPIO setup [01/10] Input: goodix - Refactor IRQ pin GPIO accesses - - - 0 0 0 2020-01-01 Hans de Goede New
[02/10] Input: stmpe-ts - implement touch window configuration support input: touchscreen: stmpe: ext. features - - - 0 0 0 2019-05-27 Middelschulte, Leif New
[02/12] Documentation/arm: repointer docs to Documentation/arch/arm Untitled series #145049 1 - - 0 0 0 2019-07-12 Alex Shi New
[03/10] dt-bindings: input: touchscreen: stmpe: add resolution support input: touchscreen: stmpe: ext. features - - - 0 0 0 2019-05-27 Middelschulte, Leif New
[03/10] Input: goodix - Make resetting the controller at probe independent from the GPIO setup [01/10] Input: goodix - Refactor IRQ pin GPIO accesses - - - 0 0 0 2020-01-01 Hans de Goede New
[04/10] Input: goodix - Add support for getting IRQ + reset GPIOs on Cherry Trail devices [01/10] Input: goodix - Refactor IRQ pin GPIO accesses - - - 0 0 0 2020-01-01 Hans de Goede New
[04/10] Input: stmpe-ts - implement resolution support input: touchscreen: stmpe: ext. features - - - 0 0 0 2019-05-27 Middelschulte, Leif New
[05/10] dt-bindings: input: touchscreen: stmpe: add XY mode input: touchscreen: stmpe: ext. features - 1 - 0 0 0 2019-05-27 Middelschulte, Leif New
[05/10] Input: goodix - Add support for getting IRQ + reset GPIOs on Bay Trail devices [01/10] Input: goodix - Refactor IRQ pin GPIO accesses - - - 0 0 0 2020-01-01 Hans de Goede New
[05/46] ARM: pxa: split up mach/hardware.h ARM: pxa: towards multiplatform support 5 - - 0 0 0 2019-10-18 Arnd Bergmann New
[06/10] Input: goodix - Add support for controlling the IRQ pin through ACPI methods [01/10] Input: goodix - Refactor IRQ pin GPIO accesses - - - 0 0 0 2020-01-01 Hans de Goede New
[06/10] Input: stmpe-ts - implement XY acquisition mode input: touchscreen: stmpe: ext. features - - - 0 0 0 2019-05-27 Middelschulte, Leif New
[06/10] mfd / platform: cros_ec: Reorganize platform and mfd includes Untitled series #127107 8 - - 0 0 0 2019-06-04 Enric Balletbo i Serra New
[07/10] dt-bindings: input: touchscreen: stmpe: add axes inversion and swap input: touchscreen: stmpe: ext. features - - - 0 0 0 2019-05-27 Middelschulte, Leif New
[07/10] Input: goodix - Move defines to above struct goodix_ts_data declaration [01/10] Input: goodix - Refactor IRQ pin GPIO accesses - - - 0 0 0 2020-01-01 Hans de Goede New
[07/14] Input: cyapa - Replace devm_add_action() followed by failure action with devm_add_action_... Untitled series #143205 - - - 0 0 0 2019-07-08 Fuqian Huang Under Review
[07/33] Input: sh_keysc - Drop unnecessary error messages and other changes - - - 0 0 0 2017-01-18 Guenter Roeck Under Review
[08/10] Input: goodix - Save a copy of the config from goodix_read_config() [01/10] Input: goodix - Refactor IRQ pin GPIO accesses - - - 0 0 0 2020-01-01 Hans de Goede New
[08/10] Input: stmpe-ts - axes inversion and swapping input: touchscreen: stmpe: ext. features - - - 0 0 0 2019-05-27 Middelschulte, Leif New
[08/45] drivers: input: remove duplicate includes 1 - - 0 0 0 2017-12-05 Pravin Shedge Under Review
[09/10] dt-bindings: input: touchscreen: stmpe: add tracking index input: touchscreen: stmpe: ext. features - - - 0 0 0 2019-05-27 Middelschulte, Leif New
[09/10] Input: goodix - Make goodix_send_cfg() take a raw buffer as argument [01/10] Input: goodix - Refactor IRQ pin GPIO accesses - - - 0 0 0 2020-01-01 Hans de Goede New
[09/10] Input: sirfsoc-onkey: Handle return value of platform_get_irq - - - 0 0 0 2017-11-17 Arvind Yadav Under Review
[09/17] hid: google-hammer: Use cros_ec_send_cmd_msg() platform/chrome: Replace cros_ec_cmd_xfer_status - - - 0 0 0 2020-01-30 Prashant Malani jikos New
[1/1] HID: hiddev: remove a duplicated check [1/1] HID: hiddev: remove a duplicated check - - - 0 0 0 2019-12-24 Leizhen (ThunderTown) jikos New
[1/1] Input: edt-ft5x06 - disable irq handling during suspend [1/1] Input: edt-ft5x06 - disable irq handling during suspend - - - 0 0 0 2019-06-21 Benoit Parrot New
[1/1] Input: ims-pcu - fix typo in an error log - - - 0 0 0 2017-11-24 Leizhen (ThunderTown) Under Review
[1/1] Input: joydev - blacklist ds3/ds4/udraw motion sensors - - - 0 0 0 2017-10-06 Roderick Colenbrander Under Review
[1/1] input: mouse: convert to i2c_new_scanned_device input: replace i2c_new_probed_device with an ERR_PTR variant - - - 0 0 0 2019-12-16 Wolfram Sang New
[1/1] input/mouse: elan_i2c_core: Add ELAN061E ID [1/1] input/mouse: elan_i2c_core: Add ELAN061E ID - - - 0 0 0 2018-11-18 Harsh Shandilya Under Review
[1/2,v3] input: keyboard: DT bindings for the D-Link DIR-685 touchkeys 1 - - 0 0 0 2017-05-30 Linus Walleij Under Review
[1/2,v6] iio: light: Add DT bindings for GP2AP002 [1/2,v6] iio: light: Add DT bindings for GP2AP002 - 1 - 0 0 0 2020-01-26 Linus Walleij New
[1/2] Documentation: sample averaging for imx6ul_tsc - 1 - 0 0 0 2016-11-27 Guy Shapiro Under Review
[1/2] drivers: base: swnode: link devices to software nodes Make gpiolib work with static device properties 1 1 - 0 0 0 2019-07-13 Dmitry Torokhov New
[1/2] dt-bindings: input: mtk-pmic-keys: add MT6392 binding definition [1/2] dt-bindings: input: mtk-pmic-keys: add MT6392 binding definition - 1 - 0 0 0 2019-05-13 Fabien Parent Under Review
[1/2] dt-bindings: touchscreen: Add touchscreen schema Convert Goodix touchscreen to json-schema - - - 0 0 0 2020-01-07 Benjamin Gaignard New
[1/2] HID: i2c-hid: allow delay after SET_POWER HID: i2c-hid: add 60ms SET_POWER delay for Goodix touchpad - - - 0 0 0 2019-09-25 You-Sheng Yang New
[1/2] HID: wiimote: make handlers[] const HID: wiimote: Minor change to spinlock usage - - - 0 0 0 2019-06-26 Ian Abbott jikos New
[1/2] Input: add `SW_MACHINE_COVER` Add SW_MACHINE_COVER key - 1 - 0 0 0 2020-02-15 Merlijn Wajer New
[1/2] Input: atmel_mxt_ts - add wakeup support [1/2] Input: atmel_mxt_ts - add wakeup support - - - 0 0 0 2019-05-17 Stefano Manni New
[1/2] input: clps711x-keypad: Switch to use syscon_regmap_lookup_by_phandle() [1/2] input: clps711x-keypad: Switch to use syscon_regmap_lookup_by_phandle() - - - 0 0 0 2018-12-22 Alexander Shiyan Under Review
[1/2] input: edt-ft5x06 - add polled input support [1/2] input: edt-ft5x06 - add polled input support - - - 0 0 0 2019-04-30 Nicolas Saenz Julienne New
[1/2] input: egalax_ts: switch to i2c interface before wake up [1/2] input: egalax_ts: switch to i2c interface before wake up - - - 0 0 0 2020-02-11 BOUGH CHEN New
[1/2] Input: ili210x - Add DT binding for the Ilitek ILI2117 touch controller [1/2] Input: ili210x - Add DT binding for the Ilitek ILI2117 touch controller - 1 1 0 0 0 2019-03-02 Marek Vasut Under Review
[1/2] input: keyboard: gpio_keys_polled: use gpio lookup table [1/2] input: keyboard: gpio_keys_polled: use gpio lookup table - - - 0 0 0 2019-07-29 Enrico Weigelt, metux IT consult New
[1/2] input: keyboard: gpio-keys-polled: use input name from pdata if available [1/2] input: keyboard: gpio-keys-polled: use input name from pdata if available - - - 0 0 0 2019-02-14 Enrico Weigelt, metux IT consult New
[1/2] input: keyboard: imx: no need to control interrupt status in event check [1/2] input: keyboard: imx: no need to control interrupt status in event check - - - 0 0 0 2019-03-29 Anson Huang New
[1/2] Input: soc_button_array: Get rid of MAX_NBUTTONS - - - 0 0 0 2017-02-14 Hans de Goede Under Review
[1/2] Input: synaptics-rmi4 - clear irqs before set irqs [1/2] Input: synaptics-rmi4 - clear irqs before set irqs - - - 0 0 0 2019-02-20 Aaron Ma New
[1/2] input: touchscreen: ads7846.c: Add support for invert_x/y in dt [1/2] input: touchscreen: ads7846.c: Add support for invert_x/y in dt - - - 0 0 0 2019-03-12 David Jander New
[1/2] Input: wm97xx - switch to using threaded IRQ [1/2] Input: wm97xx - switch to using threaded IRQ - - - 0 0 0 2019-10-18 Dmitry Torokhov New
[1/3] ARM: dts: imx7s: add snvs clock to pwrkey [1/3] ARM: dts: imx7s: add snvs clock to pwrkey 1 1 - 0 0 0 2020-01-30 André Draszik New
[1/3] drivers: hid: fix G940 axis/button mappings [1/3] drivers: hid: fix G940 axis/button mappings - - - 0 0 0 2019-03-11 Chris Boyle jikos New
[1/3] dt-bindings: input: Add DT bindings for Whiskers switch [1/3] dt-bindings: input: Add DT bindings for Whiskers switch - - - 0 0 0 2019-10-05 Ikjoon Jang New
[1/3] dt-bindings: input: sitronix-st1232: add compatible string for ST1633 [1/3] dt-bindings: input: sitronix-st1232: add compatible string for ST1633 - 1 - 0 0 0 2019-01-28 Martin Kepplinger Under Review
[1/3] dt-bindings: input: touchscreen: add compatible string for Goodix GT917S Add support for Goodix GT917S touch controller 1 - - 0 0 0 2020-01-10 Icenowy Zheng New
[1/3] dt-bindings: vendor-prefixes: Add Coreriver vendor prefix [1/3] dt-bindings: vendor-prefixes: Add Coreriver vendor prefix 1 - - 0 0 0 2020-01-21 Nick Reitemeyer Under Review
[1/3] Input: apanel: avoid panic if ioreamp fails [1/3] Input: apanel: avoid panic if ioreamp fails - - - 0 0 0 2019-05-10 Kefeng Wang New
[1/3] Input: axp20x-pek - Remove unique wakeup event handling [1/3] Input: axp20x-pek - Remove unique wakeup event handling - - - 0 0 0 2020-01-13 Samuel Holland New
[1/3] Input: elan_i2c - Correct the value of ic_type for old and new pattern of firmware [1/3] Input: elan_i2c - Correct the value of ic_type for old and new pattern of firmware - - - 0 0 0 2020-01-14 Dave Wang New
[1/3] Input: elan_i2c - Do no operation for elan_smbus_set_mode function [1/3] Input: elan_i2c - Do no operation for elan_smbus_set_mode function - - - 0 0 0 2019-12-09 Dave Wang New
[1/3] input: gpio_keys: Add support for GPIO descriptors - - - 0 0 0 2016-02-19 Geert Uytterhoeven Under Review
[1/3] Input: hil_mlc: convert timeval to time64_t - - - 0 0 0 2017-11-27 Arnd Bergmann Under Review
[1/3] Input: synaptics-rmi4 - fix video buffer size [1/3] Input: synaptics-rmi4 - fix video buffer size - - - 0 0 0 2019-07-26 Lucas Stach New
[1/4] hid-multitouch: support for PixCir-based panels - - - 0 0 0 2010-10-13 Stephane Chatty Under Review
[1/4] Input: ads7846 - convert to devm_ alloc functions [1/4] Input: ads7846 - convert to devm_ alloc functions - - - 0 0 0 2019-03-27 Marco Felsch New
[1/4] Input: exc3000: split MT event handling from IRQ handler [1/4] Input: exc3000: split MT event handling from IRQ handler - - 1 0 0 0 2020-01-07 Lucas Stach New
[1/4] input:touchscreen:ad7879-spi.c: Fix regmap flag_masks - - - 0 0 0 2017-02-22 Hennerich, Michael Under Review
[1/4] mod_devicetable: helper macro for declaring oftree module device table [1/4] mod_devicetable: helper macro for declaring oftree module device table - - - 0 0 0 2019-04-16 Enrico Weigelt, metux IT consult New
[1/5] Input: fsl-imx25-tcq: Use devm_platform_ioremap_resource() Input: Use devm_platform_ioremap_resource() - - - 0 0 0 2019-04-04 Mukesh Ojha New
[1/5] Input: xpad - use a packet array to start Xbox One pads - - - 0 0 0 2017-02-05 Cameron Gutman Under Review
[1/5] of/device: Add of_ functions for device_link_{add,remove} Add of_ functions for device_link_add() - - - 0 0 0 2019-04-24 Benjamin Gaignard New
[1/6] cap11xx: set device driver_data [1/6] cap11xx: set device driver_data - - - 0 0 0 2019-12-29 Kurt Van Dijck New
[1/6] Input: elantech - Add the pattern for firmware into elantech_device_info structure [1/6] Input: elantech - Add the pattern for firmware into elantech_device_info structure - - - 0 0 0 2019-12-06 Dave Wang New
[1/6] MIPS: SGI-IP27: remove ioc3 ethernet init Use MFD framework for SGI IOC3 drivers - - - 0 0 0 2019-04-08 Thomas Bogendoerfer New
[1/7] clk: qcom: add support for setting the duty cycle qcom: add clk-vibrator driver - - - 0 0 0 2019-12-05 Brian Masney New
[1/7] Input: Add event-codes for macro keys found on various keyboards Input + HID: Add support for extra keys and LEDs on Logitech "G" series keyboards - - - 0 0 0 2019-05-20 Hans de Goede New
[1/8] Input: atmel_mxt_ts - eanble calibration via sysfs [1/8] Input: atmel_mxt_ts - eanble calibration via sysfs - - - 0 0 0 2019-08-28 Jongpil Jung New
[10/10] Input: goodix - Restore config on resume if necessary [01/10] Input: goodix - Refactor IRQ pin GPIO accesses - - - 0 0 0 2020-01-01 Hans de Goede New
[10/10] Input: palmas-pwrbutton: Handle return value of platform_get_irq - - - 0 0 0 2017-11-17 Arvind Yadav Under Review
[10/10] Input: stmpe-ts - implement tracking index input: touchscreen: stmpe: ext. features - - - 0 0 0 2019-05-27 Middelschulte, Leif New
[11/11] input: axp20x-pek: convert platform driver to use dev_groups Platform drivers, provide a way to add sysfs groups easily - - - 0 0 0 2019-07-04 Greg Kroah-Hartman New
[11/13] HID: picoLCD: constify fb ops Untitled series #209051 - - - 0 0 0 2019-11-27 Jani Nikula jikos New
[11/38] Annotate hardware config module parameters in drivers/input/ 1 - - 0 0 0 2017-04-05 David Howells Under Review
[13/14] docs: remove extra conf.py files pending doc patches for 5.3-rc - - - 0 0 0 2019-07-16 Mauro Carvalho Chehab New
[15/36] ARM: s3c: adc: move header to linux/soc/samsung ARM: samsung platform cleanup 3 - - 0 0 0 2019-10-10 Arnd Bergmann New
[2/2,v6] iio: light: Add a driver for Sharp GP2AP002x00F [1/2,v6] iio: light: Add DT bindings for GP2AP002 - - 1 0 0 0 2020-01-26 Linus Walleij New
[2/2] *: convert stream-like files -> stream_open, even if they use noop_llseek Untitled series #136705 - - - 0 0 0 2019-06-23 Kirill Smelkov New
[2/2] ARM: dts: n900: remove mmc1 card detect gpio Add SW_MACHINE_COVER key - 1 - 0 0 0 2020-02-15 Merlijn Wajer New
[2/2] devicetree: add vendor prefix for Zeitec 1 - - 0 0 0 2016-12-23 Jelle van der Waa Under Review
[2/2] Documentation: devices.txt: remove the mk712 touchscreen device from the list 1 - - 0 0 0 2018-04-02 Martin Kepplinger Under Review
[2/2] dt-bindings: Add I2C attached EETI EXC3000 bindings 1 - - 0 0 0 2017-10-06 Ahmet Inan Under Review
[2/2] dt-bindings: input: Add wakeup-source for atmel,maxtouch [1/2] Input: atmel_mxt_ts - add wakeup support - 1 - 0 0 0 2019-05-17 Stefano Manni New
[2/2] dt-bindings: touchscreen: Convert Goodix touchscreen to json-schema Convert Goodix touchscreen to json-schema - - - 0 0 0 2020-01-07 Benjamin Gaignard New
[2/2] gpiolib: add support for fetching descriptors from static properties Make gpiolib work with static device properties - - - 0 0 0 2019-07-13 Dmitry Torokhov New
[2/2] HID: i2c-hid: add 60ms SET_POWER delay for Goodix touchpad HID: i2c-hid: add 60ms SET_POWER delay for Goodix touchpad - - - 0 0 0 2019-09-25 You-Sheng Yang jikos New
« 1 2 3 4 … 7 8 »