Series |
CCS driver
|
expand
-
[v2,000/106] CCS driver
-
[v2,001/106] smiapp: Generate CCS register definitions and limits
-
[v2,002/106] smiapp: Use CCS register flags
-
[v2,003/106] smiapp: Calculate CCS limit offsets and limit buffer size
-
[v2,004/106] smiapp: Remove macros for defining registers, merge definitions
-
[v2,005/106] smiapp: Add macros for accessing CCS registers
-
[v2,006/106] smiapp: Use MIPI CCS version and manufacturer ID information
-
[v2,007/106] smiapp: Read CCS limit values
-
[v2,008/106] smiapp: Switch to CCS limits
-
[v2,009/106] smiapp: Obtain frame descriptor from CCS limits
-
[v2,010/106] smiapp: Use CCS limits in reading data format descriptors
-
[v2,011/106] smiapp: Use CCS limits in reading binning capabilities
-
[v2,012/106] smiapp: Use CCS registers
-
[v2,013/106] smiapp: Remove quirk function for writing a single 8-bit register
-
[v2,014/106] smiapp: Rename register access functions
-
[v2,015/106] smiapp: Internal rename to CCS
-
[v2,016/106] smiapp: Differentiate CCS sensors from SMIA in subdev naming
-
[v2,017/106] smiapp: Rename as "ccs"
-
[v2,018/106] ccs: Remove profile concept
-
[v2,019/106] ccs: Give all subdevs a function
-
[v2,027/106] ccs: Request for "reset" GPIO
-
[v2,028/106] ccs: Add MIPI CCS compatible strings
-
[v2,029/106] ccs: Remove the I²C ID table
-
[v2,030/106] ccs: Remove remaining support for platform data
-
[v2,031/106] ccs: Make hwcfg part of the device specific struct
-
[v2,032/106] ccs: Fix obtaining bus information from firmware
-
[v2,033/106] ccs: Add CCS static data parser library
-
[v2,034/106] ccs: Combine revision number major and minor into one
-
[v2,035/106] ccs: Read CCS static data from firmware binaries
-
[v2,036/106] ccs: Stop reading arrays after the first zero
-
[v2,037/106] ccs: The functions to get compose or crop rectangle never return NULL
-
[v2,038/106] ccs: Replace somewhat harsh internal checks based on BUG with WARN_ON
-
[v2,039/106] ccs: Refactor register reading a little
-
[v2,040/106] ccs: Make real to integer number conversion optional
-
[v2,041/106] ccs: Move limit value real to integer conversion from read to access time
-
[v2,042/106] ccs: Read ireal numbers correctly
-
[v2,043/106] smiapp-pll: Rename as ccs-pll
-
[v2,020/106] dt-bindings: nokia,smia: Fix link-frequencies documentation
-
[v2,044/106] ccs-pll: Fix MODULE_LICENSE
-
[v2,021/106] dt-bindings: nokia,smia: Make vana-supply optional
-
[v2,045/106] ccs: Change my e-mail address
-
[v2,022/106] dt-bindings: nokia,smia: Remove nokia,nvm-size property
-
[v2,046/106] ccs: Add support for manufacturer regs from sensor and module files
-
[v2,023/106] dt-bindings: nokia,smia: Convert to YAML
-
[v2,047/106] ccs: Use static data read-only registers
-
[v2,024/106] dt-bindings: nokia,smia: Use better active polarity for reset
-
[v2,048/106] ccs: Clean up runtime PM usage
-
[v2,025/106] dt-bindings: nokia,smia: Amend SMIA bindings with MIPI CCS support
-
[v2,049/106] ccs: Wrap long lines, unwrap short ones
-
[v2,026/106] dt-bindings: mipi-ccs: Add bus-type for C-PHY support
-
[v2,050/106] ccs: Add device compatible identifiers for telling SMIA and CCS apart
-
[v2,051/106] ccs: Use longer pre-I²C sleep for CCS compliant devices
-
[v2,053/106] dt-bindings: mipi,ccs: Don't mention vana voltage
-
[v2,052/106] ccs: Remove unnecessary delays from power-up sequence
-
[v2,054/106] dt-bindings: mipi,ccs: Add vcore and vio supplies
-
[v2,055/106] ccs: Use all regulators
-
[v2,056/106] ccs-pll: Don't use div_u64 to divide a 32-bit number
-
[v2,057/106] ccs-pll: Split limits and PLL configuration into front and back parts
-
[v2,058/106] ccs-pll: Use correct VT divisor for calculating VT SYS divisor
-
[v2,059/106] ccs-pll: End search if there are no better values available
-
[v2,060/106] ccs-pll: Remove parallel bus support
-
[v2,061/106] ccs-pll: Differentiate between CSI-2 D-PHY and C-PHY
-
[v2,062/106] ccs-pll: Move the flags field down, away from 8-bit fields
-
[v2,063/106] ccs-pll: Document the structs in the header as well as the function
-
[v2,064/106] ccs-pll: Use the BIT macro
-
[v2,065/106] ccs-pll: Begin calculation from OP system clock frequency
-
[v2,066/106] ccs-pll: Fix condition for pre-PLL divider lower bound
-
[v2,067/106] ccs-pll: Avoid overflow in pre-PLL divisor lower bound search
-
[v2,068/106] ccs-pll: Fix comment on check against maximum PLL multiplier
-
[v2,069/106] ccs-pll: Fix check for PLL multiplier upper bound
-
[v2,070/106] ccs-pll: Use explicit 32-bit unsigned type
-
[v2,071/106] ccs-pll: Add support for lane speed model
-
[v2,072/106] ccs: Add support for lane speed model
-
[v2,073/106] ccs-pll: Add support for decoupled OP domain calculation
-
[v2,074/106] ccs-pll: Add support for extended input PLL clock divider
-
[v2,075/106] ccs-pll: Support two cycles per pixel on OP domain
-
[v2,076/106] ccs-pll: Add support flexible OP PLL pixel clock divider
-
[v2,077/106] ccs-pll: Add sanity checks
-
[v2,078/106] ccs-pll: Add C-PHY support
-
[v2,079/106] ccs-pll: Split off VT subtree calculation
-
[v2,080/106] ccs-pll: Check for derating and overrating, support non-derating sensors
-
[v2,081/106] ccs-pll: Better separate OP and VT sub-tree calculation
-
[v2,082/106] ccs-pll: Print relevant information on PLL tree
-
[v2,083/106] ccs-pll: Rework bounds checks
-
[v2,084/106] ccs-pll: Make VT divisors 16-bit
-
[v2,085/106] ccs-pll: Fix VT post-PLL divisor calculation
-
[v2,086/106] ccs-pll: Separate VT divisor limit calculation from the rest
-
[v2,087/106] ccs-pll: Add trivial dual PLL support
-
[v2,088/106] ccs: Dual PLL support
-
[v2,089/106] ccs-pll: Add support for DDR OP system and pixel clocks
-
[v2,090/106] ccs: Add support for DDR OP SYS and OP PIX clocks
-
[v2,091/106] ccs: Print written register values
-
[v2,092/106] ccs-pll: Print pixel rates
-
[v2,093/106] ccs: Add support for obtaining C-PHY configuration from firmware
-
[v2,094/106] ccs: Add digital gain support
-
[v2,095/106] ccs: Add support for old-style SMIA digital gain
-
[v2,096/106] ccs: Remove analogue gain field
-
[v2,097/106] ccs: Only add analogue gain control if the device supports it
-
[v2,098/106] v4l: uapi: Add user control base for CCS controls
-
[v2,099/106] v4l: uapi: ccs: Add controls for analogue gain constants
-
[v2,100/106] ccs: Add support for analogue gain coefficient controls
-
[v2,101/106] v4l: uapi: ccs: Add controls for CCS alternative analogue gain
-
[v2,102/106] ccs: Add support for alternate analogue global gain
-
[v2,103/106] ccs: Add debug prints for MSR registers
-
[v2,104/106] v4l: uapi: ccs: Add CCS controls for shading correction
-
[v2,105/106] ccs: Add shading correction and luminance correction level controls
-
[v2,106/106] ccs: Add CCS ACPI device ID
|