Show patches with: Submitter = Jitao Shi       |   344 patches
« 1 2 3 4 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
drm/mediatek: DP HPD Detect with debounce drm/mediatek: DP HPD Detect with debounce - - - --- 2022-01-12 Jitao Shi New
[v3,2/2] drm/mediatek: control panel's power before MIPI LP11 seperate panel power control from panel prepare/unprepare - - - --- 2021-11-16 Jitao Shi New
[v3,1/2] drm/panel: panel-boe-tv101wum-nl6: tune the power sequence to avoid leakage seperate panel power control from panel prepare/unprepare - - - --- 2021-11-16 Jitao Shi New
[v7,3/3] drm/bridge: anx7625: config hs packets end aligned to avoid screen shift force hsa hbp hfp packets multiple of lanenum to avoid screen shift 1 1 - --- 2021-09-15 Jitao Shi New
[v7,2/3] drm/mediatek: implment the dsi hs packets aligned force hsa hbp hfp packets multiple of lanenum to avoid screen shift - 1 - --- 2021-09-15 Jitao Shi New
[v7,1/3] drm/dsi: transer dsi hs packet aligned force hsa hbp hfp packets multiple of lanenum to avoid screen shift - 1 - --- 2021-09-15 Jitao Shi New
[v6,1/1] drm/mediatek: force hsa hbp hfp packets multiple of lanenum to avoid screen shift force hsa hbp hfp packets multiple of lanenum to avoid screen shift - - - --- 2021-08-08 Jitao Shi New
[v7,5/5] pwm: mtk_disp: implement atomic API .get_state() fix the clks on/off mismatch issue and switch pwm-mtk-disp to atomic APIs - - - --- 2021-08-08 Jitao Shi New
[v7,4/5] pwm: mtk_disp: fix overflow in period and duty calcalation fix the clks on/off mismatch issue and switch pwm-mtk-disp to atomic APIs - - - --- 2021-08-08 Jitao Shi New
[v7,3/5] pwm: mtk_disp: implement atomic API .apply() fix the clks on/off mismatch issue and switch pwm-mtk-disp to atomic APIs - - - --- 2021-08-08 Jitao Shi New
[v7,2/5] pwm: mtk_disp: fix force reg to working reg. fix the clks on/off mismatch issue and switch pwm-mtk-disp to atomic APIs - - - --- 2021-08-08 Jitao Shi New
[v7,1/5] pwm: mtk-disp: adjust the clocks to avoid them mismatch fix the clks on/off mismatch issue and switch pwm-mtk-disp to atomic APIs - - - --- 2021-08-08 Jitao Shi New
[v2,3/3] drm/mediatek: fine tune the dsi panel's power sequence seperate panel power control from panel prepare/unprepare - - - --- 2021-08-08 Jitao Shi New
[v2,2/3] drm/panel: boe-tv101wum-n16 seperate the panel power control seperate panel power control from panel prepare/unprepare - - - --- 2021-08-08 Jitao Shi New
[v2,1/3] drm/panel: seperate panel power control from panel prepare/unprepare seperate panel power control from panel prepare/unprepare - - - --- 2021-08-08 Jitao Shi New
[v5,2/2] drm/mediatek: force hsa hbp hfp packets multiple of lanenum to avoid screen shift force hsa hbp hfp packets multiple of lanenum to avoid screen shift - - - --- 2021-08-02 Jitao Shi New
[v5,1/2] dt-bindings: drm/bridge: anx7625: add force_dsi_end_without_null force hsa hbp hfp packets multiple of lanenum to avoid screen shift - - - --- 2021-08-02 Jitao Shi New
[v4,2/2] dt-bindings: mediatek: add force_dsi_end_without_null [v4,1/2] drm/mediatek: force hsa hbp hfp packets multiple of lanenum to avoid screen shift - - - --- 2021-08-01 Jitao Shi New
[v4,1/2] drm/mediatek: force hsa hbp hfp packets multiple of lanenum to avoid screen shift [v4,1/2] drm/mediatek: force hsa hbp hfp packets multiple of lanenum to avoid screen shift - - - --- 2021-08-01 Jitao Shi New
[v3,2/2] dt-bindings: mediatek: add force_dsi_end_without_null for dsi [v3,1/2] drm/mediatek: force hsa hbp hfp packets multiple of lanenum to avoid screen shift - - - --- 2021-07-26 Jitao Shi New
[v3,1/2] drm/mediatek: force hsa hbp hfp packets multiple of lanenum to avoid screen shift [v3,1/2] drm/mediatek: force hsa hbp hfp packets multiple of lanenum to avoid screen shift - - - --- 2021-07-26 Jitao Shi New
[v6,5/5] pwm: mtk_disp: implement atomic API .get_state() fix the clks on/off mismatch issue and switch pwm-mtk-disp to atomic APIs - - - --- 2021-07-24 Jitao Shi New
[v6,4/5] pwm: mtk_disp: fix overflow in period and duty calcalation fix the clks on/off mismatch issue and switch pwm-mtk-disp to atomic APIs - - - --- 2021-07-24 Jitao Shi New
[v6,3/5] pwm: mtk_disp: implement atomic API .apply() fix the clks on/off mismatch issue and switch pwm-mtk-disp to atomic APIs - - - --- 2021-07-24 Jitao Shi New
[v6,2/5] pwm: mtk_disp: fix force reg to working reg. fix the clks on/off mismatch issue and switch pwm-mtk-disp to atomic APIs - - - --- 2021-07-24 Jitao Shi New
[v6,1/5] pwm: mtk-disp: adjust the clocks to avoid them mismatch fix the clks on/off mismatch issue and switch pwm-mtk-disp to atomic APIs - - - --- 2021-07-24 Jitao Shi New
[v2] drm/mediatek: force hsa hbp hfp packets multiple of lanenum to avoid screen shift [v2] drm/mediatek: force hsa hbp hfp packets multiple of lanenum to avoid screen shift - - - --- 2021-06-17 Jitao Shi New
[v5,3/3] pwm: mtk_disp: implement atomic API .get_state() fix the clks on/off mismatch issue and switch pwm-mtk-disp to atomic APIs - - - --- 2021-06-16 Jitao Shi New
[v5,2/3] pwm: mtk_disp: implement atomic API .apply() fix the clks on/off mismatch issue and switch pwm-mtk-disp to atomic APIs - - - --- 2021-06-16 Jitao Shi New
[v5,1/3] pwm: mtk-disp: adjust the clocks to avoid them mismatch fix the clks on/off mismatch issue and switch pwm-mtk-disp to atomic APIs - - - --- 2021-06-16 Jitao Shi New
[v4,3/3] pwm: mtk-disp: Switch to atomic API fix the clock on/off mismatch and switch pwm api to atomic API - - - --- 2021-06-03 Jitao Shi New
[v4,2/3] pwm: mtk-disp: move the commit to clock enabled fix the clock on/off mismatch and switch pwm api to atomic API - - - --- 2021-06-03 Jitao Shi New
[v4,1/3] pwm: mtk-disp: adjust the clocks to avoid them mismatch fix the clock on/off mismatch and switch pwm api to atomic API - - - --- 2021-06-03 Jitao Shi New
[v3,3/3] pwm: mtk_disp: implement atomic API .get_state() Convert the mtk_disp driver to aotmic API - - - --- 2021-05-26 Jitao Shi New
[v3,2/3] pwm: mtk_disp: implement atomic API .apply() Convert the mtk_disp driver to aotmic API - - - --- 2021-05-26 Jitao Shi New
[v3,1/3] pwm: mtk_disp: remove the clock operations for atomic APIs. Convert the mtk_disp driver to aotmic API - - - --- 2021-05-26 Jitao Shi New
[4/4] drm/mediatek: add dsi module reset driver [1/4] drm/panel: seperate panel power control from panel prepare/unprepare - - - --- 2021-04-20 Jitao Shi New
[3/4] drm/mediatek: fine tune the dsi panel's power sequence [1/4] drm/panel: seperate panel power control from panel prepare/unprepare - - - --- 2021-04-20 Jitao Shi New
[2/4] drm/panel: boe-tv101wum-n16 seperate the panel power control [1/4] drm/panel: seperate panel power control from panel prepare/unprepare - - - --- 2021-04-20 Jitao Shi New
[1/4] drm/panel: seperate panel power control from panel prepare/unprepare [1/4] drm/panel: seperate panel power control from panel prepare/unprepare - - - --- 2021-04-20 Jitao Shi New
drm/mediatek: force hsa hsa hfp packets multiple of line num to avoid screen shift drm/mediatek: force hsa hsa hfp packets multiple of line num to avoid screen shift - - - --- 2021-04-07 Jitao Shi New
[3/3] drm/mediatek: dpi: add bus format negociation mt8183 dpi supports dual edge - - - --- 2021-03-30 Jitao Shi New
[2/3] drm/mediatek: config mt8183 driver data to support dual edge sample mt8183 dpi supports dual edge - - - --- 2021-03-30 Jitao Shi New
[1/3] drm/mediatek: dpi dual edge sample mode support mt8183 dpi supports dual edge - - - --- 2021-03-30 Jitao Shi New
[v3,3/3] dt-bindings: mediatek,dpi: add mt8192 to mediatek,dpi Add check for max clock rate in mode_valid 1 1 - --- 2021-02-08 Jitao Shi New
[v3,2/3] drm/mediatek: mtk_dpi: Add dpi config for mt8192 Add check for max clock rate in mode_valid - - - --- 2021-02-08 Jitao Shi New
[v3,1/3] drm/mediatek: mtk_dpi: Add check for max clock rate in mode_valid Add check for max clock rate in mode_valid - 1 - --- 2021-02-08 Jitao Shi New
[v2,3/3] dt-bindings: mediatek,dpi: add mt8192 to mediatek,dpi Add check for max clock rate in mode_valid - - - --- 2021-02-08 Jitao Shi New
[v2,2/3] drm/mediatek: mtk_dpi: Add dpi config for mt8192 Add check for max clock rate in mode_valid - - - --- 2021-02-08 Jitao Shi New
[v2,1/3] drm/mediatek: mtk_dpi: Add check for max clock rate in mode_valid Add check for max clock rate in mode_valid - - - --- 2021-02-08 Jitao Shi New
[3/3] dt-bindings: mediatek,dpi: add mt8192 to mediatek,dpi Add check for max clock rate in mode_valid - - - --- 2021-02-07 Jitao Shi New
[2/3] drm/mediatek: mtk_dpi: Add dpi config for mt8192 Add check for max clock rate in mode_valid - - - --- 2021-02-07 Jitao Shi New
[1/3] drm/mediatek: mtk_dpi: Add check for max clock rate in mode_valid Add check for max clock rate in mode_valid - - - --- 2021-02-07 Jitao Shi New
drm/mediatek: fine tune the data lane trail by project dts drm/mediatek: fine tune the data lane trail by project dts - - - --- 2021-02-01 Jitao Shi New
[v2,2/2] drm/mediatek: dsi: fine tune the line time cause by EOTp Fix EoTp flag - - - --- 2021-02-01 Jitao Shi New
[v2,1/2] drm/mediatek: dsi: Fix EoTp flag Fix EoTp flag - - - --- 2021-02-01 Jitao Shi New
[v2,3/3] pwm: mtk_disp: implement .get_state() Convert the mtk_disp driver to aotmic API - - - --- 2021-01-30 Jitao Shi New
[v2,2/3] pwm: mtk_disp: convert the driver to atomic API Convert the mtk_disp driver to aotmic API - - - --- 2021-01-30 Jitao Shi New
[v2,1/3] pwm: mtk_disp: clear the clock operations Convert the mtk_disp driver to aotmic API - - - --- 2021-01-30 Jitao Shi New
drm/mediatek: dsi: Fix EoTp flag drm/mediatek: dsi: Fix EoTp flag - - - --- 2021-01-07 Jitao Shi New
drm/mediatek: dsi: Use IRQF_TRIGGER_NONE for dsi irq trigger type drm/mediatek: dsi: Use IRQF_TRIGGER_NONE for dsi irq trigger type - - - --- 2020-12-25 Jitao Shi New
[v5,1/1] drm/mediatek: dsi: fix scrolling of panel with small hfp or hbp fix scrolling of panel with small hfp or hbp - - - --- 2020-10-13 Jitao Shi New
[v4,2/2] drm/mediatek: dsi: fix scrolling of panel with small hfp or hbp fix scrolling of panel with small hfp or hbp - - - --- 2020-10-10 Jitao Shi New
[v4,1/2] Revert "drm/mediatek: dsi: Fix scrolling of panel with small hfp or hbp" fix scrolling of panel with small hfp or hbp - 1 1 --- 2020-10-10 Jitao Shi New
[v2] dt-bindings: display: mediatek: convert the dpi bindings to yaml [v2] dt-bindings: display: mediatek: convert the dpi bindings to yaml - 1 - --- 2020-09-17 Jitao Shi New
[v3] drm/mediatek: dsi: fix scrolling of panel with small hfp or hbp [v3] drm/mediatek: dsi: fix scrolling of panel with small hfp or hbp - - - --- 2020-09-17 Jitao Shi New
[v2] drm/mediatek: dsi: fix scrolling of panel with small hfp or hbp [v2] drm/mediatek: dsi: fix scrolling of panel with small hfp or hbp - 1 - --- 2020-08-17 Jitao Shi New
drm/panel: Fix auo, kd101n80-45na horizontal noise on edges of panel drm/panel: Fix auo, kd101n80-45na horizontal noise on edges of panel - - - --- 2020-07-14 Jitao Shi New
[v2] drm/panel: auo, b116xw03: fix flash backlight when power on [v2] drm/panel: auo, b116xw03: fix flash backlight when power on - - - --- 2020-07-05 Jitao Shi New
drm/panel: auo,b116xw03: fix flash backlight when power on drm/panel: auo,b116xw03: fix flash backlight when power on - - - --- 2020-07-03 Jitao Shi New
[v16,1/1] dt-bindings: display: mediatek: convert the dpi bindings to yaml [v16,1/1] dt-bindings: display: mediatek: convert the dpi bindings to yaml - - - --- 2020-06-14 Jitao Shi New
drm/mediatek: dsi: fix scrolling of panel with small hfp or hbp drm/mediatek: dsi: fix scrolling of panel with small hfp or hbp - - - --- 2020-05-22 Jitao Shi New
[v15,3/3] drm/mediatek: set dpi pin mode to gpio low to avoid leakage current mt8183 dpi support pin mode swap - 1 - --- 2020-04-15 Jitao Shi New
[v15,2/3] dt-bindings: display: mediatek: convert the document format from txt to yaml mt8183 dpi support pin mode swap - 1 - --- 2020-04-15 Jitao Shi New
[v15,1/3] dt-bindings: display: mediatek: control dpi pins mode to avoid leakage mt8183 dpi support pin mode swap 1 1 - --- 2020-04-15 Jitao Shi New
[v6,4/4] drm/mediatek: config mipitx impedance with calibration data Config mipi tx current and impedance - 1 - --- 2020-04-11 Jitao Shi New
[v6,3/4] drm/mediatek: add the mipitx driving control Config mipi tx current and impedance - 2 - --- 2020-04-11 Jitao Shi New
[v6,2/4] dt-bindings: display: mediatek: get mipitx calibration data from nvmem Config mipi tx current and impedance - 2 - --- 2020-04-11 Jitao Shi New
[v6,1/4] dt-bindings: display: mediatek: add property to control mipi tx drive current Config mipi tx current and impedance - 2 - --- 2020-04-11 Jitao Shi New
[v5,4/4] drm/mediatek: config mipitx impedance with calibration data Config mipi tx current and impedance - - - --- 2020-04-10 Jitao Shi New
[v5,3/4] drm/mediatek: add the mipitx driving control Config mipi tx current and impedance - 2 - --- 2020-04-10 Jitao Shi New
[v5,2/4] dt-bindings: display: mediatek: get mipitx calibration data from nvmem Config mipi tx current and impedance - 2 - --- 2020-04-10 Jitao Shi New
[v5,1/4] dt-bindings: display: mediatek: add property to control mipi tx drive current Config mipi tx current and impedance - 1 - --- 2020-04-10 Jitao Shi New
[1/1] pwm: mtk_disp: implement .apply() [1/1] pwm: mtk_disp: implement .apply() - - - --- 2020-04-10 Jitao Shi New
[v14,3/3] drm/mediatek: set dpi pin mode to gpio low to avoid leakage current mt8183 dpi support pin mode swap - 1 - --- 2020-04-03 Jitao Shi New
[v14,2/3] dt-bindings: display: mediatek: convert the document format from txt to yaml mt8183 dpi support pin mode swap - - - --- 2020-04-03 Jitao Shi New
[v14,1/3] dt-bindings: display: mediatek: control dpi pins mode to avoid leakage mt8183 dpi support pin mode swap 1 1 - --- 2020-04-03 Jitao Shi New
[v4,4/4] drm/mediatek: config mipitx impedance with calibration data Config mipi tx current and impedance - - - --- 2020-03-31 Jitao Shi New
[v4,3/4] drm/mediatek: add the mipitx driving control Config mipi tx current and impedance - 2 - --- 2020-03-31 Jitao Shi New
[v4,2/4] dt-bindings: display: mediatek: get mipitx calibration data from nvmem Config mipi tx current and impedance - 2 - --- 2020-03-31 Jitao Shi New
[v4,1/4] dt-bindings: display: mediatek: add property to control mipi tx drive current Config mipi tx current and impedance - 1 - --- 2020-03-31 Jitao Shi New
[v3,4/4] drm/mediatek: config mipitx impedance with calibration data Config mipi tx drive current and impedance - - - --- 2020-03-11 Jitao Shi New
[v3,3/4] drm/mediatek: add the mipitx driving control Config mipi tx drive current and impedance - 1 - --- 2020-03-11 Jitao Shi New
[v3,2/4] dt-bindings: display: mediatek: get mipitx calibration data from nvmem Config mipi tx drive current and impedance - 1 - --- 2020-03-11 Jitao Shi New
[v3,1/4] dt-bindings: display: mediatek: add property to control mipi tx drive current Config mipi tx drive current and impedance - - - --- 2020-03-11 Jitao Shi New
[v13,6/6] drm/mediatek: set dpi pin mode to gpio low to avoid leakage current mt8183 dpi supports dual edge and pin mode swap - - - --- 2020-03-11 Jitao Shi New
[v13,5/6] drm/mediatek: dpi sample mode support mt8183 dpi supports dual edge and pin mode swap - 1 - --- 2020-03-11 Jitao Shi New
[v13,4/6] dt-bindings: display: mediatek: convert the document format from txt to yaml mt8183 dpi supports dual edge and pin mode swap - - - --- 2020-03-11 Jitao Shi New
[v13,3/6] dt-bindings: display: mediatek: dpi sample data in dual edge support mt8183 dpi supports dual edge and pin mode swap 1 - - --- 2020-03-11 Jitao Shi New
[v13,2/6] dt-bindings: display: mediatek: control dpi pins mode to avoid leakage mt8183 dpi supports dual edge and pin mode swap - - - --- 2020-03-11 Jitao Shi New
« 1 2 3 4 »