diff mbox series

[net-next,4/4] staging: mt7621-dts: enable MT7530 interrupt controller

Message ID 20210429062130.29403-5-dqfext@gmail.com (mailing list archive)
State New, archived
Headers show
Series MT7530 interrupt support | expand

Commit Message

Qingfang Deng April 29, 2021, 6:21 a.m. UTC
Enable MT7530 interrupt controller in the MT7621 SoC.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
---
RFC v4 -> PATCH v1:
- No changes.

 drivers/staging/mt7621-dts/mt7621.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Andrew Lunn April 29, 2021, 9:30 p.m. UTC | #1
On Thu, Apr 29, 2021 at 02:21:30PM +0800, DENG Qingfang wrote:
> Enable MT7530 interrupt controller in the MT7621 SoC.
> 
> Signed-off-by: DENG Qingfang <dqfext@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
Florian Fainelli April 29, 2021, 11:31 p.m. UTC | #2
On 4/28/2021 11:21 PM, DENG Qingfang wrote:
> Enable MT7530 interrupt controller in the MT7621 SoC.
> 
> Signed-off-by: DENG Qingfang <dqfext@gmail.com>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Vladimir Oltean May 6, 2021, 11:48 a.m. UTC | #3
On Thu, Apr 29, 2021 at 02:21:30PM +0800, DENG Qingfang wrote:
> Enable MT7530 interrupt controller in the MT7621 SoC.
> 
> Signed-off-by: DENG Qingfang <dqfext@gmail.com>
> ---
> RFC v4 -> PATCH v1:
> - No changes.
> 
>  drivers/staging/mt7621-dts/mt7621.dtsi | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/staging/mt7621-dts/mt7621.dtsi b/drivers/staging/mt7621-dts/mt7621.dtsi
> index 16fc94f65486..0f7e487883a5 100644
> --- a/drivers/staging/mt7621-dts/mt7621.dtsi
> +++ b/drivers/staging/mt7621-dts/mt7621.dtsi
> @@ -447,6 +447,10 @@ switch0: switch0@0 {
>  				mediatek,mcm;
>  				resets = <&rstctrl 2>;
>  				reset-names = "mcm";
> +				interrupt-controller;
> +				#interrupt-cells = <1>;
> +				interrupt-parent = <&gic>;
> +				interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
>  
>  				ports {
>  					#address-cells = <1>;
> -- 
> 2.25.1
> 

I don't remember if I mentioned this before, but a short-hand way of
expressing this is using:

	interrupts-extended = <&gic GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;

but the entire drivers/staging/mt7621-dts/mt7621.dtsi file uses
interrupt-parent, so this is fine.

Also, I panicked for a second thinking that this is the ARM GIC which
supports the GIC_SHARED flag, but I see that mt7621 is MIPS.

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
diff mbox series

Patch

diff --git a/drivers/staging/mt7621-dts/mt7621.dtsi b/drivers/staging/mt7621-dts/mt7621.dtsi
index 16fc94f65486..0f7e487883a5 100644
--- a/drivers/staging/mt7621-dts/mt7621.dtsi
+++ b/drivers/staging/mt7621-dts/mt7621.dtsi
@@ -447,6 +447,10 @@  switch0: switch0@0 {
 				mediatek,mcm;
 				resets = <&rstctrl 2>;
 				reset-names = "mcm";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
 
 				ports {
 					#address-cells = <1>;