diff mbox

[v5] mmc: sdhci-s3c: Add device tree support

Message ID m3lig8kmzl.fsf@pullcord.laptop.org (mailing list archive)
State Accepted, archived
Headers show

Commit Message

Chris Ball Sept. 18, 2012, 3:50 a.m. UTC
Hi,

On Mon, Sep 17 2012, Thomas Abraham wrote:
> On 23 August 2012 22:40, Thomas Abraham <thomas.abraham@linaro.org> wrote:
>> Add device tree based discovery support for Samsung's sdhci controller
>>
>> Cc: Ben Dooks <ben-linux@fluff.org>
>> Cc: Kukjin Kim <kgene.kim@samsung.com>
>> Cc: Chris Ball <cjb@laptop.org>
>> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
>> ---
>> Changes since v4:
>> Adapted to new mmc core card detection bindings as specfied in the patch:
>> [PATCH] mmc: dt: Add card-detection properties to core binding
>> and extends it "samsung,cd-pinmux-gpio" property as suggested by
>> Mitch Bradley <wmb@firmworks.com>
>>
>> Changes since v3:
>>
>> The patch series that adds device tree support for Samsung sdhci controller
>> had six patches in total, of which, the first five patches have been accepted.
>> The sixth patch in the series was dropped since it was using custom Samsung
>> properties for descrbing the bus-width and card-detect gpio, but had otherwise
>> addressed all the comments.
>>
>> This patch reworks the sixth patch in v3 of the sdhci device tree support
>> patch series. The only change in this patch from the v3 version is the use of
>> generic mmc bindings for descrbing the bus-width and card-detect gpio.
>>
>>  .../devicetree/bindings/mmc/samsung-sdhci.txt      |   53 +++++++
>>  drivers/mmc/host/sdhci-s3c.c                       |  162 +++++++++++++++++++-
>>  2 files changed, 209 insertions(+), 6 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
>
> Hi Chris,
>
> This patch adds device tree support for sdhci-s3c driver. All the
> comments for this patch has been addressed. Can this be queued for
> v3.7?

Yes, sounds good.  Jaehoon, perhaps you could give your Reviewed-by
for me to add to the patch?  I've pushed this to mmc-next for 3.7
now, after adding Jaehoon's else-if suggestion that wasn't acted on:


Thanks,

- Chris.

Comments

Thomas Abraham Sept. 18, 2012, 3:56 a.m. UTC | #1
On 18 September 2012 09:20, Chris Ball <cjb@laptop.org> wrote:
> Hi,
>
> On Mon, Sep 17 2012, Thomas Abraham wrote:
>> On 23 August 2012 22:40, Thomas Abraham <thomas.abraham@linaro.org> wrote:
>>> Add device tree based discovery support for Samsung's sdhci controller
>>>
>>> Cc: Ben Dooks <ben-linux@fluff.org>
>>> Cc: Kukjin Kim <kgene.kim@samsung.com>
>>> Cc: Chris Ball <cjb@laptop.org>
>>> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
>>> ---
>>> Changes since v4:
>>> Adapted to new mmc core card detection bindings as specfied in the patch:
>>> [PATCH] mmc: dt: Add card-detection properties to core binding
>>> and extends it "samsung,cd-pinmux-gpio" property as suggested by
>>> Mitch Bradley <wmb@firmworks.com>
>>>
>>> Changes since v3:
>>>
>>> The patch series that adds device tree support for Samsung sdhci controller
>>> had six patches in total, of which, the first five patches have been accepted.
>>> The sixth patch in the series was dropped since it was using custom Samsung
>>> properties for descrbing the bus-width and card-detect gpio, but had otherwise
>>> addressed all the comments.
>>>
>>> This patch reworks the sixth patch in v3 of the sdhci device tree support
>>> patch series. The only change in this patch from the v3 version is the use of
>>> generic mmc bindings for descrbing the bus-width and card-detect gpio.
>>>
>>>  .../devicetree/bindings/mmc/samsung-sdhci.txt      |   53 +++++++
>>>  drivers/mmc/host/sdhci-s3c.c                       |  162 +++++++++++++++++++-
>>>  2 files changed, 209 insertions(+), 6 deletions(-)
>>>  create mode 100644 Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
>>
>> Hi Chris,
>>
>> This patch adds device tree support for sdhci-s3c driver. All the
>> comments for this patch has been addressed. Can this be queued for
>> v3.7?
>
> Yes, sounds good.  Jaehoon, perhaps you could give your Reviewed-by
> for me to add to the patch?  I've pushed this to mmc-next for 3.7
> now, after adding Jaehoon's else-if suggestion that wasn't acted on:
>
> diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
> index 3d91c7a..0c77b10 100644
> --- a/drivers/mmc/host/sdhci-s3c.c
> +++ b/drivers/mmc/host/sdhci-s3c.c
> @@ -461,22 +461,18 @@ static int __devinit sdhci_s3c_parse_dt(struct device *dev,
>         if (gpio_is_valid(gpio)) {
>                 pdata->cd_type = S3C_SDHCI_CD_GPIO;
>                 goto found_cd;
> -       } else {
> -               if (gpio != -ENOENT) {
> -                       dev_err(dev, "invalid card detect gpio specified\n");
> -                       return -EINVAL;
> -               }
> +       } else if (gpio != -ENOENT) {
> +               dev_err(dev, "invalid card detect gpio specified\n");
> +               return -EINVAL;
>         }
>
>         gpio = of_get_named_gpio(node, "samsung,cd-pinmux-gpio", 0);
>         if (gpio_is_valid(gpio)) {
>                 pdata->cd_type = S3C_SDHCI_CD_INTERNAL;
>                 goto found_cd;
> -       } else {
> -               if (gpio != -ENOENT) {
> -                       dev_err(dev, "invalid card detect gpio specified\n");
> -                       return -EINVAL;
> -               }
> +       } else if (gpio != -ENOENT) {
> +               dev_err(dev, "invalid card detect gpio specified\n");
> +               return -EINVAL;
>         }

Thank you Chris for your modification.

Regards,
Thomas.

>
>         dev_info(dev, "assuming no card detect line available\n");
>
> Thanks,
>
> - Chris.
> --
> Chris Ball   <cjb@laptop.org>   <http://printf.net/>
> One Laptop Per Child
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jaehoon Chung Sept. 18, 2012, 4:09 a.m. UTC | #2
On 09/18/2012 12:50 PM, Chris Ball wrote:
> Hi,
> 
> On Mon, Sep 17 2012, Thomas Abraham wrote:
>> On 23 August 2012 22:40, Thomas Abraham <thomas.abraham@linaro.org> wrote:
>>> Add device tree based discovery support for Samsung's sdhci controller
>>>
>>> Cc: Ben Dooks <ben-linux@fluff.org>
>>> Cc: Kukjin Kim <kgene.kim@samsung.com>
>>> Cc: Chris Ball <cjb@laptop.org>
>>> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
>>> ---
>>> Changes since v4:
>>> Adapted to new mmc core card detection bindings as specfied in the patch:
>>> [PATCH] mmc: dt: Add card-detection properties to core binding
>>> and extends it "samsung,cd-pinmux-gpio" property as suggested by
>>> Mitch Bradley <wmb@firmworks.com>
>>>
>>> Changes since v3:
>>>
>>> The patch series that adds device tree support for Samsung sdhci controller
>>> had six patches in total, of which, the first five patches have been accepted.
>>> The sixth patch in the series was dropped since it was using custom Samsung
>>> properties for descrbing the bus-width and card-detect gpio, but had otherwise
>>> addressed all the comments.
>>>
>>> This patch reworks the sixth patch in v3 of the sdhci device tree support
>>> patch series. The only change in this patch from the v3 version is the use of
>>> generic mmc bindings for descrbing the bus-width and card-detect gpio.
>>>
>>>  .../devicetree/bindings/mmc/samsung-sdhci.txt      |   53 +++++++
>>>  drivers/mmc/host/sdhci-s3c.c                       |  162 +++++++++++++++++++-
>>>  2 files changed, 209 insertions(+), 6 deletions(-)
>>>  create mode 100644 Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
>>
>> Hi Chris,
>>
>> This patch adds device tree support for sdhci-s3c driver. All the
>> comments for this patch has been addressed. Can this be queued for
>> v3.7?
> 
> Yes, sounds good.  Jaehoon, perhaps you could give your Reviewed-by
> for me to add to the patch?  I've pushed this to mmc-next for 3.7
> now, after adding Jaehoon's else-if suggestion that wasn't acted on:
Right, I suggested them. thanks Chris. Looks good to me this patch except for them.

Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
> 
> diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
> index 3d91c7a..0c77b10 100644
> --- a/drivers/mmc/host/sdhci-s3c.c
> +++ b/drivers/mmc/host/sdhci-s3c.c
> @@ -461,22 +461,18 @@ static int __devinit sdhci_s3c_parse_dt(struct device *dev,
>  	if (gpio_is_valid(gpio)) {
>  		pdata->cd_type = S3C_SDHCI_CD_GPIO;
>  		goto found_cd;
> -	} else {
> -		if (gpio != -ENOENT) {
> -			dev_err(dev, "invalid card detect gpio specified\n");
> -			return -EINVAL;
> -		}
> +	} else if (gpio != -ENOENT) {
> +		dev_err(dev, "invalid card detect gpio specified\n");
> +		return -EINVAL;
>  	}
>  
>  	gpio = of_get_named_gpio(node, "samsung,cd-pinmux-gpio", 0);
>  	if (gpio_is_valid(gpio)) {
>  		pdata->cd_type = S3C_SDHCI_CD_INTERNAL;
>  		goto found_cd;
> -	} else {
> -		if (gpio != -ENOENT) {
> -			dev_err(dev, "invalid card detect gpio specified\n");
> -			return -EINVAL;
> -		}
> +	} else if (gpio != -ENOENT) {
> +		dev_err(dev, "invalid card detect gpio specified\n");
> +		return -EINVAL;
>  	}
>  
>  	dev_info(dev, "assuming no card detect line available\n");
> 
> Thanks,
> 
> - Chris.
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 3d91c7a..0c77b10 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -461,22 +461,18 @@  static int __devinit sdhci_s3c_parse_dt(struct device *dev,
 	if (gpio_is_valid(gpio)) {
 		pdata->cd_type = S3C_SDHCI_CD_GPIO;
 		goto found_cd;
-	} else {
-		if (gpio != -ENOENT) {
-			dev_err(dev, "invalid card detect gpio specified\n");
-			return -EINVAL;
-		}
+	} else if (gpio != -ENOENT) {
+		dev_err(dev, "invalid card detect gpio specified\n");
+		return -EINVAL;
 	}
 
 	gpio = of_get_named_gpio(node, "samsung,cd-pinmux-gpio", 0);
 	if (gpio_is_valid(gpio)) {
 		pdata->cd_type = S3C_SDHCI_CD_INTERNAL;
 		goto found_cd;
-	} else {
-		if (gpio != -ENOENT) {
-			dev_err(dev, "invalid card detect gpio specified\n");
-			return -EINVAL;
-		}
+	} else if (gpio != -ENOENT) {
+		dev_err(dev, "invalid card detect gpio specified\n");
+		return -EINVAL;
 	}
 
 	dev_info(dev, "assuming no card detect line available\n");