Show patches with: Submitter = Tomi Valkeinen       |    State = Action Required       |   1100 patches
« 1 2 ... 8 9 10 11 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[7/8] OMAP: 4430SDP: remove DSI clock config from board file - - - --- 2012-08-23 Tomi Valkeinen New
[6/8] OMAPDSS: DSI: calculate dsi clock - - - --- 2012-08-23 Tomi Valkeinen New
[5/8] OMAPDSS: Add DSI fclk maximum to dss_features - - - --- 2012-08-23 Tomi Valkeinen New
[4/8] OMAPDSS: HDMI: use vdda_hdmi_dac - - - --- 2012-08-23 Tomi Valkeinen New
[3/8] OMAP4: TWL: add vdda_hdmi_dac regulator supply - - - --- 2012-08-23 Tomi Valkeinen New
[2/8] OMAPDSS: HDMI: Add delay to wait for 5V power - - - --- 2012-08-23 Tomi Valkeinen New
[1/8] OMAPDSS: HDMI: Move GPIO handling to HDMI driver - - - --- 2012-08-23 Tomi Valkeinen New
[2/2] OMAPFB: fix framebuffer console colors - - - --- 2012-08-21 Tomi Valkeinen New
[1/2] OMAPDSS: Fix SDI PLL locking - - - --- 2012-08-21 Tomi Valkeinen New
OMAPDSS: Add timings for ChiMei G121S1-L01/L02 and G121X1-L01 LCD displays - - - --- 2012-08-15 Tomi Valkeinen New
[12/12] OMAPFB: find best mode from edid - - - --- 2011-08-31 Tomi Valkeinen tomba New
[11/12] OMAP: Panda & Beagle: DVI: Add i2c_bus_num - - - --- 2011-08-31 Tomi Valkeinen New
[10/12] OMAP: DSS2: Generic-dpi: add detect & read_edid support - - - --- 2011-08-31 Tomi Valkeinen tomba New
[09/12] OMAP: DSS2: HDMI: implement detect() - - - --- 2011-08-31 Tomi Valkeinen tomba New
[08/12] OMAP: DSS2: HDMI: remove error prints in check_timings - - - --- 2011-08-31 Tomi Valkeinen tomba New
[07/12] OMAP: DSS2: HDMI: clean up edid reading & fix checksum - - - --- 2011-08-31 Tomi Valkeinen tomba New
[06/12] OMAP: DSS2: HDMI: split hdmi_core_ddc_edid - - - --- 2011-08-31 Tomi Valkeinen tomba New
[05/12] OMAP: DSS2: HDMI: remove edid parsing - - - --- 2011-08-31 Tomi Valkeinen tomba New
[04/12] OMAP: DSS2: HDMI: implement read_edid() - - - --- 2011-08-31 Tomi Valkeinen tomba New
[03/12] OMAP: DSS2: HDMI: make set_timing saner - - - --- 2011-08-31 Tomi Valkeinen tomba New
[02/12] OMAP: DSS2: add detect() to omap_dss_driver struct - - - --- 2011-08-31 Tomi Valkeinen tomba New
[01/12] OMAP: DSS2: add read_edid() to omap_dss_driver struct - - - --- 2011-08-31 Tomi Valkeinen tomba New
[8/8] OMAP: DSS2: HDMI: fix hdmi output enable - - - --- 2011-08-31 Tomi Valkeinen tomba New
[7/8] OMAP: DSS2: DISPC: improve dispc_mgr_enable_digit_out() - - - --- 2011-08-31 Tomi Valkeinen tomba New
[6/8] OMAP: DSS2: add dss_get_hdmi_venc_clk_source() - - - --- 2011-08-31 Tomi Valkeinen tomba New
[5/8] OMAP: DSS2: DISPC: Add missing IRQ definitions - - - --- 2011-08-31 Tomi Valkeinen tomba New
[4/8] OMAP: DSS2: DSI: Add comment about regn - - - --- 2011-08-31 Tomi Valkeinen tomba New
[3/8] OMAP: DSS2: HDMI: change regn definition - - - --- 2011-08-31 Tomi Valkeinen tomba New
[2/8] OMAP: DSS2: HDMI: use default dividers - - - --- 2011-08-31 Tomi Valkeinen tomba New
[1/8] OMAP: DSS2: DISPC: Fix minimum PCD value - - - --- 2011-08-31 Tomi Valkeinen tomba New
[9/9] OMAP: HWMOD: Unify DSS resets for OMAPs - - - --- 2011-08-23 Tomi Valkeinen tomba New
[8/9] OMAP2/3: HWMOD: Add SYSS_HAS_RESET_STATUS for dss - - - --- 2011-08-23 Tomi Valkeinen tomba New
[7/9] OMAP4: HWMOD: fix DSS clock data - - - --- 2011-08-23 Tomi Valkeinen tomba New
[6/9] OMAP4: HWMOD: Add HWMOD_CONTROL_OPT_CLKS_IN_RESET for dss_core - - - --- 2011-08-23 Tomi Valkeinen tomba New
[5/9] OMAP4: HWMOD: remove extra clocks - - - --- 2011-08-23 Tomi Valkeinen New
[4/9] OMAP3: HWMOD: fix DSS clock data - - - --- 2011-08-23 Tomi Valkeinen tomba New
[3/9] OMAP3: HWMOD: Fix DSS reset - - - --- 2011-08-23 Tomi Valkeinen tomba New
[2/9] OMAP2xxx: HWMOD: fix DSS clock data - - - --- 2011-08-23 Tomi Valkeinen tomba New
[1/9] OMAP2xxx: HWMOD: Fix DSS reset - - - --- 2011-08-23 Tomi Valkeinen tomba New
[10/10] OMAP: DSS2: reorganize functions in dss.h - - - --- 2011-08-22 Tomi Valkeinen tomba New
[09/10] OMAP: DSS2: DISPC: rename manager related funcs - - - --- 2011-08-22 Tomi Valkeinen tomba New
[08/10] OMAP: DSS2: DISPC: rename overlay related funcs - - - --- 2011-08-22 Tomi Valkeinen tomba New
[07/10] OMAP: DSS2: DISPC: remove non-existing func prototypes - - - --- 2011-08-22 Tomi Valkeinen tomba New
[06/10] OMAP: OMAPFB: string parsing cleanups - - - --- 2011-08-22 Tomi Valkeinen tomba New
[05/10] OMAP: DSS2: string parsing cleanups - - - --- 2011-08-22 Tomi Valkeinen tomba New
[04/10] OMAP: DSS2: Add GLOBAL_ALPHA & PRE_MULT_ALPHA to ovl caps - - - --- 2011-08-22 Tomi Valkeinen tomba New
[03/10] OMAP: DSS2: Add overlay caps to DSS features - - - --- 2011-08-22 Tomi Valkeinen tomba New
[02/10] OMAP: DSS2: DISPC: use lookup tables for bit shifts - - - --- 2011-08-22 Tomi Valkeinen tomba New
[01/10] OMAP: DSS2: Remove support for non-DISPC overlays - - - --- 2011-08-22 Tomi Valkeinen tomba New
[4/4] OMAP: DSS2: Remove "EXPERIMENTAL" from Kconfig - - - --- 2011-08-22 Tomi Valkeinen tomba New
[3/4] OMAP: DSS2: Handle manager change in apply - - - --- 2011-08-22 Tomi Valkeinen tomba New
[2/4] OMAP: DSS2: fix clock sources on error and uninit - - - --- 2011-08-22 Tomi Valkeinen tomba New
[1/4] OMAP: OMAPFB: make omapfb start even when a display is missing a driver - - - --- 2011-08-22 Tomi Valkeinen tomba New
[4/4] OMAP: DSS2: Implement dsi_mux_pads for OMAP4 - - - --- 2011-08-22 Tomi Valkeinen tomba New
[3/4] OMAP: DSS2: DSI: Improve dsi_mux_pads parameters - - - --- 2011-08-22 Tomi Valkeinen tomba New
[2/4] OMAP4: TWL: Add common omapdss supplies - - - --- 2011-08-22 Tomi Valkeinen tomba New
[1/4] OMAP: DSS2: Change DSI device naming - - - --- 2011-08-22 Tomi Valkeinen tomba New
[3/3] OMAP: DSS2: remove unneeded fck enable/disables - - - --- 2011-08-22 Tomi Valkeinen tomba New
[2/3] Revert "OMAP: DSS2: HDMI: fix hdmi clock name" - - - --- 2011-08-22 Tomi Valkeinen tomba New
[1/3] Revert "HACK: OMAP: DSS2: clk hack for OMAP2/3" - - - --- 2011-08-22 Tomi Valkeinen tomba New
[PATCHv2,5/5] OMAP: HWMOD: Unify DSS resets for all OMAPs - - - --- 2011-08-08 Tomi Valkeinen New
[PATCHv2,4/5] OMAP2/3: HWMOD: Add SYSS_HAS_RESET_STATUS for dss - - - --- 2011-08-08 Tomi Valkeinen New
[PATCHv2,3/5] OMAP4: HWMOD: fix DSS opt clocks - - - --- 2011-08-08 Tomi Valkeinen New
[PATCHv2,2/5] OMAP3: HWMOD: fix DSS opt clocks - - - --- 2011-08-08 Tomi Valkeinen New
[PATCHv2,1/5] OMAP2xxx: HWMOD: fix DSS opt clocks - - - --- 2011-08-08 Tomi Valkeinen New
[4/4] OMAP4: HWMOD: fix DSS reset - - - --- 2011-08-02 Tomi Valkeinen New
[3/4] OMAP4: HWMOD: fix DSS opt clocks - - - --- 2011-08-02 Tomi Valkeinen New
[2/4] OMAP3: HWMOD: fix DSS opt clocks - - - --- 2011-08-02 Tomi Valkeinen New
[1/4] OMAP2xxx: HWMOD: fix DSS opt clocks - - - --- 2011-08-02 Tomi Valkeinen New
[PATCHv2,2/2] OMAP: add omap_device_reset() - - - --- 2011-05-27 Tomi Valkeinen New
[PATCHv2,1/2] OMAP: change get_context_loss_count ret value to int - - - --- 2011-05-27 Tomi Valkeinen New
[3/3] OMAP: Add (omap_device|omap_hwmod)_can_ever_lose_context functions - - - --- 2011-05-26 Tomi Valkeinen New
[2/3] OMAP: add omap_device_reset() - - - --- 2011-05-26 Tomi Valkeinen New
[1/3] OMAP: change get_context_loss_count ret value to int - - - --- 2011-05-26 Tomi Valkeinen New
context_loss_count error value - - - --- 2011-05-25 Tomi Valkeinen New
Using DSI PLL for LCD pixel clock - - - --- 2011-05-23 Tomi Valkeinen New
[4/6] OMAP: LDP: Port the display driver to new DSS2 - - - --- 2011-05-16 Tomi Valkeinen New
[6/6] OMAP: Apollon: Port the display driver to new DSS2 - - - --- 2011-05-09 Tomi Valkeinen tomba New
[5/6] OMAP: H4: Port the display driver to new DSS2 - - - --- 2011-05-09 Tomi Valkeinen tomba New
[4/6] OMAP: LDP: Port the display driver to new DSS2 - - - --- 2011-05-09 Tomi Valkeinen tomba New
[3/6] OMAP: 2420SDP: Port the display driver to new DSS2 - - - --- 2011-05-09 Tomi Valkeinen tomba New
[2/6] OMAP: omap3touchbook: Remove unused lcd stuff - - - --- 2011-05-09 Tomi Valkeinen tomba New
[1/6] OMAP: RX51: Remove unused old omapfb stuff - - - --- 2011-05-09 Tomi Valkeinen tomba New
[1/9] OMAP: DSS2: Change DSI platform device name from "omapdss_dsi1" to "omapdss_dsi" - - - --- 2011-05-05 Tomi Valkeinen tomba New
[7/7] OMAP: Apollon: Port the display driver to new DSS2 - - - --- 2011-05-04 Tomi Valkeinen tomba New
[6/7] OMAP: H4: Port the display driver to new DSS2 - - - --- 2011-05-04 Tomi Valkeinen tomba New
[5/7] OMAP: LDP: Port the display driver to new DSS2 - - - --- 2011-05-04 Tomi Valkeinen tomba New
[4/7] OMAP: 2420SDP: Port the display driver to new DSS2 - - - --- 2011-05-04 Tomi Valkeinen tomba New
[3/7] OMAP: omap3touchbook: Remove unused lcd stuff - - - --- 2011-05-04 Tomi Valkeinen New
[2/7] OMAP: RX51: Remove unused old omapfb stuff - - - --- 2011-05-04 Tomi Valkeinen tomba New
[1/7] OMAP: OMAPFB: Remove unused lcd drivers - - - --- 2011-05-04 Tomi Valkeinen tomba New
[RFC] Consolidate SRAM support - - - --- 2011-04-19 Tomi Valkeinen tmlind New
OMAP4 DSS clock setup - - - --- 2011-04-04 Tomi Valkeinen pwsan New
[6/6] OMAP: DSS2: DSI: fix IRQ debug prints - - - --- 2011-03-09 Tomi Valkeinen tomba New
[5/6] OMAP: DSS2: DSI: catch DSI errors in send_bta_sync - - - --- 2011-03-09 Tomi Valkeinen tomba New
[4/6] OMAP: DSS2: DSI: use ISR for BTA in framedone - - - --- 2011-03-09 Tomi Valkeinen tomba New
[3/6] OMAP: DSS2: DSI: use ISR in send_bta_sync - - - --- 2011-03-09 Tomi Valkeinen tomba New
[2/6] OMAP: DSS2: DSI: Add ISR support - - - --- 2011-03-09 Tomi Valkeinen tomba New
[1/6] OMAP: DSS2: DSI: Restructure IRQ handler - - - --- 2011-03-09 Tomi Valkeinen tomba New
OMAP: DSS2: Delay regulator_get() calls - - - --- 2011-02-23 Tomi Valkeinen tomba New
« 1 2 ... 8 9 10 11 »