diff mbox series

[1/6] dt-bindings: omap: Update PRM binding for genpd

Message ID 20200520211334.61814-2-tony@atomide.com (mailing list archive)
State New, archived
Headers show
Series Add initial genpd support for omap PRM driver | expand

Commit Message

Tony Lindgren May 20, 2020, 9:13 p.m. UTC
The PRM (Power and Reset Module) has registers to enable and disable
power domains, so let's update the binding for that.

Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 Documentation/devicetree/bindings/arm/omap/prm-inst.txt | 2 ++
 1 file changed, 2 insertions(+)

Comments

Rob Herring (Arm) May 28, 2020, 10:20 p.m. UTC | #1
On Wed, May 20, 2020 at 02:13:29PM -0700, Tony Lindgren wrote:
> The PRM (Power and Reset Module) has registers to enable and disable
> power domains, so let's update the binding for that.

multiple domains? Then why 0 cells?

> 
> Cc: devicetree@vger.kernel.org
> Cc: Rob Herring <robh@kernel.org>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
>  Documentation/devicetree/bindings/arm/omap/prm-inst.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/omap/prm-inst.txt b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
> --- a/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
> +++ b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
> @@ -18,6 +18,7 @@ Required properties:
>  		(base address and length)
>  
>  Optional properties:
> +- #power-domain-cells:	Should be 0 if the PRM instance is a power domain.

...power domain provider.

>  - #reset-cells:	Should be 1 if the PRM instance in question supports resets.
>  
>  Example:
> @@ -25,5 +26,6 @@ Example:
>  prm_dsp2: prm@1b00 {
>  	compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
>  	reg = <0x1b00 0x40>;
> +	#power-domain-cells = <0>;
>  	#reset-cells = <1>;
>  };
> -- 
> 2.26.2
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/omap/prm-inst.txt b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
--- a/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
+++ b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
@@ -18,6 +18,7 @@  Required properties:
 		(base address and length)
 
 Optional properties:
+- #power-domain-cells:	Should be 0 if the PRM instance is a power domain.
 - #reset-cells:	Should be 1 if the PRM instance in question supports resets.
 
 Example:
@@ -25,5 +26,6 @@  Example:
 prm_dsp2: prm@1b00 {
 	compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
 	reg = <0x1b00 0x40>;
+	#power-domain-cells = <0>;
 	#reset-cells = <1>;
 };