diff mbox series

[12/13] ARM: dts: omap4-panda-common: Add watchdog timers for IPU and DSP

Message ID 20200709231954.1973-13-s-anna@ti.com (mailing list archive)
State New, archived
Headers show
Series Add IPU & DSP remoteprocs on OMAP4 and OMAP5 | expand

Commit Message

Suman Anna July 9, 2020, 11:19 p.m. UTC
The watchdog timers have been added for the IPU and DSP remoteproc
devices on all the OMAP4-based Panda boards. The following timers
are used as the watchdog timers,
	DSP : GPT6
	IPU : GPT9 & GPT11 (one for each Cortex-M3 core)

The MPU-side drivers will use this data to initialize the watchdog
timers, and listen for any watchdog triggers. The BIOS-side code
needs to configure and refresh these timers properly to not throw
a watchdog error.

These timers can be changed or removed as per the system integration
needs, alongside appropriate equivalent changes on the firmware side.

Signed-off-by: Suman Anna <s-anna@ti.com>
---
 arch/arm/boot/dts/omap4-panda-common.dtsi | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index db0b7e9264f9..a6a0c7b832dd 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -596,10 +596,12 @@  &dsp {
 	status = "okay";
 	memory-region = <&dsp_memory_region>;
 	ti,timers = <&timer5>;
+	ti,watchdog-timers = <&timer6>;
 };
 
 &ipu {
 	status = "okay";
 	memory-region = <&ipu_memory_region>;
 	ti,timers = <&timer3>;
+	ti,watchdog-timers = <&timer9>, <&timer11>;
 };