diff mbox series

[v4,16/18] PCI: j721e: Use dev_err_probe() in the probe() function

Message ID 20240102-j7200-pcie-s2r-v4-16-6f1f53390c85@bootlin.com (mailing list archive)
State New
Headers show
Series Add suspend to ram support for PCIe on J7200 | expand

Commit Message

Thomas Richard March 4, 2024, 3:35 p.m. UTC 
Use dev_err_probe() instead of dev_err() in the probe() function to
simplify the code and standardize the error output.

Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
---
 drivers/pci/controller/cadence/pci-j721e.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

Comments

Francesco Dolcini April 10, 2024, 7:51 a.m. UTC | #1 
On Mon, Mar 04, 2024 at 04:35:59PM +0100, Thomas Richard wrote:
> Use dev_err_probe() instead of dev_err() in the probe() function to
> simplify the code and standardize the error output.
> 
> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>

Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>

Franceco
diff mbox series

Patch

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 85718246016b..98484f001562 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -482,20 +482,20 @@  static int j721e_pcie_probe(struct platform_device *pdev)
 	pm_runtime_enable(dev);
 	ret = pm_runtime_get_sync(dev);
 	if (ret < 0) {
-		dev_err(dev, "pm_runtime_get_sync failed\n");
+		dev_err_probe(dev, ret, "pm_runtime_get_sync failed\n");
 		goto err_get_sync;
 	}
 
 	ret = j721e_pcie_ctrl_init(pcie);
 	if (ret < 0) {
-		dev_err(dev, "pm_runtime_get_sync failed\n");
+		dev_err_probe(dev, ret, "pm_runtime_get_sync failed\n");
 		goto err_get_sync;
 	}
 
 	ret = devm_request_irq(dev, irq, j721e_pcie_link_irq_handler, 0,
 			       "j721e-pcie-link-down-irq", pcie);
 	if (ret < 0) {
-		dev_err(dev, "failed to request link state IRQ %d\n", irq);
+		dev_err_probe(dev, ret, "failed to request link state IRQ %d\n", irq);
 		goto err_get_sync;
 	}
 
@@ -505,28 +505,25 @@  static int j721e_pcie_probe(struct platform_device *pdev)
 	case PCI_MODE_RC:
 		gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
 		if (IS_ERR(gpiod)) {
-			ret = PTR_ERR(gpiod);
-			if (ret != -EPROBE_DEFER)
-				dev_err(dev, "Failed to get reset GPIO\n");
+			ret = dev_err_probe(dev, PTR_ERR(gpiod), "Failed to get reset GPIO\n");
 			goto err_get_sync;
 		}
 
 		ret = cdns_pcie_init_phy(dev, cdns_pcie);
 		if (ret) {
-			dev_err(dev, "Failed to init phy\n");
+			dev_err_probe(dev, ret, "Failed to init phy\n");
 			goto err_get_sync;
 		}
 
 		clk = devm_clk_get_optional(dev, "pcie_refclk");
 		if (IS_ERR(clk)) {
-			ret = PTR_ERR(clk);
-			dev_err(dev, "failed to get pcie_refclk\n");
+			ret = dev_err_probe(dev, PTR_ERR(clk), "failed to get pcie_refclk\n");
 			goto err_pcie_setup;
 		}
 
 		ret = clk_prepare_enable(clk);
 		if (ret) {
-			dev_err(dev, "failed to enable pcie_refclk\n");
+			dev_err_probe(dev, ret, "failed to enable pcie_refclk\n");
 			goto err_pcie_setup;
 		}
 		pcie->refclk = clk;
@@ -554,7 +551,7 @@  static int j721e_pcie_probe(struct platform_device *pdev)
 	case PCI_MODE_EP:
 		ret = cdns_pcie_init_phy(dev, cdns_pcie);
 		if (ret) {
-			dev_err(dev, "Failed to init phy\n");
+			dev_err_probe(dev, ret, "Failed to init phy\n");
 			goto err_get_sync;
 		}