@@ -1091,14 +1091,23 @@ per_abe_x1_dclk_div: clock-per-abe-x1-dclk-div@1bc {
ti,index-power-of-two;
};
- dsp_gclk_div: clock-dsp-gclk-div@18c {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clock-output-names = "dsp_gclk_div";
- clocks = <&dpll_dsp_m2_ck>;
- ti,max-div = <64>;
- reg = <0x018c>;
- ti,index-power-of-two;
+ /* CM_CLKSEL_DPLL_USB */
+ clock@18c {
+ compatible = "ti,clksel";
+ reg = <0x18c>;
+ #clock-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dsp_gclk_div: clock@0 {
+ reg = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dsp_gclk_div";
+ clocks = <&dpll_dsp_m2_ck>;
+ ti,max-div = <64>;
+ ti,index-power-of-two;
+ #clock-cells = <0>;
+ };
};
gpu_dclk: clock-gpu-dclk@1a0 {
@@ -1445,13 +1454,21 @@ func_96m_aon_dclk_div: clock-func-96m-aon-dclk-div {
clock-div = <1>;
};
- dpll_usb_byp_mux: clock-dpll-usb-byp-mux-23@18c {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clock-output-names = "dpll_usb_byp_mux";
- clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
- ti,bit-shift = <23>;
- reg = <0x018c>;
+ /* CM_CLKSEL_DPLL_USB */
+ clock@18c {
+ compatible = "ti,clksel";
+ reg = <0x18c>;
+ #clock-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dpll_usb_byp_mux: clock@23 {
+ reg = <23>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "dpll_usb_byp_mux";
+ clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
+ #clock-cells = <0>;
+ };
};
dpll_usb_ck: clock@180 {
With the clkcsel binding we can drop the custom ti,bit-shift devicetree property in favor of the standard reg property and reduce the number of clocks to update for the make W-1 dtbs warnings. Let's also add a comment for the clocksel clock that matches the documentation. Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/ti/omap/dra7xx-clocks.dtsi | 47 +++++++++++++------- 1 file changed, 32 insertions(+), 15 deletions(-)