diff mbox series

[1/4] cpufreq: ti-cpufreq: add support for omap34xx and omap36xx

Message ID 4be59d06df1266edc1a62cba7ce92cc402f962dc.1567878413.git.hns@goldelico.com (mailing list archive)
State New, archived
Headers show
Series OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits | expand

Commit Message

H. Nikolaus Schaller Sept. 7, 2019, 5:46 p.m. UTC
This adds code and tables to read the silicon revision and
eFuse (speed binned / 720 MHz grade) bits for selecting
opp-v2 table entries.

Since these bits are not always part of the syscon register
range (like for am33xx, am43, dra7), we add code to directly
read the register values using ioremap() if syscon access fails.

The format of the opp-supported-hw entries is that it has
two 32 bit bitfields. E.g.:

	opp-supported-hw = <0xffffffff 3>

The first value is matched against the bit position of the
silicon revision which is (see TRM)

omap34xx:
BIT(0)	ES1.0
BIT(1)	ES2.0
BIT(2)	ES2.1
BIT(3)	ES3.0
BIT(4)	ES3.1
BIT(7)	ES3.1.2

omap36xx:
BIT(0)	ES1.0
BIT(1)	ES1.1
BIT(2)	ES1.2

The second value is matched against the speed grade eFuse:

BIT(0)	no high speed OPP
BIT(1)	high speed OPP

This means for the example above that it is always enabled
while e.g.

	opp-supported-hw = <0x1 2>

enables the OPP only for ES1.0 BIT(0) and if the high speed
eFuse is set BIT(1).

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
---
 drivers/cpufreq/ti-cpufreq.c | 91 +++++++++++++++++++++++++++++++++++-
 1 file changed, 89 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
index 2ad1ae17932d..f2f58d689320 100644
--- a/drivers/cpufreq/ti-cpufreq.c
+++ b/drivers/cpufreq/ti-cpufreq.c
@@ -31,6 +31,11 @@ 
 #define DRA7_EFUSE_OD_MPU_OPP			BIT(1)
 #define DRA7_EFUSE_HIGH_MPU_OPP			BIT(2)
 
+#define OMAP3_CONTROL_DEVICE_STATUS		0x4800244C
+#define OMAP3_CONTROL_IDCODE			0x4830A204
+#define OMAP34xx_ProdID_SKUID			0x4830A20C
+#define OMAP3_SYSCON_BASE	(0x48000000 + 0x2000 + 0x270)
+
 #define VERSION_COUNT				2
 
 struct ti_cpufreq_data;
@@ -84,6 +89,13 @@  static unsigned long dra7_efuse_xlate(struct ti_cpufreq_data *opp_data,
 	return calculated_efuse;
 }
 
+static unsigned long omap3_efuse_xlate(struct ti_cpufreq_data *opp_data,
+				      unsigned long efuse)
+{
+	/* OPP enable bit ("Speed Binned") */
+	return BIT(efuse);
+}
+
 static struct ti_cpufreq_soc_data am3x_soc_data = {
 	.efuse_xlate = amx3_efuse_xlate,
 	.efuse_fallback = AM33XX_800M_ARM_MPU_MAX_FREQ,
@@ -111,6 +123,56 @@  static struct ti_cpufreq_soc_data dra7_soc_data = {
 	.multi_regulator = true,
 };
 
+/*
+ * OMAP35x TRM (SPRUF98K):
+ *  CONTROL_IDCODE (0x4830 A204) describes Silicon revisions.
+ *  Control OMAP Status Register 15:0 (Address 0x4800 244C)
+ *    to separate between omap3503, omap3515, omap3525, omap3530
+ *    and feature presence.
+ *    There are encodings for versions limited to 400/266MHz
+ *    but we ignore.
+ *    Not clear if this also holds for omap34xx.
+ *  some eFuse values e.g. CONTROL_FUSE_OPP1_VDD1
+ *    are stored in the SYSCON register range
+ *  Register 0x4830A20C [ProdID.SKUID] [0:3]
+ *    0x0 for normal 600/430MHz device.
+ *    0x8 for 720/520MHz device.
+ *    Not clear what omap34xx value is.
+ */
+
+static struct ti_cpufreq_soc_data omap34xx_soc_data = {
+	.efuse_xlate = omap3_efuse_xlate,
+	.efuse_offset = OMAP34xx_ProdID_SKUID - OMAP3_SYSCON_BASE,
+	.efuse_shift = 3,
+	.efuse_mask = BIT(3),
+	.rev_offset = OMAP3_CONTROL_IDCODE - OMAP3_SYSCON_BASE,
+	.multi_regulator = false,
+};
+
+/*
+ * AM/DM37x TRM (SPRUGN4M)
+ *  CONTROL_IDCODE (0x4830 A204) describes Silicon revisions.
+ *  Control Device Status Register 15:0 (Address 0x4800 244C)
+ *    to separate between am3703, am3715, dm3725, dm3730
+ *    and feature presence.
+ *   Speed Binned = Bit 9
+ *     0 800/600 MHz
+ *     1 1000/800 MHz
+ *  some eFuse values e.g. CONTROL_FUSE_OPP 1G_VDD1
+ *    are stored in the SYSCON register range.
+ *  There is no 0x4830A20C [ProdID.SKUID] register (exists but
+ *    seems to always read as 0).
+ */
+
+static struct ti_cpufreq_soc_data omap36xx_soc_data = {
+	.efuse_xlate = omap3_efuse_xlate,
+	.efuse_offset = OMAP3_CONTROL_DEVICE_STATUS - OMAP3_SYSCON_BASE,
+	.efuse_shift = 9,
+	.efuse_mask = BIT(9),
+	.rev_offset = OMAP3_CONTROL_IDCODE - OMAP3_SYSCON_BASE,
+	.multi_regulator = false,
+};
+
 /**
  * ti_cpufreq_get_efuse() - Parse and return efuse value present on SoC
  * @opp_data: pointer to ti_cpufreq_data context
@@ -127,7 +189,17 @@  static int ti_cpufreq_get_efuse(struct ti_cpufreq_data *opp_data,
 
 	ret = regmap_read(opp_data->syscon, opp_data->soc_data->efuse_offset,
 			  &efuse);
-	if (ret) {
+	if (ret == -EIO) {
+		/* not a syscon register! */
+		void __iomem *regs = ioremap(OMAP3_SYSCON_BASE +
+				opp_data->soc_data->efuse_offset, 4);
+
+		if (!regs)
+			return -ENOMEM;
+		efuse = readl(regs);
+		iounmap(regs);
+		}
+	else if (ret) {
 		dev_err(dev,
 			"Failed to read the efuse value from syscon: %d\n",
 			ret);
@@ -158,7 +230,17 @@  static int ti_cpufreq_get_rev(struct ti_cpufreq_data *opp_data,
 
 	ret = regmap_read(opp_data->syscon, opp_data->soc_data->rev_offset,
 			  &revision);
-	if (ret) {
+	if (ret == -EIO) {
+		/* not a syscon register! */
+		void __iomem *regs = ioremap(OMAP3_SYSCON_BASE +
+				opp_data->soc_data->rev_offset, 4);
+
+		if (!regs)
+			return -ENOMEM;
+		revision = readl(regs);
+		iounmap(regs);
+		}
+	else if (ret) {
 		dev_err(dev,
 			"Failed to read the revision number from syscon: %d\n",
 			ret);
@@ -190,6 +272,11 @@  static const struct of_device_id ti_cpufreq_of_match[] = {
 	{ .compatible = "ti,am33xx", .data = &am3x_soc_data, },
 	{ .compatible = "ti,am43", .data = &am4x_soc_data, },
 	{ .compatible = "ti,dra7", .data = &dra7_soc_data },
+	{ .compatible = "ti,omap34xx", .data = &omap34xx_soc_data, },
+	{ .compatible = "ti,omap36xx", .data = &omap36xx_soc_data, },
+	/* legacy */
+	{ .compatible = "ti,omap3430", .data = &omap34xx_soc_data, },
+	{ .compatible = "ti,omap3630", .data = &omap36xx_soc_data, },
 	{},
 };