diff mbox series

[2/4] ARM: dts: replace opp-v1 tables by opp-v2 for omap34xx and omap36xx

Message ID 784d0d08ee585fc436f15de4edb58b394d0f4452.1567878413.git.hns@goldelico.com (mailing list archive)
State New, archived
Headers show
Series OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits | expand

Commit Message

H. Nikolaus Schaller Sept. 7, 2019, 5:46 p.m. UTC
In addition, move omap3 from whitelist to blacklist in cpufreq-dt-platdev
in the same patch, because doing either first breaks operation and
may make trouble in bisect.

We also can remove opp-v1 table for omap3-n950-n9 since it is now
automatically detected.

We also fix a wrong OPP4 voltage for omap3430 which must be
0.6V + 54*12.5mV = 1275mV. Otherwise the twl4030 driver will reject
this OPP.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap3-n950-n9.dtsi |  7 ---
 arch/arm/boot/dts/omap34xx.dtsi      | 65 ++++++++++++++++++++++++----
 arch/arm/boot/dts/omap36xx.dtsi      | 53 +++++++++++++++++++----
 drivers/cpufreq/cpufreq-dt-platdev.c |  2 +-
 4 files changed, 102 insertions(+), 25 deletions(-)

Comments

Adam Ford Sept. 9, 2019, 1:43 p.m. UTC | #1
On Sat, Sep 7, 2019 at 12:47 PM H. Nikolaus Schaller <hns@goldelico.com> wrote:
>
> In addition, move omap3 from whitelist to blacklist in cpufreq-dt-platdev
> in the same patch, because doing either first breaks operation and
> may make trouble in bisect.
>
> We also can remove opp-v1 table for omap3-n950-n9 since it is now
> automatically detected.
>
> We also fix a wrong OPP4 voltage for omap3430 which must be
> 0.6V + 54*12.5mV = 1275mV. Otherwise the twl4030 driver will reject
> this OPP.
>
thank you for your work on this.  I tested it on a a Logit PD DM3730
Torpedo + Wireless kit, and appears to operate normally, but i have
not tested it at temperature.

Tested-by: Adam Ford <aford173@gmail.com>

> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
> Acked-by: Tony Lindgren <tony@atomide.com>
> ---
>  arch/arm/boot/dts/omap3-n950-n9.dtsi |  7 ---
>  arch/arm/boot/dts/omap34xx.dtsi      | 65 ++++++++++++++++++++++++----
>  arch/arm/boot/dts/omap36xx.dtsi      | 53 +++++++++++++++++++----
>  drivers/cpufreq/cpufreq-dt-platdev.c |  2 +-
>  4 files changed, 102 insertions(+), 25 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
> index 5441e9ffdbb4..e98b0c615f19 100644
> --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
> +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
> @@ -11,13 +11,6 @@
>         cpus {
>                 cpu@0 {
>                         cpu0-supply = <&vcc>;
> -                       operating-points = <
> -                               /* kHz    uV */
> -                               300000  1012500
> -                               600000  1200000
> -                               800000  1325000
> -                               1000000 1375000
> -                       >;
>                 };
>         };
>
> diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
> index f572a477f74c..91154829f86a 100644
> --- a/arch/arm/boot/dts/omap34xx.dtsi
> +++ b/arch/arm/boot/dts/omap34xx.dtsi
> @@ -16,19 +16,66 @@
>  / {
>         cpus {
>                 cpu: cpu@0 {
> -                       /* OMAP343x/OMAP35xx variants OPP1-5 */
> -                       operating-points = <
> -                               /* kHz    uV */
> -                               125000   975000
> -                               250000  1075000
> -                               500000  1200000
> -                               550000  1270000
> -                               600000  1350000
> -                       >;
> +                       /* OMAP343x/OMAP35xx variants OPP1-6 */
> +                       operating-points-v2 = <&cpu0_opp_table>;
> +
>                         clock-latency = <300000>; /* From legacy driver */
>                 };
>         };
>
> +       /* see Documentation/devicetree/bindings/opp/opp.txt */
> +       cpu0_opp_table: opp-table {
> +               compatible = "operating-points-v2-ti-cpu";
> +               syscon = <&scm_conf>;
> +
> +               opp1-125000000 {
> +                       opp-hz = /bits/ 64 <125000000>;
> +                       /*
> +                        * we currently only select the max voltage from table
> +                        * Table 3-3 of the omap3530 Data sheet (SPRS507F).
> +                        * Format is: <target min max>
> +                        */
> +                       opp-microvolt = <975000 975000 975000>;
> +                       /*
> +                        * first value is silicon revision bit mask
> +                        * second one 720MHz Device Identification bit mask
> +                        */
> +                       opp-supported-hw = <0xffffffff 3>;
> +               };
> +
> +               opp2-250000000 {
> +                       opp-hz = /bits/ 64 <250000000>;
> +                       opp-microvolt = <1075000 1075000 1075000>;
> +                       opp-supported-hw = <0xffffffff 3>;
> +                       opp-suspend;
> +               };
> +
> +               opp3-500000000 {
> +                       opp-hz = /bits/ 64 <500000000>;
> +                       opp-microvolt = <1200000 1200000 1200000>;
> +                       opp-supported-hw = <0xffffffff 3>;
> +               };
> +
> +               opp4-550000000 {
> +                       opp-hz = /bits/ 64 <550000000>;
> +                       opp-microvolt = <1275000 1275000 1275000>;
> +                       opp-supported-hw = <0xffffffff 3>;
> +               };
> +
> +               opp5-600000000 {
> +                       opp-hz = /bits/ 64 <600000000>;
> +                       opp-microvolt = <1350000 1350000 1350000>;
> +                       opp-supported-hw = <0xffffffff 3>;
> +               };
> +
> +               opp6-720000000 {
> +                       opp-hz = /bits/ 64 <720000000>;
> +                       opp-microvolt = <1350000 1350000 1350000>;
> +                       /* only high-speed grade omap3530 devices */
> +                       opp-supported-hw = <0xffffffff 2>;
> +               };
> +       };
> +
>         ocp@68000000 {
>                 omap3_pmx_core2: pinmux@480025d8 {
>                         compatible = "ti,omap3-padconf", "pinctrl-single";
> diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
> index 6fb23ada1f64..44f25b0eb45b 100644
> --- a/arch/arm/boot/dts/omap36xx.dtsi
> +++ b/arch/arm/boot/dts/omap36xx.dtsi
> @@ -19,15 +19,52 @@
>         };
>
>         cpus {
> -               /* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */
> +               /* OMAP3630/OMAP37xx variants OPP50 to OPP130 and OPP1G */
>                 cpu: cpu@0 {
> -                       operating-points = <
> -                               /* kHz    uV */
> -                               300000  1012500
> -                               600000  1200000
> -                               800000  1325000
> -                       >;
> -                       clock-latency = <300000>; /* From legacy driver */
> +                       operating-points-v2 = <&cpu0_opp_table>;
> +
> +                       clock-latency = <300000>; /* From omap-cpufreq driver */
> +               };
> +       };
> +
> +       /* see Documentation/devicetree/bindings/opp/opp.txt */
> +       cpu0_opp_table: opp-table {
> +               compatible = "operating-points-v2-ti-cpu";
> +               syscon = <&scm_conf>;
> +
> +               opp50-300000000 {
> +                       opp-hz = /bits/ 64 <300000000>;
> +                       /*
> +                        * we currently only select the max voltage from table
> +                        * Table 4-19 of the DM3730 Data sheet (SPRS685B)
> +                        * Format is: <target min max>
> +                        */
> +                       opp-microvolt = <1012500 1012500 1012500>;
> +                       /*
> +                        * first value is silicon revision bit mask
> +                        * second one is "speed binned" bit mask
> +                        */
> +                       opp-supported-hw = <0xffffffff 3>;
> +                       opp-suspend;
> +               };
> +
> +               opp100-600000000 {
> +                       opp-hz = /bits/ 64 <600000000>;
> +                       opp-microvolt = <1200000 1200000 1200000>;
> +                       opp-supported-hw = <0xffffffff 3>;
> +               };
> +
> +               opp130-800000000 {
> +                       opp-hz = /bits/ 64 <800000000>;
> +                       opp-microvolt = <1325000 1325000 1325000>;
> +                       opp-supported-hw = <0xffffffff 3>;
> +               };
> +
> +               opp1g-1000000000 {
> +                       opp-hz = /bits/ 64 <1000000000>;
> +                       opp-microvolt = <1375000 1375000 1375000>;
> +                       /* only on am/dm37x with speed-binned bit set */
> +                       opp-supported-hw = <0xffffffff 2>;
>                 };
>         };
>
> diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
> index 03dc4244ab00..68b7fc4225f8 100644
> --- a/drivers/cpufreq/cpufreq-dt-platdev.c
> +++ b/drivers/cpufreq/cpufreq-dt-platdev.c
> @@ -86,7 +86,6 @@ static const struct of_device_id whitelist[] __initconst = {
>         { .compatible = "st-ericsson,u9540", },
>
>         { .compatible = "ti,omap2", },
> -       { .compatible = "ti,omap3", },
>         { .compatible = "ti,omap4", },
>         { .compatible = "ti,omap5", },
>
> @@ -132,6 +131,7 @@ static const struct of_device_id blacklist[] __initconst = {
>         { .compatible = "ti,am33xx", },
>         { .compatible = "ti,am43", },
>         { .compatible = "ti,dra7", },
> +       { .compatible = "ti,omap3", },
>
>         { }
>  };
> --
> 2.19.1
>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index 5441e9ffdbb4..e98b0c615f19 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -11,13 +11,6 @@ 
 	cpus {
 		cpu@0 {
 			cpu0-supply = <&vcc>;
-			operating-points = <
-				/* kHz    uV */
-				300000  1012500
-				600000  1200000
-				800000  1325000
-				1000000	1375000
-			>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index f572a477f74c..91154829f86a 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -16,19 +16,66 @@ 
 / {
 	cpus {
 		cpu: cpu@0 {
-			/* OMAP343x/OMAP35xx variants OPP1-5 */
-			operating-points = <
-				/* kHz    uV */
-				125000   975000
-				250000  1075000
-				500000  1200000
-				550000  1270000
-				600000  1350000
-			>;
+			/* OMAP343x/OMAP35xx variants OPP1-6 */
+			operating-points-v2 = <&cpu0_opp_table>;
+
 			clock-latency = <300000>; /* From legacy driver */
 		};
 	};
 
+	/* see Documentation/devicetree/bindings/opp/opp.txt */
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		syscon = <&scm_conf>;
+
+		opp1-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			/*
+			 * we currently only select the max voltage from table
+			 * Table 3-3 of the omap3530 Data sheet (SPRS507F).
+			 * Format is: <target min max>
+			 */
+			opp-microvolt = <975000 975000 975000>;
+			/*
+			 * first value is silicon revision bit mask
+			 * second one 720MHz Device Identification bit mask
+			 */
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp2-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <1075000 1075000 1075000>;
+			opp-supported-hw = <0xffffffff 3>;
+			opp-suspend;
+		};
+
+		opp3-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <1200000 1200000 1200000>;
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp4-550000000 {
+			opp-hz = /bits/ 64 <550000000>;
+			opp-microvolt = <1275000 1275000 1275000>;
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp5-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp6-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1350000 1350000 1350000>;
+			/* only high-speed grade omap3530 devices */
+			opp-supported-hw = <0xffffffff 2>;
+		};
+	};
+
 	ocp@68000000 {
 		omap3_pmx_core2: pinmux@480025d8 {
 			compatible = "ti,omap3-padconf", "pinctrl-single";
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 6fb23ada1f64..44f25b0eb45b 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -19,15 +19,52 @@ 
 	};
 
 	cpus {
-		/* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */
+		/* OMAP3630/OMAP37xx variants OPP50 to OPP130 and OPP1G */
 		cpu: cpu@0 {
-			operating-points = <
-				/* kHz    uV */
-				300000  1012500
-				600000  1200000
-				800000  1325000
-			>;
-			clock-latency = <300000>; /* From legacy driver */
+			operating-points-v2 = <&cpu0_opp_table>;
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+		};
+	};
+
+	/* see Documentation/devicetree/bindings/opp/opp.txt */
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		syscon = <&scm_conf>;
+
+		opp50-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			/*
+			 * we currently only select the max voltage from table
+			 * Table 4-19 of the DM3730 Data sheet (SPRS685B)
+			 * Format is: <target min max>
+			 */
+			opp-microvolt = <1012500 1012500 1012500>;
+			/*
+			 * first value is silicon revision bit mask
+			 * second one is "speed binned" bit mask
+			 */
+			opp-supported-hw = <0xffffffff 3>;
+			opp-suspend;
+		};
+
+		opp100-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1200000 1200000 1200000>;
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp130-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1325000 1325000 1325000>;
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp1g-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1375000 1375000 1375000>;
+			/* only on am/dm37x with speed-binned bit set */
+			opp-supported-hw = <0xffffffff 2>;
 		};
 	};
 
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 03dc4244ab00..68b7fc4225f8 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -86,7 +86,6 @@  static const struct of_device_id whitelist[] __initconst = {
 	{ .compatible = "st-ericsson,u9540", },
 
 	{ .compatible = "ti,omap2", },
-	{ .compatible = "ti,omap3", },
 	{ .compatible = "ti,omap4", },
 	{ .compatible = "ti,omap5", },
 
@@ -132,6 +131,7 @@  static const struct of_device_id blacklist[] __initconst = {
 	{ .compatible = "ti,am33xx", },
 	{ .compatible = "ti,am43", },
 	{ .compatible = "ti,dra7", },
+	{ .compatible = "ti,omap3", },
 
 	{ }
 };