mbox series

[v4,0/2] add one regulator used to power up pcie phy

Message ID 1617004993-29728-1-git-send-email-hongxing.zhu@nxp.com (mailing list archive)
Headers show
Series add one regulator used to power up pcie phy | expand

Message

Hongxing Zhu March 29, 2021, 8:03 a.m. UTC 
Changes:
v3 -> v4
Split the DTS changes to a standalone patch from this patch-set.
And would post to Shawn to take it, after the other two are accepted
by PCIe tree.
Refine the DT binding descriptions refer to Lucas' suggestion.
Use "Regarding" to replace the "Regarding to" in the comments
refer to Krzysztof's suggestion.

v2 -> v3:
Refine the DT binding descriptions, and the condition adjustment in the codes.

v1 -> v2:
Don't use the boolean property to specify the different power supply of PCIe PHY.
Use one regulator as a supply to the PCIe controller node, and the regulator APIs
to get the voltage of it.

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt |  3 +++
drivers/pci/controller/dwc/pci-imx6.c                    | 20 ++++++++++++++++++++
2 files changed, 23 insertions(+)

[PATCH v4 1/2] dt-bindings: imx6q-pcie: add one regulator used to
[PATCH v4 2/2] PCI: imx: clear vreg bypass when pcie vph voltage is