mbox series

[v1,0/2] PCI: Restrict pci transactions after pci suspend

Message ID 1656055682-18817-1-git-send-email-quic_krichai@quicinc.com (mailing list archive)
Headers show
Series PCI: Restrict pci transactions after pci suspend | expand

Message

Krishna Chaitanya Chundru June 24, 2022, 7:28 a.m. UTC 
If the endpoint device state is D0 and irq's are not freed, then
kernel try to mask interrupts by writing in to the vector
table (for MSIX interrupts) and config space (for MSI's).

These transactions are initiated after clocks are getting disabled
as part of PM suspend call. Due to it, these transactions are
resulting in un-clocked access and eventual to crashes.

So added a logic in qcom driver to restrict the unclocked access.
And updated the logic to check the link state before masking
or unmasking the interrupts.

Krishna chaitanya chundru (2):
  PCI: qcom: Add system PM support
  PCI: qcom: Restrict pci transactions after pci suspend

 drivers/pci/controller/dwc/pcie-designware-host.c |  12 ++-
 drivers/pci/controller/dwc/pcie-qcom.c            | 115 +++++++++++++++++++++-
 2 files changed, 123 insertions(+), 4 deletions(-)