mbox series

[v8,0/9] iommu: I/O page faults for SMMUv3

Message ID 20201112125519.3987595-1-jean-philippe@linaro.org (mailing list archive)
Headers show
Series iommu: I/O page faults for SMMUv3 | expand

Message

Jean-Philippe Brucker Nov. 12, 2020, 12:55 p.m. UTC
Add support for stall and PRI to the SMMUv3 driver, along with a common
I/O Page Fault handler.

These patches were last sent as part of v7 of the larger SVA series [1].
Main changes since v7:
* Dropped CONFIG_IOMMU_PAGE_FAULT, reuse CONFIG_IOMMU_SVA_LIB instead.
* Extracted devicetree support into patch 4.
* Added patch 5 for ACPI support.
* Dropped event queue flush on unbind(). Since device drivers must
  complete DMA transactions before calling unbind(), there cannot be any
  pending stalled event.
* A few small fixes.

The series depends on "iommu/sva: Add PASID helpers" [2], since it
provides the function to search an mm_struct by PASID.

Has anyone been testing the PRI patches on hardware? I still only have a
software model to test them, so as much as I'd like to cross this off my
list, we could leave out patches 7-9 for now.

[1] https://lore.kernel.org/linux-iommu/20200519175502.2504091-1-jean-philippe@linaro.org/
[2] https://lore.kernel.org/linux-iommu/20201106155048.997886-1-jean-philippe@linaro.org/

Jean-Philippe Brucker (9):
  iommu: Add a page fault handler
  iommu/arm-smmu-v3: Maintain a SID->device structure
  dt-bindings: document stall property for IOMMU masters
  of/iommu: Support dma-can-stall property
  ACPI/IORT: Enable stall support for platform devices
  iommu/arm-smmu-v3: Add stall support for platform devices
  PCI/ATS: Add PRI stubs
  PCI/ATS: Export PRI functions
  iommu/arm-smmu-v3: Add support for PRI

 drivers/iommu/Makefile                        |   1 +
 .../devicetree/bindings/iommu/iommu.txt       |  18 +
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h   |  69 +-
 drivers/iommu/iommu-sva-lib.h                 |  53 ++
 include/linux/iommu.h                         |   4 +
 include/linux/pci-ats.h                       |   7 +
 drivers/acpi/arm64/iort.c                     |   1 +
 .../iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c   |  52 +-
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c   | 605 +++++++++++++++---
 drivers/iommu/io-pgfault.c                    | 462 +++++++++++++
 drivers/iommu/of_iommu.c                      |   5 +-
 drivers/pci/ats.c                             |   4 +
 12 files changed, 1191 insertions(+), 90 deletions(-)
 create mode 100644 drivers/iommu/io-pgfault.c

Comments

Vivek Kumar Gautam Dec. 3, 2020, 6:52 a.m. UTC | #1
Hi Jean,


On Thu, Nov 12, 2020 at 6:33 PM Jean-Philippe Brucker
<jean-philippe@linaro.org> wrote:
>
> Add support for stall and PRI to the SMMUv3 driver, along with a common
> I/O Page Fault handler.
>
> These patches were last sent as part of v7 of the larger SVA series [1].
> Main changes since v7:
> * Dropped CONFIG_IOMMU_PAGE_FAULT, reuse CONFIG_IOMMU_SVA_LIB instead.
> * Extracted devicetree support into patch 4.
> * Added patch 5 for ACPI support.
> * Dropped event queue flush on unbind(). Since device drivers must
>   complete DMA transactions before calling unbind(), there cannot be any
>   pending stalled event.
> * A few small fixes.
>
> The series depends on "iommu/sva: Add PASID helpers" [2], since it
> provides the function to search an mm_struct by PASID.
>
> Has anyone been testing the PRI patches on hardware? I still only have a
> software model to test them, so as much as I'd like to cross this off my
> list, we could leave out patches 7-9 for now.
>
I have been testing this series for sometime now with a RDN1Edge platform model.
The public model for N1-Edge rd FVP can be found at [A].
With reference software [B] and your kernel branch with smmute [C], I
was able to
test smmute by initiating different DMA transactions. With model logs I was able
to validate ATS and PRI command flows as well.
So I am happy to give my tested-by tag.

Tested-by: Vivek Gautam <vivek.gautam@arm.com>

Best regards
Vivek

[A] https://developer.arm.com/tools-and-software/open-source-software/arm-platforms-software/arm-ecosystem-fvps
[B] https://git.linaro.org/landing-teams/working/arm/arm-reference-platforms.git/about/docs/rdn1edge/user-guide.rst
[C] https://jpbrucker.net/git/linux/log/?h=sva/smmute-2020-11-12

> [1] https://lore.kernel.org/linux-iommu/20200519175502.2504091-1-jean-philippe@linaro.org/
> [2] https://lore.kernel.org/linux-iommu/20201106155048.997886-1-jean-philippe@linaro.org/
>
> Jean-Philippe Brucker (9):
>   iommu: Add a page fault handler
>   iommu/arm-smmu-v3: Maintain a SID->device structure
>   dt-bindings: document stall property for IOMMU masters
>   of/iommu: Support dma-can-stall property
>   ACPI/IORT: Enable stall support for platform devices
>   iommu/arm-smmu-v3: Add stall support for platform devices
>   PCI/ATS: Add PRI stubs
>   PCI/ATS: Export PRI functions
>   iommu/arm-smmu-v3: Add support for PRI
>
>  drivers/iommu/Makefile                        |   1 +
>  .../devicetree/bindings/iommu/iommu.txt       |  18 +
>  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h   |  69 +-
>  drivers/iommu/iommu-sva-lib.h                 |  53 ++
>  include/linux/iommu.h                         |   4 +
>  include/linux/pci-ats.h                       |   7 +
>  drivers/acpi/arm64/iort.c                     |   1 +
>  .../iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c   |  52 +-
>  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c   | 605 +++++++++++++++---
>  drivers/iommu/io-pgfault.c                    | 462 +++++++++++++
>  drivers/iommu/of_iommu.c                      |   5 +-
>  drivers/pci/ats.c                             |   4 +
>  12 files changed, 1191 insertions(+), 90 deletions(-)
>  create mode 100644 drivers/iommu/io-pgfault.c
>
> --
> 2.29.1
>
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu