Show patches with: State = Action Required       |    Archived = No       |   209 patches
« 1 2 3 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v2,3/3] pcie-xilinx: Support reset GPIO for PERST# [v2,1/3] pcie-xilinx: Wait for link-up status during initialization - - - --- 2025-03-25 Mike Looijmans New
[v2,2/3] dt-bindings: PCI: xilinx-pcie: Add reset-gpios for PERST# [v2,1/3] pcie-xilinx: Wait for link-up status during initialization - - - --- 2025-03-25 Mike Looijmans New
[v2,1/3] pcie-xilinx: Wait for link-up status during initialization [v2,1/3] pcie-xilinx: Wait for link-up status during initialization - - - --- 2025-03-25 Mike Looijmans New
[v5,9/9,RESEND] arm64: dts: st: Enable PCIe on the stm32mp257f-ev1 board Add STM32MP25 PCIe drivers - - - --- 2025-03-25 Christian Bruel New
[v5,8/9,RESEND] arm64: dts: st: Add PCIe Endpoint mode on stm32mp251 Add STM32MP25 PCIe drivers - - - --- 2025-03-25 Christian Bruel New
[v5,7/9,RESEND] arm64: dts: st: Add PCIe Rootcomplex mode on stm32mp251 Add STM32MP25 PCIe drivers - - - --- 2025-03-25 Christian Bruel New
[v5,6/9,RESEND] arm64: dts: st: add PCIe pinctrl entries in stm32mp25-pinctrl.dtsi Add STM32MP25 PCIe drivers - - - --- 2025-03-25 Christian Bruel New
[v5,5/9,RESEND] MAINTAINERS: add entry for ST STM32MP25 PCIe drivers Add STM32MP25 PCIe drivers - - - --- 2025-03-25 Christian Bruel New
[v5,4/9,RESEND] PCI: stm32: Add PCIe Endpoint support for STM32MP25 Add STM32MP25 PCIe drivers - - - --- 2025-03-25 Christian Bruel New
[v5,3/9,RESEND] dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings Add STM32MP25 PCIe drivers 1 1 - --- 2025-03-25 Christian Bruel New
[v5,2/9,RESEND] PCI: stm32: Add PCIe host support for STM32MP25 Add STM32MP25 PCIe drivers - - - --- 2025-03-25 Christian Bruel New
[v5,1/9,RESEND] dt-bindings: PCI: Add STM32MP25 PCIe Root Complex bindings Add STM32MP25 PCIe drivers - 1 - --- 2025-03-25 Christian Bruel New
PCI: Add MUCSE vendor ID to pci_ids.h PCI: Add MUCSE vendor ID to pci_ids.h - - - --- 2025-03-25 Yibo Dong New
[v6,6/6] rust: enable `clippy::cast_lossless` lint rust: reduce `as` casts, enable related lints - - - --- 2025-03-24 Tamir Duberstein New
[v6,5/6] rust: enable `clippy::as_underscore` lint rust: reduce `as` casts, enable related lints - 1 - --- 2025-03-24 Tamir Duberstein New
[v6,4/6] rust: enable `clippy::as_ptr_cast_mut` lint rust: reduce `as` casts, enable related lints - 1 - --- 2025-03-24 Tamir Duberstein New
[v6,3/6] rust: enable `clippy::ptr_cast_constness` lint rust: reduce `as` casts, enable related lints - 1 - --- 2025-03-24 Tamir Duberstein New
[v6,2/6] rust: enable `clippy::ptr_as_ptr` lint rust: reduce `as` casts, enable related lints - 1 - --- 2025-03-24 Tamir Duberstein New
[v6,1/6] rust: retain pointer mut-ness in `container_of!` rust: reduce `as` casts, enable related lints - 2 - --- 2025-03-24 Tamir Duberstein New
[5/5] rust: list: remove OFFSET constants rust: list: remove HasListLinks::OFFSET - - - --- 2025-03-24 Tamir Duberstein New
[4/5] rust: list: use consistent self parameter name rust: list: remove HasListLinks::OFFSET - - - --- 2025-03-24 Tamir Duberstein New
[3/5] rust: list: use consistent type parameter names rust: list: remove HasListLinks::OFFSET - - - --- 2025-03-24 Tamir Duberstein New
[2/5] rust: list: simplify macro capture rust: list: remove HasListLinks::OFFSET - - - --- 2025-03-24 Tamir Duberstein New
[1/5] rust: retain pointer mut-ness in `container_of!` rust: list: remove HasListLinks::OFFSET - 2 - --- 2025-03-24 Tamir Duberstein New
[07/10] rust: pci: fix docs related to missing Markdown code spans Untitled series #946955 - - - --- 2025-03-24 Miguel Ojeda New
PCI/IOV: Make the display of vf_device more readble PCI/IOV: Make the display of vf_device more readble - - - --- 2025-03-24 Guixin Liu New
[2/2] dt-bindings: PCI: sifive,fu740-pcie: Fix include placement in DTS example [1/2] dt-bindings: PCI: Correct indentation and style in DTS example - 1 - --- 2025-03-24 Krzysztof Kozlowski kwilczynski New
[1/2] dt-bindings: PCI: Correct indentation and style in DTS example [1/2] dt-bindings: PCI: Correct indentation and style in DTS example - 2 - --- 2025-03-24 Krzysztof Kozlowski kwilczynski New
[v2,3/3] PCI: qcom-ep: Mask PTM_UPDATING interrupt PCI: Add PTM sysfs support - - - --- 2025-03-24 Manivannan Sadhasivam kwilczynski New
[v2,2/3] PCI: dwc: Add sysfs support for PTM context PCI: Add PTM sysfs support - - - --- 2025-03-24 Manivannan Sadhasivam kwilczynski New
[v2,1/3] PCI: Add sysfs support for exposing PTM context PCI: Add PTM sysfs support - - - --- 2025-03-24 Manivannan Sadhasivam kwilczynski New
[6/6] PCI: cadence: Update support for TI J721e boards [1/6] dt-bindings: pci: cadence: Add property "hpa" for PCIe controllers - - - --- 2025-03-24 Manikandan Karunakaran Pillai New
[5/6] PCI: cadence: Add callback functions for Root Port and EP controllers [1/6] dt-bindings: pci: cadence: Add property "hpa" for PCIe controllers - - - --- 2025-03-24 Manikandan Karunakaran Pillai New
[4/6] PCI: cadence: Add support for PCIe Endpoint HPA controller [1/6] dt-bindings: pci: cadence: Add property "hpa" for PCIe controllers - - - --- 2025-03-24 Manikandan Karunakaran Pillai New
[3/6] PCI: cadence: Add architecture information for PCIe controller [1/6] dt-bindings: pci: cadence: Add property "hpa" for PCIe controllers - - - --- 2025-03-24 Manikandan Karunakaran Pillai New
[2/6] PCI: cadence: Add header support for PCIe next generation controllers [1/6] dt-bindings: pci: cadence: Add property "hpa" for PCIe controllers - - - --- 2025-03-24 Manikandan Karunakaran Pillai New
[1/6] dt-bindings: pci: cadence: Add property "hpa" for PCIe controllers [1/6] dt-bindings: pci: cadence: Add property "hpa" for PCIe controllers - - - --- 2025-03-24 Manikandan Karunakaran Pillai New
[v3,2/2] PCI: of_property: Omit 'bus-range' property if no secondary bus PCI: Marvell CN96XX/CN10XXX quirk and bus-range omission - - - --- 2025-03-24 Bo Sun bhelgaas New
[v3,1/2] PCI: Forcefully set the PCI_REASSIGN_ALL_BUS flag for Marvell CN96XX/CN10XXX boards PCI: Marvell CN96XX/CN10XXX quirk and bus-range omission - - - --- 2025-03-24 Bo Sun bhelgaas New
[v1,5/5] PCI: imx6: Save and restore the LUT setting for i.MX95 PCIe Add some enhancements for i.MX95 PCIe - - - --- 2025-03-24 Hongxing Zhu New
[v1,4/5] PCI: imx6: Let i.MX95 PCIe compliance with 8GT/s Receiver Impedance ECN Add some enhancements for i.MX95 PCIe - - - --- 2025-03-24 Hongxing Zhu New
[v1,3/5] PCI: imx6: Workaround i.MX95 PCIe may not exit L23 ready Add some enhancements for i.MX95 PCIe - - - --- 2025-03-24 Hongxing Zhu New
[v1,2/5] PCI: imx6: Toggle the cold reset for i.MX95 PCIe Add some enhancements for i.MX95 PCIe - - - --- 2025-03-24 Hongxing Zhu New
[v1,1/5] PCI: imx6: Start link directly when workaround is not required Add some enhancements for i.MX95 PCIe - - - --- 2025-03-24 Hongxing Zhu New
[3/3] PCI: qcom: Add support for multi-root port PCI: qcom: Move PERST# GPIO & phy retrieval from controller to PCIe bridge node - - - --- 2025-03-22 Krishna Chaitanya Chundru kwilczynski New
[2/3] arm64: qcom: sc7280: Move phy, perst to root port node PCI: qcom: Move PERST# GPIO & phy retrieval from controller to PCIe bridge node - - - --- 2025-03-22 Krishna Chaitanya Chundru kwilczynski New
[1/3] dt-bindings: PCI: qcom: Move phy, wake & reset gpio's to root port PCI: qcom: Move PERST# GPIO & phy retrieval from controller to PCIe bridge node - - - --- 2025-03-22 Krishna Chaitanya Chundru kwilczynski New
[v6,4/6] PCI: qcom: Add support for IPQ5018 Enable IPQ5018 PCI support - 1 - --- 2025-03-21 George Moussalem kwilczynski New
[v6,3/6] dt-bindings: PCI: qcom: Add IPQ5018 SoC Enable IPQ5018 PCI support 1 1 - --- 2025-03-21 George Moussalem kwilczynski New
[v5,2/2] PCI: xilinx-cpm: Add support for PCIe RP PERST# signal Add support for PCIe RP PERST# - - - --- 2025-03-21 Musham, Sai Krishna kwilczynski New
[v5,1/2] dt-bindings: PCI: xilinx-cpm: Add reset-gpios for PCIe RP PERST# Add support for PCIe RP PERST# - - - --- 2025-03-21 Musham, Sai Krishna kwilczynski New
[v5,8/8] PCI/AER: Add sysfs attributes for log ratelimits Rate limit AER logs 1 - - --- 2025-03-21 Jon Pan-Doh bhelgaas New
[v5,7/8] PCI/AER: Add ratelimits to PCI AER Documentation Rate limit AER logs 1 1 - --- 2025-03-21 Jon Pan-Doh bhelgaas New
[v5,6/8] PCI/AER: Introduce ratelimit for error logs Rate limit AER logs 1 - - --- 2025-03-21 Jon Pan-Doh bhelgaas New
[v5,5/8] PCI/AER: Rename struct aer_stats to aer_report Rate limit AER logs 1 1 - --- 2025-03-21 Jon Pan-Doh bhelgaas New
[v5,4/8] PCI/AER: Rename aer_print_port_info() to aer_printrp_info() Rate limit AER logs - - - --- 2025-03-21 Jon Pan-Doh bhelgaas New
[v5,3/8] PCI/AER: Move AER stat collection out of __aer_print_error() Rate limit AER logs 1 - - --- 2025-03-21 Jon Pan-Doh bhelgaas New
[v5,2/8] PCI/AER: Make all pci_print_aer() log levels depend on error type Rate limit AER logs 1 2 - --- 2025-03-21 Jon Pan-Doh bhelgaas New
[v5,1/8] PCI/AER: Check log level once and propagate down Rate limit AER logs 1 2 - --- 2025-03-21 Jon Pan-Doh bhelgaas New
[v6,6/6] drm/xe/pf: Set VF LMEM BAR size PCI: VF resizable BAR - - - --- 2025-03-20 Michał Winiarski bhelgaas New
[v6,5/6] PCI: Allow drivers to control VF BAR size PCI: VF resizable BAR - - - --- 2025-03-20 Michał Winiarski bhelgaas New
[v6,4/6] PCI/IOV: Check that VF BAR fits within the reservation PCI: VF resizable BAR - - - --- 2025-03-20 Michał Winiarski bhelgaas New
[v6,3/6] PCI: Allow IOV resources to be resized in pci_resize_resource() PCI: VF resizable BAR - - - --- 2025-03-20 Michał Winiarski bhelgaas New
[v6,2/6] PCI: Add a helper to convert between VF BAR number and IOV resource PCI: VF resizable BAR 1 - - --- 2025-03-20 Michał Winiarski bhelgaas New
[v6,1/6] PCI/IOV: Restore VF resizable BAR state after reset PCI: VF resizable BAR - 2 - --- 2025-03-20 Michał Winiarski bhelgaas New
[v14,1/4] dt-bindings: PCI: qcom: Add MHI registers for IPQ9574 Add PCIe support for Qualcomm IPQ5332 - 1 - --- 2025-03-17 Varadarajan Narayanan kwilczynski Under Review
[v2,2/2] PCI: starfive: Simplify event doorbell bitmap initialization in pcie-starfive [v2,1/2] PCI: plda: Remove unused IRQ handler and simplify IRQ request logic - - - --- 2025-03-16 Anand Moon kwilczynski New
[v2,1/2] PCI: plda: Remove unused IRQ handler and simplify IRQ request logic [v2,1/2] PCI: plda: Remove unused IRQ handler and simplify IRQ request logic - - - --- 2025-03-16 Anand Moon kwilczynski New
[v8,4/4] PCI: dwc: Add support for configuring lane equalization presets PCI: dwc: Add support for configuring lane equalization presets - - - --- 2025-03-16 Krishna Chaitanya Chundru kwilczynski New
[v8,3/4] PCI: dwc: Update pci->num_lanes to maximum supported link width PCI: dwc: Add support for configuring lane equalization presets - - - --- 2025-03-16 Krishna Chaitanya Chundru kwilczynski New
[v8,2/4] PCI: of: Add of_pci_get_equalization_presets() API PCI: dwc: Add support for configuring lane equalization presets - - - --- 2025-03-16 Krishna Chaitanya Chundru kwilczynski New
[hyperv-next,v6,11/11] PCI: hv: Get vPCI MSI IRQ domain from DeviceTree arm64: hyperv: Support Virtual Trust Level Boot 1 - - --- 2025-03-15 Roman Kisel kwilczynski Under Review
pcie-xilinx: Support reset GPIO and wait for link-up status pcie-xilinx: Support reset GPIO and wait for link-up status - - - --- 2025-03-14 Mike Looijmans kwilczynski New
[v11,10/11] PCI: dwc: Print warning message when cpu_addr_fixup() exists PCI: Use device bus range info to cleanup RC Host/EP pci_fixup_addr() - - - --- 2025-03-13 Frank Li kwilczynski New
[v11,07/11] PCI: dwc: ep: Add parent_bus_addr for outbound window PCI: Use device bus range info to cleanup RC Host/EP pci_fixup_addr() - - - --- 2025-03-13 Frank Li kwilczynski New
[v11,06/11] PCI: dwc: Use devicetree 'ranges' property to get rid of cpu_addr_fixup() callback PCI: Use device bus range info to cleanup RC Host/EP pci_fixup_addr() - - - --- 2025-03-13 Frank Li kwilczynski New
[v11,05/11] PCI: dwc: Add helper dw_pcie_init_parent_bus_offset() PCI: Use device bus range info to cleanup RC Host/EP pci_fixup_addr() - - - --- 2025-03-13 Frank Li kwilczynski New
[v11,04/11] PCI: dwc: Move devm_pci_alloc_host_bridge() to the beginning of dw_pcie_host_init() PCI: Use device bus range info to cleanup RC Host/EP pci_fixup_addr() - - - --- 2025-03-13 Frank Li kwilczynski New
[v11,03/11] PCI: dwc: Move cfg0 setup to dw_pcie_cfg0_setup() PCI: Use device bus range info to cleanup RC Host/EP pci_fixup_addr() - - - --- 2025-03-13 Frank Li kwilczynski New
[v2,09/10] PCI: Add function to convert lnkctl2speed to pci_bus_speed bus: mhi: host: Add support for mhi bus bw - - - --- 2025-03-13 Krishna Chaitanya Chundru kwilczynski New
[v2,08/10] PCI: Export pci_set_target_speed() bus: mhi: host: Add support for mhi bus bw - - - --- 2025-03-13 Krishna Chaitanya Chundru kwilczynski New
[v2,05/10] PCI: qcom: Add support for PCIe bus bw scaling bus: mhi: host: Add support for mhi bus bw - - - --- 2025-03-13 Krishna Chaitanya Chundru kwilczynski New
[v2,04/10] PCI: qcom: Extract core logic from qcom_pcie_icc_opp_update() bus: mhi: host: Add support for mhi bus bw - - - --- 2025-03-13 Krishna Chaitanya Chundru kwilczynski New
[v2,03/10] PCI: dwc: Implement .pre_scale_bus_bw() & .post_scale_bus_bw hook bus: mhi: host: Add support for mhi bus bw - - - --- 2025-03-13 Krishna Chaitanya Chundru kwilczynski New
[v2,02/10] PCI/bwctrl: Add support to scale bandwidth before & after link re-training bus: mhi: host: Add support for mhi bus bw - - - --- 2025-03-13 Krishna Chaitanya Chundru kwilczynski New
[v2,01/10] PCI: update current bus speed as part of pci_bus_add_devices() bus: mhi: host: Add support for mhi bus bw - - - --- 2025-03-13 Krishna Chaitanya Chundru kwilczynski New
[v5,2/2] Add acpi_check_dsm() for PCI _DSM definitions [v5,1/2] Add rev 2 check for PRESERVE_BOOT_CONFIG function - - - --- 2025-03-13 Zhou Shengqing bhelgaas New
[v5,1/2] Add rev 2 check for PRESERVE_BOOT_CONFIG function [v5,1/2] Add rev 2 check for PRESERVE_BOOT_CONFIG function - - - --- 2025-03-13 Zhou Shengqing bhelgaas New
[v2,5/6] PCI: hv: Use hv_hvcall_*() to set up hypercall arguments hyperv: Introduce new way to manage hypercall args 1 - - --- 2025-03-13 Michael Kelley kwilczynski New
Subject: [v2 PATCH 1/1] PCI: of: avoid warning for 4 GiB non-prefetchable windows. Subject: [v2 PATCH 1/1] PCI: of: avoid warning for 4 GiB non-prefetchable windows. - - - --- 2025-03-10 Wannes Bouwen (Nokia) bhelgaas New
[v4,4/8] PCI: qcom: Add QCS8300 PCIe support pci: qcom: Add QCS8300 PCIe support - - - --- 2025-03-10 Ziyue Zhang kwilczynski New
[v4,3/8] dt-bindings: PCI: qcom,pcie-sa8775p: document qcs8300 pci: qcom: Add QCS8300 PCIe support 1 1 - --- 2025-03-10 Ziyue Zhang kwilczynski New
[v5,7/7] PCI: qcom: Add support for ECAM feature PCI: dwc: Add ECAM support with iATU configuration - - - --- 2025-03-09 Krishna Chaitanya Chundru kwilczynski New
[v5,6/7] PCI: dwc: Add ECAM support with iATU configuration PCI: dwc: Add ECAM support with iATU configuration - - - --- 2025-03-09 Krishna Chaitanya Chundru kwilczynski New
[v5,5/7] PCI: dwc: qcom: Switch to dwc ELBI resource mapping PCI: dwc: Add ECAM support with iATU configuration - - - --- 2025-03-09 Krishna Chaitanya Chundru kwilczynski New
[v5,4/7] PCI: dwc: Add support for ELBI resource mapping PCI: dwc: Add ECAM support with iATU configuration - - - --- 2025-03-09 Krishna Chaitanya Chundru kwilczynski New
[v5,3/7] arch: arm64: qcom: sc7280: Remove optional elbi register PCI: dwc: Add ECAM support with iATU configuration - - - --- 2025-03-09 Krishna Chaitanya Chundru kwilczynski New
[v5,2/7] dt-bindings: PCI: qcom,pcie-sc7280: Make elbi register as an optional PCI: dwc: Add ECAM support with iATU configuration - - - --- 2025-03-09 Krishna Chaitanya Chundru kwilczynski New
[v5,1/7] arm64: dts: qcom: sc7280: Increase config size to 256MB for ECAM feature PCI: dwc: Add ECAM support with iATU configuration - 2 - --- 2025-03-09 Krishna Chaitanya Chundru kwilczynski New
[4/4] PCI: j721e: Add support to build as a loadable module [1/4] PCI: cadence: Add support to build pcie-cadence library as a kernel module - - - --- 2025-03-07 Siddharth Vadapalli kwilczynski New
« 1 2 3 »