Show patches with: none      |   52400 patches
« 1 2 3 4 … 523 524 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v9,6/6] rust: enable `clippy::ref_as_ptr` lint rust: reduce `as` casts, enable related lints - 2 - --- 2025-04-16 tamird New
[v9,5/6] rust: enable `clippy::cast_lossless` lint rust: reduce `as` casts, enable related lints - 1 - --- 2025-04-16 tamird New
[v9,4/6] rust: enable `clippy::as_underscore` lint rust: reduce `as` casts, enable related lints - 1 - --- 2025-04-16 tamird New
[v9,3/6] rust: enable `clippy::as_ptr_cast_mut` lint rust: reduce `as` casts, enable related lints - 1 - --- 2025-04-16 tamird New
[v9,2/6] rust: enable `clippy::ptr_cast_constness` lint rust: reduce `as` casts, enable related lints - 1 - --- 2025-04-16 tamird New
[v9,1/6] rust: enable `clippy::ptr_as_ptr` lint rust: reduce `as` casts, enable related lints - 1 - --- 2025-04-16 tamird New
[v2,4/4] PCI: qcom: Add support for resetting the slot due to link down event PCI: Add support for resetting the slots in a platform specific way - - - --- 2025-04-16 Manivannan Sadhasivam New
[v2,3/4] PCI: Add link down handling for host bridges PCI: Add support for resetting the slots in a platform specific way - - - --- 2025-04-16 Manivannan Sadhasivam New
[v2,2/4] PCI/ERR: Add support for resetting the slots in a platform specific way PCI: Add support for resetting the slots in a platform specific way - - - --- 2025-04-16 Manivannan Sadhasivam New
[v2,1/4] PCI/ERR: Remove misleading TODO regarding kernel panic PCI: Add support for resetting the slots in a platform specific way - - - --- 2025-04-16 Manivannan Sadhasivam New
[2/2] net: mana: Allow MANA driver to allocate PCI vector dynamically Allow dyn pci vector allocation of MANA - 1 - --- 2025-04-16 Shradha Gupta New
[1/2] PCI: hv: enable pci_hyperv to allow dynamic vector allocation Allow dyn pci vector allocation of MANA - 2 - --- 2025-04-16 Shradha Gupta New
PCI: dw-rockchip: Configure max payload size on host init PCI: dw-rockchip: Configure max payload size on host init - - - --- 2025-04-16 Hans Zhang New
[RESEND] misc: pci_endpoint_test: Defer IRQ allocation until ioctl(PCITEST_SET_IRQTYPE) [RESEND] misc: pci_endpoint_test: Defer IRQ allocation until ioctl(PCITEST_SET_IRQTYPE) - 1 - --- 2025-04-16 Niklas Cassel kwilczynski New
[RESEND] PCI: rockchip-ep: Mark RK3399 as intx_capable [RESEND] PCI: rockchip-ep: Mark RK3399 as intx_capable - 1 - --- 2025-04-16 Niklas Cassel kwilczynski New
[1/1] x86: Use resource_set_{range,size}() helpers [1/1] x86: Use resource_set_{range,size}() helpers 1 - - --- 2025-04-16 Ilpo Järvinen New
[1/1] PCI: Use PCI_STD_NUM_BARS instead of 6 [1/1] PCI: Use PCI_STD_NUM_BARS instead of 6 - 1 - --- 2025-04-16 Ilpo Järvinen New
[RESEND,v6,7/7] PCI: imx6: Save and restore the LUT setting for i.MX95 PCIe Add some enhancements for i.MX95 PCIe - 2 - --- 2025-04-16 Richard Zhu New
[RESEND,v6,6/7] PCI: imx6: Add PLL clock lock check for i.MX95 PCIe Add some enhancements for i.MX95 PCIe - 1 - --- 2025-04-16 Richard Zhu New
[RESEND,v6,5/7] PCI: imx6: Let i.MX95 PCIe compliance with 8GT/s Receiver Impedance ECN Add some enhancements for i.MX95 PCIe - 2 - --- 2025-04-16 Richard Zhu New
[RESEND,v6,4/7] PCI: imx6: Workaround i.MX95 PCIe may not exit L23 ready Add some enhancements for i.MX95 PCIe - 1 - --- 2025-04-16 Richard Zhu New
[RESEND,v6,3/7] PCI: imx6: Toggle the cold reset for i.MX95 PCIe Add some enhancements for i.MX95 PCIe - 2 - --- 2025-04-16 Richard Zhu New
[RESEND,v6,2/7] PCI: imx6: Skip one dw_pcie_wait_for_link() in workaround link training Add some enhancements for i.MX95 PCIe - 2 - --- 2025-04-16 Richard Zhu New
[RESEND,v6,1/7] PCI: imx6: Start link directly when workaround is not required Add some enhancements for i.MX95 PCIe - 2 - --- 2025-04-16 Richard Zhu New
[v6,7/7] PCI: imx6: Save and restore the LUT setting for i.MX95 PCIe Add some enhancements for i.MX95 PCIe https: //lore.kernel.org/imx/20250314060104.390065-1-hongxing… - 2 - --- 2025-04-16 Richard Zhu New
[v6,6/7] PCI: imx6: Add PLL clock lock check for i.MX95 PCIe Add some enhancements for i.MX95 PCIe https: //lore.kernel.org/imx/20250314060104.390065-1-hongxing… - 1 - --- 2025-04-16 Richard Zhu New
[v6,5/7] PCI: imx6: Let i.MX95 PCIe compliance with 8GT/s Receiver Impedance ECN Add some enhancements for i.MX95 PCIe https: //lore.kernel.org/imx/20250314060104.390065-1-hongxing… - 2 - --- 2025-04-16 Richard Zhu New
[v6,4/7] PCI: imx6: Workaround i.MX95 PCIe may not exit L23 ready Add some enhancements for i.MX95 PCIe https: //lore.kernel.org/imx/20250314060104.390065-1-hongxing… - 1 - --- 2025-04-16 Richard Zhu New
[v6,3/7] PCI: imx6: Toggle the cold reset for i.MX95 PCIe Add some enhancements for i.MX95 PCIe https: //lore.kernel.org/imx/20250314060104.390065-1-hongxing… - 2 - --- 2025-04-16 Richard Zhu New
[v6,2/7] PCI: imx6: Skip one dw_pcie_wait_for_link() in workaround link training Add some enhancements for i.MX95 PCIe https: //lore.kernel.org/imx/20250314060104.390065-1-hongxing… - 2 - --- 2025-04-16 Richard Zhu New
[v6,1/7] PCI: imx6: Start link directly when workaround is not required Add some enhancements for i.MX95 PCIe https: //lore.kernel.org/imx/20250314060104.390065-1-hongxing… - 2 - --- 2025-04-16 Richard Zhu New
[v3,7/7] Drivers: hv: Replace hyperv_pcpu_input/output_arg with hyperv_pcpu_arg hyperv: Introduce new way to manage hypercall args - - - --- 2025-04-15 Michael Kelley New
[v3,6/7] Drivers: hv: Use hv_hvcall_*() to set up hypercall arguments for mshv code hyperv: Introduce new way to manage hypercall args - - - --- 2025-04-15 Michael Kelley New
[v3,5/7] PCI: hv: Use hv_hvcall_*() to set up hypercall arguments hyperv: Introduce new way to manage hypercall args 1 - - --- 2025-04-15 Michael Kelley New
[v3,4/7] Drivers: hv: Use hv_hvcall_*() to set up hypercall arguments hyperv: Introduce new way to manage hypercall args - - - --- 2025-04-15 Michael Kelley New
[v3,3/7] x86/hyperv: Use hv_hvcall_*() to set up hypercall arguments -- part 2 hyperv: Introduce new way to manage hypercall args - 1 - --- 2025-04-15 Michael Kelley New
[v3,2/7] x86/hyperv: Use hv_hvcall_*() to set up hypercall arguments -- part 1 hyperv: Introduce new way to manage hypercall args - 1 - --- 2025-04-15 Michael Kelley New
[v3,1/7] Drivers: hv: Introduce hv_hvcall_*() functions for hypercall arguments hyperv: Introduce new way to manage hypercall args - 1 - --- 2025-04-15 Michael Kelley New
[v4,1/7] dt-bindings: PCI: dwc: rockchip: Add rk3562 support rockchip: Add rk3562 SoC and evb support 1 - - --- 2025-04-15 Kever Yang New
p2pdma: Whitelist the QEMU host bridge for x86_64 p2pdma: Whitelist the QEMU host bridge for x86_64 - 1 - --- 2025-04-15 Stephen Bates New
[hyperv-next,v8,11/11] PCI: hv: Get vPCI MSI IRQ domain from DeviceTree arm64: hyperv: Support Virtual Trust Level Boot 1 - - --- 2025-04-14 Roman Kisel New
[hyperv-next,v8,10/11] ACPI: irq: Introduce acpi_get_gsi_dispatcher() arm64: hyperv: Support Virtual Trust Level Boot 1 1 - --- 2025-04-14 Roman Kisel New
[hyperv-next,v8,09/11] Drivers: hv: vmbus: Introduce hv_get_vmbus_root_device() arm64: hyperv: Support Virtual Trust Level Boot - 1 - --- 2025-04-14 Roman Kisel New
[hyperv-next,v8,08/11] Drivers: hv: vmbus: Get the IRQ number from DeviceTree arm64: hyperv: Support Virtual Trust Level Boot - 1 - --- 2025-04-14 Roman Kisel New
[hyperv-next,v8,07/11] dt-bindings: microsoft,vmbus: Add interrupt and DMA coherence properties arm64: hyperv: Support Virtual Trust Level Boot - 1 - --- 2025-04-14 Roman Kisel New
[hyperv-next,v8,06/11] arm64, x86: hyperv: Report the VTL the system boots in arm64: hyperv: Support Virtual Trust Level Boot - - - --- 2025-04-14 Roman Kisel New
[hyperv-next,v8,05/11] arm64: hyperv: Initialize the Virtual Trust Level field arm64: hyperv: Support Virtual Trust Level Boot - 1 - --- 2025-04-14 Roman Kisel New
[hyperv-next,v8,04/11] Drivers: hv: Provide arch-neutral implementation of get_vtl() arm64: hyperv: Support Virtual Trust Level Boot - 2 - --- 2025-04-14 Roman Kisel New
[hyperv-next,v8,03/11] Drivers: hv: Enable VTL mode for arm64 arm64: hyperv: Support Virtual Trust Level Boot - - - --- 2025-04-14 Roman Kisel New
[hyperv-next,v8,02/11] arm64: hyperv: Use SMCCC to detect hypervisor presence arm64: hyperv: Support Virtual Trust Level Boot - - - --- 2025-04-14 Roman Kisel New
[hyperv-next,v8,01/11] arm64: kvm, smccc: Introduce and use API for getting hypervisor UUID arm64: hyperv: Support Virtual Trust Level Boot - - - --- 2025-04-14 Roman Kisel New
dt-bindings: PCI: Convert Marvell EBU to schema dt-bindings: PCI: Convert Marvell EBU to schema - - - --- 2025-04-14 Rob Herring New
dt-bindings: PCI: Convert marvell,armada8k-pcie to schema dt-bindings: PCI: Convert marvell,armada8k-pcie to schema - - - --- 2025-04-14 Rob Herring New
Revert "PCI: Avoid reset when disabled via sysfs" Revert "PCI: Avoid reset when disabled via sysfs" - 1 - --- 2025-04-14 Alex Williamson bhelgaas Accepted
[v18,15/15] arm64: dts: imx95: Add msi-map for pci-ep device PCI: EP: Add RC-to-EP doorbell with platform MSI controller - - - --- 2025-04-14 Frank Li New
[v18,14/15] pci: imx6: Add LUT setting for MSI/IOMMU in Endpoint mode PCI: EP: Add RC-to-EP doorbell with platform MSI controller - - - --- 2025-04-14 Frank Li New
[v18,13/15] pci: imx6: Add helper function imx_pcie_add_lut_by_rid() PCI: EP: Add RC-to-EP doorbell with platform MSI controller - - - --- 2025-04-14 Frank Li New
[v18,12/15] selftests: pci_endpoint: Add doorbell test case PCI: EP: Add RC-to-EP doorbell with platform MSI controller - - - --- 2025-04-14 Frank Li New
[v18,11/15] misc: pci_endpoint_test: Add doorbell test case PCI: EP: Add RC-to-EP doorbell with platform MSI controller - - 1 --- 2025-04-14 Frank Li New
[v18,10/15] PCI: endpoint: pci-epf-test: Add doorbell test support PCI: EP: Add RC-to-EP doorbell with platform MSI controller - - 1 --- 2025-04-14 Frank Li New
[v18,09/15] PCI: endpoint: Add pci_epf_align_inbound_addr() helper for address alignment PCI: EP: Add RC-to-EP doorbell with platform MSI controller - - - --- 2025-04-14 Frank Li New
[v18,08/15] PCI: endpoint: pci-ep-msi: Add MSI address/data pair mutable check PCI: EP: Add RC-to-EP doorbell with platform MSI controller - - - --- 2025-04-14 Frank Li New
[v18,07/15] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller PCI: EP: Add RC-to-EP doorbell with platform MSI controller - - 1 --- 2025-04-14 Frank Li New
[v18,06/15] PCI: endpoint: Set ID and of_node for function driver PCI: EP: Add RC-to-EP doorbell with platform MSI controller - - - --- 2025-04-14 Frank Li New
[v18,05/15] irqchip/gic-v3-its: Add support for device tree msi-map and msi-mask PCI: EP: Add RC-to-EP doorbell with platform MSI controller - - - --- 2025-04-14 Frank Li New
[v18,04/15] dt-bindings: PCI: pci-ep: Add support for iommu-map and msi-map PCI: EP: Add RC-to-EP doorbell with platform MSI controller - 1 - --- 2025-04-14 Frank Li New
[v18,03/15] irqchip/gic-v3-its: Set IRQ_DOMAIN_FLAG_MSI_IMMUTABLE for ITS PCI: EP: Add RC-to-EP doorbell with platform MSI controller - - - --- 2025-04-14 Frank Li New
[v18,02/15] irqdomain: Add IRQ_DOMAIN_FLAG_MSI_IMMUTABLE and irq_domain_is_msi_immutable() PCI: EP: Add RC-to-EP doorbell with platform MSI controller - - - --- 2025-04-14 Frank Li New
[v18,01/15] platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all() PCI: EP: Add RC-to-EP doorbell with platform MSI controller 1 - - --- 2025-04-14 Frank Li New
[v9,1/2] dt-bindings: PCI: dw: rockchip: Add rk3576 support rockchip: Add rk3576 pcie dts nodes - 2 - --- 2025-04-14 Kever Yang New
PCI: hotplug: Drop superfluous #include directives PCI: hotplug: Drop superfluous #include directives - - - --- 2025-04-14 Lukas Wunner New
PCI: ls-gen4: Use to_delayed_work() PCI: ls-gen4: Use to_delayed_work() - - - --- 2025-04-14 Chen Ni New
[v2,3/3] PCI: qcom: Add support for multi-root port PCI: qcom: Move PERST# GPIO & phy retrieval from controller to PCIe bridge node - - - --- 2025-04-14 Krishna Chaitanya Chundru New
[v2,2/3] arm64: qcom: sc7280: Move phy, perst to root port node PCI: qcom: Move PERST# GPIO & phy retrieval from controller to PCIe bridge node - - - --- 2025-04-14 Krishna Chaitanya Chundru New
[v2,1/3] dt-bindings: PCI: qcom: Move phy, wake & reset gpio's to root port PCI: qcom: Move PERST# GPIO & phy retrieval from controller to PCIe bridge node - - - --- 2025-04-14 Krishna Chaitanya Chundru New
[RESEND,v7,2/2] PCI: xilinx-cpm: Add support for PCIe RP PERST# signal Add support for PCIe RP PERST# - - - --- 2025-04-14 Musham, Sai Krishna New
[RESEND,v7,1/2] dt-bindings: PCI: xilinx-cpm: Add `cpm_crx` and `cpm5nc_fw_attr` properties Add support for PCIe RP PERST# - - - --- 2025-04-14 Musham, Sai Krishna New
[LINUX,v7,2/2] PCI: xilinx-cpm: Add support for PCIe RP PERST# signal Add support for PCIe RP PERST# - - - --- 2025-04-14 Musham, Sai Krishna Superseded
[LINUX,v7,1/2] dt-bindings: PCI: xilinx-cpm: Add `cpm_crx` and `cpm5nc_fw_attr` properties Add support for PCIe RP PERST# - - - --- 2025-04-14 Musham, Sai Krishna Superseded
[v3,2/2] PCI: dw-rockchip: Move rockchip_pcie_ep_hide_broken_ats_cap_rk3588() to .init() [v3,1/2] PCI: dw-rockchip: Enable L0S capability - - 1 --- 2025-04-14 Shawn Lin New
[v3,1/2] PCI: dw-rockchip: Enable L0S capability [v3,1/2] PCI: dw-rockchip: Enable L0S capability - 1 - --- 2025-04-14 Shawn Lin New
[v2] PCI: fix the printed delay amount in info print [v2] PCI: fix the printed delay amount in info print - 4 - --- 2025-04-14 Wilfred Mallawa bhelgaas New
[v2,9/9] rust: dma: require a bound device Implement "Bound" device context - - - --- 2025-04-13 Danilo Krummrich bhelgaas Handled Elsewhere
[v2,8/9] rust: devres: require a bound device Implement "Bound" device context - - - --- 2025-04-13 Danilo Krummrich bhelgaas Handled Elsewhere
[v2,7/9] rust: pci: move iomap_region() to impl Device<Bound> Implement "Bound" device context - 1 - --- 2025-04-13 Danilo Krummrich bhelgaas Handled Elsewhere
[v2,6/9] rust: device: implement Bound device context Implement "Bound" device context - 1 - --- 2025-04-13 Danilo Krummrich bhelgaas Handled Elsewhere
[v2,5/9] rust: pci: preserve device context in AsRef Implement "Bound" device context - 1 - --- 2025-04-13 Danilo Krummrich bhelgaas Handled Elsewhere
[v2,4/9] rust: platform: preserve device context in AsRef Implement "Bound" device context - 1 - --- 2025-04-13 Danilo Krummrich bhelgaas Handled Elsewhere
[v2,3/9] rust: device: implement device context for Device Implement "Bound" device context - 1 - --- 2025-04-13 Danilo Krummrich bhelgaas Handled Elsewhere
[v2,2/9] rust: device: implement impl_device_context_into_aref! Implement "Bound" device context - 1 - --- 2025-04-13 Danilo Krummrich bhelgaas Handled Elsewhere
[v2,1/9] rust: device: implement impl_device_context_deref! Implement "Bound" device context - 1 - --- 2025-04-13 Danilo Krummrich bhelgaas Handled Elsewhere
PCI: fix the printed delay amount in info print PCI: fix the printed delay amount in info print - 1 - --- 2025-04-12 Wilfred Mallawa bhelgaas Superseded
[v5,9/9] arm64: defconfig: Enable TC9563 PWRCTL driver PCI: Enable Power and configure the TC9563 PCIe switch - - - --- 2025-04-12 Krishna Chaitanya Chundru New
[v5,8/9] PCI: pwrctrl: Add power control driver for tc9563 PCI: Enable Power and configure the TC9563 PCIe switch - 2 - --- 2025-04-12 Krishna Chaitanya Chundru New
[v5,7/9] PCI: PCI: Add pcie_link_is_active() to determine if the PCIe link is active PCI: Enable Power and configure the TC9563 PCIe switch - 1 - --- 2025-04-12 Krishna Chaitanya Chundru New
[v5,6/9] PCI: qcom: Add support for host_stop_link() & host_start_link() PCI: Enable Power and configure the TC9563 PCIe switch - - - --- 2025-04-12 Krishna Chaitanya Chundru New
[v5,5/9] PCI: dwc: Implement .start_link(), .stop_link() hooks PCI: Enable Power and configure the TC9563 PCIe switch - - - --- 2025-04-12 Krishna Chaitanya Chundru New
[v5,4/9] PCI: dwc: Add host_start_link() & host_start_link() hooks for dwc glue drivers PCI: Enable Power and configure the TC9563 PCIe switch - - - --- 2025-04-12 Krishna Chaitanya Chundru New
[v5,3/9] PCI: Add new start_link() & stop_link function ops PCI: Enable Power and configure the TC9563 PCIe switch - - - --- 2025-04-12 Krishna Chaitanya Chundru New
[v5,2/9] arm64: dts: qcom: qcs6490-rb3gen2: Add TC9563 PCIe switch node PCI: Enable Power and configure the TC9563 PCIe switch 1 2 - --- 2025-04-12 Krishna Chaitanya Chundru New
« 1 2 3 4 … 523 524 »