diff mbox

[2/5] Make current and maximum bus speeds part of the PCI core

Message ID 1260709895-9510-2-git-send-email-matthew@wil.cx (mailing list archive)
State Accepted, archived
Headers show

Commit Message

Matthew Wilcox Dec. 13, 2009, 1:11 p.m. UTC
None
diff mbox

Patch

diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index 4dd7114..efa9f2d 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -332,8 +332,6 @@  int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot)
 	slot->hotplug_slot->info->attention_status = 0;
 	slot->hotplug_slot->info->latch_status = acpiphp_get_latch_status(slot->acpi_slot);
 	slot->hotplug_slot->info->adapter_status = acpiphp_get_adapter_status(slot->acpi_slot);
-	slot->hotplug_slot->info->max_bus_speed = PCI_SPEED_UNKNOWN;
-	slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN;
 
 	acpiphp_slot->slot = slot;
 	snprintf(name, SLOT_NAME_SIZE, "%llu", slot->acpi_slot->sun);
diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h
index 9c6a9fd..d8ffc73 100644
--- a/drivers/pci/hotplug/cpqphp.h
+++ b/drivers/pci/hotplug/cpqphp.h
@@ -310,8 +310,6 @@  struct controller {
 	u8 first_slot;
 	u8 add_support;
 	u8 push_flag;
-	enum pci_bus_speed speed;
-	enum pci_bus_speed speed_capability;
 	u8 push_button;			/* 0 = no pushbutton, 1 = pushbutton present */
 	u8 slot_switch_type;		/* 0 = no switch, 1 = switch present */
 	u8 defeature_PHP;		/* 0 = PHP not supported, 1 = PHP supported */
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index 075b4f4..f184d1d 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -583,30 +583,6 @@  static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
 	return 0;
 }
 
-static int get_max_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
-	struct slot *slot = hotplug_slot->private;
-	struct controller *ctrl = slot->ctrl;
-
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
-
-	*value = ctrl->speed_capability;
-
-	return 0;
-}
-
-static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
-	struct slot *slot = hotplug_slot->private;
-	struct controller *ctrl = slot->ctrl;
-
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
-
-	*value = ctrl->speed;
-
-	return 0;
-}
-
 static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
 	.set_attention_status =	set_attention_status,
 	.enable_slot =		process_SI,
@@ -616,8 +592,6 @@  static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
 	.get_attention_status =	get_attention_status,
 	.get_latch_status =	get_latch_status,
 	.get_adapter_status =	get_adapter_status,
-	.get_max_bus_speed =	get_max_bus_speed,
-	.get_cur_bus_speed =	get_cur_bus_speed,
 };
 
 #define SLOT_NAME_SIZE 10
@@ -629,6 +603,7 @@  static int ctrl_slot_setup(struct controller *ctrl,
 	struct slot *slot;
 	struct hotplug_slot *hotplug_slot;
 	struct hotplug_slot_info *hotplug_slot_info;
+	struct pci_bus *bus = ctrl->pci_bus;
 	u8 number_of_slots;
 	u8 slot_device;
 	u8 slot_number;
@@ -694,7 +669,7 @@  static int ctrl_slot_setup(struct controller *ctrl,
 			slot->capabilities |= PCISLOT_64_BIT_SUPPORTED;
 		if (is_slot66mhz(slot))
 			slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED;
-		if (ctrl->speed == PCI_SPEED_66MHz)
+		if (bus->cur_bus_speed == PCI_SPEED_66MHz)
 			slot->capabilities |= PCISLOT_66_MHZ_OPERATION;
 
 		ctrl_slot =
@@ -844,6 +819,7 @@  static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	u32 rc;
 	struct controller *ctrl;
 	struct pci_func *func;
+	struct pci_bus *bus;
 	int err;
 
 	err = pci_enable_device(pdev);
@@ -852,6 +828,7 @@  static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			pci_name(pdev), err);
 		return err;
 	}
+	bus = pdev->subordinate;
 
 	/* Need to read VID early b/c it's used to differentiate CPQ and INTC
 	 * discovery
@@ -929,22 +906,22 @@  static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			pci_read_config_byte(pdev, 0x41, &bus_cap);
 			if (bus_cap & 0x80) {
 				dbg("bus max supports 133MHz PCI-X\n");
-				ctrl->speed_capability = PCI_SPEED_133MHz_PCIX;
+				bus->max_bus_speed = PCI_SPEED_133MHz_PCIX;
 				break;
 			}
 			if (bus_cap & 0x40) {
 				dbg("bus max supports 100MHz PCI-X\n");
-				ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
+				bus->max_bus_speed = PCI_SPEED_100MHz_PCIX;
 				break;
 			}
 			if (bus_cap & 20) {
 				dbg("bus max supports 66MHz PCI-X\n");
-				ctrl->speed_capability = PCI_SPEED_66MHz_PCIX;
+				bus->max_bus_speed = PCI_SPEED_66MHz_PCIX;
 				break;
 			}
 			if (bus_cap & 10) {
 				dbg("bus max supports 66MHz PCI\n");
-				ctrl->speed_capability = PCI_SPEED_66MHz;
+				bus->max_bus_speed = PCI_SPEED_66MHz;
 				break;
 			}
 
@@ -955,7 +932,7 @@  static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		case PCI_SUB_HPC_ID:
 			/* Original 6500/7000 implementation */
 			ctrl->slot_switch_type = 1;
-			ctrl->speed_capability = PCI_SPEED_33MHz;
+			bus->max_bus_speed = PCI_SPEED_33MHz;
 			ctrl->push_button = 0;
 			ctrl->pci_config_space = 1;
 			ctrl->defeature_PHP = 1;
@@ -966,7 +943,7 @@  static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			/* First Pushbutton implementation */
 			ctrl->push_flag = 1;
 			ctrl->slot_switch_type = 1;
-			ctrl->speed_capability = PCI_SPEED_33MHz;
+			bus->max_bus_speed = PCI_SPEED_33MHz;
 			ctrl->push_button = 1;
 			ctrl->pci_config_space = 1;
 			ctrl->defeature_PHP = 1;
@@ -976,7 +953,7 @@  static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		case PCI_SUB_HPC_ID_INTC:
 			/* Third party (6500/7000) */
 			ctrl->slot_switch_type = 1;
-			ctrl->speed_capability = PCI_SPEED_33MHz;
+			bus->max_bus_speed = PCI_SPEED_33MHz;
 			ctrl->push_button = 0;
 			ctrl->pci_config_space = 1;
 			ctrl->defeature_PHP = 1;
@@ -987,7 +964,7 @@  static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			/* First 66 Mhz implementation */
 			ctrl->push_flag = 1;
 			ctrl->slot_switch_type = 1;
-			ctrl->speed_capability = PCI_SPEED_66MHz;
+			bus->max_bus_speed = PCI_SPEED_66MHz;
 			ctrl->push_button = 1;
 			ctrl->pci_config_space = 1;
 			ctrl->defeature_PHP = 1;
@@ -998,7 +975,7 @@  static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			/* First PCI-X implementation, 100MHz */
 			ctrl->push_flag = 1;
 			ctrl->slot_switch_type = 1;
-			ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
+			bus->max_bus_speed = PCI_SPEED_100MHz_PCIX;
 			ctrl->push_button = 1;
 			ctrl->pci_config_space = 1;
 			ctrl->defeature_PHP = 1;
@@ -1015,9 +992,9 @@  static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	case PCI_VENDOR_ID_INTEL:
 		/* Check for speed capability (0=33, 1=66) */
 		if (subsystem_deviceid & 0x0001)
-			ctrl->speed_capability = PCI_SPEED_66MHz;
+			bus->max_bus_speed = PCI_SPEED_66MHz;
 		else
-			ctrl->speed_capability = PCI_SPEED_33MHz;
+			bus->max_bus_speed = PCI_SPEED_33MHz;
 
 		/* Check for push button */
 		if (subsystem_deviceid & 0x0002)
@@ -1079,7 +1056,7 @@  static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 					pdev->bus->number);
 
 	dbg("Hotplug controller capabilities:\n");
-	dbg("    speed_capability       %d\n", ctrl->speed_capability);
+	dbg("    speed_capability       %d\n", bus->max_bus_speed);
 	dbg("    slot_switch_type       %s\n", ctrl->slot_switch_type ?
 					"switch present" : "no switch");
 	dbg("    defeature_PHP          %s\n", ctrl->defeature_PHP ?
@@ -1142,7 +1119,7 @@  static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	/* Check for 66Mhz operation */
-	ctrl->speed = get_controller_speed(ctrl);
+	bus->cur_bus_speed = get_controller_speed(ctrl);
 
 
 	/********************************************************
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index 0ff689a..e43908d 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -1130,12 +1130,13 @@  static int is_bridge(struct pci_func * func)
 static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_slot)
 {
 	struct slot *slot;
+	struct pci_bus *bus = ctrl->pci_bus;
 	u8 reg;
 	u8 slot_power = readb(ctrl->hpc_reg + SLOT_POWER);
 	u16 reg16;
 	u32 leds = readl(ctrl->hpc_reg + LED_CONTROL);
 
-	if (ctrl->speed == adapter_speed)
+	if (bus->cur_bus_speed == adapter_speed)
 		return 0;
 
 	/* We don't allow freq/mode changes if we find another adapter running
@@ -1152,7 +1153,7 @@  static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
 		 * lower speed/mode, we allow the new adapter to function at
 		 * this rate if supported
 		 */
-		if (ctrl->speed < adapter_speed)
+		if (bus->cur_bus_speed < adapter_speed)
 			return 0;
 
 		return 1;
@@ -1161,20 +1162,20 @@  static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
 	/* If the controller doesn't support freq/mode changes and the
 	 * controller is running at a higher mode, we bail
 	 */
-	if ((ctrl->speed > adapter_speed) && (!ctrl->pcix_speed_capability))
+	if ((bus->cur_bus_speed > adapter_speed) && (!ctrl->pcix_speed_capability))
 		return 1;
 
 	/* But we allow the adapter to run at a lower rate if possible */
-	if ((ctrl->speed < adapter_speed) && (!ctrl->pcix_speed_capability))
+	if ((bus->cur_bus_speed < adapter_speed) && (!ctrl->pcix_speed_capability))
 		return 0;
 
 	/* We try to set the max speed supported by both the adapter and
 	 * controller
 	 */
-	if (ctrl->speed_capability < adapter_speed) {
-		if (ctrl->speed == ctrl->speed_capability)
+	if (bus->max_bus_speed < adapter_speed) {
+		if (bus->cur_bus_speed == bus->max_bus_speed)
 			return 0;
-		adapter_speed = ctrl->speed_capability;
+		adapter_speed = bus->max_bus_speed;
 	}
 
 	writel(0x0L, ctrl->hpc_reg + LED_CONTROL);
@@ -1229,8 +1230,8 @@  static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
 	pci_write_config_byte(ctrl->pci_dev, 0x43, reg);
 
 	/* Only if mode change...*/
-	if (((ctrl->speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
-		((ctrl->speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz))) 
+	if (((bus->cur_bus_speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
+		((bus->cur_bus_speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz))) 
 			set_SOGO(ctrl);
 
 	wait_for_ctrl_irq(ctrl);
@@ -1243,7 +1244,7 @@  static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
 	set_SOGO(ctrl);
 	wait_for_ctrl_irq(ctrl);
 
-	ctrl->speed = adapter_speed;
+	bus->cur_bus_speed = adapter_speed;
 	slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
 
 	info("Successfully changed frequency/mode for adapter in slot %d\n",
@@ -1269,6 +1270,7 @@  static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
  */
 static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
 {
+	struct pci_bus *bus = ctrl->pci_bus;
 	u8 hp_slot;
 	u8 temp_byte;
 	u8 adapter_speed;
@@ -1309,7 +1311,7 @@  static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
 		wait_for_ctrl_irq (ctrl);
 
 		adapter_speed = get_adapter_speed(ctrl, hp_slot);
-		if (ctrl->speed != adapter_speed)
+		if (bus->cur_bus_speed != adapter_speed)
 			if (set_controller_speed(ctrl, adapter_speed, hp_slot))
 				rc = WRONG_BUS_FREQUENCY;
 
@@ -1426,6 +1428,7 @@  static u32 board_added(struct pci_func *func, struct controller *ctrl)
 	u32 temp_register = 0xFFFFFFFF;
 	u32 rc = 0;
 	struct pci_func *new_slot = NULL;
+	struct pci_bus *bus = ctrl->pci_bus;
 	struct slot *p_slot;
 	struct resource_lists res_lists;
 
@@ -1456,7 +1459,7 @@  static u32 board_added(struct pci_func *func, struct controller *ctrl)
 	wait_for_ctrl_irq (ctrl);
 
 	adapter_speed = get_adapter_speed(ctrl, hp_slot);
-	if (ctrl->speed != adapter_speed)
+	if (bus->cur_bus_speed != adapter_speed)
 		if (set_controller_speed(ctrl, adapter_speed, hp_slot))
 			rc = WRONG_BUS_FREQUENCY;
 
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index 7485ffd..d934dd4 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -395,89 +395,40 @@  static int get_adapter_present(struct hotplug_slot *hotplug_slot, u8 * value)
 	return rc;
 }
 
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
+static int get_max_bus_speed(struct slot *slot)
 {
-	int rc = -ENODEV;
-	struct slot *pslot;
+	int rc;
 	u8 mode = 0;
+	enum pci_bus_speed speed;
+	struct pci_bus *bus = slot->hotplug_slot->pci_slot->bus;
 
-	debug("%s - Entry hotplug_slot[%p] pvalue[%p]\n", __func__,
-		hotplug_slot, value);
+	debug("%s - Entry slot[%p]\n", __func__, slot);
 
 	ibmphp_lock_operations();
-
-	if (hotplug_slot) {
-		pslot = hotplug_slot->private;
-		if (pslot) {
-			rc = 0;
-			mode = pslot->supported_bus_mode;
-			*value = pslot->supported_speed; 
-			switch (*value) {
-			case BUS_SPEED_33:
-				break;
-			case BUS_SPEED_66:
-				if (mode == BUS_MODE_PCIX) 
-					*value += 0x01;
-				break;
-			case BUS_SPEED_100:
-			case BUS_SPEED_133:
-				*value = pslot->supported_speed + 0x01;
-				break;
-			default:
-				/* Note (will need to change): there would be soon 256, 512 also */
-				rc = -ENODEV;
-			}
-		}
-	}
-
+	mode = slot->supported_bus_mode;
+	speed = slot->supported_speed; 
 	ibmphp_unlock_operations();
-	debug("%s - Exit rc[%d] value[%x]\n", __func__, rc, *value);
-	return rc;
-}
 
-static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
-	int rc = -ENODEV;
-	struct slot *pslot;
-	u8 mode = 0;
-
-	debug("%s - Entry hotplug_slot[%p] pvalue[%p]\n", __func__,
-		hotplug_slot, value);
-
-	ibmphp_lock_operations();
-
-	if (hotplug_slot) {
-		pslot = hotplug_slot->private;
-		if (pslot) {
-			rc = get_cur_bus_info(&pslot);
-			if (!rc) {
-				mode = pslot->bus_on->current_bus_mode;
-				*value = pslot->bus_on->current_speed;
-				switch (*value) {
-				case BUS_SPEED_33:
-					break;
-				case BUS_SPEED_66:
-					if (mode == BUS_MODE_PCIX) 
-						*value += 0x01;
-					else if (mode == BUS_MODE_PCI)
-						;
-					else
-						*value = PCI_SPEED_UNKNOWN;
-					break;
-				case BUS_SPEED_100:
-				case BUS_SPEED_133:
-					*value += 0x01;
-					break;
-				default:
-					/* Note of change: there would also be 256, 512 soon */
-					rc = -ENODEV;
-				}
-			}
-		}
+	switch (speed) {
+	case BUS_SPEED_33:
+		break;
+	case BUS_SPEED_66:
+		if (mode == BUS_MODE_PCIX) 
+			speed += 0x01;
+		break;
+	case BUS_SPEED_100:
+	case BUS_SPEED_133:
+		speed += 0x01;
+		break;
+	default:
+		/* Note (will need to change): there would be soon 256, 512 also */
+		rc = -ENODEV;
 	}
 
-	ibmphp_unlock_operations();
-	debug("%s - Exit rc[%d] value[%x]\n", __func__, rc, *value);
+	if (!rc)
+		bus->max_bus_speed = speed;
+
+	debug("%s - Exit rc[%d] speed[%x]\n", __func__, rc, speed);
 	return rc;
 }
 
@@ -572,6 +523,7 @@  static int __init init_ops(void)
 		if (slot_cur->bus_on->current_speed == 0xFF) 
 			if (get_cur_bus_info(&slot_cur)) 
 				return -1;
+		get_max_bus_speed(slot_cur);
 
 		if (slot_cur->ctrl->options == 0xFF)
 			if (get_hpc_options(slot_cur, &slot_cur->ctrl->options))
@@ -655,6 +607,7 @@  static int validate(struct slot *slot_cur, int opn)
 int ibmphp_update_slot_info(struct slot *slot_cur)
 {
 	struct hotplug_slot_info *info;
+	struct pci_bus *bus = slot_cur->hotplug_slot->pci_slot->bus;
 	int rc;
 	u8 bus_speed;
 	u8 mode;
@@ -700,8 +653,7 @@  int ibmphp_update_slot_info(struct slot *slot_cur)
 			bus_speed = PCI_SPEED_UNKNOWN;
 	}
 
-	info->cur_bus_speed = bus_speed;
-	info->max_bus_speed = slot_cur->hotplug_slot->info->max_bus_speed;
+	bus->cur_bus_speed = bus_speed;
 	// To do: bus_names 
 	
 	rc = pci_hp_change_slot_info(slot_cur->hotplug_slot, info);
@@ -1326,8 +1278,6 @@  struct hotplug_slot_ops ibmphp_hotplug_slot_ops = {
 	.get_attention_status =		get_attention_status,
 	.get_latch_status =		get_latch_status,
 	.get_adapter_status =		get_adapter_present,
-	.get_max_bus_speed =		get_max_bus_speed,
-	.get_cur_bus_speed =		get_cur_bus_speed,
 /*	.get_max_adapter_speed =	get_max_adapter_speed,
 	.get_bus_name_status =		get_bus_name,
 */
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index 38183a5..728b119 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -64,32 +64,6 @@  static int debug;
 static LIST_HEAD(pci_hotplug_slot_list);
 static DEFINE_MUTEX(pci_hp_mutex);
 
-/* these strings match up with the values in pci_bus_speed */
-static char *pci_bus_speed_strings[] = {
-	"33 MHz PCI",		/* 0x00 */
-	"66 MHz PCI",		/* 0x01 */
-	"66 MHz PCI-X",		/* 0x02 */
-	"100 MHz PCI-X",	/* 0x03 */
-	"133 MHz PCI-X",	/* 0x04 */
-	NULL,			/* 0x05 */
-	NULL,			/* 0x06 */
-	NULL,			/* 0x07 */
-	NULL,			/* 0x08 */
-	"66 MHz PCI-X 266",	/* 0x09 */
-	"100 MHz PCI-X 266",	/* 0x0a */
-	"133 MHz PCI-X 266",	/* 0x0b */
-	NULL,			/* 0x0c */
-	NULL,			/* 0x0d */
-	NULL,			/* 0x0e */
-	NULL,			/* 0x0f */
-	NULL,			/* 0x10 */
-	"66 MHz PCI-X 533",	/* 0x11 */
-	"100 MHz PCI-X 533",	/* 0x12 */
-	"133 MHz PCI-X 533",	/* 0x13 */
-	"2.5 GT/s PCIe",	/* 0x14 */
-	"5.0 GT/s PCIe",	/* 0x15 */
-};
-
 #ifdef CONFIG_HOTPLUG_PCI_CPCI
 extern int cpci_hotplug_init(int debug);
 extern void cpci_hotplug_exit(void);
@@ -118,8 +92,6 @@  GET_STATUS(power_status, u8)
 GET_STATUS(attention_status, u8)
 GET_STATUS(latch_status, u8)
 GET_STATUS(adapter_status, u8)
-GET_STATUS(max_bus_speed, enum pci_bus_speed)
-GET_STATUS(cur_bus_speed, enum pci_bus_speed)
 
 static ssize_t power_read_file(struct pci_slot *slot, char *buf)
 {
@@ -263,60 +235,6 @@  static struct pci_slot_attribute hotplug_slot_attr_presence = {
 	.show = presence_read_file,
 };
 
-static char *unknown_speed = "Unknown bus speed";
-
-static ssize_t max_bus_speed_read_file(struct pci_slot *slot, char *buf)
-{
-	char *speed_string;
-	int retval;
-	enum pci_bus_speed value;
-	
-	retval = get_max_bus_speed(slot->hotplug, &value);
-	if (retval)
-		goto exit;
-
-	if (value == PCI_SPEED_UNKNOWN)
-		speed_string = unknown_speed;
-	else
-		speed_string = pci_bus_speed_strings[value];
-	
-	retval = sprintf (buf, "%s\n", speed_string);
-
-exit:
-	return retval;
-}
-
-static struct pci_slot_attribute hotplug_slot_attr_max_bus_speed = {
-	.attr = {.name = "max_bus_speed", .mode = S_IFREG | S_IRUGO},
-	.show = max_bus_speed_read_file,
-};
-
-static ssize_t cur_bus_speed_read_file(struct pci_slot *slot, char *buf)
-{
-	char *speed_string;
-	int retval;
-	enum pci_bus_speed value;
-
-	retval = get_cur_bus_speed(slot->hotplug, &value);
-	if (retval)
-		goto exit;
-
-	if (value == PCI_SPEED_UNKNOWN)
-		speed_string = unknown_speed;
-	else
-		speed_string = pci_bus_speed_strings[value];
-	
-	retval = sprintf (buf, "%s\n", speed_string);
-
-exit:
-	return retval;
-}
-
-static struct pci_slot_attribute hotplug_slot_attr_cur_bus_speed = {
-	.attr = {.name = "cur_bus_speed", .mode = S_IFREG | S_IRUGO},
-	.show = cur_bus_speed_read_file,
-};
-
 static ssize_t test_write_file(struct pci_slot *pci_slot, const char *buf,
 		size_t count)
 {
@@ -391,26 +309,6 @@  static bool has_adapter_file(struct pci_slot *pci_slot)
 	return false;
 }
 
-static bool has_max_bus_speed_file(struct pci_slot *pci_slot)
-{
-	struct hotplug_slot *slot = pci_slot->hotplug;
-	if ((!slot) || (!slot->ops))
-		return false;
-	if (slot->ops->get_max_bus_speed)
-		return true;
-	return false;
-}
-
-static bool has_cur_bus_speed_file(struct pci_slot *pci_slot)
-{
-	struct hotplug_slot *slot = pci_slot->hotplug;
-	if ((!slot) || (!slot->ops))
-		return false;
-	if (slot->ops->get_cur_bus_speed)
-		return true;
-	return false;
-}
-
 static bool has_test_file(struct pci_slot *pci_slot)
 {
 	struct hotplug_slot *slot = pci_slot->hotplug;
@@ -456,20 +354,6 @@  static int fs_add_slot(struct pci_slot *slot)
 			goto exit_adapter;
 	}
 
-	if (has_max_bus_speed_file(slot)) {
-		retval = sysfs_create_file(&slot->kobj,
-					&hotplug_slot_attr_max_bus_speed.attr);
-		if (retval)
-			goto exit_max_speed;
-	}
-
-	if (has_cur_bus_speed_file(slot)) {
-		retval = sysfs_create_file(&slot->kobj,
-					&hotplug_slot_attr_cur_bus_speed.attr);
-		if (retval)
-			goto exit_cur_speed;
-	}
-
 	if (has_test_file(slot)) {
 		retval = sysfs_create_file(&slot->kobj,
 					   &hotplug_slot_attr_test.attr);
@@ -480,14 +364,6 @@  static int fs_add_slot(struct pci_slot *slot)
 	goto exit;
 
 exit_test:
-	if (has_cur_bus_speed_file(slot))
-		sysfs_remove_file(&slot->kobj,
-				  &hotplug_slot_attr_cur_bus_speed.attr);
-exit_cur_speed:
-	if (has_max_bus_speed_file(slot))
-		sysfs_remove_file(&slot->kobj,
-				  &hotplug_slot_attr_max_bus_speed.attr);
-exit_max_speed:
 	if (has_adapter_file(slot))
 		sysfs_remove_file(&slot->kobj,
 				  &hotplug_slot_attr_presence.attr);
@@ -523,14 +399,6 @@  static void fs_remove_slot(struct pci_slot *slot)
 		sysfs_remove_file(&slot->kobj,
 				  &hotplug_slot_attr_presence.attr);
 
-	if (has_max_bus_speed_file(slot))
-		sysfs_remove_file(&slot->kobj,
-				  &hotplug_slot_attr_max_bus_speed.attr);
-
-	if (has_cur_bus_speed_file(slot))
-		sysfs_remove_file(&slot->kobj,
-				  &hotplug_slot_attr_cur_bus_speed.attr);
-
 	if (has_test_file(slot))
 		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_test.attr);
 
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 5674b20..920f820 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -69,8 +69,6 @@  static int get_power_status	(struct hotplug_slot *slot, u8 *value);
 static int get_attention_status	(struct hotplug_slot *slot, u8 *value);
 static int get_latch_status	(struct hotplug_slot *slot, u8 *value);
 static int get_adapter_status	(struct hotplug_slot *slot, u8 *value);
-static int get_max_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
-static int get_cur_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
 
 /**
  * release_slot - free up the memory used by a slot
@@ -113,8 +111,6 @@  static int init_slot(struct controller *ctrl)
 	ops->disable_slot = disable_slot;
 	ops->get_power_status = get_power_status;
 	ops->get_adapter_status = get_adapter_status;
-	ops->get_max_bus_speed = get_max_bus_speed;
-	ops->get_cur_bus_speed = get_cur_bus_speed;
 	if (MRL_SENS(ctrl))
 		ops->get_latch_status = get_latch_status;
 	if (ATTN_LED(ctrl)) {
@@ -227,27 +223,6 @@  static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
 	return pciehp_get_adapter_status(slot, value);
 }
 
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot,
-				enum pci_bus_speed *value)
-{
-	struct slot *slot = hotplug_slot->private;
-
-	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
-		 __func__, slot_name(slot));
-
-	return pciehp_get_max_link_speed(slot, value);
-}
-
-static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
-	struct slot *slot = hotplug_slot->private;
-
-	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
-		 __func__, slot_name(slot));
-
-	return pciehp_get_cur_link_speed(slot, value);
-}
-
 static int pciehp_probe(struct pcie_device *dev)
 {
 	int rc;
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 6744ca1..40b48f5 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -492,6 +492,7 @@  int pciehp_power_on_slot(struct slot * slot)
 	u16 slot_cmd;
 	u16 cmd_mask;
 	u16 slot_status;
+	u16 lnk_status;
 	int retval = 0;
 
 	/* Clear sticky power-fault bit from previous power failures */
@@ -523,6 +524,14 @@  int pciehp_power_on_slot(struct slot * slot)
 	ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
 		 pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd);
 
+	retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
+	if (retval) {
+		ctrl_err(ctrl, "%s: Cannot read LNKSTA register\n",
+				__func__);
+		return retval;
+	}
+	pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status);
+
 	return retval;
 }
 
@@ -610,37 +619,6 @@  static irqreturn_t pcie_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-int pciehp_get_max_link_speed(struct slot *slot, enum pci_bus_speed *value)
-{
-	struct controller *ctrl = slot->ctrl;
-	enum pci_bus_speed lnk_speed;
-	u32	lnk_cap;
-	int retval = 0;
-
-	retval = pciehp_readl(ctrl, PCI_EXP_LNKCAP, &lnk_cap);
-	if (retval) {
-		ctrl_err(ctrl, "%s: Cannot read LNKCAP register\n", __func__);
-		return retval;
-	}
-
-	switch (lnk_cap & 0x000F) {
-	case 1:
-		lnk_speed = PCIE_SPEED_2_5GT;
-		break;
-	case 2:
-		lnk_speed = PCIE_SPEED_5_0GT;
-		break;
-	default:
-		lnk_speed = PCI_SPEED_UNKNOWN;
-		break;
-	}
-
-	*value = lnk_speed;
-	ctrl_dbg(ctrl, "Max link speed = %d\n", lnk_speed);
-
-	return retval;
-}
-
 int pciehp_get_max_lnk_width(struct slot *slot,
 				 enum pcie_link_width *value)
 {
@@ -691,38 +669,6 @@  int pciehp_get_max_lnk_width(struct slot *slot,
 	return retval;
 }
 
-int pciehp_get_cur_link_speed(struct slot *slot, enum pci_bus_speed *value)
-{
-	struct controller *ctrl = slot->ctrl;
-	enum pci_bus_speed lnk_speed = PCI_SPEED_UNKNOWN;
-	int retval = 0;
-	u16 lnk_status;
-
-	retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
-	if (retval) {
-		ctrl_err(ctrl, "%s: Cannot read LNKSTATUS register\n",
-			 __func__);
-		return retval;
-	}
-
-	switch (lnk_status & PCI_EXP_LNKSTA_CLS) {
-	case 1:
-		lnk_speed = PCIE_SPEED_2_5GT;
-		break;
-	case 2:
-		lnk_speed = PCIE_SPEED_5_0GT;
-		break;
-	default:
-		lnk_speed = PCI_SPEED_UNKNOWN;
-		break;
-	}
-
-	*value = lnk_speed;
-	ctrl_dbg(ctrl, "Current link speed = %d\n", lnk_speed);
-
-	return retval;
-}
-
 int pciehp_get_cur_lnk_width(struct slot *slot,
 				 enum pcie_link_width *value)
 {
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index c159223..b14e5e6 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -130,10 +130,9 @@  static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 * value)
 	return 0;
 }
 
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
+static enum pci_bus_speed get_max_bus_speed(struct slot *slot)
 {
-	struct slot *slot = (struct slot *)hotplug_slot->private;
-
+	enum pci_bus_speed speed;
 	switch (slot->type) {
 	case 1:
 	case 2:
@@ -141,30 +140,30 @@  static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_spe
 	case 4:
 	case 5:
 	case 6:
-		*value = PCI_SPEED_33MHz;	/* speed for case 1-6 */
+		speed = PCI_SPEED_33MHz;	/* speed for case 1-6 */
 		break;
 	case 7:
 	case 8:
-		*value = PCI_SPEED_66MHz;
+		speed = PCI_SPEED_66MHz;
 		break;
 	case 11:
 	case 14:
-		*value = PCI_SPEED_66MHz_PCIX;
+		speed = PCI_SPEED_66MHz_PCIX;
 		break;
 	case 12:
 	case 15:
-		*value = PCI_SPEED_100MHz_PCIX;
+		speed = PCI_SPEED_100MHz_PCIX;
 		break;
 	case 13:
 	case 16:
-		*value = PCI_SPEED_133MHz_PCIX;
+		speed = PCI_SPEED_133MHz_PCIX;
 		break;
 	default:
-		*value = PCI_SPEED_UNKNOWN;
+		speed = PCI_SPEED_UNKNOWN;
 		break;
-
 	}
-	return 0;
+
+	return speed;
 }
 
 static int get_children_props(struct device_node *dn, const int **drc_indexes,
@@ -408,6 +407,8 @@  static int enable_slot(struct hotplug_slot *hotplug_slot)
 		slot->state = NOT_VALID;
 		return -EINVAL;
 	}
+
+	slot->bus->max_bus_speed = get_max_bus_speed(slot);
 	return 0;
 }
 
diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
index bd588eb..0dfbc37 100644
--- a/drivers/pci/hotplug/shpchp.h
+++ b/drivers/pci/hotplug/shpchp.h
@@ -333,8 +333,6 @@  struct hpc_ops {
 	int (*set_attention_status)(struct slot *slot, u8 status);
 	int (*get_latch_status)(struct slot *slot, u8 *status);
 	int (*get_adapter_status)(struct slot *slot, u8 *status);
-	int (*get_max_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
-	int (*get_cur_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
 	int (*get_adapter_speed)(struct slot *slot, enum pci_bus_speed *speed);
 	int (*get_mode1_ECC_cap)(struct slot *slot, u8 *mode);
 	int (*get_prog_int)(struct slot *slot, u8 *prog_int);
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index 8a520a3..a506229 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -65,8 +65,6 @@  static int get_power_status	(struct hotplug_slot *slot, u8 *value);
 static int get_attention_status	(struct hotplug_slot *slot, u8 *value);
 static int get_latch_status	(struct hotplug_slot *slot, u8 *value);
 static int get_adapter_status	(struct hotplug_slot *slot, u8 *value);
-static int get_max_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
-static int get_cur_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
 
 static struct hotplug_slot_ops shpchp_hotplug_slot_ops = {
 	.set_attention_status =	set_attention_status,
@@ -76,8 +74,6 @@  static struct hotplug_slot_ops shpchp_hotplug_slot_ops = {
 	.get_attention_status =	get_attention_status,
 	.get_latch_status =	get_latch_status,
 	.get_adapter_status =	get_adapter_status,
-	.get_max_bus_speed =	get_max_bus_speed,
-	.get_cur_bus_speed =	get_cur_bus_speed,
 };
 
 /**
@@ -279,37 +275,6 @@  static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value)
 	return 0;
 }
 
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot,
-				enum pci_bus_speed *value)
-{
-	struct slot *slot = get_slot(hotplug_slot);
-	int retval;
-
-	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
-		 __func__, slot_name(slot));
-
-	retval = slot->hpc_ops->get_max_bus_speed(slot, value);
-	if (retval < 0)
-		*value = PCI_SPEED_UNKNOWN;
-
-	return 0;
-}
-
-static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
-	struct slot *slot = get_slot(hotplug_slot);
-	int retval;
-
-	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
-		 __func__, slot_name(slot));
-
-	retval = slot->hpc_ops->get_cur_bus_speed(slot, value);
-	if (retval < 0)
-		*value = PCI_SPEED_UNKNOWN;
-
-	return 0;
-}
-
 static int is_shpc_capable(struct pci_dev *dev)
 {
 	if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device ==
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index b8ab279..179b1c1 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -285,17 +285,8 @@  static int board_added(struct slot *p_slot)
 		return WRONG_BUS_FREQUENCY;
 	}
 
-	rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bsp);
-	if (rc) {
-		ctrl_err(ctrl, "Can't get bus operation speed\n");
-		return WRONG_BUS_FREQUENCY;
-	}
-
-	rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &msp);
-	if (rc) {
-		ctrl_err(ctrl, "Can't get max bus operation speed\n");
-		msp = bsp;
-	}
+	bsp = ctrl->pci_dev->bus->cur_bus_speed;
+	msp = ctrl->pci_dev->bus->max_bus_speed;
 
 	/* Check if there are other slots or devices on the same bus */
 	if (!list_empty(&ctrl->pci_dev->subordinate->devices))
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 86dc398..5f5e8d2 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -660,6 +660,75 @@  static int hpc_slot_disable(struct slot * slot)
 	return retval;
 }
 
+static int shpc_get_cur_bus_speed(struct controller *ctrl)
+{
+	int retval = 0;
+	struct pci_bus *bus = ctrl->pci_dev->subordinate;
+	enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
+	u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG);
+	u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
+	u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7);
+
+	if ((pi == 1) && (speed_mode > 4)) {
+		retval = -ENODEV;
+		goto out;
+	}
+
+	switch (speed_mode) {
+	case 0x0:
+		bus_speed = PCI_SPEED_33MHz;
+		break;
+	case 0x1:
+		bus_speed = PCI_SPEED_66MHz;
+		break;
+	case 0x2:
+		bus_speed = PCI_SPEED_66MHz_PCIX;
+		break;
+	case 0x3:
+		bus_speed = PCI_SPEED_100MHz_PCIX;
+		break;
+	case 0x4:
+		bus_speed = PCI_SPEED_133MHz_PCIX;
+		break;
+	case 0x5:
+		bus_speed = PCI_SPEED_66MHz_PCIX_ECC;
+		break;
+	case 0x6:
+		bus_speed = PCI_SPEED_100MHz_PCIX_ECC;
+		break;
+	case 0x7:
+		bus_speed = PCI_SPEED_133MHz_PCIX_ECC;
+		break;
+	case 0x8:
+		bus_speed = PCI_SPEED_66MHz_PCIX_266;
+		break;
+	case 0x9:
+		bus_speed = PCI_SPEED_100MHz_PCIX_266;
+		break;
+	case 0xa:
+		bus_speed = PCI_SPEED_133MHz_PCIX_266;
+		break;
+	case 0xb:
+		bus_speed = PCI_SPEED_66MHz_PCIX_533;
+		break;
+	case 0xc:
+		bus_speed = PCI_SPEED_100MHz_PCIX_533;
+		break;
+	case 0xd:
+		bus_speed = PCI_SPEED_133MHz_PCIX_533;
+		break;
+	default:
+		retval = -ENODEV;
+		break;
+	}
+
+ out:
+	bus->cur_bus_speed = bus_speed;
+	dbg("Current bus speed = %d\n", bus_speed);
+	return retval;
+}
+
+
 static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value)
 {
 	int retval;
@@ -720,6 +789,8 @@  static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value)
 	retval = shpc_write_cmd(slot, 0, cmd);
 	if (retval)
 		ctrl_err(ctrl, "%s: Write command failed!\n", __func__);
+	else
+		shpc_get_cur_bus_speed(ctrl);
 
 	return retval;
 }
@@ -803,10 +874,10 @@  static irqreturn_t shpc_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
+static int shpc_get_max_bus_speed(struct controller *ctrl)
 {
 	int retval = 0;
-	struct controller *ctrl = slot->ctrl;
+	struct pci_bus *bus = ctrl->pci_dev->subordinate;
 	enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
 	u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
 	u32 slot_avail1 = shpc_readl(ctrl, SLOT_AVAIL1);
@@ -842,79 +913,12 @@  static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
 			retval = -ENODEV;
 	}
 
-	*value = bus_speed;
+	bus->max_bus_speed = bus_speed;
 	ctrl_dbg(ctrl, "Max bus speed = %d\n", bus_speed);
 
 	return retval;
 }
 
-static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value)
-{
-	int retval = 0;
-	struct controller *ctrl = slot->ctrl;
-	enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
-	u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG);
-	u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
-	u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7);
-
-	if ((pi == 1) && (speed_mode > 4)) {
-		*value = PCI_SPEED_UNKNOWN;
-		return -ENODEV;
-	}
-
-	switch (speed_mode) {
-	case 0x0:
-		*value = PCI_SPEED_33MHz;
-		break;
-	case 0x1:
-		*value = PCI_SPEED_66MHz;
-		break;
-	case 0x2:
-		*value = PCI_SPEED_66MHz_PCIX;
-		break;
-	case 0x3:
-		*value = PCI_SPEED_100MHz_PCIX;
-		break;
-	case 0x4:
-		*value = PCI_SPEED_133MHz_PCIX;
-		break;
-	case 0x5:
-		*value = PCI_SPEED_66MHz_PCIX_ECC;
-		break;
-	case 0x6:
-		*value = PCI_SPEED_100MHz_PCIX_ECC;
-		break;
-	case 0x7:
-		*value = PCI_SPEED_133MHz_PCIX_ECC;
-		break;
-	case 0x8:
-		*value = PCI_SPEED_66MHz_PCIX_266;
-		break;
-	case 0x9:
-		*value = PCI_SPEED_100MHz_PCIX_266;
-		break;
-	case 0xa:
-		*value = PCI_SPEED_133MHz_PCIX_266;
-		break;
-	case 0xb:
-		*value = PCI_SPEED_66MHz_PCIX_533;
-		break;
-	case 0xc:
-		*value = PCI_SPEED_100MHz_PCIX_533;
-		break;
-	case 0xd:
-		*value = PCI_SPEED_133MHz_PCIX_533;
-		break;
-	default:
-		*value = PCI_SPEED_UNKNOWN;
-		retval = -ENODEV;
-		break;
-	}
-
-	ctrl_dbg(ctrl, "Current bus speed = %d\n", bus_speed);
-	return retval;
-}
-
 static struct hpc_ops shpchp_hpc_ops = {
 	.power_on_slot			= hpc_power_on_slot,
 	.slot_enable			= hpc_slot_enable,
@@ -926,8 +930,6 @@  static struct hpc_ops shpchp_hpc_ops = {
 	.get_latch_status		= hpc_get_latch_status,
 	.get_adapter_status		= hpc_get_adapter_status,
 
-	.get_max_bus_speed		= hpc_get_max_bus_speed,
-	.get_cur_bus_speed		= hpc_get_cur_bus_speed,
 	.get_adapter_speed		= hpc_get_adapter_speed,
 	.get_mode1_ECC_cap		= hpc_get_mode1_ECC_cap,
 	.get_prog_int			= hpc_get_prog_int,
@@ -1086,6 +1088,9 @@  int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
 	}
 	ctrl_dbg(ctrl, "HPC at %s irq=%x\n", pci_name(pdev), pdev->irq);
 
+	shpc_get_max_bus_speed(ctrl);
+	shpc_get_cur_bus_speed(ctrl);
+
 	/*
 	 * If this is the first controller to be initialized,
 	 * initialize the shpchpd work queue
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 663d400..58eab10 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -387,10 +387,37 @@  static struct pci_bus * pci_alloc_bus(void)
 		INIT_LIST_HEAD(&b->children);
 		INIT_LIST_HEAD(&b->devices);
 		INIT_LIST_HEAD(&b->slots);
+		b->max_bus_speed = PCI_SPEED_UNKNOWN;
+		b->cur_bus_speed = PCI_SPEED_UNKNOWN;
 	}
 	return b;
 }
 
+static unsigned char pcie_link_speed[] = {
+	PCI_SPEED_UNKNOWN,		/* 0 */
+	PCIE_SPEED_2_5GT,		/* 1 */
+	PCIE_SPEED_5_0GT,		/* 2 */
+	PCI_SPEED_UNKNOWN,		/* 3 */
+	PCI_SPEED_UNKNOWN,		/* 4 */
+	PCI_SPEED_UNKNOWN,		/* 5 */
+	PCI_SPEED_UNKNOWN,		/* 6 */
+	PCI_SPEED_UNKNOWN,		/* 7 */
+	PCI_SPEED_UNKNOWN,		/* 8 */
+	PCI_SPEED_UNKNOWN,		/* 9 */
+	PCI_SPEED_UNKNOWN,		/* A */
+	PCI_SPEED_UNKNOWN,		/* B */
+	PCI_SPEED_UNKNOWN,		/* C */
+	PCI_SPEED_UNKNOWN,		/* D */
+	PCI_SPEED_UNKNOWN,		/* E */
+	PCI_SPEED_UNKNOWN		/* F */
+};
+
+void pcie_update_link_speed(struct pci_bus *bus, u16 linksta)
+{
+	bus->cur_bus_speed = pcie_link_speed[linksta & 0xf];
+}
+EXPORT_SYMBOL_GPL(pcie_update_link_speed);
+
 static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
 					   struct pci_dev *bridge, int busnr)
 {
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index 8c02b6c..6f6b8d2 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -47,6 +47,54 @@  static ssize_t address_read_file(struct pci_slot *slot, char *buf)
 				slot->number);
 }
 
+/* these strings match up with the values in pci_bus_speed */
+static char *pci_bus_speed_strings[] = {
+	"33 MHz PCI",		/* 0x00 */
+	"66 MHz PCI",		/* 0x01 */
+	"66 MHz PCI-X", 	/* 0x02 */
+	"100 MHz PCI-X",	/* 0x03 */
+	"133 MHz PCI-X",	/* 0x04 */
+	NULL,			/* 0x05 */
+	NULL,			/* 0x06 */
+	NULL,			/* 0x07 */
+	NULL,			/* 0x08 */
+	"66 MHz PCI-X 266",	/* 0x09 */
+	"100 MHz PCI-X 266",	/* 0x0a */
+	"133 MHz PCI-X 266",	/* 0x0b */
+	NULL,			/* 0x0c */
+	NULL,			/* 0x0d */
+	NULL,			/* 0x0e */
+	NULL,			/* 0x0f */
+	NULL,			/* 0x10 */
+	"66 MHz PCI-X 533",	/* 0x11 */
+	"100 MHz PCI-X 533",	/* 0x12 */
+	"133 MHz PCI-X 533",	/* 0x13 */
+	"2.5 GT/s PCIe",	/* 0x14 */
+	"5.0 GT/s PCIe",	/* 0x15 */
+};
+
+static ssize_t bus_speed_read(enum pci_bus_speed speed, char *buf)
+{
+	const char *speed_string;
+
+	if (speed < ARRAY_SIZE(pci_bus_speed_strings))
+		speed_string = pci_bus_speed_strings[speed];
+	else
+		speed_string = "Unknown";
+
+	return sprintf(buf, "%s\n", speed_string);
+}
+
+static ssize_t max_speed_read_file(struct pci_slot *slot, char *buf)
+{
+	return bus_speed_read(slot->bus->max_bus_speed, buf);
+}
+
+static ssize_t cur_speed_read_file(struct pci_slot *slot, char *buf)
+{
+	return bus_speed_read(slot->bus->cur_bus_speed, buf);
+}
+
 static void pci_slot_release(struct kobject *kobj)
 {
 	struct pci_dev *dev;
@@ -66,9 +114,15 @@  static void pci_slot_release(struct kobject *kobj)
 
 static struct pci_slot_attribute pci_slot_attr_address =
 	__ATTR(address, (S_IFREG | S_IRUGO), address_read_file, NULL);
+static struct pci_slot_attribute pci_slot_attr_max_speed =
+	__ATTR(max_bus_speed, (S_IFREG | S_IRUGO), max_speed_read_file, NULL);
+static struct pci_slot_attribute pci_slot_attr_cur_speed =
+	__ATTR(cur_bus_speed, (S_IFREG | S_IRUGO), cur_speed_read_file, NULL);
 
 static struct attribute *pci_slot_default_attrs[] = {
 	&pci_slot_attr_address.attr,
+	&pci_slot_attr_max_speed.attr,
+	&pci_slot_attr_cur_speed.attr,
 	NULL,
 };
 
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 7d2f4ce..3f03c4c 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -379,6 +379,8 @@  struct pci_bus {
 	unsigned char	primary;	/* number of primary bridge */
 	unsigned char	secondary;	/* number of secondary bridge */
 	unsigned char	subordinate;	/* max number of subordinate buses */
+	unsigned char	max_bus_speed;	/* enum pci_bus_speed */
+	unsigned char	cur_bus_speed;	/* enum pci_bus_speed */
 
 	char		name[48];
 
@@ -606,6 +608,7 @@  struct pci_bus *pci_create_bus(struct device *parent, int bus,
 			       struct pci_ops *ops, void *sysdata);
 struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev,
 				int busnr);
+void pcie_update_link_speed(struct pci_bus *bus, u16 link_status);
 struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr,
 				 const char *name,
 				 struct hotplug_slot *hotplug);
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index 56251ac..5d09cba 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -63,12 +63,6 @@  enum pcie_link_width {
  * @get_adapter_status: Called to get see if an adapter is present in the slot or not.
  *	If this field is NULL, the value passed in the struct hotplug_slot_info
  *	will be used when this value is requested by a user.
- * @get_max_bus_speed: Called to get the max bus speed for a slot.
- *	If this field is NULL, the value passed in the struct hotplug_slot_info
- *	will be used when this value is requested by a user.
- * @get_cur_bus_speed: Called to get the current bus speed for a slot.
- *	If this field is NULL, the value passed in the struct hotplug_slot_info
- *	will be used when this value is requested by a user.
  *
  * The table of function pointers that is passed to the hotplug pci core by a
  * hotplug pci driver.  These functions are called by the hotplug pci core when
@@ -86,17 +80,14 @@  struct hotplug_slot_ops {
 	int (*get_attention_status)	(struct hotplug_slot *slot, u8 *value);
 	int (*get_latch_status)		(struct hotplug_slot *slot, u8 *value);
 	int (*get_adapter_status)	(struct hotplug_slot *slot, u8 *value);
-	int (*get_max_bus_speed)	(struct hotplug_slot *slot, enum pci_bus_speed *value);
-	int (*get_cur_bus_speed)	(struct hotplug_slot *slot, enum pci_bus_speed *value);
 };
 
 /**
  * struct hotplug_slot_info - used to notify the hotplug pci core of the state of the slot
- * @power: if power is enabled or not (1/0)
+ * @power_status: if power is enabled or not (1/0)
  * @attention_status: if the attention light is enabled or not (1/0)
  * @latch_status: if the latch (if any) is open or closed (1/0)
- * @adapter_present: if there is a pci board present in the slot or not (1/0)
- * @address: (domain << 16 | bus << 8 | dev)
+ * @adapter_status: if there is a pci board present in the slot or not (1/0)
  *
  * Used to notify the hotplug pci core of the status of a specific slot.
  */
@@ -105,8 +96,6 @@  struct hotplug_slot_info {
 	u8	attention_status;
 	u8	latch_status;
 	u8	adapter_status;
-	enum pci_bus_speed	max_bus_speed;
-	enum pci_bus_speed	cur_bus_speed;
 };
 
 /**