diff mbox

aerdrv: Enable AER completion notice

Message ID 1342725552-14407-1-git-send-email-lance.ortiz@hp.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Lance Ortiz July 19, 2012, 7:19 p.m. UTC
When an AER event occurs not all of the print notifications are at the
same log level.  This can cause an incomplete AER log from the users
point of view when monitoring the console output.

The completion message in do_recovery() is currently set to KERN_DEBUG
(log level 7) while the starting message in aer_port_info() uses
KERN_INFO(log level 6). The completion message should be set to
KERN_INFO so it is consistent with the starting message in the log.

The message has also been re-worded to make it more clear.  This patch 
will enable the AER log on the console output to be book-ended by a
clear and consistent starting and completion message.

Signed-off-by: Lance Ortiz <lance.ortiz@hp.com>
---
 drivers/pci/pcie/aer/aerdrv_core.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

Comments

Bjorn Helgaas July 30, 2012, 5:37 p.m. UTC | #1
On Thu, Jul 19, 2012 at 1:19 PM, Lance Ortiz <lance.ortiz@hp.com> wrote:
> When an AER event occurs not all of the print notifications are at the
> same log level.  This can cause an incomplete AER log from the users
> point of view when monitoring the console output.
>
> The completion message in do_recovery() is currently set to KERN_DEBUG
> (log level 7) while the starting message in aer_port_info() uses
> KERN_INFO(log level 6). The completion message should be set to
> KERN_INFO so it is consistent with the starting message in the log.
>
> The message has also been re-worded to make it more clear.  This patch
> will enable the AER log on the console output to be book-ended by a
> clear and consistent starting and completion message.
>
> Signed-off-by: Lance Ortiz <lance.ortiz@hp.com>
> ---
>  drivers/pci/pcie/aer/aerdrv_core.c |    8 ++++----
>  1 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
> index 0ca0535..164bab5 100644
> --- a/drivers/pci/pcie/aer/aerdrv_core.c
> +++ b/drivers/pci/pcie/aer/aerdrv_core.c
> @@ -540,14 +540,14 @@ static void do_recovery(struct pci_dev *dev, int severity)
>                                 "resume",
>                                 report_resume);
>
> -       dev_printk(KERN_DEBUG, &dev->dev,
> -               "AER driver successfully recovered\n");
> +       dev_printk(KERN_INFO, &dev->dev,
> +               "AER: Device recovery successful\n");
>         return;
>
>  failed:
>         /* TODO: Should kernel panic here? */
> -       dev_printk(KERN_DEBUG, &dev->dev,
> -               "AER driver didn't recover\n");
> +       dev_printk(KERN_INFO, &dev->dev,
> +               "AER: Device recovery failed\n");
>  }
>
>  /**

I applied this with minor tweaks (using dev_info() rather than
dev_printk(KERN_INFO)).

It won't appear in my "next" branch until I rebuild it after the merge
window closes.

Thanks!
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index 0ca0535..164bab5 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -540,14 +540,14 @@  static void do_recovery(struct pci_dev *dev, int severity)
 				"resume",
 				report_resume);
 
-	dev_printk(KERN_DEBUG, &dev->dev,
-		"AER driver successfully recovered\n");
+	dev_printk(KERN_INFO, &dev->dev,
+		"AER: Device recovery successful\n");
 	return;
 
 failed:
 	/* TODO: Should kernel panic here? */
-	dev_printk(KERN_DEBUG, &dev->dev,
-		"AER driver didn't recover\n");
+	dev_printk(KERN_INFO, &dev->dev,
+		"AER: Device recovery failed\n");
 }
 
 /**