diff mbox

[1/2] PCI: introduce root bridge hotplug safe interfaces to walk root buses

Message ID 1347552010-6718-1-git-send-email-jiang.liu@huawei.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Jiang Liu Sept. 13, 2012, 4 p.m. UTC
This patch introduces two root bridge hotplug safe interfaces to walk
all root buses. Function pci_get_root_buses() takes a snopshot of the
pci_root_buses list and holds a reference count to each root buses.
pci_{get|put}_root_buses are used to replace hotplug unsafe interface
pci_find_next_bus().

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
---
Hi Bjorn,
	How about this solution? We could avoid the global lock by
taking a snapshot of the pci_root_buses list.
	These two patches just pass basic compilation tests on x86:)
	Regards!
	Gerry
---
 arch/ia64/hp/common/sba_iommu.c   |   10 +++++++---
 arch/ia64/sn/kernel/io_common.c   |   12 ++++++-----
 arch/sparc/kernel/pci.c           |   15 ++++++++------
 arch/x86/pci/common.c             |   10 ++++++++--
 drivers/edac/i7core_edac.c        |    9 ++++++---
 drivers/gpu/drm/drm_fops.c        |   10 +++++++---
 drivers/pci/hotplug/sgi_hotplug.c |    7 ++++++-
 drivers/pci/pci-sysfs.c           |    9 ++++++---
 drivers/pci/search.c              |   40 +++++++++++++++++++++++++++++++++++++
 include/linux/pci.h               |   11 ++++++++++
 10 files changed, 107 insertions(+), 26 deletions(-)

Comments

Bjorn Helgaas Sept. 13, 2012, 5:40 p.m. UTC | #1
On Thu, Sep 13, 2012 at 10:00 AM, Jiang Liu <liuj97@gmail.com> wrote:
> This patch introduces two root bridge hotplug safe interfaces to walk
> all root buses. Function pci_get_root_buses() takes a snopshot of the
> pci_root_buses list and holds a reference count to each root buses.
> pci_{get|put}_root_buses are used to replace hotplug unsafe interface
> pci_find_next_bus().

Honestly, I think the whole idea of walking these lists is wrong, and
adding safer interfaces just perpetuates the idea that it's OK to walk
them.

We should be doing the setup in the device add path instead.  I know
we have other issues with that in some cases, but I'd like to at least
move in that direction.

For example, sba_init() is a problem because it's an ACPI driver, and
we currently enumerate PCI devices before binding most ACPI drivers.
That's broken -- in that particular case, there's an HWP0001 IOMMU
device that encloses the PNP0A03 PCI host bridge.  Currently we bind
the PNP0A03 driver first, enumerate the PCI devices below it, then
bind the HWP0001 driver (sba_init).  Obviously that's backwards and
the HWP0001 driver should have been bound first, then the PNP0A03
driver.  But I don't think we're ready to make that shift yet (though
it'd be nice if somebody were working on it).

I wonder if we could add some kind of iterator that does the list
traversals in the PCI core and calls a callback for every device?  I
think that would work for sba_init(), but I don't know about the
others.  This would still be ugly in that the iterator would have to
hold some sort of hotplug lock while doing for_each_pci_dev() and the
callers, e.g., sba_init(), are not solving the problem for hot-added
devices, but at least the locking would be in the core and the drivers
would stop depending on the lists themselves.

> Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
> ---
> Hi Bjorn,
>         How about this solution? We could avoid the global lock by
> taking a snapshot of the pci_root_buses list.
>         These two patches just pass basic compilation tests on x86:)
>         Regards!
>         Gerry
> ---
>  arch/ia64/hp/common/sba_iommu.c   |   10 +++++++---
>  arch/ia64/sn/kernel/io_common.c   |   12 ++++++-----
>  arch/sparc/kernel/pci.c           |   15 ++++++++------
>  arch/x86/pci/common.c             |   10 ++++++++--
>  drivers/edac/i7core_edac.c        |    9 ++++++---
>  drivers/gpu/drm/drm_fops.c        |   10 +++++++---
>  drivers/pci/hotplug/sgi_hotplug.c |    7 ++++++-
>  drivers/pci/pci-sysfs.c           |    9 ++++++---
>  drivers/pci/search.c              |   40 +++++++++++++++++++++++++++++++++++++
>  include/linux/pci.h               |   11 ++++++++++
>  10 files changed, 107 insertions(+), 26 deletions(-)
>
> diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
> index bcda5b2..2903c58 100644
> --- a/arch/ia64/hp/common/sba_iommu.c
> +++ b/arch/ia64/hp/common/sba_iommu.c
> @@ -2155,9 +2155,13 @@ sba_init(void)
>
>  #ifdef CONFIG_PCI
>         {
> -               struct pci_bus *b = NULL;
> -               while ((b = pci_find_next_bus(b)) != NULL)
> -                       sba_connect_bus(b);
> +               int i, count;
> +               struct pci_bus **buses = NULL;
> +
> +               buses = pci_get_root_buses(&count);
> +               for (i = 0; i < count; i++)
> +                       sba_connect_bus(buses[i]);
> +               pci_put_root_buses(buses, count);
>         }
>  #endif
>
> diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c
> index 8630875..f667971 100644
> --- a/arch/ia64/sn/kernel/io_common.c
> +++ b/arch/ia64/sn/kernel/io_common.c
> @@ -516,7 +516,8 @@ arch_initcall(sn_io_early_init);
>  int __init
>  sn_io_late_init(void)
>  {
> -       struct pci_bus *bus;
> +       int i, count;
> +       struct pci_bus **buses
>         struct pcibus_bussoft *bussoft;
>         cnodeid_t cnode;
>         nasid_t nasid;
> @@ -530,9 +531,9 @@ sn_io_late_init(void)
>          * PIC, TIOCP, TIOCE (TIOCA does it during bus fixup using
>          * info from the PROM).
>          */
> -       bus = NULL;
> -       while ((bus = pci_find_next_bus(bus)) != NULL) {
> -               bussoft = SN_PCIBUS_BUSSOFT(bus);
> +       buses = pci_get_root_buses(&count);
> +       for (i = 0; i < count; i++) {
> +               bussoft = SN_PCIBUS_BUSSOFT(buses[i]);
>                 nasid = NASID_GET(bussoft->bs_base);
>                 cnode = nasid_to_cnodeid(nasid);
>                 if ((bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCP) ||
> @@ -547,9 +548,10 @@ sn_io_late_init(void)
>                                        "to find near node with CPUs for "
>                                        "node %d, err=%d\n", cnode, e);
>                         }
> -                       PCI_CONTROLLER(bus)->node = near_cnode;
> +                       PCI_CONTROLLER(buses[i])->node = near_cnode;
>                 }
>         }
> +       pci_put_root_buses(buses, count);
>
>         sn_ioif_inited = 1;     /* SN I/O infrastructure now initialized */
>
> diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
> index 0e8f43a..00d2a83 100644
> --- a/arch/sparc/kernel/pci.c
> +++ b/arch/sparc/kernel/pci.c
> @@ -1005,23 +1005,26 @@ static void __devinit pci_bus_slot_names(struct device_node *node,
>
>  static int __init of_pci_slot_init(void)
>  {
> -       struct pci_bus *pbus = NULL;
> +       int i, count;
> +       struct pci_bus **buses;
>
> -       while ((pbus = pci_find_next_bus(pbus)) != NULL) {
> +       buses = pci_get_root_buses(&count);
> +       for (i = 0; i < count; i++) {
>                 struct device_node *node;
>
> -               if (pbus->self) {
> +               if (buses[i]->self) {
>                         /* PCI->PCI bridge */
> -                       node = pbus->self->dev.of_node;
> +                       node = buses[i]->self->dev.of_node;
>                 } else {
> -                       struct pci_pbm_info *pbm = pbus->sysdata;
> +                       struct pci_pbm_info *pbm = buses[i]->sysdata;
>
>                         /* Host PCI controller */
>                         node = pbm->op->dev.of_node;
>                 }
>
> -               pci_bus_slot_names(node, pbus);
> +               pci_bus_slot_names(node, buses[i]);
>         }
> +       pci_put_root_buses(buses, count);
>
>         return 0;
>  }
> diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
> index 720e973f..986be6e 100644
> --- a/arch/x86/pci/common.c
> +++ b/arch/x86/pci/common.c
> @@ -446,14 +446,20 @@ void __init dmi_check_pciprobe(void)
>
>  struct pci_bus * __devinit pcibios_scan_root(int busnum)
>  {
> -       struct pci_bus *bus = NULL;
> +       int i, count;
> +       struct pci_bus *bus;
> +       struct pci_bus **buses;
>
> -       while ((bus = pci_find_next_bus(bus)) != NULL) {
> +       buses = pci_get_root_buses(&count);
> +       for (i = 0; i < count; i++) {
> +               bus = buses[i];
>                 if (bus->number == busnum) {
> +                       pci_put_root_buses(buses, count);
>                         /* Already scanned */
>                         return bus;
>                 }
>         }
> +       pci_put_root_buses(buses, count);
>
>         return pci_scan_bus_on_node(busnum, &pci_root_ops,
>                                         get_mp_bus_to_node(busnum));
> diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
> index 3672101..4f4b221 100644
> --- a/drivers/edac/i7core_edac.c
> +++ b/drivers/edac/i7core_edac.c
> @@ -1294,14 +1294,17 @@ static void __init i7core_xeon_pci_fixup(const struct pci_id_table *table)
>  static unsigned i7core_pci_lastbus(void)
>  {
>         int last_bus = 0, bus;
> -       struct pci_bus *b = NULL;
> +       int i, count;
> +       struct pci_bus **buses;
>
> -       while ((b = pci_find_next_bus(b)) != NULL) {
> -               bus = b->number;
> +       buses = pci_get_root_buses(&count);
> +       for (i = 0; i < count; i++) {
> +               bus = buses[i]->number;
>                 edac_dbg(0, "Found bus %d\n", bus);
>                 if (bus > last_bus)
>                         last_bus = bus;
>         }
> +       pci_put_root_buses(buses, count);
>
>         edac_dbg(0, "Last bus %d\n", last_bus);
>
> diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c
> index 5062eec..1a9955f 100644
> --- a/drivers/gpu/drm/drm_fops.c
> +++ b/drivers/gpu/drm/drm_fops.c
> @@ -340,9 +340,13 @@ static int drm_open_helper(struct inode *inode, struct file *filp,
>                         pci_dev_put(pci_dev);
>                 }
>                 if (!dev->hose) {
> -                       struct pci_bus *b = pci_bus_b(pci_root_buses.next);
> -                       if (b)
> -                               dev->hose = b->sysdata;
> +                       int count;
> +                       struct pci_bus **buses;
> +
> +                       buses = pci_get_root_buses(&count);
> +                       if (count > 0)
> +                               dev->hose = buses[0]->sysdata;
> +                       pci_put_root_buses(buses, count);
>                 }
>         }
>  #endif
> diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
> index f64ca92..6ec3ecb 100644
> --- a/drivers/pci/hotplug/sgi_hotplug.c
> +++ b/drivers/pci/hotplug/sgi_hotplug.c
> @@ -679,8 +679,10 @@ alloc_err:
>  static int __init sn_pci_hotplug_init(void)
>  {
>         struct pci_bus *pci_bus = NULL;
> +       struct pci_bus **buses;
>         int rc;
>         int registered = 0;
> +       int i, count;
>
>         if (!sn_prom_feature_available(PRF_HOTPLUG_SUPPORT)) {
>                 printk(KERN_ERR "%s: PROM version does not support hotplug.\n",
> @@ -690,7 +692,9 @@ static int __init sn_pci_hotplug_init(void)
>
>         INIT_LIST_HEAD(&sn_hp_list);
>
> -       while ((pci_bus = pci_find_next_bus(pci_bus))) {
> +       buses = pci_get_root_buses(&count);
> +       for (i = 0; i < count; i++) {
> +               pci_bus = buses[i];
>                 if (!pci_bus->sysdata)
>                         continue;
>
> @@ -709,6 +713,7 @@ static int __init sn_pci_hotplug_init(void)
>                         break;
>                 }
>         }
> +       pci_put_root_buses(buses, count);
>
>         return registered == 1 ? 0 : -ENODEV;
>  }
> diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
> index 6869009..f8e9309 100644
> --- a/drivers/pci/pci-sysfs.c
> +++ b/drivers/pci/pci-sysfs.c
> @@ -290,15 +290,18 @@ static ssize_t bus_rescan_store(struct bus_type *bus, const char *buf,
>                                 size_t count)
>  {
>         unsigned long val;
> -       struct pci_bus *b = NULL;
> +       int i, num;
> +       struct pci_bus **buses;
>
>         if (strict_strtoul(buf, 0, &val) < 0)
>                 return -EINVAL;
>
>         if (val) {
>                 mutex_lock(&pci_remove_rescan_mutex);
> -               while ((b = pci_find_next_bus(b)) != NULL)
> -                       pci_rescan_bus(b);
> +               buses = pci_get_root_buses(&num);
> +               for (i = 0; i < num; i++)
> +                       pci_rescan_bus(buses[i]);
> +               pci_put_root_buses(buses, num);
>                 mutex_unlock(&pci_remove_rescan_mutex);
>         }
>         return count;
> diff --git a/drivers/pci/search.c b/drivers/pci/search.c
> index 8f68dbe..8b20a33 100644
> --- a/drivers/pci/search.c
> +++ b/drivers/pci/search.c
> @@ -140,6 +140,46 @@ pci_find_next_bus(const struct pci_bus *from)
>         return b;
>  }
>
> +struct pci_bus **
> +pci_get_root_buses(int *bus_num)
> +{
> +       int count;
> +       struct pci_bus *bus;
> +       struct pci_bus **buses = NULL;
> +
> +       down_read(&pci_bus_sem);
> +
> +       count = 0;
> +       list_for_each_entry(bus, &pci_root_buses, node)
> +               count++;
> +
> +       if (count)
> +               buses = kmalloc(sizeof(*buses) * count, GFP_KERNEL);
> +
> +       if (buses) {
> +               count = 0;
> +               list_for_each_entry(bus, &pci_root_buses, node)
> +                       buses[count++] = pci_bus_get(bus);
> +               *bus_num = count;
> +       } else
> +               *bus_num = 0;
> +
> +       up_read(&pci_bus_sem);
> +
> +       return buses;
> +}
> +EXPORT_SYMBOL(pci_get_root_buses);
> +
> +void pci_put_root_buses(struct pci_bus **buses, int count)
> +{
> +       int i;
> +
> +       for (i = 0; i < count; i++)
> +               pci_bus_put(buses[i]);
> +       kfree(buses);
> +}
> +EXPORT_SYMBOL(pci_put_root_buses);
> +
>  /**
>   * pci_get_slot - locate PCI device for a given PCI slot
>   * @bus: PCI bus on which desired PCI device resides
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 98de988..bc1ab5f 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -757,6 +757,8 @@ int pci_find_next_ext_capability(struct pci_dev *dev, int pos, int cap);
>  int pci_find_ht_capability(struct pci_dev *dev, int ht_cap);
>  int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap);
>  struct pci_bus *pci_find_next_bus(const struct pci_bus *from);
> +struct pci_bus ** pci_get_root_buses(int *bus_num);
> +void pci_put_root_buses(struct pci_bus **buses, int count);
>
>  struct pci_dev *pci_get_device(unsigned int vendor, unsigned int device,
>                                 struct pci_dev *from);
> @@ -1402,6 +1404,15 @@ static inline void pci_unblock_cfg_access(struct pci_dev *dev)
>  static inline struct pci_bus *pci_find_next_bus(const struct pci_bus *from)
>  { return NULL; }
>
> +static inline struct pci_bus ** pci_get_root_buses(int *bus_num)
> +{
> +       *bus_num = 0;
> +       return NULL;
> +}
> +
> +static inline void pci_put_root_buses(struct pci_bus **buses, int count)
> +{ }
> +
>  static inline struct pci_dev *pci_get_slot(struct pci_bus *bus,
>                                                 unsigned int devfn)
>  { return NULL; }
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jiang Liu Sept. 17, 2012, 3:55 p.m. UTC | #2
On 09/14/2012 01:40 AM, Bjorn Helgaas wrote:
> On Thu, Sep 13, 2012 at 10:00 AM, Jiang Liu <liuj97@gmail.com> wrote:
>> This patch introduces two root bridge hotplug safe interfaces to walk
>> all root buses. Function pci_get_root_buses() takes a snopshot of the
>> pci_root_buses list and holds a reference count to each root buses.
>> pci_{get|put}_root_buses are used to replace hotplug unsafe interface
>> pci_find_next_bus().
> 
> Honestly, I think the whole idea of walking these lists is wrong, and
> adding safer interfaces just perpetuates the idea that it's OK to walk
> them.
> 
> We should be doing the setup in the device add path instead.  I know
> we have other issues with that in some cases, but I'd like to at least
> move in that direction.
> 
> For example, sba_init() is a problem because it's an ACPI driver, and
> we currently enumerate PCI devices before binding most ACPI drivers.
> That's broken -- in that particular case, there's an HWP0001 IOMMU
> device that encloses the PNP0A03 PCI host bridge.  Currently we bind
> the PNP0A03 driver first, enumerate the PCI devices below it, then
> bind the HWP0001 driver (sba_init).  Obviously that's backwards and
> the HWP0001 driver should have been bound first, then the PNP0A03
> driver.  But I don't think we're ready to make that shift yet (though
> it'd be nice if somebody were working on it).
I remember there were some discussions on the mail list above the divergence
between boot and hotplug paths. But it's a little hard for me to work on
this, I only have experience with PCI on IA64 and x86:(

> 
> I wonder if we could add some kind of iterator that does the list
> traversals in the PCI core and calls a callback for every device?  I
> think that would work for sba_init(), but I don't know about the
> others.  This would still be ugly in that the iterator would have to
> hold some sort of hotplug lock while doing for_each_pci_dev() and the
> callers, e.g., sba_init(), are not solving the problem for hot-added
> devices, but at least the locking would be in the core and the drivers
> would stop depending on the lists themselves.
I will try the iterator first, hope we could find a solution here.
--Gerry

> 

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Bjorn Helgaas Sept. 17, 2012, 4:24 p.m. UTC | #3
On Mon, Sep 17, 2012 at 9:55 AM, Jiang Liu <liuj97@gmail.com> wrote:
> On 09/14/2012 01:40 AM, Bjorn Helgaas wrote:
>> On Thu, Sep 13, 2012 at 10:00 AM, Jiang Liu <liuj97@gmail.com> wrote:
>>> This patch introduces two root bridge hotplug safe interfaces to walk
>>> all root buses. Function pci_get_root_buses() takes a snopshot of the
>>> pci_root_buses list and holds a reference count to each root buses.
>>> pci_{get|put}_root_buses are used to replace hotplug unsafe interface
>>> pci_find_next_bus().
>>
>> Honestly, I think the whole idea of walking these lists is wrong, and
>> adding safer interfaces just perpetuates the idea that it's OK to walk
>> them.
>>
>> We should be doing the setup in the device add path instead.  I know
>> we have other issues with that in some cases, but I'd like to at least
>> move in that direction.
>>
>> For example, sba_init() is a problem because it's an ACPI driver, and
>> we currently enumerate PCI devices before binding most ACPI drivers.
>> That's broken -- in that particular case, there's an HWP0001 IOMMU
>> device that encloses the PNP0A03 PCI host bridge.  Currently we bind
>> the PNP0A03 driver first, enumerate the PCI devices below it, then
>> bind the HWP0001 driver (sba_init).  Obviously that's backwards and
>> the HWP0001 driver should have been bound first, then the PNP0A03
>> driver.  But I don't think we're ready to make that shift yet (though
>> it'd be nice if somebody were working on it).
> I remember there were some discussions on the mail list above the divergence
> between boot and hotplug paths. But it's a little hard for me to work on
> this, I only have experience with PCI on IA64 and x86:(
>
>>
>> I wonder if we could add some kind of iterator that does the list
>> traversals in the PCI core and calls a callback for every device?  I
>> think that would work for sba_init(), but I don't know about the
>> others.  This would still be ugly in that the iterator would have to
>> hold some sort of hotplug lock while doing for_each_pci_dev() and the
>> callers, e.g., sba_init(), are not solving the problem for hot-added
>> devices, but at least the locking would be in the core and the drivers
>> would stop depending on the lists themselves.

> I will try the iterator first, hope we could find a solution here.

A plain iterator only handles devices that already exist.  But I
wonder if it would work to have an interface like "call this callback
for every device that exists already *and* for every device that's
hot-added in the future."  The bus notifiers are close to this, e.g.,
"bus_register_notifier(&pci_bus_type, ...)" handles this for hot-added
devices.  A little glue around it could take care of doing it for
already-existing devices as well.
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Bjorn Helgaas Sept. 18, 2012, 9:39 p.m. UTC | #4
On Mon, Sep 17, 2012 at 10:24 AM, Bjorn Helgaas <bhelgaas@google.com> wrote:
> On Mon, Sep 17, 2012 at 9:55 AM, Jiang Liu <liuj97@gmail.com> wrote:
>> On 09/14/2012 01:40 AM, Bjorn Helgaas wrote:
>>> On Thu, Sep 13, 2012 at 10:00 AM, Jiang Liu <liuj97@gmail.com> wrote:
>>>> This patch introduces two root bridge hotplug safe interfaces to walk
>>>> all root buses. Function pci_get_root_buses() takes a snopshot of the
>>>> pci_root_buses list and holds a reference count to each root buses.
>>>> pci_{get|put}_root_buses are used to replace hotplug unsafe interface
>>>> pci_find_next_bus().
>>>
>>> Honestly, I think the whole idea of walking these lists is wrong, and
>>> adding safer interfaces just perpetuates the idea that it's OK to walk
>>> them.
>>>
>>> We should be doing the setup in the device add path instead.  I know
>>> we have other issues with that in some cases, but I'd like to at least
>>> move in that direction.
>>>
>>> For example, sba_init() is a problem because it's an ACPI driver, and
>>> we currently enumerate PCI devices before binding most ACPI drivers.
>>> That's broken -- in that particular case, there's an HWP0001 IOMMU
>>> device that encloses the PNP0A03 PCI host bridge.  Currently we bind
>>> the PNP0A03 driver first, enumerate the PCI devices below it, then
>>> bind the HWP0001 driver (sba_init).  Obviously that's backwards and
>>> the HWP0001 driver should have been bound first, then the PNP0A03
>>> driver.  But I don't think we're ready to make that shift yet (though
>>> it'd be nice if somebody were working on it).
>> I remember there were some discussions on the mail list above the divergence
>> between boot and hotplug paths. But it's a little hard for me to work on
>> this, I only have experience with PCI on IA64 and x86:(
>>
>>>
>>> I wonder if we could add some kind of iterator that does the list
>>> traversals in the PCI core and calls a callback for every device?  I
>>> think that would work for sba_init(), but I don't know about the
>>> others.  This would still be ugly in that the iterator would have to
>>> hold some sort of hotplug lock while doing for_each_pci_dev() and the
>>> callers, e.g., sba_init(), are not solving the problem for hot-added
>>> devices, but at least the locking would be in the core and the drivers
>>> would stop depending on the lists themselves.
>
>> I will try the iterator first, hope we could find a solution here.
>
> A plain iterator only handles devices that already exist.  But I
> wonder if it would work to have an interface like "call this callback
> for every device that exists already *and* for every device that's
> hot-added in the future."  The bus notifiers are close to this, e.g.,
> "bus_register_notifier(&pci_bus_type, ...)" handles this for hot-added
> devices.  A little glue around it could take care of doing it for
> already-existing devices as well.

BTW, while reviewing Yinghai's vga patch, I found a case in
vga_arb_device_init() that does exactly this: registers a notifier to
catch future hot-added devices, then calls the notifier "add" function
for every existing device.  So that's another place that could use
something like this.
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index bcda5b2..2903c58 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -2155,9 +2155,13 @@  sba_init(void)
 
 #ifdef CONFIG_PCI
 	{
-		struct pci_bus *b = NULL;
-		while ((b = pci_find_next_bus(b)) != NULL)
-			sba_connect_bus(b);
+		int i, count;
+		struct pci_bus **buses = NULL;
+
+		buses = pci_get_root_buses(&count);
+		for (i = 0; i < count; i++)
+			sba_connect_bus(buses[i]);
+		pci_put_root_buses(buses, count);
 	}
 #endif
 
diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c
index 8630875..f667971 100644
--- a/arch/ia64/sn/kernel/io_common.c
+++ b/arch/ia64/sn/kernel/io_common.c
@@ -516,7 +516,8 @@  arch_initcall(sn_io_early_init);
 int __init
 sn_io_late_init(void)
 {
-	struct pci_bus *bus;
+	int i, count;
+	struct pci_bus **buses
 	struct pcibus_bussoft *bussoft;
 	cnodeid_t cnode;
 	nasid_t nasid;
@@ -530,9 +531,9 @@  sn_io_late_init(void)
 	 * PIC, TIOCP, TIOCE (TIOCA does it during bus fixup using
 	 * info from the PROM).
 	 */
-	bus = NULL;
-	while ((bus = pci_find_next_bus(bus)) != NULL) {
-		bussoft = SN_PCIBUS_BUSSOFT(bus);
+	buses = pci_get_root_buses(&count);
+	for (i = 0; i < count; i++) {
+		bussoft = SN_PCIBUS_BUSSOFT(buses[i]);
 		nasid = NASID_GET(bussoft->bs_base);
 		cnode = nasid_to_cnodeid(nasid);
 		if ((bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCP) ||
@@ -547,9 +548,10 @@  sn_io_late_init(void)
 				       "to find near node with CPUs for "
 				       "node %d, err=%d\n", cnode, e);
 			}
-			PCI_CONTROLLER(bus)->node = near_cnode;
+			PCI_CONTROLLER(buses[i])->node = near_cnode;
 		}
 	}
+	pci_put_root_buses(buses, count);
 
 	sn_ioif_inited = 1;	/* SN I/O infrastructure now initialized */
 
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 0e8f43a..00d2a83 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -1005,23 +1005,26 @@  static void __devinit pci_bus_slot_names(struct device_node *node,
 
 static int __init of_pci_slot_init(void)
 {
-	struct pci_bus *pbus = NULL;
+	int i, count;
+	struct pci_bus **buses;
 
-	while ((pbus = pci_find_next_bus(pbus)) != NULL) {
+	buses = pci_get_root_buses(&count);
+	for (i = 0; i < count; i++) {
 		struct device_node *node;
 
-		if (pbus->self) {
+		if (buses[i]->self) {
 			/* PCI->PCI bridge */
-			node = pbus->self->dev.of_node;
+			node = buses[i]->self->dev.of_node;
 		} else {
-			struct pci_pbm_info *pbm = pbus->sysdata;
+			struct pci_pbm_info *pbm = buses[i]->sysdata;
 
 			/* Host PCI controller */
 			node = pbm->op->dev.of_node;
 		}
 
-		pci_bus_slot_names(node, pbus);
+		pci_bus_slot_names(node, buses[i]);
 	}
+	pci_put_root_buses(buses, count);
 
 	return 0;
 }
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 720e973f..986be6e 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -446,14 +446,20 @@  void __init dmi_check_pciprobe(void)
 
 struct pci_bus * __devinit pcibios_scan_root(int busnum)
 {
-	struct pci_bus *bus = NULL;
+	int i, count;
+	struct pci_bus *bus;
+	struct pci_bus **buses;
 
-	while ((bus = pci_find_next_bus(bus)) != NULL) {
+	buses = pci_get_root_buses(&count);
+	for (i = 0; i < count; i++) {
+		bus = buses[i];
 		if (bus->number == busnum) {
+			pci_put_root_buses(buses, count);
 			/* Already scanned */
 			return bus;
 		}
 	}
+	pci_put_root_buses(buses, count);
 
 	return pci_scan_bus_on_node(busnum, &pci_root_ops,
 					get_mp_bus_to_node(busnum));
diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
index 3672101..4f4b221 100644
--- a/drivers/edac/i7core_edac.c
+++ b/drivers/edac/i7core_edac.c
@@ -1294,14 +1294,17 @@  static void __init i7core_xeon_pci_fixup(const struct pci_id_table *table)
 static unsigned i7core_pci_lastbus(void)
 {
 	int last_bus = 0, bus;
-	struct pci_bus *b = NULL;
+	int i, count;
+	struct pci_bus **buses;
 
-	while ((b = pci_find_next_bus(b)) != NULL) {
-		bus = b->number;
+	buses = pci_get_root_buses(&count);
+	for (i = 0; i < count; i++) {
+		bus = buses[i]->number;
 		edac_dbg(0, "Found bus %d\n", bus);
 		if (bus > last_bus)
 			last_bus = bus;
 	}
+	pci_put_root_buses(buses, count);
 
 	edac_dbg(0, "Last bus %d\n", last_bus);
 
diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c
index 5062eec..1a9955f 100644
--- a/drivers/gpu/drm/drm_fops.c
+++ b/drivers/gpu/drm/drm_fops.c
@@ -340,9 +340,13 @@  static int drm_open_helper(struct inode *inode, struct file *filp,
 			pci_dev_put(pci_dev);
 		}
 		if (!dev->hose) {
-			struct pci_bus *b = pci_bus_b(pci_root_buses.next);
-			if (b)
-				dev->hose = b->sysdata;
+			int count;
+			struct pci_bus **buses;
+
+			buses = pci_get_root_buses(&count);
+			if (count > 0)
+				dev->hose = buses[0]->sysdata;
+			pci_put_root_buses(buses, count);
 		}
 	}
 #endif
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
index f64ca92..6ec3ecb 100644
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ b/drivers/pci/hotplug/sgi_hotplug.c
@@ -679,8 +679,10 @@  alloc_err:
 static int __init sn_pci_hotplug_init(void)
 {
 	struct pci_bus *pci_bus = NULL;
+	struct pci_bus **buses;
 	int rc;
 	int registered = 0;
+	int i, count;
 
 	if (!sn_prom_feature_available(PRF_HOTPLUG_SUPPORT)) {
 		printk(KERN_ERR "%s: PROM version does not support hotplug.\n",
@@ -690,7 +692,9 @@  static int __init sn_pci_hotplug_init(void)
 
 	INIT_LIST_HEAD(&sn_hp_list);
 
-	while ((pci_bus = pci_find_next_bus(pci_bus))) {
+	buses = pci_get_root_buses(&count);
+	for (i = 0; i < count; i++) {
+		pci_bus = buses[i];
 		if (!pci_bus->sysdata)
 			continue;
 
@@ -709,6 +713,7 @@  static int __init sn_pci_hotplug_init(void)
 			break;
 		}
 	}
+	pci_put_root_buses(buses, count);
 
 	return registered == 1 ? 0 : -ENODEV;
 }
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 6869009..f8e9309 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -290,15 +290,18 @@  static ssize_t bus_rescan_store(struct bus_type *bus, const char *buf,
 				size_t count)
 {
 	unsigned long val;
-	struct pci_bus *b = NULL;
+	int i, num;
+	struct pci_bus **buses;
 
 	if (strict_strtoul(buf, 0, &val) < 0)
 		return -EINVAL;
 
 	if (val) {
 		mutex_lock(&pci_remove_rescan_mutex);
-		while ((b = pci_find_next_bus(b)) != NULL)
-			pci_rescan_bus(b);
+		buses = pci_get_root_buses(&num);
+		for (i = 0; i < num; i++)
+			pci_rescan_bus(buses[i]);
+		pci_put_root_buses(buses, num);
 		mutex_unlock(&pci_remove_rescan_mutex);
 	}
 	return count;
diff --git a/drivers/pci/search.c b/drivers/pci/search.c
index 8f68dbe..8b20a33 100644
--- a/drivers/pci/search.c
+++ b/drivers/pci/search.c
@@ -140,6 +140,46 @@  pci_find_next_bus(const struct pci_bus *from)
 	return b;
 }
 
+struct pci_bus **
+pci_get_root_buses(int *bus_num)
+{
+	int count;
+	struct pci_bus *bus;
+	struct pci_bus **buses = NULL;
+
+	down_read(&pci_bus_sem);
+
+	count = 0;
+	list_for_each_entry(bus, &pci_root_buses, node)
+		count++;
+
+	if (count)
+		buses = kmalloc(sizeof(*buses) * count, GFP_KERNEL);
+
+	if (buses) {
+		count = 0;
+		list_for_each_entry(bus, &pci_root_buses, node)
+			buses[count++] = pci_bus_get(bus);
+		*bus_num = count;
+	} else
+		*bus_num = 0;
+
+	up_read(&pci_bus_sem);
+
+	return buses;
+}
+EXPORT_SYMBOL(pci_get_root_buses);
+
+void pci_put_root_buses(struct pci_bus **buses, int count)
+{
+	int i;
+
+	for (i = 0; i < count; i++)
+		pci_bus_put(buses[i]);
+	kfree(buses);
+}
+EXPORT_SYMBOL(pci_put_root_buses);
+
 /**
  * pci_get_slot - locate PCI device for a given PCI slot
  * @bus: PCI bus on which desired PCI device resides
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 98de988..bc1ab5f 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -757,6 +757,8 @@  int pci_find_next_ext_capability(struct pci_dev *dev, int pos, int cap);
 int pci_find_ht_capability(struct pci_dev *dev, int ht_cap);
 int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap);
 struct pci_bus *pci_find_next_bus(const struct pci_bus *from);
+struct pci_bus ** pci_get_root_buses(int *bus_num);
+void pci_put_root_buses(struct pci_bus **buses, int count);
 
 struct pci_dev *pci_get_device(unsigned int vendor, unsigned int device,
 				struct pci_dev *from);
@@ -1402,6 +1404,15 @@  static inline void pci_unblock_cfg_access(struct pci_dev *dev)
 static inline struct pci_bus *pci_find_next_bus(const struct pci_bus *from)
 { return NULL; }
 
+static inline struct pci_bus ** pci_get_root_buses(int *bus_num)
+{
+	*bus_num = 0;
+	return NULL;
+}
+
+static inline void pci_put_root_buses(struct pci_bus **buses, int count)
+{ }
+
 static inline struct pci_dev *pci_get_slot(struct pci_bus *bus,
 						unsigned int devfn)
 { return NULL; }