diff mbox

[3/6] PCI/AER: clean all untracked pci_ops_aer when rmmod aer_inject

Message ID 1348022442-7816-4-git-send-email-wangyijing@huawei.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Yijing Wang Sept. 19, 2012, 2:40 a.m. UTC
Since hot plug for pci devices while doing aer inject, some newly created child buses'
pci_ops will be assigned to pci_ops_aer. Aer_inject does not track these pci_ops_aer(not
list in pci_bus_ops_list),we should clean all of these when rmmod aer_inject module.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/pci/pcie/aer/aer_inject.c |   35 +++++++++++++++++++++++++++++++++++
 1 files changed, 35 insertions(+), 0 deletions(-)

Comments

Huang, Ying Sept. 19, 2012, 5:57 a.m. UTC | #1
On Wed, 2012-09-19 at 10:40 +0800, Yijing Wang wrote:
> Since hot plug for pci devices while doing aer inject, some newly created child buses'
> pci_ops will be assigned to pci_ops_aer. Aer_inject does not track these pci_ops_aer(not
> list in pci_bus_ops_list),we should clean all of these when rmmod aer_inject module.
> 
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> ---
>  drivers/pci/pcie/aer/aer_inject.c |   35 +++++++++++++++++++++++++++++++++++
>  1 files changed, 35 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c
> index 442147b..e2400b5 100644
> --- a/drivers/pci/pcie/aer/aer_inject.c
> +++ b/drivers/pci/pcie/aer/aer_inject.c
> @@ -299,6 +299,32 @@ static void pci_bus_ops_init(struct pci_bus_ops *bus_ops,
>  	bus_ops->ops = ops;
>  }
>  
> +static void pci_clean_child_aer_ops(struct pci_bus *bus)
> +{
> +	struct pci_bus *child;
> +
> +	list_for_each_entry(child, &bus->children, node) {
> +		if (child->ops == &pci_ops_aer)
> +			pci_bus_set_ops(child, bus->ops);
> +		pci_clean_child_aer_ops(child);
> +	}

Why not use pci_walk_bus?

> +}
> +
> +/* find pci_ops_aer from root bus, and replace it by parent bus's pci_ops.
> + * pci_ops of root bus won't be pci_ops_aer here*/
> +static void clean_untracked_pci_ops_aer(void)
> +{
> +	struct pci_bus_ops *bus_ops;
> +
> +	list_for_each_entry(bus_ops, &pci_bus_ops_list, list) {
> +		/* the bus with untracked pci_ops_aer always the
> +		 * child bus of root bus tracked in pci_bus_ops_list
> +		 */
> +		if (pci_is_root_bus(bus_ops->bus))
> +			pci_clean_child_aer_ops(bus_ops->bus);
> +	}
> +}
> +
>  static int pci_bus_set_aer_ops(struct pci_bus *bus)
>  {
>  	struct pci_ops *ops;
> @@ -558,9 +584,18 @@ static void __exit aer_inject_exit(void)
>  
>  	misc_deregister(&aer_inject_device);
>  
> +	/* clean pci_bus_ops tracked in pci_bus_ops_list */
>  	while ((bus_ops = pci_bus_ops_get(bus_ops)))
>  		pci_bus_set_ops(bus_ops->bus, bus_ops->ops);

Why not do clean here inside loop?

Best Regards,
Huang Ying

>  
> +	/* Inject aer errors and hotplug the same pcie device
> +	 * maybe assign some newly created buses' pci_ops pci_ops_aer.
> +	 * Since these pci_ops_aer are not tracked in pci_bus_ops_list,
> +	 * we need to find and clean untracked pci_ops_aer before aer_inject
> +	 * module exit
> +	 */
> +	clean_untracked_pci_ops_aer();
> +
>  	while ((bus_ops = pci_bus_ops_pop()))
>  		kfree(bus_ops);
>  


--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Yijing Wang Sept. 19, 2012, 6:09 a.m. UTC | #2
On 2012/9/19 13:57, Huang Ying wrote:
> On Wed, 2012-09-19 at 10:40 +0800, Yijing Wang wrote:
>> Since hot plug for pci devices while doing aer inject, some newly created child buses'
>> pci_ops will be assigned to pci_ops_aer. Aer_inject does not track these pci_ops_aer(not
>> list in pci_bus_ops_list),we should clean all of these when rmmod aer_inject module.
>>
>> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
>> ---
>>  drivers/pci/pcie/aer/aer_inject.c |   35 +++++++++++++++++++++++++++++++++++
>>  1 files changed, 35 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c
>> index 442147b..e2400b5 100644
>> --- a/drivers/pci/pcie/aer/aer_inject.c
>> +++ b/drivers/pci/pcie/aer/aer_inject.c
>> @@ -299,6 +299,32 @@ static void pci_bus_ops_init(struct pci_bus_ops *bus_ops,
>>  	bus_ops->ops = ops;
>>  }
>>  
>> +static void pci_clean_child_aer_ops(struct pci_bus *bus)
>> +{
>> +	struct pci_bus *child;
>> +
>> +	list_for_each_entry(child, &bus->children, node) {
>> +		if (child->ops == &pci_ops_aer)
>> +			pci_bus_set_ops(child, bus->ops);
>> +		pci_clean_child_aer_ops(child);
>> +	}
> 
> Why not use pci_walk_bus?
> 

I think here walk all child buses is enough, pci_walk_bus will walk all child devices under this bus.

>> +}
>> +
>> +/* find pci_ops_aer from root bus, and replace it by parent bus's pci_ops.
>> + * pci_ops of root bus won't be pci_ops_aer here*/
>> +static void clean_untracked_pci_ops_aer(void)
>> +{
>> +	struct pci_bus_ops *bus_ops;
>> +
>> +	list_for_each_entry(bus_ops, &pci_bus_ops_list, list) {
>> +		/* the bus with untracked pci_ops_aer always the
>> +		 * child bus of root bus tracked in pci_bus_ops_list
>> +		 */
>> +		if (pci_is_root_bus(bus_ops->bus))
>> +			pci_clean_child_aer_ops(bus_ops->bus);
>> +	}
>> +}
>> +
>>  static int pci_bus_set_aer_ops(struct pci_bus *bus)
>>  {
>>  	struct pci_ops *ops;
>> @@ -558,9 +584,18 @@ static void __exit aer_inject_exit(void)
>>  
>>  	misc_deregister(&aer_inject_device);
>>  
>> +	/* clean pci_bus_ops tracked in pci_bus_ops_list */
>>  	while ((bus_ops = pci_bus_ops_get(bus_ops)))
>>  		pci_bus_set_ops(bus_ops->bus, bus_ops->ops);
> 
> Why not do clean here inside loop?
> 

Because I also need these bus_ops to scan untracked pci_ops_aer.

> Best Regards,
> Huang Ying
> 
>>  
>> +	/* Inject aer errors and hotplug the same pcie device
>> +	 * maybe assign some newly created buses' pci_ops pci_ops_aer.
>> +	 * Since these pci_ops_aer are not tracked in pci_bus_ops_list,
>> +	 * we need to find and clean untracked pci_ops_aer before aer_inject
>> +	 * module exit
>> +	 */
>> +	clean_untracked_pci_ops_aer();
>> +
>>  	while ((bus_ops = pci_bus_ops_pop()))
>>  		kfree(bus_ops);
>>  
> 
> 
> 
> .
>
Huang, Ying Sept. 19, 2012, 6:18 a.m. UTC | #3
On Wed, 2012-09-19 at 14:09 +0800, Yijing Wang wrote:
> On 2012/9/19 13:57, Huang Ying wrote:
> > On Wed, 2012-09-19 at 10:40 +0800, Yijing Wang wrote:
> >> Since hot plug for pci devices while doing aer inject, some newly created child buses'
> >> pci_ops will be assigned to pci_ops_aer. Aer_inject does not track these pci_ops_aer(not
> >> list in pci_bus_ops_list),we should clean all of these when rmmod aer_inject module.
> >>
> >> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> >> ---
> >>  drivers/pci/pcie/aer/aer_inject.c |   35 +++++++++++++++++++++++++++++++++++
> >>  1 files changed, 35 insertions(+), 0 deletions(-)
> >>
> >> diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c
> >> index 442147b..e2400b5 100644
> >> --- a/drivers/pci/pcie/aer/aer_inject.c
> >> +++ b/drivers/pci/pcie/aer/aer_inject.c
> >> @@ -299,6 +299,32 @@ static void pci_bus_ops_init(struct pci_bus_ops *bus_ops,
> >>  	bus_ops->ops = ops;
> >>  }
> >>  
> >> +static void pci_clean_child_aer_ops(struct pci_bus *bus)
> >> +{
> >> +	struct pci_bus *child;
> >> +
> >> +	list_for_each_entry(child, &bus->children, node) {
> >> +		if (child->ops == &pci_ops_aer)
> >> +			pci_bus_set_ops(child, bus->ops);
> >> +		pci_clean_child_aer_ops(child);
> >> +	}
> > 
> > Why not use pci_walk_bus?
> > 
> 
> I think here walk all child buses is enough, pci_walk_bus will walk all child devices under this bus.
> 
> >> +}
> >> +
> >> +/* find pci_ops_aer from root bus, and replace it by parent bus's pci_ops.
> >> + * pci_ops of root bus won't be pci_ops_aer here*/
> >> +static void clean_untracked_pci_ops_aer(void)
> >> +{
> >> +	struct pci_bus_ops *bus_ops;
> >> +
> >> +	list_for_each_entry(bus_ops, &pci_bus_ops_list, list) {
> >> +		/* the bus with untracked pci_ops_aer always the
> >> +		 * child bus of root bus tracked in pci_bus_ops_list
> >> +		 */
> >> +		if (pci_is_root_bus(bus_ops->bus))
> >> +			pci_clean_child_aer_ops(bus_ops->bus);
> >> +	}
> >> +}
> >> +
> >>  static int pci_bus_set_aer_ops(struct pci_bus *bus)
> >>  {
> >>  	struct pci_ops *ops;
> >> @@ -558,9 +584,18 @@ static void __exit aer_inject_exit(void)
> >>  
> >>  	misc_deregister(&aer_inject_device);
> >>  
> >> +	/* clean pci_bus_ops tracked in pci_bus_ops_list */
> >>  	while ((bus_ops = pci_bus_ops_get(bus_ops)))
> >>  		pci_bus_set_ops(bus_ops->bus, bus_ops->ops);
> > 
> > Why not do clean here inside loop?
> > 
> 
> Because I also need these bus_ops to scan untracked pci_ops_aer.

I mean why not call pci_clean_child_aer_ops() inside loop.

Best Regards,
Huang Ying

> > 
> >>  
> >> +	/* Inject aer errors and hotplug the same pcie device
> >> +	 * maybe assign some newly created buses' pci_ops pci_ops_aer.
> >> +	 * Since these pci_ops_aer are not tracked in pci_bus_ops_list,
> >> +	 * we need to find and clean untracked pci_ops_aer before aer_inject
> >> +	 * module exit
> >> +	 */
> >> +	clean_untracked_pci_ops_aer();
> >> +
> >>  	while ((bus_ops = pci_bus_ops_pop()))
> >>  		kfree(bus_ops);
> >>  
> > 
> > 
> > 
> > .
> > 
> 
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Yijing Wang Sept. 19, 2012, 6:36 a.m. UTC | #4
On 2012/9/19 14:18, Huang Ying wrote:
> On Wed, 2012-09-19 at 14:09 +0800, Yijing Wang wrote:
>> On 2012/9/19 13:57, Huang Ying wrote:
>>> On Wed, 2012-09-19 at 10:40 +0800, Yijing Wang wrote:
>>>> Since hot plug for pci devices while doing aer inject, some newly created child buses'
>>>> pci_ops will be assigned to pci_ops_aer. Aer_inject does not track these pci_ops_aer(not
>>>> list in pci_bus_ops_list),we should clean all of these when rmmod aer_inject module.
>>>>
>>>> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
>>>> ---
>>>>  drivers/pci/pcie/aer/aer_inject.c |   35 +++++++++++++++++++++++++++++++++++
>>>>  1 files changed, 35 insertions(+), 0 deletions(-)
>>>>
>>>> diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c
>>>> index 442147b..e2400b5 100644
>>>> --- a/drivers/pci/pcie/aer/aer_inject.c
>>>> +++ b/drivers/pci/pcie/aer/aer_inject.c
>>>> @@ -299,6 +299,32 @@ static void pci_bus_ops_init(struct pci_bus_ops *bus_ops,
>>>>  	bus_ops->ops = ops;
>>>>  }
>>>>  
>>>> +static void pci_clean_child_aer_ops(struct pci_bus *bus)
>>>> +{
>>>> +	struct pci_bus *child;
>>>> +
>>>> +	list_for_each_entry(child, &bus->children, node) {
>>>> +		if (child->ops == &pci_ops_aer)
>>>> +			pci_bus_set_ops(child, bus->ops);
>>>> +		pci_clean_child_aer_ops(child);
>>>> +	}
>>>
>>> Why not use pci_walk_bus?
>>>
>>
>> I think here walk all child buses is enough, pci_walk_bus will walk all child devices under this bus.
>>
>>>> +}
>>>> +
>>>> +/* find pci_ops_aer from root bus, and replace it by parent bus's pci_ops.
>>>> + * pci_ops of root bus won't be pci_ops_aer here*/
>>>> +static void clean_untracked_pci_ops_aer(void)
>>>> +{
>>>> +	struct pci_bus_ops *bus_ops;
>>>> +
>>>> +	list_for_each_entry(bus_ops, &pci_bus_ops_list, list) {
>>>> +		/* the bus with untracked pci_ops_aer always the
>>>> +		 * child bus of root bus tracked in pci_bus_ops_list
>>>> +		 */
>>>> +		if (pci_is_root_bus(bus_ops->bus))
>>>> +			pci_clean_child_aer_ops(bus_ops->bus);
>>>> +	}
>>>> +}
>>>> +
>>>>  static int pci_bus_set_aer_ops(struct pci_bus *bus)
>>>>  {
>>>>  	struct pci_ops *ops;
>>>> @@ -558,9 +584,18 @@ static void __exit aer_inject_exit(void)
>>>>  
>>>>  	misc_deregister(&aer_inject_device);
>>>>  
>>>> +	/* clean pci_bus_ops tracked in pci_bus_ops_list */
>>>>  	while ((bus_ops = pci_bus_ops_get(bus_ops)))
>>>>  		pci_bus_set_ops(bus_ops->bus, bus_ops->ops);
>>>
>>> Why not do clean here inside loop?
>>>
>>
>> Because I also need these bus_ops to scan untracked pci_ops_aer.
> 
> I mean why not call pci_clean_child_aer_ops() inside loop.
> 

My idea is first clean all pci_ops_aer tracked in pci_bus_ops_list, second clean all untracked pci_ops_aer.
If put pci_clean_child_aer_ops inside loop, when I clean tracked pci_ops_aer for root bus 0, next I will use
bus 0 's pci_ops to clean bus 1 's pci_ops_aer. Actually maybe bus 1 have its own pci_ops_aer tracked in pci_bus_ops_list.
So I think use every bus's own bus_ops to clean pci_ops_aer first is better.

 \-[0000:00]-+-00.0  Intel Corporation 5500 I/O Hub to ESI Port
             +-01.0-[01]--+-00.0  Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet
             |            \-00.1  Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet


> Best Regards,
> Huang Ying
> 
>>>
>>>>  
>>>> +	/* Inject aer errors and hotplug the same pcie device
>>>> +	 * maybe assign some newly created buses' pci_ops pci_ops_aer.
>>>> +	 * Since these pci_ops_aer are not tracked in pci_bus_ops_list,
>>>> +	 * we need to find and clean untracked pci_ops_aer before aer_inject
>>>> +	 * module exit
>>>> +	 */
>>>> +	clean_untracked_pci_ops_aer();
>>>> +
>>>>  	while ((bus_ops = pci_bus_ops_pop()))
>>>>  		kfree(bus_ops);
>>>>  
>>>
>>>
>>>
>>> .
>>>
>>
>>
> 
> 
> 
> .
>
diff mbox

Patch

diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c
index 442147b..e2400b5 100644
--- a/drivers/pci/pcie/aer/aer_inject.c
+++ b/drivers/pci/pcie/aer/aer_inject.c
@@ -299,6 +299,32 @@  static void pci_bus_ops_init(struct pci_bus_ops *bus_ops,
 	bus_ops->ops = ops;
 }
 
+static void pci_clean_child_aer_ops(struct pci_bus *bus)
+{
+	struct pci_bus *child;
+
+	list_for_each_entry(child, &bus->children, node) {
+		if (child->ops == &pci_ops_aer)
+			pci_bus_set_ops(child, bus->ops);
+		pci_clean_child_aer_ops(child);
+	}
+}
+
+/* find pci_ops_aer from root bus, and replace it by parent bus's pci_ops.
+ * pci_ops of root bus won't be pci_ops_aer here*/
+static void clean_untracked_pci_ops_aer(void)
+{
+	struct pci_bus_ops *bus_ops;
+
+	list_for_each_entry(bus_ops, &pci_bus_ops_list, list) {
+		/* the bus with untracked pci_ops_aer always the
+		 * child bus of root bus tracked in pci_bus_ops_list
+		 */
+		if (pci_is_root_bus(bus_ops->bus))
+			pci_clean_child_aer_ops(bus_ops->bus);
+	}
+}
+
 static int pci_bus_set_aer_ops(struct pci_bus *bus)
 {
 	struct pci_ops *ops;
@@ -558,9 +584,18 @@  static void __exit aer_inject_exit(void)
 
 	misc_deregister(&aer_inject_device);
 
+	/* clean pci_bus_ops tracked in pci_bus_ops_list */
 	while ((bus_ops = pci_bus_ops_get(bus_ops)))
 		pci_bus_set_ops(bus_ops->bus, bus_ops->ops);
 
+	/* Inject aer errors and hotplug the same pcie device
+	 * maybe assign some newly created buses' pci_ops pci_ops_aer.
+	 * Since these pci_ops_aer are not tracked in pci_bus_ops_list,
+	 * we need to find and clean untracked pci_ops_aer before aer_inject
+	 * module exit
+	 */
+	clean_untracked_pci_ops_aer();
+
 	while ((bus_ops = pci_bus_ops_pop()))
 		kfree(bus_ops);