diff mbox

[14/14] ARM: tegra: trimslice: Initialize PCIe from DT

Message ID 1357764194-12677-15-git-send-email-thierry.reding@avionic-design.de (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Thierry Reding Jan. 9, 2013, 8:43 p.m. UTC
With the device tree support in place, probe the PCIe controller from
the device tree and remove the corresponding workaround in the board
file.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
---
Changes in v3:
- update for new DT binding

Changes in v2:
- new patch
---
 arch/arm/boot/dts/tegra20-trimslice.dts | 12 ++++++++++++
 arch/arm/mach-tegra/board-dt-tegra20.c  |  8 --------
 2 files changed, 12 insertions(+), 8 deletions(-)

Comments

Stephen Warren Jan. 10, 2013, 11:56 p.m. UTC | #1
On 01/09/2013 01:43 PM, Thierry Reding wrote:
> With the device tree support in place, probe the PCIe controller from
> the device tree and remove the corresponding workaround in the board
> file.

Thierry, there are a couple things missing from this patch; I include a
fixup for you to squash in, but also see beyond that for a problem.

>  arch/arm/boot/dts/tegra20-trimslice.dts |   26 +++++++++++++++++++++-----
>  1 file changed, 21 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
> index ebb4c17..41fc45b 100644
> --- a/arch/arm/boot/dts/tegra20-trimslice.dts
> +++ b/arch/arm/boot/dts/tegra20-trimslice.dts
> @@ -303,12 +303,10 @@
>  
>  	pcie-controller {
>  		status = "okay";
> +		pex-clk-supply = <&pci_clk_reg>;
> +		vdd-supply = <&pci_vdd_reg>;
>  
> -		pci@0 {
> -			status = "okay";
> -		};
> -
> -		pci@1 {
> +		pci@1,0 {
>  			status = "okay";
>  		};
>  	};
> @@ -366,6 +364,24 @@
>  			regulator-max-microvolt = <1800000>;
>  			regulator-always-on;
>  		};
> +
> +		pci_clk_reg: regulator@2 {
> +			compatible = "regulator-fixed";
> +			reg = <2>;
> +			regulator-name = "pci_clk";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-always-on;
> +		};
> +
> +		pci_vdd_reg: regulator@3 {
> +			compatible = "regulator-fixed";
> +			reg = <3>;
> +			regulator-name = "pci_vdd";
> +			regulator-min-microvolt = <1050000>;
> +			regulator-max-microvolt = <1050000>;
> +			regulator-always-on;
> +		};
>  	};
>  
>  	sound {
> -- 
> 1.7.10.4

However, PCIe still doesn't work on TrimSlice; the device enumeration
fails. The log is below:

> [    0.790425] tegra-pcie 80003000.pcie-controller: link 0 down, retrying
> [    0.801351] tegra-pcie 80003000.pcie-controller: PCI host bridge to bus 0000:00
> [    0.808945] pci_bus 0000:00: root bus resource [io  0x82000000-0x8200ffff]
> [    0.816109] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xafffffff]
> [    0.823303] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xbfffffff pref]
> [    0.830893] pci_bus 0000:00: root bus resource [bus 00-ff]
> [    0.836728] pci 0000:00:01.0: [10de:0bf0] type 01 class 0x060000
> [    0.843097] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
> [    0.850047] PCI: bus0: Fast back to back transfers disabled
> [    0.855853] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
> [    0.864308] tegra-pcie 80003000.pcie-controller: AXI response decoding error, signature: 10010001
> [    0.873489] tegra-pcie 80003000.pcie-controller:   FPCI address: fe10010000

^^^ For some reason, the config register access fails.

> [    0.880760] PCI: bus1: Fast back to back transfers enabled
> [    0.886482] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
> [    0.893381] pci 0000:00:01.0: PCI bridge to [bus 01]
> [    0.898577] PCI: enabling device 0000:00:01.0 (0140 -> 0143)
> [    0.904535] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge

With plain next-20130109, the device enumeration succeeds.
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Thierry Reding Jan. 11, 2013, 6:48 p.m. UTC | #2
On Thu, Jan 10, 2013 at 04:56:39PM -0700, Stephen Warren wrote:
> On 01/09/2013 01:43 PM, Thierry Reding wrote:
> > With the device tree support in place, probe the PCIe controller from
> > the device tree and remove the corresponding workaround in the board
> > file.
> 
> Thierry, there are a couple things missing from this patch; I include a
> fixup for you to squash in, but also see beyond that for a problem.
> 
> >  arch/arm/boot/dts/tegra20-trimslice.dts |   26 +++++++++++++++++++++-----
> >  1 file changed, 21 insertions(+), 5 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
> > index ebb4c17..41fc45b 100644
> > --- a/arch/arm/boot/dts/tegra20-trimslice.dts
> > +++ b/arch/arm/boot/dts/tegra20-trimslice.dts
> > @@ -303,12 +303,10 @@
> >  
> >  	pcie-controller {
> >  		status = "okay";
> > +		pex-clk-supply = <&pci_clk_reg>;
> > +		vdd-supply = <&pci_vdd_reg>;
> >  
> > -		pci@0 {
> > -			status = "okay";
> > -		};
> > -
> > -		pci@1 {
> > +		pci@1,0 {
> >  			status = "okay";
> >  		};
> >  	};
> > @@ -366,6 +364,24 @@
> >  			regulator-max-microvolt = <1800000>;
> >  			regulator-always-on;
> >  		};
> > +
> > +		pci_clk_reg: regulator@2 {
> > +			compatible = "regulator-fixed";
> > +			reg = <2>;
> > +			regulator-name = "pci_clk";
> > +			regulator-min-microvolt = <3300000>;
> > +			regulator-max-microvolt = <3300000>;
> > +			regulator-always-on;
> > +		};
> > +
> > +		pci_vdd_reg: regulator@3 {
> > +			compatible = "regulator-fixed";
> > +			reg = <3>;
> > +			regulator-name = "pci_vdd";
> > +			regulator-min-microvolt = <1050000>;
> > +			regulator-max-microvolt = <1050000>;
> > +			regulator-always-on;
> > +		};
> >  	};
> >  
> >  	sound {
> > -- 
> > 1.7.10.4
> 
> However, PCIe still doesn't work on TrimSlice; the device enumeration
> fails. The log is below:
> 
> > [    0.790425] tegra-pcie 80003000.pcie-controller: link 0 down, retrying
> > [    0.801351] tegra-pcie 80003000.pcie-controller: PCI host bridge to bus 0000:00
> > [    0.808945] pci_bus 0000:00: root bus resource [io  0x82000000-0x8200ffff]
> > [    0.816109] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xafffffff]
> > [    0.823303] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xbfffffff pref]
> > [    0.830893] pci_bus 0000:00: root bus resource [bus 00-ff]
> > [    0.836728] pci 0000:00:01.0: [10de:0bf0] type 01 class 0x060000
> > [    0.843097] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
> > [    0.850047] PCI: bus0: Fast back to back transfers disabled
> > [    0.855853] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
> > [    0.864308] tegra-pcie 80003000.pcie-controller: AXI response decoding error, signature: 10010001
> > [    0.873489] tegra-pcie 80003000.pcie-controller:   FPCI address: fe10010000
> 
> ^^^ For some reason, the config register access fails.
> 
> > [    0.880760] PCI: bus1: Fast back to back transfers enabled
> > [    0.886482] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
> > [    0.893381] pci 0000:00:01.0: PCI bridge to [bus 01]
> > [    0.898577] PCI: enabling device 0000:00:01.0 (0140 -> 0143)
> > [    0.904535] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
> 
> With plain next-20130109, the device enumeration succeeds.

That's very strange. I haven't seen that on my setup. Looks like I need
to dig out the TrimSlice again and debug this. It'll take me a while and
there are plenty of other requested changes already, so if I find a fix
I can roll it into the next version.

Thanks for testing,
Thierry
diff mbox

Patch

diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
index 4b6c486..ebb4c17 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -301,6 +301,18 @@ 
 		};
 	};
 
+	pcie-controller {
+		status = "okay";
+
+		pci@0 {
+			status = "okay";
+		};
+
+		pci@1 {
+			status = "okay";
+		};
+	};
+
 	usb@c5000000 {
 		status = "okay";
 		nvidia,vbus-gpio = <&gpio 170 0>; /* gpio PV2 */
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index 9e8256ab..67090fe 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -145,13 +145,6 @@  static void __init tegra_dt_init(void)
 				tegra20_auxdata_lookup, NULL);
 }
 
-static void __init trimslice_init(void)
-{
-#ifdef CONFIG_TEGRA_PCI
-	platform_device_register(&tegra_pcie_device);
-#endif
-}
-
 static void __init paz00_init(void)
 {
 	tegra_paz00_wifikill_init();
@@ -161,7 +154,6 @@  static struct {
 	char *machine;
 	void (*init)(void);
 } board_init_funcs[] = {
-	{ "compulab,trimslice", trimslice_init },
 	{ "compal,paz00", paz00_init },
 };