@@ -3208,6 +3208,83 @@ reset_complete:
return 0;
}
+/*
+ * Device-specific reset method for Chelsio T4-based adapters.
+ */
+static int reset_chelsio_generic_dev(struct pci_dev *dev, int probe)
+{
+ u16 old_command;
+ u16 msix_flags;
+
+ /*
+ * If this isn't a Chelsio T4-based device, return -ENOTTY indicating
+ * that we have no device-specific reset method.
+ */
+ if ((dev->device & 0xf000) != 0x4000)
+ return -ENOTTY;
+
+ /*
+ * If this is the "probe" phase, return 0 indicating that we can
+ * reset this device.
+ */
+ if (probe)
+ return 0;
+
+ /*
+ * T4 can wedge if their are DMAs in flight within the chip and Bus
+ * master has been disabled. We need to have it on till the Function
+ * Level Reset completes. (BUS_MASTER is disabled in
+ * pci_reset_function()).
+ */
+ pci_read_config_word(dev, PCI_COMMAND, &old_command);
+ pci_write_config_word(dev, PCI_COMMAND,
+ old_command | PCI_COMMAND_MASTER);
+
+ /*
+ * Perform the actual device function reset, saving and restoring
+ * configuration information around the reset.
+ */
+ pci_save_state(dev);
+
+ /*
+ * T4 also suffers a Head-Of-Line blocking problem if MSI-X interrupts
+ * are disabled when an MSI-X interrupt message needs to be delivered.
+ * So we briefly re-enable MSI-X interrupts for the duration of the
+ * FLR. The pci_restore_state() below will restore the original
+ * MSI-X state.
+ */
+ pci_read_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS, &msix_flags);
+ if ((msix_flags & PCI_MSIX_FLAGS_ENABLE) == 0)
+ pci_write_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS,
+ msix_flags |
+ PCI_MSIX_FLAGS_ENABLE |
+ PCI_MSIX_FLAGS_MASKALL);
+
+ /*
+ * Start of pcie_flr() code sequence. This reset code is a copy of
+ * the guts of pcie_flr() because that's not an exported function.
+ */
+
+ if (!pci_wait_for_pending_transaction(dev))
+ dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n");
+
+ pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR);
+ msleep(100);
+
+ /*
+ * End of pcie_flr() code sequence.
+ */
+
+ /*
+ * Restore the configuration information (BAR values, etc.) including
+ * the original PCI Configuration Space Command word, and return
+ * success.
+ */
+ pci_restore_state(dev);
+ pci_write_config_word(dev, PCI_COMMAND, old_command);
+ return 0;
+}
+
#define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed
#define PCI_DEVICE_ID_INTEL_IVB_M_VGA 0x0156
#define PCI_DEVICE_ID_INTEL_IVB_M2_VGA 0x0166
@@ -3221,6 +3298,8 @@ static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
reset_ivb_igd },
{ PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
reset_intel_generic_dev },
+ { PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
+ reset_chelsio_generic_dev },
{ 0 }
};