[v3] pcie: Add Xilinx PCIe Host Bridge IP driver

Commit Message

Srikanth Thokala April 15, 2014, 11:38 a.m. UTC

This is the driver for Xilinx AXI PCIe Host Bridge Soft IP

Signed-off-by: Srikanth Thokala <[e-mail]>
---
Changes in v3:
- Rebased on v3.15.0-rc1
- Added support for interrupt-map DT functionality.
- Removed map_irq() wrapper, instead using of_irq_parse_and_map_pci().
- Modified resource mapping logic as per the series
  "PCI: ARM: add support for generic PCI host controller"
- Modified devicetree binding documentation to update with interrupt-
  map properties.
- Use devm calls wherever applicable.
- Fixed minor comments from Jason
- Thanks Jason for the review and suggestions.

Changes in v2:
- Rebased on v3.14.0-rc8
- Removed IP specific DT properties like include-rc, axibar-num etc.,
  as suggested by Jason and Bjorn, Thanks
---
 .../devicetree/bindings/pci/xilinx-pcie.txt        |   62 ++
 drivers/pci/host/Kconfig                           |    7 +
 drivers/pci/host/Makefile                          |    1 +
 drivers/pci/host/pci-xilinx.c                      |  999 ++++++++++++++++++++
 4 files changed, 1069 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/xilinx-pcie.txt
 create mode 100644 drivers/pci/host/pci-xilinx.c

Comments

Srikanth Thokala April 23, 2014, 2:33 p.m. UTC | #1

Hi,

Kindly review the driver and please let me know if you have any comments.

Thanks
Srikanth

On Tue, Apr 15, 2014 at 5:08 PM, Srikanth Thokala <[e-mail]> wrote:
> This is the driver for Xilinx AXI PCIe Host Bridge Soft IP
>
> Signed-off-by: Srikanth Thokala <[e-mail]>
> ---
> Changes in v3:
> - Rebased on v3.15.0-rc1
> - Added support for interrupt-map DT functionality.
> - Removed map_irq() wrapper, instead using of_irq_parse_and_map_pci().
> - Modified resource mapping logic as per the series
>   "PCI: ARM: add support for generic PCI host controller"
> - Modified devicetree binding documentation to update with interrupt-
>   map properties.
> - Use devm calls wherever applicable.
> - Fixed minor comments from Jason
> - Thanks Jason for the review and suggestions.
>
> Changes in v2:
> - Rebased on v3.14.0-rc8
> - Removed IP specific DT properties like include-rc, axibar-num etc.,
>   as suggested by Jason and Bjorn, Thanks
> ---
>  .../devicetree/bindings/pci/xilinx-pcie.txt        |   62 ++
>  drivers/pci/host/Kconfig                           |    7 +
>  drivers/pci/host/Makefile                          |    1 +
>  drivers/pci/host/pci-xilinx.c                      |  999 ++++++++++++++++++++
>  4 files changed, 1069 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/xilinx-pcie.txt
>  create mode 100644 drivers/pci/host/pci-xilinx.c
>
> diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
> new file mode 100644
> index 0000000..2fb28e0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
> @@ -0,0 +1,62 @@
> +* Xilinx AXI PCIe Root Port Bridge DT description
> +
> +Required properties:
> +- #address-cells: Address representation for root ports, set to <3>
> +- #size-cells: Size representation for root ports, set to <2>
> +- #interrupt-cells: specifies the number of cells needed to encode an
> +       interrupt source. The value must be 1.
> +- compatible: Should contain "xlnx,axi-pcie-host-1.00.a"
> +- reg: Should contain AXI PCIe registers location and length
> +- device_type: must be "pci"
> +- interrupts: Should contain AXI PCIe interrupt
> +- interrupt-map-mask,
> +  interrupt-map: standard PCI properties to define the mapping of the
> +       PCI interface to interrupt numbers.
> +- ranges: ranges for the PCI memory regions (I/O space region is noti
> +       supported by hardware)
> +       Please refer to the standard PCI bus binding document for a more
> +       detailed explanation
> +
> +Optional properties:
> +- bus-range: PCI bus numbers covered
> +
> +Interrupt controller child node
> ++++++++++++++++++++++++++++++++
> +Required properties:
> +- interrupt-controller: identifies the node as an interrupt controller
> +- #address-cells: specifies the number of cells needed to encode an
> +       address. The value must be 0.
> +- #interrupt-cells: specifies the number of cells needed to encode an
> +       interrupt source. The value must be 1.
> +
> +NOTE:
> +The core provides a single interrupt for both INTx/MSI messages. So,
> +created a interrupt controller node to support 'interrupt-map' DT
> +functionality.  The driver will create an IRQ domain for this map, decode
> +the four INTx interrupts in ISR and route them to this domain.
> +
> +
> +Example:
> +++++++++
> +
> +       pci_express: axi-pcie@50000000 {
> +               #address-cells = <3>;
> +               #size-cells = <2>;
> +               #interrupt-cells = <1>;
> +               compatible = "xlnx,axi-pcie-host-1.00.a";
> +               reg = < 0x50000000 0x10000000 >;
> +               device_type = "pci";
> +               interrupts = < 0 52 4 >;
> +               interrupt-map-mask = <0 0 0 7>;
> +               interrupt-map = <0 0 0 1 &pcie_intc 1>,
> +                               <0 0 0 2 &pcie_intc 2>,
> +                               <0 0 0 3 &pcie_intc 3>,
> +                               <0 0 0 4 &pcie_intc 4>;
> +               ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >;
> +
> +               pcie_intc: interrupt-controller {
> +                       interrupt-controller;
> +                       #address-cells = <0>;
> +                       #interrupt-cells = <1>;
> +               }
> +       };
> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> index a6f67ec..71afdcd 100644
> --- a/drivers/pci/host/Kconfig
> +++ b/drivers/pci/host/Kconfig
> @@ -33,4 +33,11 @@ config PCI_RCAR_GEN2
>           There are 3 internal PCI controllers available with a single
>           built-in EHCI/OHCI host controller present on each one.
>
> +config PCI_XILINX
> +       bool "Xilinx AXI PCIe host bridge support"
> +       depends on ARCH_ZYNQ
> +       help
> +         Say 'Y' here if you want kernel to support the Xilinx AXI PCIe
> +         Host Bridge driver.
> +
>  endmenu
> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> index 13fb333..4e9c843 100644
> --- a/drivers/pci/host/Makefile
> +++ b/drivers/pci/host/Makefile
> @@ -4,3 +4,4 @@ obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
>  obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
>  obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
>  obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
> +obj-$(CONFIG_PCI_XILINX) += pci-xilinx.o
> diff --git a/drivers/pci/host/pci-xilinx.c b/drivers/pci/host/pci-xilinx.c
> new file mode 100644
> index 0000000..d9afe66
> --- /dev/null
> +++ b/drivers/pci/host/pci-xilinx.c
> @@ -0,0 +1,999 @@
> +/*
> + * PCIe host controller driver for Xilinx AXI PCIe Bridge
> + *
> + * Copyright (c) 2012 - 2014 Xilinx, Inc.
> + *
> + * Based on the Tegra PCIe driver
> + *
> + * Bits taken from Synopsys Designware Host controller driver and
> + * ARM PCI Host generic driver.
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation, either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/msi.h>
> +#include <linux/of_address.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_irq.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +
> +/* Register definitions */
> +#define XILINX_PCIE_REG_VSECC          0x00000128
> +#define XILINX_PCIE_REG_VSECH          0x0000012c
> +#define XILINX_PCIE_REG_BIR            0x00000130
> +#define XILINX_PCIE_REG_BSCR           0x00000134
> +#define XILINX_PCIE_REG_IDR            0x00000138
> +#define XILINX_PCIE_REG_IMR            0x0000013c
> +#define XILINX_PCIE_REG_BLR            0x00000140
> +#define XILINX_PCIE_REG_PSCR           0x00000144
> +#define XILINX_PCIE_REG_RPSC           0x00000148
> +#define XILINX_PCIE_REG_MSIBASE1       0x0000014c
> +#define XILINX_PCIE_REG_MSIBASE2       0x00000150
> +#define XILINX_PCIE_REG_RPEFR          0x00000154
> +#define XILINX_PCIE_REG_RPIFR1         0x00000158
> +#define XILINX_PCIE_REG_RPIFR2         0x0000015c
> +#define XILINX_PCIE_REG_VSECC2         0x00000200
> +#define XILINX_PCIE_REG_VSECH2         0x00000204
> +
> +/* Interrupt registers definitions */
> +#define XILINX_PCIE_INTR_LINK_DOWN     BIT(0)
> +#define XILINX_PCIE_INTR_ECRC_ERR      BIT(1)
> +#define XILINX_PCIE_INTR_STR_ERR       BIT(2)
> +#define XILINX_PCIE_INTR_HOT_RESET     BIT(3)
> +#define XILINX_PCIE_INTR_CFG_COMPL     GENMASK(7, 5)
> +#define XILINX_PCIE_INTR_CFG_TIMEOUT   BIT(8)
> +#define XILINX_PCIE_INTR_CORRECTABLE   BIT(9)
> +#define XILINX_PCIE_INTR_NONFATAL      BIT(10)
> +#define XILINX_PCIE_INTR_FATAL         BIT(11)
> +#define XILINX_PCIE_INTR_INTX          BIT(16)
> +#define XILINX_PCIE_INTR_MSI           BIT(17)
> +#define XILINX_PCIE_INTR_SLV_UNSUPP    BIT(20)
> +#define XILINX_PCIE_INTR_SLV_UNEXP     BIT(21)
> +#define XILINX_PCIE_INTR_SLV_COMPL     BIT(22)
> +#define XILINX_PCIE_INTR_SLV_ERRP      BIT(23)
> +#define XILINX_PCIE_INTR_SLV_CMPABT    BIT(24)
> +#define XILINX_PCIE_INTR_SLV_ILLBUR    BIT(25)
> +#define XILINX_PCIE_INTR_MST_DECERR    BIT(26)
> +#define XILINX_PCIE_INTR_MST_SLVERR    BIT(27)
> +#define XILINX_PCIE_INTR_MST_ERRP      BIT(28)
> +#define XILINX_PCIE_IMR_ALL_MASK       0x1FF30FED
> +#define XILINX_PCIE_IDR_ALL_MASK       0xFFFFFFFF
> +
> +/* Root Port Error FIFO Read Register definitions */
> +#define XILINX_PCIE_RPEFR_ERR_VALID    BIT(18)
> +#define XILINX_PCIE_RPEFR_REQ_ID       GENMASK(15, 0)
> +#define XILINX_PCIE_RPEFR_ALL_MASK     0xFFFFFFFF
> +
> +/* Root Port Interrupt FIFO Read Register 1 definitions */
> +#define XILINX_PCIE_RPIFR1_INTR_VALID  BIT(31)
> +#define XILINX_PCIE_RPIFR1_MSI_INTR    BIT(30)
> +#define XILINX_PCIE_RPIFR1_INTR_ASSRT  BIT(29)
> +#define XILINX_PCIE_RPIFR1_INTR_MASK   GENMASK(28, 27)
> +#define XILINX_PCIE_RPIFR1_MSI_ADR_MASK        GENMASK(26, 16)
> +#define XILINX_PCIE_RPIFR1_ALL_MASK    0xFFFFFFFF
> +#define XILINX_PCIE_RPIFR1_INTR_SHIFT          27
> +#define XILINX_PCIE_RPIFR1_MSI_ADR_SHIFT       16
> +
> +/* Bridge Info Register definitions */
> +#define XILINX_PCIE_BIR_ECAM_SZ_MASK   GENMASK(18, 16)
> +#define XILINX_PCIE_BIR_ECAM_SZ_SHIFT  16
> +
> +/* Root Port Interrupt FIFO Read Register 2 definitions */
> +#define XILINX_PCIE_RPIFR2_MSG_DATA    GENMASK(15, 0)
> +
> +/* Root Port Status/control Register definitions */
> +#define XILINX_PCIE_REG_RPSC_BEN       BIT(0)
> +
> +/* Phy Status/Control Register definitions */
> +#define XILINX_PCIE_REG_PSCR_LNKUP     BIT(11)
> +
> +/* ECAM definitions */
> +#define ECAM_BUS_NUM_SHIFT             20
> +#define ECAM_DEV_NUM_SHIFT             12
> +
> +/* PCI Configuration space Bus Number Register definitions */
> +#define PCI_SECONDARY_BUS_NUM_SHIFT    8
> +#define PCI_SUBORDINATE_BUS_NUM_SHIFT  16
> +#define PCI_LATENCY_TIMER_MASK         GENMASK(31, 24)
> +
> +/* Number of MSI IRQs */
> +#define XILINX_NUM_MSI_IRQS            128
> +
> +/* Number of Memory Resources */
> +#define XILINX_MAX_NUM_RESOURCES       3
> +
> +/**
> + * struct xilinx_pcie_port - PCIe port information
> + * @reg_base: IO Mapped Register Base
> + * @irq: Interrupt number
> + * @msg_addr: MSI message address
> + * @root_busno: Root Bus number
> + * @link_up: Link status flag
> + * @dev: Device pointer
> + * @irq_domain: IRQ domain pointer
> + */
> +struct xilinx_pcie_port {
> +       void __iomem *reg_base;
> +       u32 irq;
> +       unsigned long msg_addr;
> +       u8 root_busno;
> +       bool link_up;
> +       struct device *dev;
> +       struct irq_domain *irq_domain;
> +};
> +
> +static DECLARE_BITMAP(msi_irq_in_use, XILINX_NUM_MSI_IRQS);
> +
> +static inline struct xilinx_pcie_port *sys_to_pcie(struct pci_sys_data *sys)
> +{
> +       return sys->private_data;
> +}
> +
> +static inline u32 pcie_read(struct xilinx_pcie_port *port, u32 reg)
> +{
> +       return readl(port->reg_base + reg);
> +}
> +
> +static inline void pcie_write(struct xilinx_pcie_port *port,
> +                             u32 val, u32 reg)
> +{
> +       writel(val, port->reg_base + reg);
> +}
> +
> +static inline bool xilinx_pcie_is_link_up(struct xilinx_pcie_port *port)
> +{
> +       return (pcie_read(port, XILINX_PCIE_REG_PSCR) &
> +               XILINX_PCIE_REG_PSCR_LNKUP) ? 1 : 0;
> +}
> +
> +/**
> + * xilinx_pcie_clear_err_interrupts - Clear Error Interrupts
> + * @port: PCIe port information
> + */
> +static inline void
> +xilinx_pcie_clear_err_interrupts(struct xilinx_pcie_port *port)
> +{
> +       u32 val = pcie_read(port, XILINX_PCIE_REG_RPEFR);
> +
> +       if (val & XILINX_PCIE_RPEFR_ERR_VALID) {
> +               dev_dbg(port->dev, "Requester ID %d\n",
> +                       val & XILINX_PCIE_RPEFR_REQ_ID);
> +               pcie_write(port, XILINX_PCIE_RPEFR_ALL_MASK,
> +                          XILINX_PCIE_REG_RPEFR);
> +       }
> +}
> +
> +/**
> + * xilinx_pcie_verify_config - Verify configuration
> + * @bus: Bus structure of current bus
> + * @devfn: device/function
> + *
> + * Return: 0 on success and PCIBIOS_DEVICE_NOT_FOUND on error
> + */
> +static int xilinx_pcie_verify_config(struct pci_bus *bus,
> +                                    unsigned int devfn)
> +{
> +       struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
> +
> +       /* Check if link is up when trying to access downstream ports */
> +       if (bus->number != port->root_busno)
> +               if (!xilinx_pcie_is_link_up(port))
> +                       return 0;
> +
> +       /* Only one device down on each root port */
> +       if (bus->number == port->root_busno && devfn > 0)
> +               return 0;
> +
> +       /*
> +        * Do not read more than one device on the bus directly attached
> +        * to RC.
> +        */
> +       if (bus->primary == port->root_busno && devfn > 0)
> +               return 0;
> +
> +       return 1;
> +}
> +
> +/**
> + * xilinx_pcie_get_config_base - Get configuration base
> + * @bus: Bus structure of current bus
> + * @devfn: Device/function
> + * @where: Offset from base
> + *
> + * Return: Base address of the configuration space needed to be
> + *        accessed.
> + */
> +static void __iomem *xilinx_pcie_get_config_base(struct pci_bus *bus,
> +                                                unsigned int devfn,
> +                                                int where)
> +{
> +       struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
> +       int relbus;
> +
> +       relbus = (bus->number << ECAM_BUS_NUM_SHIFT) |
> +                (devfn << ECAM_DEV_NUM_SHIFT);
> +
> +       return port->reg_base + relbus + where;
> +}
> +
> +/**
> + * xilinx_pcie_read_config - Read configuration space
> + * @bus: Bus structure of current bus
> + * @devfn: Device/function
> + * @where: Offset from base
> + * @size: Byte/word/dword
> + * @val: Value to be read
> + *
> + * Return: PCIBIOS_SUCCESSFUL on success
> + *        EINVAL/PCIBIOS_DEVICE_NOT_FOUND/PCIBIOS_BAD_REGISTER_NUMBER
> + *        on failure.
> + */
> +static int xilinx_pcie_read_config(struct pci_bus *bus,
> +                                  unsigned int devfn, int where,
> +                                  int size, u32 *val)
> +{
> +       struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
> +       void __iomem *addr;
> +
> +       if (!port) {
> +               BUG();
> +               return -EINVAL;
> +       }
> +
> +       if (!xilinx_pcie_verify_config(bus, devfn)) {
> +               *val = 0xFFFFFFFF;
> +               return PCIBIOS_DEVICE_NOT_FOUND;
> +       }
> +
> +       addr = xilinx_pcie_get_config_base(bus, devfn, where);
> +
> +       switch (size) {
> +       case 1:
> +               *val = readb(addr);
> +               break;
> +       case 2:
> +               *val = readw(addr);
> +               break;
> +       default:
> +               *val = readl(addr);
> +               break;
> +       }
> +
> +       return PCIBIOS_SUCCESSFUL;
> +}
> +
> +/**
> + * xilinx_pcie_write_config - Write configuration space
> + * @bus: Bus structure of current bus
> + * @devfn: Device/function
> + * @where: Offset from base
> + * @size: Byte/word/dword
> + * @val: Value to be written to device
> + *
> + * Return: PCIBIOS_SUCCESSFUL on success,
> + *        EINVAL/PCIBIOS_DEVICE_NOT_FOUND/PCIBIOS_BAD_REGISTER_NUMBER
> + *        on failure.
> + */
> +static int xilinx_pcie_write_config(struct pci_bus *bus,
> +                                   unsigned int devfn, int where,
> +                                   int size, u32 val)
> +{
> +       struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
> +       void __iomem *addr;
> +
> +       if (!port) {
> +               BUG();
> +               return -EINVAL;
> +       }
> +
> +       if (!xilinx_pcie_verify_config(bus, devfn))
> +               return PCIBIOS_DEVICE_NOT_FOUND;
> +
> +       addr = xilinx_pcie_get_config_base(bus, devfn, where);
> +
> +       switch (size) {
> +       case 1:
> +               writeb(val, addr);
> +               break;
> +       case 2:
> +               writew(val, addr);
> +               break;
> +       default:
> +               writel(val, addr);
> +               break;
> +       }
> +
> +       return PCIBIOS_SUCCESSFUL;
> +}
> +
> +/* PCIe operations */
> +static struct pci_ops xilinx_pcie_ops = {
> +       .read  = xilinx_pcie_read_config,
> +       .write = xilinx_pcie_write_config,
> +};
> +
> +/* MSI functions */
> +
> +/**
> + * xilinx_pcie_destroy_msi - Free MSI number
> + * @irq: IRQ to be freed
> + */
> +static void xilinx_pcie_destroy_msi(unsigned int irq)
> +{
> +       struct irq_desc *desc;
> +       struct msi_desc *msi;
> +       struct xilinx_pcie_port *port;
> +
> +       desc = irq_to_desc(irq);
> +       msi = irq_desc_get_msi_desc(desc);
> +       port = sys_to_pcie(msi->dev->bus->sysdata);
> +       if (!port) {
> +               BUG();
> +               return;
> +       }
> +
> +       if (!test_bit(irq, msi_irq_in_use))
> +               dev_err(port->dev, "Trying to free unused MSI#%d\n", irq);
> +       else
> +               clear_bit(irq, msi_irq_in_use);
> +}
> +
> +/**
> + * xilinx_pcie_assign_msi - Allocate MSI number
> + * @port: PCIe port structure
> + *
> + * Return: A valid IRQ on success and error value on failure.
> + */
> +static int xilinx_pcie_assign_msi(struct xilinx_pcie_port *port)
> +{
> +       int pos;
> +
> +       pos = find_first_zero_bit(msi_irq_in_use, XILINX_NUM_MSI_IRQS);
> +       if (pos < XILINX_NUM_MSI_IRQS)
> +               set_bit(pos, msi_irq_in_use);
> +       else
> +               return -ENOSPC;
> +
> +       return irq_find_mapping(port->irq_domain, pos);
> +}
> +
> +/**
> + * xilinx_msi_teardown_irq - Destroy the MSI
> + * @chip: MSI Chip descriptor
> + * @irq: MSI IRQ to destroy
> + */
> +static void xilinx_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
> +{
> +       xilinx_pcie_destroy_msi(irq);
> +}
> +
> +/**
> + * xilinx_pcie_msi_setup_irq - Setup MSI request
> + * @chip: MSI chip pointer
> + * @pdev: PCIe device pointer
> + * @desc: MSI descriptor pointer
> + *
> + * Return: '0' on success and error value on failure
> + */
> +static int xilinx_pcie_msi_setup_irq(struct msi_chip *chip,
> +                                    struct pci_dev *pdev,
> +                                    struct msi_desc *desc)
> +{
> +       struct xilinx_pcie_port *port = sys_to_pcie(pdev->bus->sysdata);
> +       int irq;
> +       struct msi_msg msg;
> +
> +       if (!port) {
> +               BUG();
> +               return -EINVAL;
> +       }
> +
> +       irq = xilinx_pcie_assign_msi(port);
> +       if (irq < 0)
> +               return irq;
> +
> +       irq_set_msi_desc(irq, desc);
> +
> +       msg.address_hi = 0;
> +       msg.address_lo = virt_to_phys((void *)port->msg_addr);
> +       msg.data = irq;
> +
> +       write_msi_msg(irq, &msg);
> +
> +       return 0;
> +}
> +
> +/* MSI Chip Descriptor */
> +static struct msi_chip xilinx_pcie_msi_chip = {
> +       .setup_irq = xilinx_pcie_msi_setup_irq,
> +       .teardown_irq = xilinx_msi_teardown_irq,
> +};
> +
> +/* HW Interrupt Chip Descriptor */
> +static struct irq_chip xilinx_msi_irq_chip = {
> +       .name = "Xilinx PCIe MSI",
> +       .irq_enable = unmask_msi_irq,
> +       .irq_disable = mask_msi_irq,
> +       .irq_mask = mask_msi_irq,
> +       .irq_unmask = unmask_msi_irq,
> +};
> +
> +/**
> + * xilinx_pcie_msi_map - Set the handler for the MSI and mark IRQ as valid
> + * @domain: IRQ domain
> + * @irq: Virtual IRQ number
> + * @hwirq: HW interrupt number
> + *
> + * Return: Always returns 0.
> + */
> +static int xilinx_pcie_msi_map(struct irq_domain *domain, unsigned int irq,
> +                              irq_hw_number_t hwirq)
> +{
> +       irq_set_chip_and_handler(irq, &xilinx_msi_irq_chip, handle_simple_irq);
> +       irq_set_chip_data(irq, domain->host_data);
> +       set_irq_flags(irq, IRQF_VALID);
> +
> +       return 0;
> +}
> +
> +/* IRQ Domain operations */
> +static const struct irq_domain_ops msi_domain_ops = {
> +       .map = xilinx_pcie_msi_map,
> +};
> +
> +/**
> + * xilinx_pcie_enable_msi - Enable MSI support
> + * @port: PCIe port information
> + */
> +static void xilinx_pcie_enable_msi(struct xilinx_pcie_port *port)
> +{
> +       port->msg_addr = __get_free_pages(GFP_KERNEL, 0);
> +
> +       pcie_write(port, 0x0, XILINX_PCIE_REG_MSIBASE1);
> +       pcie_write(port, virt_to_phys((void *)port->msg_addr),
> +                  XILINX_PCIE_REG_MSIBASE2);
> +}
> +
> +/**
> + * xilinx_pcie_add_bus - Add MSI chip info to PCIe bus
> + * @bus: PCIe bus
> + */
> +static void xilinx_pcie_add_bus(struct pci_bus *bus)
> +{
> +       if (IS_ENABLED(CONFIG_PCI_MSI)) {
> +               struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
> +
> +               if (!port)
> +                       return;
> +
> +               xilinx_pcie_msi_chip.dev = port->dev;
> +               bus->msi = &xilinx_pcie_msi_chip;
> +       }
> +}
> +
> +/* INTx Functions */
> +
> +/**
> + * xilinx_pcie_intx_map - Set the handler for the INTx and mark IRQ as valid
> + * @domain: IRQ domain
> + * @irq: Virtual IRQ number
> + * @hwirq: HW interrupt number
> + *
> + * Return: Always returns 0.
> + */
> +static int xilinx_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
> +                               irq_hw_number_t hwirq)
> +{
> +       irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);
> +       irq_set_chip_data(irq, domain->host_data);
> +       set_irq_flags(irq, IRQF_VALID);
> +
> +       return 0;
> +}
> +
> +/* INTx IRQ Domain operations */
> +static const struct irq_domain_ops intx_domain_ops = {
> +       .map = xilinx_pcie_intx_map,
> +};
> +
> +/* PCIe HW Functions */
> +
> +/**
> + * xilinx_pcie_intr_handler - Interrupt Service Handler
> + * @irq: IRQ number
> + * @data: PCIe port information
> + *
> + * Return: IRQ_HANDLED on success and IRQ_NONE on failure
> + */
> +static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data)
> +{
> +       struct xilinx_pcie_port *port = (struct xilinx_pcie_port *)data;
> +       u32 val, mask, status, msi_data;
> +
> +       /* Read interrupt decode and mask registers */
> +       val = pcie_read(port, XILINX_PCIE_REG_IDR);
> +       mask = pcie_read(port, XILINX_PCIE_REG_IMR);
> +
> +       status = val & mask;
> +       if (!status)
> +               return IRQ_NONE;
> +
> +       if (status & XILINX_PCIE_INTR_LINK_DOWN)
> +               dev_warn(port->dev, "Link Down\n");
> +
> +       if (status & XILINX_PCIE_INTR_ECRC_ERR)
> +               dev_warn(port->dev, "ECRC failed\n");
> +
> +       if (status & XILINX_PCIE_INTR_STR_ERR)
> +               dev_warn(port->dev, "Streaming error\n");
> +
> +       if (status & XILINX_PCIE_INTR_HOT_RESET)
> +               dev_info(port->dev, "Hot reset\n");
> +
> +       if (status & XILINX_PCIE_INTR_CFG_TIMEOUT)
> +               dev_warn(port->dev, "ECAM access timeout\n");
> +
> +       if (status & XILINX_PCIE_INTR_CORRECTABLE) {
> +               dev_warn(port->dev, "Correctable error message\n");
> +               xilinx_pcie_clear_err_interrupts(port);
> +       }
> +
> +       if (status & XILINX_PCIE_INTR_NONFATAL) {
> +               dev_warn(port->dev, "Non fatal error message\n");
> +               xilinx_pcie_clear_err_interrupts(port);
> +       }
> +
> +       if (status & XILINX_PCIE_INTR_FATAL) {
> +               dev_warn(port->dev, "Fatal error message\n");
> +               xilinx_pcie_clear_err_interrupts(port);
> +       }
> +
> +       if (status & XILINX_PCIE_INTR_INTX) {
> +               /* INTx interrupt received */
> +               val = pcie_read(port, XILINX_PCIE_REG_RPIFR1);
> +
> +               /* Check whether interrupt valid */
> +               if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) {
> +                       dev_warn(port->dev, "RP Intr FIFO1 read error\n");
> +                       return IRQ_HANDLED;
> +               }
> +
> +               /* Clear interrupt FIFO register 1 */
> +               pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK,
> +                          XILINX_PCIE_REG_RPIFR1);
> +
> +               /* Handle INTx Interrupt */
> +               val = ((val & XILINX_PCIE_RPIFR1_INTR_MASK) >>
> +                       XILINX_PCIE_RPIFR1_INTR_SHIFT) + 1;
> +               generic_handle_irq(irq_find_mapping(port->irq_domain, val));
> +       }
> +
> +       if (status & XILINX_PCIE_INTR_MSI) {
> +               /* MSI Interrupt */
> +               val = pcie_read(port, XILINX_PCIE_REG_RPIFR1);
> +
> +               if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) {
> +                       dev_warn(port->dev, "RP Intr FIFO1 read error\n");
> +                       return IRQ_HANDLED;
> +               }
> +
> +               if (val & XILINX_PCIE_RPIFR1_MSI_INTR) {
> +                       msi_data = pcie_read(port, XILINX_PCIE_REG_RPIFR2) &
> +                                  XILINX_PCIE_RPIFR2_MSG_DATA;
> +
> +                       /* Clear interrupt FIFO register 1 */
> +                       pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK,
> +                                  XILINX_PCIE_REG_RPIFR1);
> +
> +                       if (IS_ENABLED(CONFIG_PCI_MSI)) {
> +                               /* Handle MSI Interrupt */
> +                               generic_handle_irq(msi_data);
> +                       }
> +               }
> +       }
> +
> +       if (status & XILINX_PCIE_INTR_SLV_UNSUPP)
> +               dev_warn(port->dev, "Slave unsupported request\n");
> +
> +       if (status & XILINX_PCIE_INTR_SLV_UNEXP)
> +               dev_warn(port->dev, "Slave unexpected completion\n");
> +
> +       if (status & XILINX_PCIE_INTR_SLV_COMPL)
> +               dev_warn(port->dev, "Slave completion timeout\n");
> +
> +       if (status & XILINX_PCIE_INTR_SLV_ERRP)
> +               dev_warn(port->dev, "Slave Error Poison\n");
> +
> +       if (status & XILINX_PCIE_INTR_SLV_CMPABT)
> +               dev_warn(port->dev, "Slave Completer Abort\n");
> +
> +       if (status & XILINX_PCIE_INTR_SLV_ILLBUR)
> +               dev_warn(port->dev, "Slave Illegal Burst\n");
> +
> +       if (status & XILINX_PCIE_INTR_MST_DECERR)
> +               dev_warn(port->dev, "Master decode error\n");
> +
> +       if (status & XILINX_PCIE_INTR_MST_SLVERR)
> +               dev_warn(port->dev, "Master slave error\n");
> +
> +       if (status & XILINX_PCIE_INTR_MST_ERRP)
> +               dev_warn(port->dev, "Master error poison\n");
> +
> +       /* Clear the Interrupt Decode register */
> +       pcie_write(port, status, XILINX_PCIE_REG_IDR);
> +
> +       return IRQ_HANDLED;
> +}
> +
> +/**
> + * xilinx_pcie_free_irq_domain - Free IRQ domain
> + * @port: PCIe port information
> + */
> +static void xilinx_pcie_free_irq_domain(struct xilinx_pcie_port *port)
> +{
> +       int i;
> +       u32 irq, num_irqs;
> +
> +       /* Free IRQ Domain */
> +       if (IS_ENABLED(CONFIG_PCI_MSI)) {
> +               free_pages(port->msg_addr, 0);
> +
> +               num_irqs = XILINX_NUM_MSI_IRQS;
> +       } else {
> +               /* INTx */
> +               num_irqs = 4;
> +       }
> +
> +       for (i = 0; i < num_irqs; i++) {
> +               irq = irq_find_mapping(port->irq_domain, i);
> +               if (irq > 0)
> +                       irq_dispose_mapping(irq);
> +       }
> +
> +       irq_domain_remove(port->irq_domain);
> +}
> +
> +/**
> + * xilinx_pcie_init_irq_domain - Initialize IRQ domain
> + * @port: PCIe port information
> + *
> + * Return: '0' on success and error value on failure
> + */
> +static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port)
> +{
> +       struct device *dev = port->dev;
> +       struct device_node *node = dev->of_node;
> +
> +       if (IS_ENABLED(CONFIG_PCI_MSI)) {
> +               /* Setup MSI */
> +               int i;
> +
> +               port->irq_domain = irq_domain_add_linear(node,
> +                                                        XILINX_NUM_MSI_IRQS,
> +                                                        &msi_domain_ops,
> +                                                        &xilinx_pcie_msi_chip);
> +               if (!port->irq_domain) {
> +                       dev_err(dev, "Failed to get a MSI IRQ domain\n");
> +                       return PTR_ERR(port->irq_domain);
> +               }
> +
> +               for (i = 0; i < XILINX_NUM_MSI_IRQS; i++)
> +                       irq_create_mapping(port->irq_domain, i);
> +
> +               xilinx_pcie_enable_msi(port);
> +       } else {
> +               /* Setup INTx */
> +               struct device_node *pcie_intc_node =
> +                                of_get_next_child(node, NULL);
> +
> +               if (!pcie_intc_node) {
> +                       dev_err(dev, "No PCIe Intc node found\n");
> +                       return PTR_ERR(pcie_intc_node);
> +               }
> +
> +               port->irq_domain = irq_domain_add_linear(pcie_intc_node, 4,
> +                                                        &intx_domain_ops,
> +                                                        port);
> +               if (!port->irq_domain) {
> +                       dev_err(dev, "Failed to get a INTx IRQ domain\n");
> +                       return PTR_ERR(port->irq_domain);
> +               }
> +       }
> +
> +       return 0;
> +}
> +
> +/**
> + * xilinx_pcie_init_port - Initialize hardware
> + * @port: PCIe port information
> + */
> +static void xilinx_pcie_init_port(struct xilinx_pcie_port *port)
> +{
> +       /* Check if PCIe link is up? */
> +       port->link_up = xilinx_pcie_is_link_up(port);
> +       if (!port->link_up)
> +               dev_info(port->dev, "PCIe Link is DOWN\n");
> +       else
> +               dev_info(port->dev, "PCIe Link is UP\n");
> +
> +       /* Disable all interrupts*/
> +       pcie_write(port, ~XILINX_PCIE_IDR_ALL_MASK,
> +                  XILINX_PCIE_REG_IMR);
> +
> +       /* Clear pending interrupts */
> +       pcie_write(port, pcie_read(port, XILINX_PCIE_REG_IDR) &
> +                        XILINX_PCIE_IMR_ALL_MASK,
> +                  XILINX_PCIE_REG_IDR);
> +
> +       /* Enable all interrupts*/
> +       pcie_write(port, XILINX_PCIE_IMR_ALL_MASK, XILINX_PCIE_REG_IMR);
> +
> +       /* Enable the Bridge enable bit */
> +       pcie_write(port, pcie_read(port, XILINX_PCIE_REG_RPSC) |
> +                        XILINX_PCIE_REG_RPSC_BEN,
> +                  XILINX_PCIE_REG_RPSC);
> +}
> +
> +/**
> + * xilinx_pcie_setup - Setup memory resources
> + * @nr: Bus number
> + * @sys: Per controller structure
> + *
> + * Return: '1' on success and error value on failure
> + */
> +static int xilinx_pcie_setup(int nr, struct pci_sys_data *sys)
> +{
> +       struct xilinx_pcie_port *port = sys_to_pcie(sys);
> +       struct device *dev = port->dev;
> +       struct device_node *node = dev->of_node;
> +       struct resource *mem;
> +       resource_size_t offset;
> +       struct of_pci_range_parser parser;
> +       struct of_pci_range range;
> +       struct pci_host_bridge_window *win;
> +       int err = 0, mem_resno = 0;
> +
> +       /* Get the ranges */
> +       if (of_pci_range_parser_init(&parser, node)) {
> +               dev_err(dev, "missing \"ranges\" property\n");
> +               return -EINVAL;
> +       }
> +
> +       /* Parse the ranges and add the resources found to the list */
> +       for_each_of_pci_range(&parser, &range) {
> +
> +               if (mem_resno >= XILINX_MAX_NUM_RESOURCES) {
> +                       dev_err(dev, "Maximum memory resources exceeded\n");
> +                       return -EINVAL;
> +               }
> +
> +               mem = devm_kmalloc(dev, sizeof(*mem), GFP_KERNEL);
> +               if (!mem) {
> +                       err = -ENOMEM;
> +                       goto free_resources;
> +               }
> +
> +               of_pci_range_to_resource(&range, node, mem);
> +
> +               switch (mem->flags & IORESOURCE_TYPE_BITS) {
> +               case IORESOURCE_MEM:
> +                       offset = range.cpu_addr - range.pci_addr;
> +                       mem_resno++;
> +                       break;
> +               default:
> +                       err = -EINVAL;
> +                       break;
> +               }
> +
> +               if (err < 0) {
> +                       dev_warn(dev, "Invalid resource found\n");
> +                       continue;
> +               }
> +
> +               err = request_resource(&iomem_resource, mem);
> +               if (err)
> +                       goto free_resources;
> +
> +               pci_add_resource_offset(&sys->resources, mem, offset);
> +       }
> +
> +       return 1;
> +
> +free_resources:
> +       release_child_resources(&iomem_resource);
> +       list_for_each_entry(win, &sys->resources, list)
> +               devm_kfree(dev, win->res);
> +       pci_free_resource_list(&sys->resources);
> +
> +       return err;
> +}
> +
> +/**
> + * xilinx_pcie_scan_bus - Scan PCIe bus for devices
> + * @nr: Bus number
> + * @sys: Per controller structure
> + *
> + * Return: Valid Bus pointer on success and NULL on failure
> + */
> +static struct pci_bus __init *xilinx_pcie_scan_bus(int nr,
> +                                                  struct pci_sys_data *sys)
> +{
> +       struct xilinx_pcie_port *port = sys_to_pcie(sys);
> +       struct pci_bus *bus;
> +
> +       if (port) {
> +               port->root_busno = sys->busnr;
> +               bus = pci_scan_root_bus(port->dev, sys->busnr, &xilinx_pcie_ops,
> +                                       sys, &sys->resources);
> +       } else {
> +               bus = NULL;
> +               BUG();
> +       }
> +
> +       return bus;
> +}
> +
> +/**
> + * xilinx_pcie_parse_dt - Parse Device tree
> + * @port: PCIe port information
> + *
> + * Return: '0' on success and error value on failure
> + */
> +static int xilinx_pcie_parse_dt(struct xilinx_pcie_port *port)
> +{
> +       struct device *dev = port->dev;
> +       struct device_node *node = dev->of_node;
> +       struct resource regs, busn;
> +       const char *type;
> +       int err;
> +
> +       /* Check for device type */
> +       type = of_get_property(node, "device_type", NULL);
> +       if (!type || strcmp(type, "pci")) {
> +               dev_err(dev, "invalid \"device_type\" %s\n", type);
> +               return -EINVAL;
> +       }
> +
> +       /* Map the register space */
> +       err = of_address_to_resource(node, 0, &regs);
> +       if (err) {
> +               dev_err(dev, "missing \"reg\" property\n");
> +               return err;
> +       }
> +
> +       port->reg_base = devm_ioremap_resource(dev, &regs);
> +       if (IS_ERR(port->reg_base))
> +               return PTR_ERR(port->reg_base);
> +
> +       /* Map IRQ */
> +       port->irq = irq_of_parse_and_map(node, 0);
> +       err = devm_request_irq(dev, port->irq, xilinx_pcie_intr_handler,
> +                              IRQF_SHARED, "xilinx-pcie", port);
> +       if (err) {
> +               dev_err(dev, "unable to request irq %d\n", port->irq);
> +               return err;
> +       }
> +
> +       /* Get the bus range */
> +       if (of_pci_parse_bus_range(node, &busn)) {
> +               u32 val = pcie_read(port, XILINX_PCIE_REG_BIR);
> +               u8 last;
> +
> +               last = (val & XILINX_PCIE_BIR_ECAM_SZ_MASK) >>
> +                       XILINX_PCIE_BIR_ECAM_SZ_SHIFT;
> +
> +               busn = (struct resource) {
> +                       .name   = node->name,
> +                       .start  = 0,
> +                       .end    = last,
> +                       .flags  = IORESOURCE_BUS,
> +               };
> +       }
> +
> +       return 0;
> +}
> +
> +/**
> + * xilinx_pcie_probe - Probe function
> + * @pdev: Platform device pointer
> + *
> + * Return: '0' on success and error value on failure
> + */
> +static int xilinx_pcie_probe(struct platform_device *pdev)
> +{
> +       struct xilinx_pcie_port *port;
> +       struct hw_pci hw;
> +       struct device *dev = &pdev->dev;
> +       int err;
> +
> +       if (!dev->of_node)
> +               return -ENODEV;
> +
> +       port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
> +       if (!port)
> +               return -ENOMEM;
> +
> +       port->dev = dev;
> +
> +       /* Parse the device tree */
> +       err = xilinx_pcie_parse_dt(port);
> +       if (err) {
> +               dev_err(dev, "Parsing DT failed\n");
> +               return err;
> +       }
> +
> +       /* Initialize the hardware */
> +       xilinx_pcie_init_port(port);
> +
> +       /* Setup IRQ Domain */
> +       err = xilinx_pcie_init_irq_domain(port);
> +       if (err) {
> +               dev_err(dev, "Failed creating IRQ Dommain\n");
> +               return err;
> +       }
> +
> +       /* Initialize hw_pci structure */
> +       memset(&hw, 0, sizeof(hw));
> +       hw = (struct hw_pci) {
> +               .nr_controllers = 1,
> +               .private_data   = (void **)&port,
> +               .setup          = xilinx_pcie_setup,
> +               .map_irq        = of_irq_parse_and_map_pci,
> +               .add_bus        = xilinx_pcie_add_bus,
> +               .scan           = xilinx_pcie_scan_bus,
> +               .ops            = &xilinx_pcie_ops,
> +       };
> +
> +       /* Register the device */
> +       pci_common_init_dev(dev, &hw);
> +
> +       platform_set_drvdata(pdev, port);
> +
> +       return 0;
> +}
> +
> +/**
> + * xilinx_pcie_remove - Remove function
> + * @pdev: Platform device pointer
> + *
> + * Return: '0' always
> + */
> +static int xilinx_pcie_remove(struct platform_device *pdev)
> +{
> +       struct xilinx_pcie_port *port = platform_get_drvdata(pdev);
> +
> +       xilinx_pcie_free_irq_domain(port);
> +
> +       return 0;
> +}
> +
> +static struct of_device_id xilinx_pcie_of_match[] = {
> +       { .compatible = "xlnx,axi-pcie-host-1.00.a" ,},
> +       {}
> +};
> +
> +static struct platform_driver xilinx_pcie_driver = {
> +       .driver = {
> +               .name = "xilinx-pcie",
> +               .owner = THIS_MODULE,
> +               .of_match_table = xilinx_pcie_of_match,
> +               .suppress_bind_attrs = true,
> +       },
> +       .probe = xilinx_pcie_probe,
> +       .remove = xilinx_pcie_remove,
> +};
> +module_platform_driver(xilinx_pcie_driver);
> +
> +MODULE_AUTHOR("Xilinx Inc");
> +MODULE_DESCRIPTION("Xilinx AXI PCIe driver");
> +MODULE_LICENSE("GPLv2");
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to [e-mail]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Michal Simek April 30, 2014, 2:19 p.m. UTC | #2

Hi Bjorn,

On 04/15/2014 01:38 PM, Srikanth Thokala wrote:
> This is the driver for Xilinx AXI PCIe Host Bridge Soft IP
> 
> Signed-off-by: Srikanth Thokala <[e-mail]>
> ---
> Changes in v3:
> - Rebased on v3.15.0-rc1
> - Added support for interrupt-map DT functionality.
> - Removed map_irq() wrapper, instead using of_irq_parse_and_map_pci().
> - Modified resource mapping logic as per the series
>   "PCI: ARM: add support for generic PCI host controller"
> - Modified devicetree binding documentation to update with interrupt-
>   map properties.
> - Use devm calls wherever applicable.
> - Fixed minor comments from Jason
> - Thanks Jason for the review and suggestions.
> 
> Changes in v2:
> - Rebased on v3.14.0-rc8
> - Removed IP specific DT properties like include-rc, axibar-num etc.,
>   as suggested by Jason and Bjorn, Thanks
> ---
>  .../devicetree/bindings/pci/xilinx-pcie.txt        |   62 ++
>  drivers/pci/host/Kconfig                           |    7 +
>  drivers/pci/host/Makefile                          |    1 +
>  drivers/pci/host/pci-xilinx.c                      |  999 ++++++++++++++++++++
>  4 files changed, 1069 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/xilinx-pcie.txt
>  create mode 100644 drivers/pci/host/pci-xilinx.c

Any comment on this patch?

Thanks,
Michal

Arnd Bergmann April 30, 2014, 3:34 p.m. UTC | #3

On Tuesday 15 April 2014, Srikanth Thokala wrote:
> +Required properties:
> +- #address-cells: Address representation for root ports, set to <3>
> +- #size-cells: Size representation for root ports, set to <2>
> +- #interrupt-cells: specifies the number of cells needed to encode an
> +	interrupt source. The value must be 1.
> +- compatible: Should contain "xlnx,axi-pcie-host-1.00.a"
> +- reg: Should contain AXI PCIe registers location and length
> +- device_type: must be "pci"
> +- interrupts: Should contain AXI PCIe interrupt
> +- interrupt-map-mask,
> +  interrupt-map: standard PCI properties to define the mapping of the
> +	PCI interface to interrupt numbers.
> +- ranges: ranges for the PCI memory regions (I/O space region is noti

typo: noti -> not

> +	supported by hardware)
> +	Please refer to the standard PCI bus binding document for a more
> +	detailed explanation
> +
> +Optional properties:
> +- bus-range: PCI bus numbers covered
> +
> +Interrupt controller child node
> ++++++++++++++++++++++++++++++++
> +Required properties:
> +- interrupt-controller: identifies the node as an interrupt controller
> +- #address-cells: specifies the number of cells needed to encode an
> +	address. The value must be 0.
> +- #interrupt-cells: specifies the number of cells needed to encode an
> +	interrupt source. The value must be 1.
> +
> +NOTE:
> +The core provides a single interrupt for both INTx/MSI messages. So,
> +created a interrupt controller node to support 'interrupt-map' DT
> +functionality.  The driver will create an IRQ domain for this map, decode
> +the four INTx interrupts in ISR and route them to this domain.

How does this work if the pci core is combined with a GIC version that
also has MSI support. Presumably you'd want to use that for performance
reason rather than the integrated MSI chip.

Shouldn't there be a way to pick between the two?

> +/**
> + * xilinx_pcie_get_config_base - Get configuration base
> + * @bus: Bus structure of current bus
> + * @devfn: Device/function
> + * @where: Offset from base
> + *
> + * Return: Base address of the configuration space needed to be
> + *	   accessed.
> + */
> +static void __iomem *xilinx_pcie_get_config_base(struct pci_bus *bus,
> +						 unsigned int devfn,
> +						 int where)
> +{
> +	struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
> +	int relbus;
> +
> +	relbus = (bus->number << ECAM_BUS_NUM_SHIFT) |
> +		 (devfn << ECAM_DEV_NUM_SHIFT);
> +
> +	return port->reg_base + relbus + where;
> +}

Does this mean you have an ECAM-compliant config space? Nice!

Would it be possible to split the config space access out into
a separate file? It would be nice to share that with the generic
ECAM driver that Will Deacon has sent.

> +
> +	msg.address_hi = 0;
> +	msg.address_lo = virt_to_phys((void *)port->msg_addr);
> +	msg.data = irq;
> +
> +	write_msi_msg(irq, &msg);

It seems strange to pass the msg_addr as an integer referring to
a virtual address. I'd suggest using phys_addr_t for the type
and converting it at the point the page gets allocated, and then
always assigning both the high and low part here. You'll need
that anyway for 64-bit operation.

> +/**
> + * xilinx_pcie_enable_msi - Enable MSI support
> + * @port: PCIe port information
> + */
> +static void xilinx_pcie_enable_msi(struct xilinx_pcie_port *port)
> +{
> +	port->msg_addr = __get_free_pages(GFP_KERNEL, 0);
> +
> +	pcie_write(port, 0x0, XILINX_PCIE_REG_MSIBASE1);
> +	pcie_write(port, virt_to_phys((void *)port->msg_addr),
> +		   XILINX_PCIE_REG_MSIBASE2);
> +}

here too.

As a general comment about the MSI implementation, I wonder if this is actually
generic enough to be shared with other host controllers. It could be moved
into a separate file like the config space access in that case.

> +/**
> + * xilinx_pcie_init_irq_domain - Initialize IRQ domain
> + * @port: PCIe port information
> + *
> + * Return: '0' on success and error value on failure
> + */
> +static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port)
> +{
> +	struct device *dev = port->dev;
> +	struct device_node *node = dev->of_node;
> +
> +	if (IS_ENABLED(CONFIG_PCI_MSI)) {
> +		/* Setup MSI */
> +		int i;
> +
> +		port->irq_domain = irq_domain_add_linear(node,
> +							 XILINX_NUM_MSI_IRQS,
> +							 &msi_domain_ops,
> +							 &xilinx_pcie_msi_chip);
> +		if (!port->irq_domain) {
> +			dev_err(dev, "Failed to get a MSI IRQ domain\n");
> +			return PTR_ERR(port->irq_domain);
> +		}
> +
> +		for (i = 0; i < XILINX_NUM_MSI_IRQS; i++)
> +			irq_create_mapping(port->irq_domain, i);

I'm still not that familiar with the irqdomain code, but shouldn't you
do the irq_create_mapping() in xilinx_pcie_assign_msi()?

It seems wasteful to create all 128 mappings upfront.

> +/**
> + * xilinx_pcie_setup - Setup memory resources
> + * @nr: Bus number
> + * @sys: Per controller structure
> + *
> + * Return: '1' on success and error value on failure
> + */
> +static int xilinx_pcie_setup(int nr, struct pci_sys_data *sys)
> +{

I think if you move most of the code from this function into the probe()
function, it will be easier later to add arm64 support, and you can handle
errors better.

AFAICT, the only thing you need here is to list_move() the resources
from the xilinx_pcie_port to sys->resources. Ideally, the entire range
parsing can go away soon, once we have generic infrastructure for that.


> +	/* Register the device */
> +	pci_common_init_dev(dev, &hw);
> +
> +	platform_set_drvdata(pdev, port);

Don't you have to do the platform_set_drvdata() before pci_common_init_dev()?

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to [e-mail]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Bjorn Helgaas April 30, 2014, 9:41 p.m. UTC | #4

On Tue, Apr 15, 2014 at 05:08:31PM +0530, Srikanth Thokala wrote:
> This is the driver for Xilinx AXI PCIe Host Bridge Soft IP
> 
> Signed-off-by: Srikanth Thokala <[e-mail]>
> ---
> Changes in v3:
> - Rebased on v3.15.0-rc1
> - Added support for interrupt-map DT functionality.
> - Removed map_irq() wrapper, instead using of_irq_parse_and_map_pci().
> - Modified resource mapping logic as per the series
>   "PCI: ARM: add support for generic PCI host controller"
> - Modified devicetree binding documentation to update with interrupt-
>   map properties.
> - Use devm calls wherever applicable.
> - Fixed minor comments from Jason
> - Thanks Jason for the review and suggestions.
> 
> Changes in v2:
> - Rebased on v3.14.0-rc8
> - Removed IP specific DT properties like include-rc, axibar-num etc.,
>   as suggested by Jason and Bjorn, Thanks
> ---
>  .../devicetree/bindings/pci/xilinx-pcie.txt        |   62 ++
>  drivers/pci/host/Kconfig                           |    7 +
>  drivers/pci/host/Makefile                          |    1 +
>  drivers/pci/host/pci-xilinx.c                      |  999 ++++++++++++++++++++
>  4 files changed, 1069 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/xilinx-pcie.txt
>  create mode 100644 drivers/pci/host/pci-xilinx.c
> 
> diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
> new file mode 100644
> index 0000000..2fb28e0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
> @@ -0,0 +1,62 @@
> +* Xilinx AXI PCIe Root Port Bridge DT description
> +
> +Required properties:
> +- #address-cells: Address representation for root ports, set to <3>
> +- #size-cells: Size representation for root ports, set to <2>
> +- #interrupt-cells: specifies the number of cells needed to encode an
> +	interrupt source. The value must be 1.
> +- compatible: Should contain "xlnx,axi-pcie-host-1.00.a"
> +- reg: Should contain AXI PCIe registers location and length
> +- device_type: must be "pci"
> +- interrupts: Should contain AXI PCIe interrupt
> +- interrupt-map-mask,
> +  interrupt-map: standard PCI properties to define the mapping of the
> +	PCI interface to interrupt numbers.
> +- ranges: ranges for the PCI memory regions (I/O space region is noti
> +	supported by hardware)
> +	Please refer to the standard PCI bus binding document for a more
> +	detailed explanation
> +
> +Optional properties:
> +- bus-range: PCI bus numbers covered
> +
> +Interrupt controller child node
> ++++++++++++++++++++++++++++++++
> +Required properties:
> +- interrupt-controller: identifies the node as an interrupt controller
> +- #address-cells: specifies the number of cells needed to encode an
> +	address. The value must be 0.
> +- #interrupt-cells: specifies the number of cells needed to encode an
> +	interrupt source. The value must be 1.
> +
> +NOTE:
> +The core provides a single interrupt for both INTx/MSI messages. So,
> +created a interrupt controller node to support 'interrupt-map' DT
> +functionality.  The driver will create an IRQ domain for this map, decode
> +the four INTx interrupts in ISR and route them to this domain.
> +
> +
> +Example:
> +++++++++
> +
> +	pci_express: axi-pcie@50000000 {
> +		#address-cells = <3>;
> +		#size-cells = <2>;
> +		#interrupt-cells = <1>;
> +		compatible = "xlnx,axi-pcie-host-1.00.a";
> +		reg = < 0x50000000 0x10000000 >;
> +		device_type = "pci";
> +		interrupts = < 0 52 4 >;
> +		interrupt-map-mask = <0 0 0 7>;
> +		interrupt-map = <0 0 0 1 &pcie_intc 1>,
> +				<0 0 0 2 &pcie_intc 2>,
> +				<0 0 0 3 &pcie_intc 3>,
> +				<0 0 0 4 &pcie_intc 4>;
> +		ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >;
> +
> +		pcie_intc: interrupt-controller {
> +			interrupt-controller;
> +			#address-cells = <0>;
> +			#interrupt-cells = <1>;
> +		}
> +	};
> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> index a6f67ec..71afdcd 100644
> --- a/drivers/pci/host/Kconfig
> +++ b/drivers/pci/host/Kconfig
> @@ -33,4 +33,11 @@ config PCI_RCAR_GEN2
>  	  There are 3 internal PCI controllers available with a single
>  	  built-in EHCI/OHCI host controller present on each one.
>  
> +config PCI_XILINX
> +	bool "Xilinx AXI PCIe host bridge support"
> +	depends on ARCH_ZYNQ
> +	help
> +	  Say 'Y' here if you want kernel to support the Xilinx AXI PCIe
> +	  Host Bridge driver.
> +
>  endmenu
> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> index 13fb333..4e9c843 100644
> --- a/drivers/pci/host/Makefile
> +++ b/drivers/pci/host/Makefile
> @@ -4,3 +4,4 @@ obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
>  obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
>  obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
>  obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
> +obj-$(CONFIG_PCI_XILINX) += pci-xilinx.o
> diff --git a/drivers/pci/host/pci-xilinx.c b/drivers/pci/host/pci-xilinx.c
> new file mode 100644
> index 0000000..d9afe66
> --- /dev/null
> +++ b/drivers/pci/host/pci-xilinx.c
> @@ -0,0 +1,999 @@
> +/*
> + * PCIe host controller driver for Xilinx AXI PCIe Bridge
> + *
> + * Copyright (c) 2012 - 2014 Xilinx, Inc.
> + *
> + * Based on the Tegra PCIe driver
> + *
> + * Bits taken from Synopsys Designware Host controller driver and
> + * ARM PCI Host generic driver.
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation, either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/msi.h>
> +#include <linux/of_address.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_irq.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +
> +/* Register definitions */
> +#define XILINX_PCIE_REG_VSECC		0x00000128
> +#define XILINX_PCIE_REG_VSECH		0x0000012c
> +#define XILINX_PCIE_REG_BIR		0x00000130
> +#define XILINX_PCIE_REG_BSCR		0x00000134
> +#define XILINX_PCIE_REG_IDR		0x00000138
> +#define XILINX_PCIE_REG_IMR		0x0000013c
> +#define XILINX_PCIE_REG_BLR		0x00000140
> +#define XILINX_PCIE_REG_PSCR		0x00000144
> +#define XILINX_PCIE_REG_RPSC		0x00000148
> +#define XILINX_PCIE_REG_MSIBASE1	0x0000014c
> +#define XILINX_PCIE_REG_MSIBASE2	0x00000150
> +#define XILINX_PCIE_REG_RPEFR		0x00000154
> +#define XILINX_PCIE_REG_RPIFR1		0x00000158
> +#define XILINX_PCIE_REG_RPIFR2		0x0000015c
> +#define XILINX_PCIE_REG_VSECC2		0x00000200
> +#define XILINX_PCIE_REG_VSECH2		0x00000204
> +
> +/* Interrupt registers definitions */
> +#define XILINX_PCIE_INTR_LINK_DOWN	BIT(0)
> +#define XILINX_PCIE_INTR_ECRC_ERR	BIT(1)
> +#define XILINX_PCIE_INTR_STR_ERR	BIT(2)
> +#define XILINX_PCIE_INTR_HOT_RESET	BIT(3)
> +#define XILINX_PCIE_INTR_CFG_COMPL	GENMASK(7, 5)
> +#define XILINX_PCIE_INTR_CFG_TIMEOUT	BIT(8)
> +#define XILINX_PCIE_INTR_CORRECTABLE	BIT(9)
> +#define XILINX_PCIE_INTR_NONFATAL	BIT(10)
> +#define XILINX_PCIE_INTR_FATAL		BIT(11)
> +#define XILINX_PCIE_INTR_INTX		BIT(16)
> +#define XILINX_PCIE_INTR_MSI		BIT(17)
> +#define XILINX_PCIE_INTR_SLV_UNSUPP	BIT(20)
> +#define XILINX_PCIE_INTR_SLV_UNEXP	BIT(21)
> +#define XILINX_PCIE_INTR_SLV_COMPL	BIT(22)
> +#define XILINX_PCIE_INTR_SLV_ERRP	BIT(23)
> +#define XILINX_PCIE_INTR_SLV_CMPABT	BIT(24)
> +#define XILINX_PCIE_INTR_SLV_ILLBUR	BIT(25)
> +#define XILINX_PCIE_INTR_MST_DECERR	BIT(26)
> +#define XILINX_PCIE_INTR_MST_SLVERR	BIT(27)
> +#define XILINX_PCIE_INTR_MST_ERRP	BIT(28)
> +#define XILINX_PCIE_IMR_ALL_MASK	0x1FF30FED
> +#define XILINX_PCIE_IDR_ALL_MASK	0xFFFFFFFF
> +
> +/* Root Port Error FIFO Read Register definitions */
> +#define XILINX_PCIE_RPEFR_ERR_VALID	BIT(18)
> +#define XILINX_PCIE_RPEFR_REQ_ID	GENMASK(15, 0)
> +#define XILINX_PCIE_RPEFR_ALL_MASK	0xFFFFFFFF
> +
> +/* Root Port Interrupt FIFO Read Register 1 definitions */
> +#define XILINX_PCIE_RPIFR1_INTR_VALID	BIT(31)
> +#define XILINX_PCIE_RPIFR1_MSI_INTR	BIT(30)
> +#define XILINX_PCIE_RPIFR1_INTR_ASSRT	BIT(29)
> +#define XILINX_PCIE_RPIFR1_INTR_MASK	GENMASK(28, 27)
> +#define XILINX_PCIE_RPIFR1_MSI_ADR_MASK	GENMASK(26, 16)
> +#define XILINX_PCIE_RPIFR1_ALL_MASK	0xFFFFFFFF
> +#define XILINX_PCIE_RPIFR1_INTR_SHIFT		27
> +#define XILINX_PCIE_RPIFR1_MSI_ADR_SHIFT	16
> +
> +/* Bridge Info Register definitions */
> +#define XILINX_PCIE_BIR_ECAM_SZ_MASK	GENMASK(18, 16)
> +#define XILINX_PCIE_BIR_ECAM_SZ_SHIFT	16
> +
> +/* Root Port Interrupt FIFO Read Register 2 definitions */
> +#define XILINX_PCIE_RPIFR2_MSG_DATA	GENMASK(15, 0)
> +
> +/* Root Port Status/control Register definitions */
> +#define XILINX_PCIE_REG_RPSC_BEN	BIT(0)
> +
> +/* Phy Status/Control Register definitions */
> +#define XILINX_PCIE_REG_PSCR_LNKUP	BIT(11)
> +
> +/* ECAM definitions */
> +#define ECAM_BUS_NUM_SHIFT		20
> +#define ECAM_DEV_NUM_SHIFT		12
> +
> +/* PCI Configuration space Bus Number Register definitions */
> +#define PCI_SECONDARY_BUS_NUM_SHIFT	8
> +#define PCI_SUBORDINATE_BUS_NUM_SHIFT	16
> +#define PCI_LATENCY_TIMER_MASK		GENMASK(31, 24)
> +
> +/* Number of MSI IRQs */
> +#define XILINX_NUM_MSI_IRQS		128
> +
> +/* Number of Memory Resources */
> +#define XILINX_MAX_NUM_RESOURCES	3
> +
> +/**
> + * struct xilinx_pcie_port - PCIe port information
> + * @reg_base: IO Mapped Register Base
> + * @irq: Interrupt number
> + * @msg_addr: MSI message address
> + * @root_busno: Root Bus number
> + * @link_up: Link status flag
> + * @dev: Device pointer
> + * @irq_domain: IRQ domain pointer
> + */
> +struct xilinx_pcie_port {
> +	void __iomem *reg_base;
> +	u32 irq;
> +	unsigned long msg_addr;
> +	u8 root_busno;
> +	bool link_up;
> +	struct device *dev;
> +	struct irq_domain *irq_domain;
> +};
> +
> +static DECLARE_BITMAP(msi_irq_in_use, XILINX_NUM_MSI_IRQS);
> +
> +static inline struct xilinx_pcie_port *sys_to_pcie(struct pci_sys_data *sys)
> +{
> +	return sys->private_data;
> +}
> +
> +static inline u32 pcie_read(struct xilinx_pcie_port *port, u32 reg)
> +{
> +	return readl(port->reg_base + reg);
> +}
> +
> +static inline void pcie_write(struct xilinx_pcie_port *port,
> +			      u32 val, u32 reg)
> +{
> +	writel(val, port->reg_base + reg);
> +}
> +
> +static inline bool xilinx_pcie_is_link_up(struct xilinx_pcie_port *port)
> +{
> +	return (pcie_read(port, XILINX_PCIE_REG_PSCR) &
> +		XILINX_PCIE_REG_PSCR_LNKUP) ? 1 : 0;
> +}
> +
> +/**
> + * xilinx_pcie_clear_err_interrupts - Clear Error Interrupts
> + * @port: PCIe port information
> + */
> +static inline void
> +xilinx_pcie_clear_err_interrupts(struct xilinx_pcie_port *port)
> +{
> +	u32 val = pcie_read(port, XILINX_PCIE_REG_RPEFR);
> +
> +	if (val & XILINX_PCIE_RPEFR_ERR_VALID) {
> +		dev_dbg(port->dev, "Requester ID %d\n",
> +			val & XILINX_PCIE_RPEFR_REQ_ID);
> +		pcie_write(port, XILINX_PCIE_RPEFR_ALL_MASK,
> +			   XILINX_PCIE_REG_RPEFR);
> +	}
> +}
> +
> +/**
> + * xilinx_pcie_verify_config - Verify configuration
> + * @bus: Bus structure of current bus
> + * @devfn: device/function
> + *
> + * Return: 0 on success and PCIBIOS_DEVICE_NOT_FOUND on error

This comment about the return value doesn't match the code.

> + */
> +static int xilinx_pcie_verify_config(struct pci_bus *bus,
> +				     unsigned int devfn)
> +{
> +	struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
> +
> +	/* Check if link is up when trying to access downstream ports */
> +	if (bus->number != port->root_busno)
> +		if (!xilinx_pcie_is_link_up(port))
> +			return 0;
> +
> +	/* Only one device down on each root port */
> +	if (bus->number == port->root_busno && devfn > 0)
> +		return 0;
> +
> +	/*
> +	 * Do not read more than one device on the bus directly attached
> +	 * to RC.
> +	 */
> +	if (bus->primary == port->root_busno && devfn > 0)
> +		return 0;
> +
> +	return 1;
> +}
> +
> +/**
> + * xilinx_pcie_get_config_base - Get configuration base
> + * @bus: Bus structure of current bus

There's not really a concept of a "current" bus here.  I think these
function comments that repeat what the function and argument names already
tell us are of minimal value.  But I know some people do like them.

> + * @devfn: Device/function
> + * @where: Offset from base
> + *
> + * Return: Base address of the configuration space needed to be
> + *	   accessed.
> + */
> +static void __iomem *xilinx_pcie_get_config_base(struct pci_bus *bus,
> +						 unsigned int devfn,
> +						 int where)
> +{
> +	struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
> +	int relbus;
> +
> +	relbus = (bus->number << ECAM_BUS_NUM_SHIFT) |
> +		 (devfn << ECAM_DEV_NUM_SHIFT);
> +
> +	return port->reg_base + relbus + where;
> +}
> +
> +/**
> + * xilinx_pcie_read_config - Read configuration space
> + * @bus: Bus structure of current bus
> + * @devfn: Device/function
> + * @where: Offset from base
> + * @size: Byte/word/dword
> + * @val: Value to be read
> + *
> + * Return: PCIBIOS_SUCCESSFUL on success
> + *	   EINVAL/PCIBIOS_DEVICE_NOT_FOUND/PCIBIOS_BAD_REGISTER_NUMBER
> + *	   on failure.
> + */
> +static int xilinx_pcie_read_config(struct pci_bus *bus,
> +				   unsigned int devfn, int where,
> +				   int size, u32 *val)
> +{
> +	struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
> +	void __iomem *addr;
> +
> +	if (!port) {
> +		BUG();
> +		return -EINVAL;
> +	}
> +
> +	if (!xilinx_pcie_verify_config(bus, devfn)) {
> +		*val = 0xFFFFFFFF;
> +		return PCIBIOS_DEVICE_NOT_FOUND;
> +	}
> +
> +	addr = xilinx_pcie_get_config_base(bus, devfn, where);
> +
> +	switch (size) {
> +	case 1:
> +		*val = readb(addr);
> +		break;
> +	case 2:
> +		*val = readw(addr);
> +		break;
> +	default:
> +		*val = readl(addr);
> +		break;
> +	}
> +
> +	return PCIBIOS_SUCCESSFUL;
> +}
> +
> +/**
> + * xilinx_pcie_write_config - Write configuration space
> + * @bus: Bus structure of current bus
> + * @devfn: Device/function
> + * @where: Offset from base
> + * @size: Byte/word/dword
> + * @val: Value to be written to device
> + *
> + * Return: PCIBIOS_SUCCESSFUL on success,
> + *	   EINVAL/PCIBIOS_DEVICE_NOT_FOUND/PCIBIOS_BAD_REGISTER_NUMBER
> + *	   on failure.
> + */
> +static int xilinx_pcie_write_config(struct pci_bus *bus,
> +				    unsigned int devfn, int where,
> +				    int size, u32 val)
> +{
> +	struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
> +	void __iomem *addr;
> +
> +	if (!port) {
> +		BUG();
> +		return -EINVAL;
> +	}
> +
> +	if (!xilinx_pcie_verify_config(bus, devfn))
> +		return PCIBIOS_DEVICE_NOT_FOUND;
> +
> +	addr = xilinx_pcie_get_config_base(bus, devfn, where);
> +
> +	switch (size) {
> +	case 1:
> +		writeb(val, addr);
> +		break;
> +	case 2:
> +		writew(val, addr);
> +		break;
> +	default:
> +		writel(val, addr);
> +		break;
> +	}
> +
> +	return PCIBIOS_SUCCESSFUL;
> +}
> +
> +/* PCIe operations */
> +static struct pci_ops xilinx_pcie_ops = {
> +	.read  = xilinx_pcie_read_config,
> +	.write = xilinx_pcie_write_config,
> +};
> +
> +/* MSI functions */
> +
> +/**
> + * xilinx_pcie_destroy_msi - Free MSI number
> + * @irq: IRQ to be freed
> + */
> +static void xilinx_pcie_destroy_msi(unsigned int irq)
> +{
> +	struct irq_desc *desc;
> +	struct msi_desc *msi;
> +	struct xilinx_pcie_port *port;
> +
> +	desc = irq_to_desc(irq);
> +	msi = irq_desc_get_msi_desc(desc);
> +	port = sys_to_pcie(msi->dev->bus->sysdata);
> +	if (!port) {
> +		BUG();
> +		return;
> +	}
> +
> +	if (!test_bit(irq, msi_irq_in_use))
> +		dev_err(port->dev, "Trying to free unused MSI#%d\n", irq);
> +	else
> +		clear_bit(irq, msi_irq_in_use);
> +}
> +
> +/**
> + * xilinx_pcie_assign_msi - Allocate MSI number
> + * @port: PCIe port structure
> + *
> + * Return: A valid IRQ on success and error value on failure.
> + */
> +static int xilinx_pcie_assign_msi(struct xilinx_pcie_port *port)
> +{
> +	int pos;
> +
> +	pos = find_first_zero_bit(msi_irq_in_use, XILINX_NUM_MSI_IRQS);
> +	if (pos < XILINX_NUM_MSI_IRQS)
> +		set_bit(pos, msi_irq_in_use);
> +	else
> +		return -ENOSPC;
> +
> +	return irq_find_mapping(port->irq_domain, pos);
> +}
> +
> +/**
> + * xilinx_msi_teardown_irq - Destroy the MSI
> + * @chip: MSI Chip descriptor
> + * @irq: MSI IRQ to destroy
> + */
> +static void xilinx_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
> +{
> +	xilinx_pcie_destroy_msi(irq);
> +}
> +
> +/**
> + * xilinx_pcie_msi_setup_irq - Setup MSI request
> + * @chip: MSI chip pointer
> + * @pdev: PCIe device pointer
> + * @desc: MSI descriptor pointer
> + *
> + * Return: '0' on success and error value on failure
> + */
> +static int xilinx_pcie_msi_setup_irq(struct msi_chip *chip,
> +				     struct pci_dev *pdev,
> +				     struct msi_desc *desc)
> +{
> +	struct xilinx_pcie_port *port = sys_to_pcie(pdev->bus->sysdata);
> +	int irq;
> +	struct msi_msg msg;
> +
> +	if (!port) {
> +		BUG();
> +		return -EINVAL;
> +	}
> +
> +	irq = xilinx_pcie_assign_msi(port);
> +	if (irq < 0)
> +		return irq;
> +
> +	irq_set_msi_desc(irq, desc);
> +
> +	msg.address_hi = 0;
> +	msg.address_lo = virt_to_phys((void *)port->msg_addr);
> +	msg.data = irq;
> +
> +	write_msi_msg(irq, &msg);
> +
> +	return 0;
> +}
> +
> +/* MSI Chip Descriptor */
> +static struct msi_chip xilinx_pcie_msi_chip = {
> +	.setup_irq = xilinx_pcie_msi_setup_irq,
> +	.teardown_irq = xilinx_msi_teardown_irq,
> +};
> +
> +/* HW Interrupt Chip Descriptor */
> +static struct irq_chip xilinx_msi_irq_chip = {
> +	.name = "Xilinx PCIe MSI",
> +	.irq_enable = unmask_msi_irq,
> +	.irq_disable = mask_msi_irq,
> +	.irq_mask = mask_msi_irq,
> +	.irq_unmask = unmask_msi_irq,
> +};
> +
> +/**
> + * xilinx_pcie_msi_map - Set the handler for the MSI and mark IRQ as valid
> + * @domain: IRQ domain
> + * @irq: Virtual IRQ number
> + * @hwirq: HW interrupt number
> + *
> + * Return: Always returns 0.
> + */
> +static int xilinx_pcie_msi_map(struct irq_domain *domain, unsigned int irq,
> +			       irq_hw_number_t hwirq)
> +{
> +	irq_set_chip_and_handler(irq, &xilinx_msi_irq_chip, handle_simple_irq);
> +	irq_set_chip_data(irq, domain->host_data);
> +	set_irq_flags(irq, IRQF_VALID);
> +
> +	return 0;
> +}
> +
> +/* IRQ Domain operations */
> +static const struct irq_domain_ops msi_domain_ops = {
> +	.map = xilinx_pcie_msi_map,
> +};
> +
> +/**
> + * xilinx_pcie_enable_msi - Enable MSI support
> + * @port: PCIe port information
> + */
> +static void xilinx_pcie_enable_msi(struct xilinx_pcie_port *port)
> +{
> +	port->msg_addr = __get_free_pages(GFP_KERNEL, 0);
> +
> +	pcie_write(port, 0x0, XILINX_PCIE_REG_MSIBASE1);
> +	pcie_write(port, virt_to_phys((void *)port->msg_addr),
> +		   XILINX_PCIE_REG_MSIBASE2);
> +}
> +
> +/**
> + * xilinx_pcie_add_bus - Add MSI chip info to PCIe bus
> + * @bus: PCIe bus
> + */
> +static void xilinx_pcie_add_bus(struct pci_bus *bus)
> +{
> +	if (IS_ENABLED(CONFIG_PCI_MSI)) {
> +		struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
> +
> +		if (!port)
> +			return;
> +
> +		xilinx_pcie_msi_chip.dev = port->dev;
> +		bus->msi = &xilinx_pcie_msi_chip;
> +	}
> +}
> +
> +/* INTx Functions */
> +
> +/**
> + * xilinx_pcie_intx_map - Set the handler for the INTx and mark IRQ as valid
> + * @domain: IRQ domain
> + * @irq: Virtual IRQ number
> + * @hwirq: HW interrupt number
> + *
> + * Return: Always returns 0.
> + */
> +static int xilinx_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
> +				irq_hw_number_t hwirq)
> +{
> +	irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);
> +	irq_set_chip_data(irq, domain->host_data);
> +	set_irq_flags(irq, IRQF_VALID);
> +
> +	return 0;
> +}
> +
> +/* INTx IRQ Domain operations */
> +static const struct irq_domain_ops intx_domain_ops = {
> +	.map = xilinx_pcie_intx_map,
> +};
> +
> +/* PCIe HW Functions */
> +
> +/**
> + * xilinx_pcie_intr_handler - Interrupt Service Handler
> + * @irq: IRQ number
> + * @data: PCIe port information
> + *
> + * Return: IRQ_HANDLED on success and IRQ_NONE on failure
> + */
> +static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data)
> +{
> +	struct xilinx_pcie_port *port = (struct xilinx_pcie_port *)data;
> +	u32 val, mask, status, msi_data;
> +
> +	/* Read interrupt decode and mask registers */
> +	val = pcie_read(port, XILINX_PCIE_REG_IDR);
> +	mask = pcie_read(port, XILINX_PCIE_REG_IMR);
> +
> +	status = val & mask;
> +	if (!status)
> +		return IRQ_NONE;
> +
> +	if (status & XILINX_PCIE_INTR_LINK_DOWN)
> +		dev_warn(port->dev, "Link Down\n");
> +
> +	if (status & XILINX_PCIE_INTR_ECRC_ERR)
> +		dev_warn(port->dev, "ECRC failed\n");
> +
> +	if (status & XILINX_PCIE_INTR_STR_ERR)
> +		dev_warn(port->dev, "Streaming error\n");
> +
> +	if (status & XILINX_PCIE_INTR_HOT_RESET)
> +		dev_info(port->dev, "Hot reset\n");
> +
> +	if (status & XILINX_PCIE_INTR_CFG_TIMEOUT)
> +		dev_warn(port->dev, "ECAM access timeout\n");
> +
> +	if (status & XILINX_PCIE_INTR_CORRECTABLE) {
> +		dev_warn(port->dev, "Correctable error message\n");
> +		xilinx_pcie_clear_err_interrupts(port);
> +	}
> +
> +	if (status & XILINX_PCIE_INTR_NONFATAL) {
> +		dev_warn(port->dev, "Non fatal error message\n");
> +		xilinx_pcie_clear_err_interrupts(port);
> +	}
> +
> +	if (status & XILINX_PCIE_INTR_FATAL) {
> +		dev_warn(port->dev, "Fatal error message\n");
> +		xilinx_pcie_clear_err_interrupts(port);
> +	}
> +
> +	if (status & XILINX_PCIE_INTR_INTX) {
> +		/* INTx interrupt received */
> +		val = pcie_read(port, XILINX_PCIE_REG_RPIFR1);
> +
> +		/* Check whether interrupt valid */
> +		if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) {
> +			dev_warn(port->dev, "RP Intr FIFO1 read error\n");
> +			return IRQ_HANDLED;
> +		}
> +
> +		/* Clear interrupt FIFO register 1 */
> +		pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK,
> +			   XILINX_PCIE_REG_RPIFR1);
> +
> +		/* Handle INTx Interrupt */
> +		val = ((val & XILINX_PCIE_RPIFR1_INTR_MASK) >>
> +			XILINX_PCIE_RPIFR1_INTR_SHIFT) + 1;
> +		generic_handle_irq(irq_find_mapping(port->irq_domain, val));
> +	}
> +
> +	if (status & XILINX_PCIE_INTR_MSI) {
> +		/* MSI Interrupt */
> +		val = pcie_read(port, XILINX_PCIE_REG_RPIFR1);
> +
> +		if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) {
> +			dev_warn(port->dev, "RP Intr FIFO1 read error\n");
> +			return IRQ_HANDLED;
> +		}
> +
> +		if (val & XILINX_PCIE_RPIFR1_MSI_INTR) {
> +			msi_data = pcie_read(port, XILINX_PCIE_REG_RPIFR2) &
> +				   XILINX_PCIE_RPIFR2_MSG_DATA;
> +
> +			/* Clear interrupt FIFO register 1 */
> +			pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK,
> +				   XILINX_PCIE_REG_RPIFR1);
> +
> +			if (IS_ENABLED(CONFIG_PCI_MSI)) {
> +				/* Handle MSI Interrupt */
> +				generic_handle_irq(msi_data);
> +			}
> +		}
> +	}
> +
> +	if (status & XILINX_PCIE_INTR_SLV_UNSUPP)
> +		dev_warn(port->dev, "Slave unsupported request\n");
> +
> +	if (status & XILINX_PCIE_INTR_SLV_UNEXP)
> +		dev_warn(port->dev, "Slave unexpected completion\n");
> +
> +	if (status & XILINX_PCIE_INTR_SLV_COMPL)
> +		dev_warn(port->dev, "Slave completion timeout\n");
> +
> +	if (status & XILINX_PCIE_INTR_SLV_ERRP)
> +		dev_warn(port->dev, "Slave Error Poison\n");
> +
> +	if (status & XILINX_PCIE_INTR_SLV_CMPABT)
> +		dev_warn(port->dev, "Slave Completer Abort\n");
> +
> +	if (status & XILINX_PCIE_INTR_SLV_ILLBUR)
> +		dev_warn(port->dev, "Slave Illegal Burst\n");
> +
> +	if (status & XILINX_PCIE_INTR_MST_DECERR)
> +		dev_warn(port->dev, "Master decode error\n");
> +
> +	if (status & XILINX_PCIE_INTR_MST_SLVERR)
> +		dev_warn(port->dev, "Master slave error\n");
> +
> +	if (status & XILINX_PCIE_INTR_MST_ERRP)
> +		dev_warn(port->dev, "Master error poison\n");
> +
> +	/* Clear the Interrupt Decode register */
> +	pcie_write(port, status, XILINX_PCIE_REG_IDR);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +/**
> + * xilinx_pcie_free_irq_domain - Free IRQ domain
> + * @port: PCIe port information
> + */
> +static void xilinx_pcie_free_irq_domain(struct xilinx_pcie_port *port)
> +{
> +	int i;
> +	u32 irq, num_irqs;
> +
> +	/* Free IRQ Domain */
> +	if (IS_ENABLED(CONFIG_PCI_MSI)) {
> +		free_pages(port->msg_addr, 0);
> +
> +		num_irqs = XILINX_NUM_MSI_IRQS;
> +	} else {
> +		/* INTx */
> +		num_irqs = 4;
> +	}
> +
> +	for (i = 0; i < num_irqs; i++) {
> +		irq = irq_find_mapping(port->irq_domain, i);
> +		if (irq > 0)
> +			irq_dispose_mapping(irq);
> +	}
> +
> +	irq_domain_remove(port->irq_domain);
> +}
> +
> +/**
> + * xilinx_pcie_init_irq_domain - Initialize IRQ domain
> + * @port: PCIe port information
> + *
> + * Return: '0' on success and error value on failure
> + */
> +static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port)
> +{
> +	struct device *dev = port->dev;
> +	struct device_node *node = dev->of_node;
> +
> +	if (IS_ENABLED(CONFIG_PCI_MSI)) {
> +		/* Setup MSI */
> +		int i;
> +
> +		port->irq_domain = irq_domain_add_linear(node,
> +							 XILINX_NUM_MSI_IRQS,
> +							 &msi_domain_ops,
> +							 &xilinx_pcie_msi_chip);
> +		if (!port->irq_domain) {
> +			dev_err(dev, "Failed to get a MSI IRQ domain\n");
> +			return PTR_ERR(port->irq_domain);
> +		}
> +
> +		for (i = 0; i < XILINX_NUM_MSI_IRQS; i++)
> +			irq_create_mapping(port->irq_domain, i);
> +
> +		xilinx_pcie_enable_msi(port);
> +	} else {

This means that you can't set up INTx if CONFIG_PCI_MSI is defined.  Is
that what you want?  The hardware doesn't know whether we have
CONFIG_PCI_MSI defined, of course, so I would think it would still support
INTx either way.

> +		/* Setup INTx */
> +		struct device_node *pcie_intc_node =
> +				 of_get_next_child(node, NULL);
> +
> +		if (!pcie_intc_node) {
> +			dev_err(dev, "No PCIe Intc node found\n");
> +			return PTR_ERR(pcie_intc_node);
> +		}
> +
> +		port->irq_domain = irq_domain_add_linear(pcie_intc_node, 4,
> +							 &intx_domain_ops,
> +							 port);
> +		if (!port->irq_domain) {
> +			dev_err(dev, "Failed to get a INTx IRQ domain\n");
> +			return PTR_ERR(port->irq_domain);
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +/**
> + * xilinx_pcie_init_port - Initialize hardware
> + * @port: PCIe port information
> + */
> +static void xilinx_pcie_init_port(struct xilinx_pcie_port *port)
> +{
> +	/* Check if PCIe link is up? */

Superfluous comment, since it's obvious from the function name and dev_info
text.

> +	port->link_up = xilinx_pcie_is_link_up(port);
> +	if (!port->link_up)
> +		dev_info(port->dev, "PCIe Link is DOWN\n");
> +	else
> +		dev_info(port->dev, "PCIe Link is UP\n");
> +
> +	/* Disable all interrupts*/
> +	pcie_write(port, ~XILINX_PCIE_IDR_ALL_MASK,
> +		   XILINX_PCIE_REG_IMR);
> +
> +	/* Clear pending interrupts */
> +	pcie_write(port, pcie_read(port, XILINX_PCIE_REG_IDR) &
> +			 XILINX_PCIE_IMR_ALL_MASK,
> +		   XILINX_PCIE_REG_IDR);
> +
> +	/* Enable all interrupts*/
> +	pcie_write(port, XILINX_PCIE_IMR_ALL_MASK, XILINX_PCIE_REG_IMR);
> +
> +	/* Enable the Bridge enable bit */
> +	pcie_write(port, pcie_read(port, XILINX_PCIE_REG_RPSC) |
> +			 XILINX_PCIE_REG_RPSC_BEN,
> +		   XILINX_PCIE_REG_RPSC);
> +}
> +
> +/**
> + * xilinx_pcie_setup - Setup memory resources
> + * @nr: Bus number
> + * @sys: Per controller structure
> + *
> + * Return: '1' on success and error value on failure
> + */
> +static int xilinx_pcie_setup(int nr, struct pci_sys_data *sys)
> +{
> +	struct xilinx_pcie_port *port = sys_to_pcie(sys);
> +	struct device *dev = port->dev;
> +	struct device_node *node = dev->of_node;
> +	struct resource *mem;
> +	resource_size_t offset;
> +	struct of_pci_range_parser parser;
> +	struct of_pci_range range;
> +	struct pci_host_bridge_window *win;
> +	int err = 0, mem_resno = 0;
> +
> +	/* Get the ranges */
> +	if (of_pci_range_parser_init(&parser, node)) {
> +		dev_err(dev, "missing \"ranges\" property\n");
> +		return -EINVAL;
> +	}
> +
> +	/* Parse the ranges and add the resources found to the list */
> +	for_each_of_pci_range(&parser, &range) {
> +
> +		if (mem_resno >= XILINX_MAX_NUM_RESOURCES) {
> +			dev_err(dev, "Maximum memory resources exceeded\n");
> +			return -EINVAL;
> +		}
> +
> +		mem = devm_kmalloc(dev, sizeof(*mem), GFP_KERNEL);
> +		if (!mem) {
> +			err = -ENOMEM;
> +			goto free_resources;
> +		}
> +
> +		of_pci_range_to_resource(&range, node, mem);
> +
> +		switch (mem->flags & IORESOURCE_TYPE_BITS) {
> +		case IORESOURCE_MEM:
> +			offset = range.cpu_addr - range.pci_addr;
> +			mem_resno++;
> +			break;
> +		default:
> +			err = -EINVAL;
> +			break;
> +		}
> +
> +		if (err < 0) {
> +			dev_warn(dev, "Invalid resource found\n");

It'd be nice for debugging to print something useful here, e.g,
%pR of "mem".

> +			continue;
> +		}
> +
> +		err = request_resource(&iomem_resource, mem);
> +		if (err)
> +			goto free_resources;
> +
> +		pci_add_resource_offset(&sys->resources, mem, offset);
> +	}
> +
> +	return 1;
> +
> +free_resources:
> +	release_child_resources(&iomem_resource);
> +	list_for_each_entry(win, &sys->resources, list)
> +		devm_kfree(dev, win->res);
> +	pci_free_resource_list(&sys->resources);
> +
> +	return err;
> +}
> +
> +/**
> + * xilinx_pcie_scan_bus - Scan PCIe bus for devices
> + * @nr: Bus number
> + * @sys: Per controller structure
> + *
> + * Return: Valid Bus pointer on success and NULL on failure
> + */
> +static struct pci_bus __init *xilinx_pcie_scan_bus(int nr,
> +						   struct pci_sys_data *sys)
> +{
> +	struct xilinx_pcie_port *port = sys_to_pcie(sys);
> +	struct pci_bus *bus;
> +
> +	if (port) {
> +		port->root_busno = sys->busnr;
> +		bus = pci_scan_root_bus(port->dev, sys->busnr, &xilinx_pcie_ops,
> +					sys, &sys->resources);

I don't think you're supplying a bus number resource here, and you should.
There's a discussion about this issue in a different driver here:

http://lkml.kernel.org/r/[e-mail]

> +	} else {
> +		bus = NULL;
> +		BUG();
> +	}
> +
> +	return bus;
> +}
> +
> +/**
> + * xilinx_pcie_parse_dt - Parse Device tree
> + * @port: PCIe port information
> + *
> + * Return: '0' on success and error value on failure
> + */
> +static int xilinx_pcie_parse_dt(struct xilinx_pcie_port *port)
> +{
> +	struct device *dev = port->dev;
> +	struct device_node *node = dev->of_node;
> +	struct resource regs, busn;
> +	const char *type;
> +	int err;
> +
> +	/* Check for device type */
> +	type = of_get_property(node, "device_type", NULL);
> +	if (!type || strcmp(type, "pci")) {
> +		dev_err(dev, "invalid \"device_type\" %s\n", type);
> +		return -EINVAL;
> +	}
> +
> +	/* Map the register space */
> +	err = of_address_to_resource(node, 0, &regs);
> +	if (err) {
> +		dev_err(dev, "missing \"reg\" property\n");
> +		return err;
> +	}
> +
> +	port->reg_base = devm_ioremap_resource(dev, &regs);
> +	if (IS_ERR(port->reg_base))
> +		return PTR_ERR(port->reg_base);
> +
> +	/* Map IRQ */
> +	port->irq = irq_of_parse_and_map(node, 0);
> +	err = devm_request_irq(dev, port->irq, xilinx_pcie_intr_handler,
> +			       IRQF_SHARED, "xilinx-pcie", port);
> +	if (err) {
> +		dev_err(dev, "unable to request irq %d\n", port->irq);
> +		return err;
> +	}
> +
> +	/* Get the bus range */
> +	if (of_pci_parse_bus_range(node, &busn)) {
> +		u32 val = pcie_read(port, XILINX_PCIE_REG_BIR);
> +		u8 last;
> +
> +		last = (val & XILINX_PCIE_BIR_ECAM_SZ_MASK) >>
> +			XILINX_PCIE_BIR_ECAM_SZ_SHIFT;
> +
> +		busn = (struct resource) {
> +			.name	= node->name,
> +			.start	= 0,
> +			.end	= last,
> +			.flags	= IORESOURCE_BUS,
> +		};

This doesn't actually *do* anything, does it?  You're filling in "busn",
but that's just a local variable, and I don't see that you save the
information anywhere.

> +	}
> +
> +	return 0;
> +}
> +
> +/**
> + * xilinx_pcie_probe - Probe function
> + * @pdev: Platform device pointer
> + *
> + * Return: '0' on success and error value on failure
> + */
> +static int xilinx_pcie_probe(struct platform_device *pdev)
> +{
> +	struct xilinx_pcie_port *port;
> +	struct hw_pci hw;
> +	struct device *dev = &pdev->dev;
> +	int err;
> +
> +	if (!dev->of_node)
> +		return -ENODEV;
> +
> +	port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
> +	if (!port)
> +		return -ENOMEM;
> +
> +	port->dev = dev;
> +
> +	/* Parse the device tree */

All the comments here are superfluous.

> +	err = xilinx_pcie_parse_dt(port);
> +	if (err) {
> +		dev_err(dev, "Parsing DT failed\n");
> +		return err;
> +	}
> +
> +	/* Initialize the hardware */
> +	xilinx_pcie_init_port(port);
> +
> +	/* Setup IRQ Domain */
> +	err = xilinx_pcie_init_irq_domain(port);
> +	if (err) {
> +		dev_err(dev, "Failed creating IRQ Dommain\n");
> +		return err;
> +	}
> +
> +	/* Initialize hw_pci structure */
> +	memset(&hw, 0, sizeof(hw));
> +	hw = (struct hw_pci) {
> +		.nr_controllers	= 1,
> +		.private_data	= (void **)&port,
> +		.setup		= xilinx_pcie_setup,
> +		.map_irq	= of_irq_parse_and_map_pci,
> +		.add_bus	= xilinx_pcie_add_bus,
> +		.scan		= xilinx_pcie_scan_bus,
> +		.ops		= &xilinx_pcie_ops,
> +	};
> +
> +	/* Register the device */
> +	pci_common_init_dev(dev, &hw);
> +
> +	platform_set_drvdata(pdev, port);
> +
> +	return 0;
> +}
> +
> +/**
> + * xilinx_pcie_remove - Remove function
> + * @pdev: Platform device pointer
> + *
> + * Return: '0' always
> + */
> +static int xilinx_pcie_remove(struct platform_device *pdev)
> +{
> +	struct xilinx_pcie_port *port = platform_get_drvdata(pdev);
> +
> +	xilinx_pcie_free_irq_domain(port);
> +
> +	return 0;
> +}
> +
> +static struct of_device_id xilinx_pcie_of_match[] = {
> +	{ .compatible = "xlnx,axi-pcie-host-1.00.a" ,},

The "," inside the closing brace look unnecessary, but if you want to keep
it, the space should go after the comma instead of before it.

> +	{}
> +};
> +
> +static struct platform_driver xilinx_pcie_driver = {
> +	.driver = {
> +		.name = "xilinx-pcie",
> +		.owner = THIS_MODULE,
> +		.of_match_table = xilinx_pcie_of_match,
> +		.suppress_bind_attrs = true,
> +	},
> +	.probe = xilinx_pcie_probe,
> +	.remove = xilinx_pcie_remove,
> +};
> +module_platform_driver(xilinx_pcie_driver);
> +
> +MODULE_AUTHOR("Xilinx Inc");
> +MODULE_DESCRIPTION("Xilinx AXI PCIe driver");
> +MODULE_LICENSE("GPLv2");
> -- 
> 1.7.9.5
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to [e-mail]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Srikanth Thokala May 6, 2014, 7:09 a.m. UTC | #5

On Thu, May 1, 2014 at 3:11 AM, Bjorn Helgaas <[e-mail]> wrote:
> On Tue, Apr 15, 2014 at 05:08:31PM +0530, Srikanth Thokala wrote:
>> This is the driver for Xilinx AXI PCIe Host Bridge Soft IP
>>
>> Signed-off-by: Srikanth Thokala <[e-mail]>
>> ---
>> Changes in v3:
>> - Rebased on v3.15.0-rc1
>> - Added support for interrupt-map DT functionality.
>> - Removed map_irq() wrapper, instead using of_irq_parse_and_map_pci().
>> - Modified resource mapping logic as per the series
>>   "PCI: ARM: add support for generic PCI host controller"
>> - Modified devicetree binding documentation to update with interrupt-
>>   map properties.
>> - Use devm calls wherever applicable.
>> - Fixed minor comments from Jason
>> - Thanks Jason for the review and suggestions.
>>
>> Changes in v2:
>> - Rebased on v3.14.0-rc8
>> - Removed IP specific DT properties like include-rc, axibar-num etc.,
>>   as suggested by Jason and Bjorn, Thanks
>> ---
>>  .../devicetree/bindings/pci/xilinx-pcie.txt        |   62 ++
>>  drivers/pci/host/Kconfig                           |    7 +
>>  drivers/pci/host/Makefile                          |    1 +
>>  drivers/pci/host/pci-xilinx.c                      |  999 ++++++++++++++++++++
>>  4 files changed, 1069 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/pci/xilinx-pcie.txt
>>  create mode 100644 drivers/pci/host/pci-xilinx.c
>>
>> diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
>> new file mode 100644
>> index 0000000..2fb28e0
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
>> @@ -0,0 +1,62 @@
>> +* Xilinx AXI PCIe Root Port Bridge DT description
>> +
>> +Required properties:
>> +- #address-cells: Address representation for root ports, set to <3>
>> +- #size-cells: Size representation for root ports, set to <2>
>> +- #interrupt-cells: specifies the number of cells needed to encode an
>> +     interrupt source. The value must be 1.
>> +- compatible: Should contain "xlnx,axi-pcie-host-1.00.a"
>> +- reg: Should contain AXI PCIe registers location and length
>> +- device_type: must be "pci"
>> +- interrupts: Should contain AXI PCIe interrupt
>> +- interrupt-map-mask,
>> +  interrupt-map: standard PCI properties to define the mapping of the
>> +     PCI interface to interrupt numbers.
>> +- ranges: ranges for the PCI memory regions (I/O space region is noti
>> +     supported by hardware)
>> +     Please refer to the standard PCI bus binding document for a more
>> +     detailed explanation
>> +
>> +Optional properties:
>> +- bus-range: PCI bus numbers covered
>> +
>> +Interrupt controller child node
>> ++++++++++++++++++++++++++++++++
>> +Required properties:
>> +- interrupt-controller: identifies the node as an interrupt controller
>> +- #address-cells: specifies the number of cells needed to encode an
>> +     address. The value must be 0.
>> +- #interrupt-cells: specifies the number of cells needed to encode an
>> +     interrupt source. The value must be 1.
>> +
>> +NOTE:
>> +The core provides a single interrupt for both INTx/MSI messages. So,
>> +created a interrupt controller node to support 'interrupt-map' DT
>> +functionality.  The driver will create an IRQ domain for this map, decode
>> +the four INTx interrupts in ISR and route them to this domain.
>> +
>> +
>> +Example:
>> +++++++++
>> +
>> +     pci_express: axi-pcie@50000000 {
>> +             #address-cells = <3>;
>> +             #size-cells = <2>;
>> +             #interrupt-cells = <1>;
>> +             compatible = "xlnx,axi-pcie-host-1.00.a";
>> +             reg = < 0x50000000 0x10000000 >;
>> +             device_type = "pci";
>> +             interrupts = < 0 52 4 >;
>> +             interrupt-map-mask = <0 0 0 7>;
>> +             interrupt-map = <0 0 0 1 &pcie_intc 1>,
>> +                             <0 0 0 2 &pcie_intc 2>,
>> +                             <0 0 0 3 &pcie_intc 3>,
>> +                             <0 0 0 4 &pcie_intc 4>;
>> +             ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >;
>> +
>> +             pcie_intc: interrupt-controller {
>> +                     interrupt-controller;
>> +                     #address-cells = <0>;
>> +                     #interrupt-cells = <1>;
>> +             }
>> +     };
>> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
>> index a6f67ec..71afdcd 100644
>> --- a/drivers/pci/host/Kconfig
>> +++ b/drivers/pci/host/Kconfig
>> @@ -33,4 +33,11 @@ config PCI_RCAR_GEN2
>>         There are 3 internal PCI controllers available with a single
>>         built-in EHCI/OHCI host controller present on each one.
>>
>> +config PCI_XILINX
>> +     bool "Xilinx AXI PCIe host bridge support"
>> +     depends on ARCH_ZYNQ
>> +     help
>> +       Say 'Y' here if you want kernel to support the Xilinx AXI PCIe
>> +       Host Bridge driver.
>> +
>>  endmenu
>> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
>> index 13fb333..4e9c843 100644
>> --- a/drivers/pci/host/Makefile
>> +++ b/drivers/pci/host/Makefile
>> @@ -4,3 +4,4 @@ obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
>>  obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
>>  obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
>>  obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
>> +obj-$(CONFIG_PCI_XILINX) += pci-xilinx.o
>> diff --git a/drivers/pci/host/pci-xilinx.c b/drivers/pci/host/pci-xilinx.c
>> new file mode 100644
>> index 0000000..d9afe66
>> --- /dev/null
>> +++ b/drivers/pci/host/pci-xilinx.c
>> @@ -0,0 +1,999 @@
>> +/*
>> + * PCIe host controller driver for Xilinx AXI PCIe Bridge
>> + *
>> + * Copyright (c) 2012 - 2014 Xilinx, Inc.
>> + *
>> + * Based on the Tegra PCIe driver
>> + *
>> + * Bits taken from Synopsys Designware Host controller driver and
>> + * ARM PCI Host generic driver.
>> + *
>> + * This program is free software: you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation, either version 2 of the License, or
>> + * (at your option) any later version.
>> + */
>> +
>> +#include <linux/interrupt.h>
>> +#include <linux/irq.h>
>> +#include <linux/irqdomain.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/msi.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_pci.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/pci.h>
>> +#include <linux/platform_device.h>
>> +
>> +/* Register definitions */
>> +#define XILINX_PCIE_REG_VSECC                0x00000128
>> +#define XILINX_PCIE_REG_VSECH                0x0000012c
>> +#define XILINX_PCIE_REG_BIR          0x00000130
>> +#define XILINX_PCIE_REG_BSCR         0x00000134
>> +#define XILINX_PCIE_REG_IDR          0x00000138
>> +#define XILINX_PCIE_REG_IMR          0x0000013c
>> +#define XILINX_PCIE_REG_BLR          0x00000140
>> +#define XILINX_PCIE_REG_PSCR         0x00000144
>> +#define XILINX_PCIE_REG_RPSC         0x00000148
>> +#define XILINX_PCIE_REG_MSIBASE1     0x0000014c
>> +#define XILINX_PCIE_REG_MSIBASE2     0x00000150
>> +#define XILINX_PCIE_REG_RPEFR                0x00000154
>> +#define XILINX_PCIE_REG_RPIFR1               0x00000158
>> +#define XILINX_PCIE_REG_RPIFR2               0x0000015c
>> +#define XILINX_PCIE_REG_VSECC2               0x00000200
>> +#define XILINX_PCIE_REG_VSECH2               0x00000204
>> +
>> +/* Interrupt registers definitions */
>> +#define XILINX_PCIE_INTR_LINK_DOWN   BIT(0)
>> +#define XILINX_PCIE_INTR_ECRC_ERR    BIT(1)
>> +#define XILINX_PCIE_INTR_STR_ERR     BIT(2)
>> +#define XILINX_PCIE_INTR_HOT_RESET   BIT(3)
>> +#define XILINX_PCIE_INTR_CFG_COMPL   GENMASK(7, 5)
>> +#define XILINX_PCIE_INTR_CFG_TIMEOUT BIT(8)
>> +#define XILINX_PCIE_INTR_CORRECTABLE BIT(9)
>> +#define XILINX_PCIE_INTR_NONFATAL    BIT(10)
>> +#define XILINX_PCIE_INTR_FATAL               BIT(11)
>> +#define XILINX_PCIE_INTR_INTX                BIT(16)
>> +#define XILINX_PCIE_INTR_MSI         BIT(17)
>> +#define XILINX_PCIE_INTR_SLV_UNSUPP  BIT(20)
>> +#define XILINX_PCIE_INTR_SLV_UNEXP   BIT(21)
>> +#define XILINX_PCIE_INTR_SLV_COMPL   BIT(22)
>> +#define XILINX_PCIE_INTR_SLV_ERRP    BIT(23)
>> +#define XILINX_PCIE_INTR_SLV_CMPABT  BIT(24)
>> +#define XILINX_PCIE_INTR_SLV_ILLBUR  BIT(25)
>> +#define XILINX_PCIE_INTR_MST_DECERR  BIT(26)
>> +#define XILINX_PCIE_INTR_MST_SLVERR  BIT(27)
>> +#define XILINX_PCIE_INTR_MST_ERRP    BIT(28)
>> +#define XILINX_PCIE_IMR_ALL_MASK     0x1FF30FED
>> +#define XILINX_PCIE_IDR_ALL_MASK     0xFFFFFFFF
>> +
>> +/* Root Port Error FIFO Read Register definitions */
>> +#define XILINX_PCIE_RPEFR_ERR_VALID  BIT(18)
>> +#define XILINX_PCIE_RPEFR_REQ_ID     GENMASK(15, 0)
>> +#define XILINX_PCIE_RPEFR_ALL_MASK   0xFFFFFFFF
>> +
>> +/* Root Port Interrupt FIFO Read Register 1 definitions */
>> +#define XILINX_PCIE_RPIFR1_INTR_VALID        BIT(31)
>> +#define XILINX_PCIE_RPIFR1_MSI_INTR  BIT(30)
>> +#define XILINX_PCIE_RPIFR1_INTR_ASSRT        BIT(29)
>> +#define XILINX_PCIE_RPIFR1_INTR_MASK GENMASK(28, 27)
>> +#define XILINX_PCIE_RPIFR1_MSI_ADR_MASK      GENMASK(26, 16)
>> +#define XILINX_PCIE_RPIFR1_ALL_MASK  0xFFFFFFFF
>> +#define XILINX_PCIE_RPIFR1_INTR_SHIFT                27
>> +#define XILINX_PCIE_RPIFR1_MSI_ADR_SHIFT     16
>> +
>> +/* Bridge Info Register definitions */
>> +#define XILINX_PCIE_BIR_ECAM_SZ_MASK GENMASK(18, 16)
>> +#define XILINX_PCIE_BIR_ECAM_SZ_SHIFT        16
>> +
>> +/* Root Port Interrupt FIFO Read Register 2 definitions */
>> +#define XILINX_PCIE_RPIFR2_MSG_DATA  GENMASK(15, 0)
>> +
>> +/* Root Port Status/control Register definitions */
>> +#define XILINX_PCIE_REG_RPSC_BEN     BIT(0)
>> +
>> +/* Phy Status/Control Register definitions */
>> +#define XILINX_PCIE_REG_PSCR_LNKUP   BIT(11)
>> +
>> +/* ECAM definitions */
>> +#define ECAM_BUS_NUM_SHIFT           20
>> +#define ECAM_DEV_NUM_SHIFT           12
>> +
>> +/* PCI Configuration space Bus Number Register definitions */
>> +#define PCI_SECONDARY_BUS_NUM_SHIFT  8
>> +#define PCI_SUBORDINATE_BUS_NUM_SHIFT        16
>> +#define PCI_LATENCY_TIMER_MASK               GENMASK(31, 24)
>> +
>> +/* Number of MSI IRQs */
>> +#define XILINX_NUM_MSI_IRQS          128
>> +
>> +/* Number of Memory Resources */
>> +#define XILINX_MAX_NUM_RESOURCES     3
>> +
>> +/**
>> + * struct xilinx_pcie_port - PCIe port information
>> + * @reg_base: IO Mapped Register Base
>> + * @irq: Interrupt number
>> + * @msg_addr: MSI message address
>> + * @root_busno: Root Bus number
>> + * @link_up: Link status flag
>> + * @dev: Device pointer
>> + * @irq_domain: IRQ domain pointer
>> + */
>> +struct xilinx_pcie_port {
>> +     void __iomem *reg_base;
>> +     u32 irq;
>> +     unsigned long msg_addr;
>> +     u8 root_busno;
>> +     bool link_up;
>> +     struct device *dev;
>> +     struct irq_domain *irq_domain;
>> +};
>> +
>> +static DECLARE_BITMAP(msi_irq_in_use, XILINX_NUM_MSI_IRQS);
>> +
>> +static inline struct xilinx_pcie_port *sys_to_pcie(struct pci_sys_data *sys)
>> +{
>> +     return sys->private_data;
>> +}
>> +
>> +static inline u32 pcie_read(struct xilinx_pcie_port *port, u32 reg)
>> +{
>> +     return readl(port->reg_base + reg);
>> +}
>> +
>> +static inline void pcie_write(struct xilinx_pcie_port *port,
>> +                           u32 val, u32 reg)
>> +{
>> +     writel(val, port->reg_base + reg);
>> +}
>> +
>> +static inline bool xilinx_pcie_is_link_up(struct xilinx_pcie_port *port)
>> +{
>> +     return (pcie_read(port, XILINX_PCIE_REG_PSCR) &
>> +             XILINX_PCIE_REG_PSCR_LNKUP) ? 1 : 0;
>> +}
>> +
>> +/**
>> + * xilinx_pcie_clear_err_interrupts - Clear Error Interrupts
>> + * @port: PCIe port information
>> + */
>> +static inline void
>> +xilinx_pcie_clear_err_interrupts(struct xilinx_pcie_port *port)
>> +{
>> +     u32 val = pcie_read(port, XILINX_PCIE_REG_RPEFR);
>> +
>> +     if (val & XILINX_PCIE_RPEFR_ERR_VALID) {
>> +             dev_dbg(port->dev, "Requester ID %d\n",
>> +                     val & XILINX_PCIE_RPEFR_REQ_ID);
>> +             pcie_write(port, XILINX_PCIE_RPEFR_ALL_MASK,
>> +                        XILINX_PCIE_REG_RPEFR);
>> +     }
>> +}
>> +
>> +/**
>> + * xilinx_pcie_verify_config - Verify configuration
>> + * @bus: Bus structure of current bus
>> + * @devfn: device/function
>> + *
>> + * Return: 0 on success and PCIBIOS_DEVICE_NOT_FOUND on error
>
> This comment about the return value doesn't match the code.

I will fix it, Thanks.

>
>> + */
>> +static int xilinx_pcie_verify_config(struct pci_bus *bus,
>> +                                  unsigned int devfn)
>> +{
>> +     struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
>> +
>> +     /* Check if link is up when trying to access downstream ports */
>> +     if (bus->number != port->root_busno)
>> +             if (!xilinx_pcie_is_link_up(port))
>> +                     return 0;
>> +
>> +     /* Only one device down on each root port */
>> +     if (bus->number == port->root_busno && devfn > 0)
>> +             return 0;
>> +
>> +     /*
>> +      * Do not read more than one device on the bus directly attached
>> +      * to RC.
>> +      */
>> +     if (bus->primary == port->root_busno && devfn > 0)
>> +             return 0;
>> +
>> +     return 1;
>> +}
>> +
>> +/**
>> + * xilinx_pcie_get_config_base - Get configuration base
>> + * @bus: Bus structure of current bus
>
> There's not really a concept of a "current" bus here.  I think these
> function comments that repeat what the function and argument names already
> tell us are of minimal value.  But I know some people do like them.

I will fix it.

>
>> + * @devfn: Device/function
>> + * @where: Offset from base
>> + *
>> + * Return: Base address of the configuration space needed to be
>> + *      accessed.
>> + */
>> +static void __iomem *xilinx_pcie_get_config_base(struct pci_bus *bus,
>> +                                              unsigned int devfn,
>> +                                              int where)
>> +{
>> +     struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
>> +     int relbus;
>> +
>> +     relbus = (bus->number << ECAM_BUS_NUM_SHIFT) |
>> +              (devfn << ECAM_DEV_NUM_SHIFT);
>> +
>> +     return port->reg_base + relbus + where;
>> +}
>> +
>> +/**
>> + * xilinx_pcie_read_config - Read configuration space
>> + * @bus: Bus structure of current bus
>> + * @devfn: Device/function
>> + * @where: Offset from base
>> + * @size: Byte/word/dword
>> + * @val: Value to be read
>> + *
>> + * Return: PCIBIOS_SUCCESSFUL on success
>> + *      EINVAL/PCIBIOS_DEVICE_NOT_FOUND/PCIBIOS_BAD_REGISTER_NUMBER
>> + *      on failure.
>> + */
>> +static int xilinx_pcie_read_config(struct pci_bus *bus,
>> +                                unsigned int devfn, int where,
>> +                                int size, u32 *val)
>> +{
>> +     struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
>> +     void __iomem *addr;
>> +
>> +     if (!port) {
>> +             BUG();
>> +             return -EINVAL;
>> +     }
>> +
>> +     if (!xilinx_pcie_verify_config(bus, devfn)) {
>> +             *val = 0xFFFFFFFF;
>> +             return PCIBIOS_DEVICE_NOT_FOUND;
>> +     }
>> +
>> +     addr = xilinx_pcie_get_config_base(bus, devfn, where);
>> +
>> +     switch (size) {
>> +     case 1:
>> +             *val = readb(addr);
>> +             break;
>> +     case 2:
>> +             *val = readw(addr);
>> +             break;
>> +     default:
>> +             *val = readl(addr);
>> +             break;
>> +     }
>> +
>> +     return PCIBIOS_SUCCESSFUL;
>> +}
>> +
>> +/**
>> + * xilinx_pcie_write_config - Write configuration space
>> + * @bus: Bus structure of current bus
>> + * @devfn: Device/function
>> + * @where: Offset from base
>> + * @size: Byte/word/dword
>> + * @val: Value to be written to device
>> + *
>> + * Return: PCIBIOS_SUCCESSFUL on success,
>> + *      EINVAL/PCIBIOS_DEVICE_NOT_FOUND/PCIBIOS_BAD_REGISTER_NUMBER
>> + *      on failure.
>> + */
>> +static int xilinx_pcie_write_config(struct pci_bus *bus,
>> +                                 unsigned int devfn, int where,
>> +                                 int size, u32 val)
>> +{
>> +     struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
>> +     void __iomem *addr;
>> +
>> +     if (!port) {
>> +             BUG();
>> +             return -EINVAL;
>> +     }
>> +
>> +     if (!xilinx_pcie_verify_config(bus, devfn))
>> +             return PCIBIOS_DEVICE_NOT_FOUND;
>> +
>> +     addr = xilinx_pcie_get_config_base(bus, devfn, where);
>> +
>> +     switch (size) {
>> +     case 1:
>> +             writeb(val, addr);
>> +             break;
>> +     case 2:
>> +             writew(val, addr);
>> +             break;
>> +     default:
>> +             writel(val, addr);
>> +             break;
>> +     }
>> +
>> +     return PCIBIOS_SUCCESSFUL;
>> +}
>> +
>> +/* PCIe operations */
>> +static struct pci_ops xilinx_pcie_ops = {
>> +     .read  = xilinx_pcie_read_config,
>> +     .write = xilinx_pcie_write_config,
>> +};
>> +
>> +/* MSI functions */
>> +
>> +/**
>> + * xilinx_pcie_destroy_msi - Free MSI number
>> + * @irq: IRQ to be freed
>> + */
>> +static void xilinx_pcie_destroy_msi(unsigned int irq)
>> +{
>> +     struct irq_desc *desc;
>> +     struct msi_desc *msi;
>> +     struct xilinx_pcie_port *port;
>> +
>> +     desc = irq_to_desc(irq);
>> +     msi = irq_desc_get_msi_desc(desc);
>> +     port = sys_to_pcie(msi->dev->bus->sysdata);
>> +     if (!port) {
>> +             BUG();
>> +             return;
>> +     }
>> +
>> +     if (!test_bit(irq, msi_irq_in_use))
>> +             dev_err(port->dev, "Trying to free unused MSI#%d\n", irq);
>> +     else
>> +             clear_bit(irq, msi_irq_in_use);
>> +}
>> +
>> +/**
>> + * xilinx_pcie_assign_msi - Allocate MSI number
>> + * @port: PCIe port structure
>> + *
>> + * Return: A valid IRQ on success and error value on failure.
>> + */
>> +static int xilinx_pcie_assign_msi(struct xilinx_pcie_port *port)
>> +{
>> +     int pos;
>> +
>> +     pos = find_first_zero_bit(msi_irq_in_use, XILINX_NUM_MSI_IRQS);
>> +     if (pos < XILINX_NUM_MSI_IRQS)
>> +             set_bit(pos, msi_irq_in_use);
>> +     else
>> +             return -ENOSPC;
>> +
>> +     return irq_find_mapping(port->irq_domain, pos);
>> +}
>> +
>> +/**
>> + * xilinx_msi_teardown_irq - Destroy the MSI
>> + * @chip: MSI Chip descriptor
>> + * @irq: MSI IRQ to destroy
>> + */
>> +static void xilinx_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
>> +{
>> +     xilinx_pcie_destroy_msi(irq);
>> +}
>> +
>> +/**
>> + * xilinx_pcie_msi_setup_irq - Setup MSI request
>> + * @chip: MSI chip pointer
>> + * @pdev: PCIe device pointer
>> + * @desc: MSI descriptor pointer
>> + *
>> + * Return: '0' on success and error value on failure
>> + */
>> +static int xilinx_pcie_msi_setup_irq(struct msi_chip *chip,
>> +                                  struct pci_dev *pdev,
>> +                                  struct msi_desc *desc)
>> +{
>> +     struct xilinx_pcie_port *port = sys_to_pcie(pdev->bus->sysdata);
>> +     int irq;
>> +     struct msi_msg msg;
>> +
>> +     if (!port) {
>> +             BUG();
>> +             return -EINVAL;
>> +     }
>> +
>> +     irq = xilinx_pcie_assign_msi(port);
>> +     if (irq < 0)
>> +             return irq;
>> +
>> +     irq_set_msi_desc(irq, desc);
>> +
>> +     msg.address_hi = 0;
>> +     msg.address_lo = virt_to_phys((void *)port->msg_addr);
>> +     msg.data = irq;
>> +
>> +     write_msi_msg(irq, &msg);
>> +
>> +     return 0;
>> +}
>> +
>> +/* MSI Chip Descriptor */
>> +static struct msi_chip xilinx_pcie_msi_chip = {
>> +     .setup_irq = xilinx_pcie_msi_setup_irq,
>> +     .teardown_irq = xilinx_msi_teardown_irq,
>> +};
>> +
>> +/* HW Interrupt Chip Descriptor */
>> +static struct irq_chip xilinx_msi_irq_chip = {
>> +     .name = "Xilinx PCIe MSI",
>> +     .irq_enable = unmask_msi_irq,
>> +     .irq_disable = mask_msi_irq,
>> +     .irq_mask = mask_msi_irq,
>> +     .irq_unmask = unmask_msi_irq,
>> +};
>> +
>> +/**
>> + * xilinx_pcie_msi_map - Set the handler for the MSI and mark IRQ as valid
>> + * @domain: IRQ domain
>> + * @irq: Virtual IRQ number
>> + * @hwirq: HW interrupt number
>> + *
>> + * Return: Always returns 0.
>> + */
>> +static int xilinx_pcie_msi_map(struct irq_domain *domain, unsigned int irq,
>> +                            irq_hw_number_t hwirq)
>> +{
>> +     irq_set_chip_and_handler(irq, &xilinx_msi_irq_chip, handle_simple_irq);
>> +     irq_set_chip_data(irq, domain->host_data);
>> +     set_irq_flags(irq, IRQF_VALID);
>> +
>> +     return 0;
>> +}
>> +
>> +/* IRQ Domain operations */
>> +static const struct irq_domain_ops msi_domain_ops = {
>> +     .map = xilinx_pcie_msi_map,
>> +};
>> +
>> +/**
>> + * xilinx_pcie_enable_msi - Enable MSI support
>> + * @port: PCIe port information
>> + */
>> +static void xilinx_pcie_enable_msi(struct xilinx_pcie_port *port)
>> +{
>> +     port->msg_addr = __get_free_pages(GFP_KERNEL, 0);
>> +
>> +     pcie_write(port, 0x0, XILINX_PCIE_REG_MSIBASE1);
>> +     pcie_write(port, virt_to_phys((void *)port->msg_addr),
>> +                XILINX_PCIE_REG_MSIBASE2);
>> +}
>> +
>> +/**
>> + * xilinx_pcie_add_bus - Add MSI chip info to PCIe bus
>> + * @bus: PCIe bus
>> + */
>> +static void xilinx_pcie_add_bus(struct pci_bus *bus)
>> +{
>> +     if (IS_ENABLED(CONFIG_PCI_MSI)) {
>> +             struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
>> +
>> +             if (!port)
>> +                     return;
>> +
>> +             xilinx_pcie_msi_chip.dev = port->dev;
>> +             bus->msi = &xilinx_pcie_msi_chip;
>> +     }
>> +}
>> +
>> +/* INTx Functions */
>> +
>> +/**
>> + * xilinx_pcie_intx_map - Set the handler for the INTx and mark IRQ as valid
>> + * @domain: IRQ domain
>> + * @irq: Virtual IRQ number
>> + * @hwirq: HW interrupt number
>> + *
>> + * Return: Always returns 0.
>> + */
>> +static int xilinx_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
>> +                             irq_hw_number_t hwirq)
>> +{
>> +     irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);
>> +     irq_set_chip_data(irq, domain->host_data);
>> +     set_irq_flags(irq, IRQF_VALID);
>> +
>> +     return 0;
>> +}
>> +
>> +/* INTx IRQ Domain operations */
>> +static const struct irq_domain_ops intx_domain_ops = {
>> +     .map = xilinx_pcie_intx_map,
>> +};
>> +
>> +/* PCIe HW Functions */
>> +
>> +/**
>> + * xilinx_pcie_intr_handler - Interrupt Service Handler
>> + * @irq: IRQ number
>> + * @data: PCIe port information
>> + *
>> + * Return: IRQ_HANDLED on success and IRQ_NONE on failure
>> + */
>> +static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data)
>> +{
>> +     struct xilinx_pcie_port *port = (struct xilinx_pcie_port *)data;
>> +     u32 val, mask, status, msi_data;
>> +
>> +     /* Read interrupt decode and mask registers */
>> +     val = pcie_read(port, XILINX_PCIE_REG_IDR);
>> +     mask = pcie_read(port, XILINX_PCIE_REG_IMR);
>> +
>> +     status = val & mask;
>> +     if (!status)
>> +             return IRQ_NONE;
>> +
>> +     if (status & XILINX_PCIE_INTR_LINK_DOWN)
>> +             dev_warn(port->dev, "Link Down\n");
>> +
>> +     if (status & XILINX_PCIE_INTR_ECRC_ERR)
>> +             dev_warn(port->dev, "ECRC failed\n");
>> +
>> +     if (status & XILINX_PCIE_INTR_STR_ERR)
>> +             dev_warn(port->dev, "Streaming error\n");
>> +
>> +     if (status & XILINX_PCIE_INTR_HOT_RESET)
>> +             dev_info(port->dev, "Hot reset\n");
>> +
>> +     if (status & XILINX_PCIE_INTR_CFG_TIMEOUT)
>> +             dev_warn(port->dev, "ECAM access timeout\n");
>> +
>> +     if (status & XILINX_PCIE_INTR_CORRECTABLE) {
>> +             dev_warn(port->dev, "Correctable error message\n");
>> +             xilinx_pcie_clear_err_interrupts(port);
>> +     }
>> +
>> +     if (status & XILINX_PCIE_INTR_NONFATAL) {
>> +             dev_warn(port->dev, "Non fatal error message\n");
>> +             xilinx_pcie_clear_err_interrupts(port);
>> +     }
>> +
>> +     if (status & XILINX_PCIE_INTR_FATAL) {
>> +             dev_warn(port->dev, "Fatal error message\n");
>> +             xilinx_pcie_clear_err_interrupts(port);
>> +     }
>> +
>> +     if (status & XILINX_PCIE_INTR_INTX) {
>> +             /* INTx interrupt received */
>> +             val = pcie_read(port, XILINX_PCIE_REG_RPIFR1);
>> +
>> +             /* Check whether interrupt valid */
>> +             if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) {
>> +                     dev_warn(port->dev, "RP Intr FIFO1 read error\n");
>> +                     return IRQ_HANDLED;
>> +             }
>> +
>> +             /* Clear interrupt FIFO register 1 */
>> +             pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK,
>> +                        XILINX_PCIE_REG_RPIFR1);
>> +
>> +             /* Handle INTx Interrupt */
>> +             val = ((val & XILINX_PCIE_RPIFR1_INTR_MASK) >>
>> +                     XILINX_PCIE_RPIFR1_INTR_SHIFT) + 1;
>> +             generic_handle_irq(irq_find_mapping(port->irq_domain, val));
>> +     }
>> +
>> +     if (status & XILINX_PCIE_INTR_MSI) {
>> +             /* MSI Interrupt */
>> +             val = pcie_read(port, XILINX_PCIE_REG_RPIFR1);
>> +
>> +             if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) {
>> +                     dev_warn(port->dev, "RP Intr FIFO1 read error\n");
>> +                     return IRQ_HANDLED;
>> +             }
>> +
>> +             if (val & XILINX_PCIE_RPIFR1_MSI_INTR) {
>> +                     msi_data = pcie_read(port, XILINX_PCIE_REG_RPIFR2) &
>> +                                XILINX_PCIE_RPIFR2_MSG_DATA;
>> +
>> +                     /* Clear interrupt FIFO register 1 */
>> +                     pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK,
>> +                                XILINX_PCIE_REG_RPIFR1);
>> +
>> +                     if (IS_ENABLED(CONFIG_PCI_MSI)) {
>> +                             /* Handle MSI Interrupt */
>> +                             generic_handle_irq(msi_data);
>> +                     }
>> +             }
>> +     }
>> +
>> +     if (status & XILINX_PCIE_INTR_SLV_UNSUPP)
>> +             dev_warn(port->dev, "Slave unsupported request\n");
>> +
>> +     if (status & XILINX_PCIE_INTR_SLV_UNEXP)
>> +             dev_warn(port->dev, "Slave unexpected completion\n");
>> +
>> +     if (status & XILINX_PCIE_INTR_SLV_COMPL)
>> +             dev_warn(port->dev, "Slave completion timeout\n");
>> +
>> +     if (status & XILINX_PCIE_INTR_SLV_ERRP)
>> +             dev_warn(port->dev, "Slave Error Poison\n");
>> +
>> +     if (status & XILINX_PCIE_INTR_SLV_CMPABT)
>> +             dev_warn(port->dev, "Slave Completer Abort\n");
>> +
>> +     if (status & XILINX_PCIE_INTR_SLV_ILLBUR)
>> +             dev_warn(port->dev, "Slave Illegal Burst\n");
>> +
>> +     if (status & XILINX_PCIE_INTR_MST_DECERR)
>> +             dev_warn(port->dev, "Master decode error\n");
>> +
>> +     if (status & XILINX_PCIE_INTR_MST_SLVERR)
>> +             dev_warn(port->dev, "Master slave error\n");
>> +
>> +     if (status & XILINX_PCIE_INTR_MST_ERRP)
>> +             dev_warn(port->dev, "Master error poison\n");
>> +
>> +     /* Clear the Interrupt Decode register */
>> +     pcie_write(port, status, XILINX_PCIE_REG_IDR);
>> +
>> +     return IRQ_HANDLED;
>> +}
>> +
>> +/**
>> + * xilinx_pcie_free_irq_domain - Free IRQ domain
>> + * @port: PCIe port information
>> + */
>> +static void xilinx_pcie_free_irq_domain(struct xilinx_pcie_port *port)
>> +{
>> +     int i;
>> +     u32 irq, num_irqs;
>> +
>> +     /* Free IRQ Domain */
>> +     if (IS_ENABLED(CONFIG_PCI_MSI)) {
>> +             free_pages(port->msg_addr, 0);
>> +
>> +             num_irqs = XILINX_NUM_MSI_IRQS;
>> +     } else {
>> +             /* INTx */
>> +             num_irqs = 4;
>> +     }
>> +
>> +     for (i = 0; i < num_irqs; i++) {
>> +             irq = irq_find_mapping(port->irq_domain, i);
>> +             if (irq > 0)
>> +                     irq_dispose_mapping(irq);
>> +     }
>> +
>> +     irq_domain_remove(port->irq_domain);
>> +}
>> +
>> +/**
>> + * xilinx_pcie_init_irq_domain - Initialize IRQ domain
>> + * @port: PCIe port information
>> + *
>> + * Return: '0' on success and error value on failure
>> + */
>> +static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port)
>> +{
>> +     struct device *dev = port->dev;
>> +     struct device_node *node = dev->of_node;
>> +
>> +     if (IS_ENABLED(CONFIG_PCI_MSI)) {
>> +             /* Setup MSI */
>> +             int i;
>> +
>> +             port->irq_domain = irq_domain_add_linear(node,
>> +                                                      XILINX_NUM_MSI_IRQS,
>> +                                                      &msi_domain_ops,
>> +                                                      &xilinx_pcie_msi_chip);
>> +             if (!port->irq_domain) {
>> +                     dev_err(dev, "Failed to get a MSI IRQ domain\n");
>> +                     return PTR_ERR(port->irq_domain);
>> +             }
>> +
>> +             for (i = 0; i < XILINX_NUM_MSI_IRQS; i++)
>> +                     irq_create_mapping(port->irq_domain, i);
>> +
>> +             xilinx_pcie_enable_msi(port);
>> +     } else {
>
> This means that you can't set up INTx if CONFIG_PCI_MSI is defined.  Is
> that what you want?  The hardware doesn't know whether we have
> CONFIG_PCI_MSI defined, of course, so I would think it would still support
> INTx either way.

Thanks for pointing this. I will fix it in my v4.

>
>> +             /* Setup INTx */
>> +             struct device_node *pcie_intc_node =
>> +                              of_get_next_child(node, NULL);
>> +
>> +             if (!pcie_intc_node) {
>> +                     dev_err(dev, "No PCIe Intc node found\n");
>> +                     return PTR_ERR(pcie_intc_node);
>> +             }
>> +
>> +             port->irq_domain = irq_domain_add_linear(pcie_intc_node, 4,
>> +                                                      &intx_domain_ops,
>> +                                                      port);
>> +             if (!port->irq_domain) {
>> +                     dev_err(dev, "Failed to get a INTx IRQ domain\n");
>> +                     return PTR_ERR(port->irq_domain);
>> +             }
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +/**
>> + * xilinx_pcie_init_port - Initialize hardware
>> + * @port: PCIe port information
>> + */
>> +static void xilinx_pcie_init_port(struct xilinx_pcie_port *port)
>> +{
>> +     /* Check if PCIe link is up? */
>
> Superfluous comment, since it's obvious from the function name and dev_info
> text.

Ok.

>
>> +     port->link_up = xilinx_pcie_is_link_up(port);
>> +     if (!port->link_up)
>> +             dev_info(port->dev, "PCIe Link is DOWN\n");
>> +     else
>> +             dev_info(port->dev, "PCIe Link is UP\n");
>> +
>> +     /* Disable all interrupts*/
>> +     pcie_write(port, ~XILINX_PCIE_IDR_ALL_MASK,
>> +                XILINX_PCIE_REG_IMR);
>> +
>> +     /* Clear pending interrupts */
>> +     pcie_write(port, pcie_read(port, XILINX_PCIE_REG_IDR) &
>> +                      XILINX_PCIE_IMR_ALL_MASK,
>> +                XILINX_PCIE_REG_IDR);
>> +
>> +     /* Enable all interrupts*/
>> +     pcie_write(port, XILINX_PCIE_IMR_ALL_MASK, XILINX_PCIE_REG_IMR);
>> +
>> +     /* Enable the Bridge enable bit */
>> +     pcie_write(port, pcie_read(port, XILINX_PCIE_REG_RPSC) |
>> +                      XILINX_PCIE_REG_RPSC_BEN,
>> +                XILINX_PCIE_REG_RPSC);
>> +}
>> +
>> +/**
>> + * xilinx_pcie_setup - Setup memory resources
>> + * @nr: Bus number
>> + * @sys: Per controller structure
>> + *
>> + * Return: '1' on success and error value on failure
>> + */
>> +static int xilinx_pcie_setup(int nr, struct pci_sys_data *sys)
>> +{
>> +     struct xilinx_pcie_port *port = sys_to_pcie(sys);
>> +     struct device *dev = port->dev;
>> +     struct device_node *node = dev->of_node;
>> +     struct resource *mem;
>> +     resource_size_t offset;
>> +     struct of_pci_range_parser parser;
>> +     struct of_pci_range range;
>> +     struct pci_host_bridge_window *win;
>> +     int err = 0, mem_resno = 0;
>> +
>> +     /* Get the ranges */
>> +     if (of_pci_range_parser_init(&parser, node)) {
>> +             dev_err(dev, "missing \"ranges\" property\n");
>> +             return -EINVAL;
>> +     }
>> +
>> +     /* Parse the ranges and add the resources found to the list */
>> +     for_each_of_pci_range(&parser, &range) {
>> +
>> +             if (mem_resno >= XILINX_MAX_NUM_RESOURCES) {
>> +                     dev_err(dev, "Maximum memory resources exceeded\n");
>> +                     return -EINVAL;
>> +             }
>> +
>> +             mem = devm_kmalloc(dev, sizeof(*mem), GFP_KERNEL);
>> +             if (!mem) {
>> +                     err = -ENOMEM;
>> +                     goto free_resources;
>> +             }
>> +
>> +             of_pci_range_to_resource(&range, node, mem);
>> +
>> +             switch (mem->flags & IORESOURCE_TYPE_BITS) {
>> +             case IORESOURCE_MEM:
>> +                     offset = range.cpu_addr - range.pci_addr;
>> +                     mem_resno++;
>> +                     break;
>> +             default:
>> +                     err = -EINVAL;
>> +                     break;
>> +             }
>> +
>> +             if (err < 0) {
>> +                     dev_warn(dev, "Invalid resource found\n");
>
> It'd be nice for debugging to print something useful here, e.g,
> %pR of "mem".

Ok.

>
>> +                     continue;
>> +             }
>> +
>> +             err = request_resource(&iomem_resource, mem);
>> +             if (err)
>> +                     goto free_resources;
>> +
>> +             pci_add_resource_offset(&sys->resources, mem, offset);
>> +     }
>> +
>> +     return 1;
>> +
>> +free_resources:
>> +     release_child_resources(&iomem_resource);
>> +     list_for_each_entry(win, &sys->resources, list)
>> +             devm_kfree(dev, win->res);
>> +     pci_free_resource_list(&sys->resources);
>> +
>> +     return err;
>> +}
>> +
>> +/**
>> + * xilinx_pcie_scan_bus - Scan PCIe bus for devices
>> + * @nr: Bus number
>> + * @sys: Per controller structure
>> + *
>> + * Return: Valid Bus pointer on success and NULL on failure
>> + */
>> +static struct pci_bus __init *xilinx_pcie_scan_bus(int nr,
>> +                                                struct pci_sys_data *sys)
>> +{
>> +     struct xilinx_pcie_port *port = sys_to_pcie(sys);
>> +     struct pci_bus *bus;
>> +
>> +     if (port) {
>> +             port->root_busno = sys->busnr;
>> +             bus = pci_scan_root_bus(port->dev, sys->busnr, &xilinx_pcie_ops,
>> +                                     sys, &sys->resources);
>
> I don't think you're supplying a bus number resource here, and you should.
> There's a discussion about this issue in a different driver here:
>
> http://lkml.kernel.org/r/[e-mail]

Ok.

>
>> +     } else {
>> +             bus = NULL;
>> +             BUG();
>> +     }
>> +
>> +     return bus;
>> +}
>> +
>> +/**
>> + * xilinx_pcie_parse_dt - Parse Device tree
>> + * @port: PCIe port information
>> + *
>> + * Return: '0' on success and error value on failure
>> + */
>> +static int xilinx_pcie_parse_dt(struct xilinx_pcie_port *port)
>> +{
>> +     struct device *dev = port->dev;
>> +     struct device_node *node = dev->of_node;
>> +     struct resource regs, busn;
>> +     const char *type;
>> +     int err;
>> +
>> +     /* Check for device type */
>> +     type = of_get_property(node, "device_type", NULL);
>> +     if (!type || strcmp(type, "pci")) {
>> +             dev_err(dev, "invalid \"device_type\" %s\n", type);
>> +             return -EINVAL;
>> +     }
>> +
>> +     /* Map the register space */
>> +     err = of_address_to_resource(node, 0, &regs);
>> +     if (err) {
>> +             dev_err(dev, "missing \"reg\" property\n");
>> +             return err;
>> +     }
>> +
>> +     port->reg_base = devm_ioremap_resource(dev, &regs);
>> +     if (IS_ERR(port->reg_base))
>> +             return PTR_ERR(port->reg_base);
>> +
>> +     /* Map IRQ */
>> +     port->irq = irq_of_parse_and_map(node, 0);
>> +     err = devm_request_irq(dev, port->irq, xilinx_pcie_intr_handler,
>> +                            IRQF_SHARED, "xilinx-pcie", port);
>> +     if (err) {
>> +             dev_err(dev, "unable to request irq %d\n", port->irq);
>> +             return err;
>> +     }
>> +
>> +     /* Get the bus range */
>> +     if (of_pci_parse_bus_range(node, &busn)) {
>> +             u32 val = pcie_read(port, XILINX_PCIE_REG_BIR);
>> +             u8 last;
>> +
>> +             last = (val & XILINX_PCIE_BIR_ECAM_SZ_MASK) >>
>> +                     XILINX_PCIE_BIR_ECAM_SZ_SHIFT;
>> +
>> +             busn = (struct resource) {
>> +                     .name   = node->name,
>> +                     .start  = 0,
>> +                     .end    = last,
>> +                     .flags  = IORESOURCE_BUS,
>> +             };
>
> This doesn't actually *do* anything, does it?  You're filling in "busn",
> but that's just a local variable, and I don't see that you save the
> information anywhere.

Will fix.

>
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +/**
>> + * xilinx_pcie_probe - Probe function
>> + * @pdev: Platform device pointer
>> + *
>> + * Return: '0' on success and error value on failure
>> + */
>> +static int xilinx_pcie_probe(struct platform_device *pdev)
>> +{
>> +     struct xilinx_pcie_port *port;
>> +     struct hw_pci hw;
>> +     struct device *dev = &pdev->dev;
>> +     int err;
>> +
>> +     if (!dev->of_node)
>> +             return -ENODEV;
>> +
>> +     port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
>> +     if (!port)
>> +             return -ENOMEM;
>> +
>> +     port->dev = dev;
>> +
>> +     /* Parse the device tree */
>
> All the comments here are superfluous.

Ok, will remove.

>
>> +     err = xilinx_pcie_parse_dt(port);
>> +     if (err) {
>> +             dev_err(dev, "Parsing DT failed\n");
>> +             return err;
>> +     }
>> +
>> +     /* Initialize the hardware */
>> +     xilinx_pcie_init_port(port);
>> +
>> +     /* Setup IRQ Domain */
>> +     err = xilinx_pcie_init_irq_domain(port);
>> +     if (err) {
>> +             dev_err(dev, "Failed creating IRQ Dommain\n");
>> +             return err;
>> +     }
>> +
>> +     /* Initialize hw_pci structure */
>> +     memset(&hw, 0, sizeof(hw));
>> +     hw = (struct hw_pci) {
>> +             .nr_controllers = 1,
>> +             .private_data   = (void **)&port,
>> +             .setup          = xilinx_pcie_setup,
>> +             .map_irq        = of_irq_parse_and_map_pci,
>> +             .add_bus        = xilinx_pcie_add_bus,
>> +             .scan           = xilinx_pcie_scan_bus,
>> +             .ops            = &xilinx_pcie_ops,
>> +     };
>> +
>> +     /* Register the device */
>> +     pci_common_init_dev(dev, &hw);
>> +
>> +     platform_set_drvdata(pdev, port);
>> +
>> +     return 0;
>> +}
>> +
>> +/**
>> + * xilinx_pcie_remove - Remove function
>> + * @pdev: Platform device pointer
>> + *
>> + * Return: '0' always
>> + */
>> +static int xilinx_pcie_remove(struct platform_device *pdev)
>> +{
>> +     struct xilinx_pcie_port *port = platform_get_drvdata(pdev);
>> +
>> +     xilinx_pcie_free_irq_domain(port);
>> +
>> +     return 0;
>> +}
>> +
>> +static struct of_device_id xilinx_pcie_of_match[] = {
>> +     { .compatible = "xlnx,axi-pcie-host-1.00.a" ,},
>
> The "," inside the closing brace look unnecessary, but if you want to keep
> it, the space should go after the comma instead of before it.

Ok, I will fix all these comments in my v4.

Thanks for the review,
Srikanth

>
>> +     {}
>> +};
>> +
>> +static struct platform_driver xilinx_pcie_driver = {
>> +     .driver = {
>> +             .name = "xilinx-pcie",
>> +             .owner = THIS_MODULE,
>> +             .of_match_table = xilinx_pcie_of_match,
>> +             .suppress_bind_attrs = true,
>> +     },
>> +     .probe = xilinx_pcie_probe,
>> +     .remove = xilinx_pcie_remove,
>> +};
>> +module_platform_driver(xilinx_pcie_driver);
>> +
>> +MODULE_AUTHOR("Xilinx Inc");
>> +MODULE_DESCRIPTION("Xilinx AXI PCIe driver");
>> +MODULE_LICENSE("GPLv2");
>> --
>> 1.7.9.5
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to [e-mail]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to [e-mail]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Srikanth Thokala May 7, 2014, 11:51 a.m. UTC | #6

On Wed, Apr 30, 2014 at 9:04 PM, Arnd Bergmann <[e-mail]> wrote:
> On Tuesday 15 April 2014, Srikanth Thokala wrote:
>> +Required properties:
>> +- #address-cells: Address representation for root ports, set to <3>
>> +- #size-cells: Size representation for root ports, set to <2>
>> +- #interrupt-cells: specifies the number of cells needed to encode an
>> +     interrupt source. The value must be 1.
>> +- compatible: Should contain "xlnx,axi-pcie-host-1.00.a"
>> +- reg: Should contain AXI PCIe registers location and length
>> +- device_type: must be "pci"
>> +- interrupts: Should contain AXI PCIe interrupt
>> +- interrupt-map-mask,
>> +  interrupt-map: standard PCI properties to define the mapping of the
>> +     PCI interface to interrupt numbers.
>> +- ranges: ranges for the PCI memory regions (I/O space region is noti
>
> typo: noti -> not

Ok, will fix.

>
>> +     supported by hardware)
>> +     Please refer to the standard PCI bus binding document for a more
>> +     detailed explanation
>> +
>> +Optional properties:
>> +- bus-range: PCI bus numbers covered
>> +
>> +Interrupt controller child node
>> ++++++++++++++++++++++++++++++++
>> +Required properties:
>> +- interrupt-controller: identifies the node as an interrupt controller
>> +- #address-cells: specifies the number of cells needed to encode an
>> +     address. The value must be 0.
>> +- #interrupt-cells: specifies the number of cells needed to encode an
>> +     interrupt source. The value must be 1.
>> +
>> +NOTE:
>> +The core provides a single interrupt for both INTx/MSI messages. So,
>> +created a interrupt controller node to support 'interrupt-map' DT
>> +functionality.  The driver will create an IRQ domain for this map, decode
>> +the four INTx interrupts in ISR and route them to this domain.
>
> How does this work if the pci core is combined with a GIC version that
> also has MSI support. Presumably you'd want to use that for performance
> reason rather than the integrated MSI chip.
>
> Shouldn't there be a way to pick between the two?

I will check and come back to you on this.

>
>> +/**
>> + * xilinx_pcie_get_config_base - Get configuration base
>> + * @bus: Bus structure of current bus
>> + * @devfn: Device/function
>> + * @where: Offset from base
>> + *
>> + * Return: Base address of the configuration space needed to be
>> + *      accessed.
>> + */
>> +static void __iomem *xilinx_pcie_get_config_base(struct pci_bus *bus,
>> +                                              unsigned int devfn,
>> +                                              int where)
>> +{
>> +     struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
>> +     int relbus;
>> +
>> +     relbus = (bus->number << ECAM_BUS_NUM_SHIFT) |
>> +              (devfn << ECAM_DEV_NUM_SHIFT);
>> +
>> +     return port->reg_base + relbus + where;
>> +}
>
> Does this mean you have an ECAM-compliant config space? Nice!
>
> Would it be possible to split the config space access out into
> a separate file? It would be nice to share that with the generic
> ECAM driver that Will Deacon has sent.

Yes, it should be possible.  Is it ok, if I work on top of this driver?

>
>> +
>> +     msg.address_hi = 0;
>> +     msg.address_lo = virt_to_phys((void *)port->msg_addr);
>> +     msg.data = irq;
>> +
>> +     write_msi_msg(irq, &msg);
>
> It seems strange to pass the msg_addr as an integer referring to
> a virtual address. I'd suggest using phys_addr_t for the type
> and converting it at the point the page gets allocated, and then
> always assigning both the high and low part here. You'll need
> that anyway for 64-bit operation.

Ok, I will fix it. Thanks.

>
>> +/**
>> + * xilinx_pcie_enable_msi - Enable MSI support
>> + * @port: PCIe port information
>> + */
>> +static void xilinx_pcie_enable_msi(struct xilinx_pcie_port *port)
>> +{
>> +     port->msg_addr = __get_free_pages(GFP_KERNEL, 0);
>> +
>> +     pcie_write(port, 0x0, XILINX_PCIE_REG_MSIBASE1);
>> +     pcie_write(port, virt_to_phys((void *)port->msg_addr),
>> +                XILINX_PCIE_REG_MSIBASE2);
>> +}
>
> here too.
>
> As a general comment about the MSI implementation, I wonder if this is actually
> generic enough to be shared with other host controllers. It could be moved
> into a separate file like the config space access in that case.

I feel the MSI implementation is not generic by looking into the other
host controllers,
it is more specific to the hardware.  Correct me, if am wrong.

>
>> +/**
>> + * xilinx_pcie_init_irq_domain - Initialize IRQ domain
>> + * @port: PCIe port information
>> + *
>> + * Return: '0' on success and error value on failure
>> + */
>> +static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port)
>> +{
>> +     struct device *dev = port->dev;
>> +     struct device_node *node = dev->of_node;
>> +
>> +     if (IS_ENABLED(CONFIG_PCI_MSI)) {
>> +             /* Setup MSI */
>> +             int i;
>> +
>> +             port->irq_domain = irq_domain_add_linear(node,
>> +                                                      XILINX_NUM_MSI_IRQS,
>> +                                                      &msi_domain_ops,
>> +                                                      &xilinx_pcie_msi_chip);
>> +             if (!port->irq_domain) {
>> +                     dev_err(dev, "Failed to get a MSI IRQ domain\n");
>> +                     return PTR_ERR(port->irq_domain);
>> +             }
>> +
>> +             for (i = 0; i < XILINX_NUM_MSI_IRQS; i++)
>> +                     irq_create_mapping(port->irq_domain, i);
>
> I'm still not that familiar with the irqdomain code, but shouldn't you
> do the irq_create_mapping() in xilinx_pcie_assign_msi()?
>
> It seems wasteful to create all 128 mappings upfront.

Ok, I agree with you.  I will fix it.

>
>> +/**
>> + * xilinx_pcie_setup - Setup memory resources
>> + * @nr: Bus number
>> + * @sys: Per controller structure
>> + *
>> + * Return: '1' on success and error value on failure
>> + */
>> +static int xilinx_pcie_setup(int nr, struct pci_sys_data *sys)
>> +{
>
> I think if you move most of the code from this function into the probe()
> function, it will be easier later to add arm64 support, and you can handle
> errors better.
>
> AFAICT, the only thing you need here is to list_move() the resources
> from the xilinx_pcie_port to sys->resources. Ideally, the entire range
> parsing can go away soon, once we have generic infrastructure for that.

Sure.  I will do.

>
>
>> +     /* Register the device */
>> +     pci_common_init_dev(dev, &hw);
>> +
>> +     platform_set_drvdata(pdev, port);
>
> Don't you have to do the platform_set_drvdata() before pci_common_init_dev()?

It should be fine, as I don't see any dependencies.

Srikanth

>
>         Arnd
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to [e-mail]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to [e-mail]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Arnd Bergmann May 7, 2014, 2:35 p.m. UTC | #7

On Wednesday 07 May 2014 17:21:13 Srikanth Thokala wrote:
> On Wed, Apr 30, 2014 at 9:04 PM, Arnd Bergmann <[e-mail]> wrote:
> > On Tuesday 15 April 2014, Srikanth Thokala wrote:
> >> +/**
> >> + * xilinx_pcie_get_config_base - Get configuration base
> >> + * @bus: Bus structure of current bus
> >> + * @devfn: Device/function
> >> + * @where: Offset from base
> >> + *
> >> + * Return: Base address of the configuration space needed to be
> >> + *      accessed.
> >> + */
> >> +static void __iomem *xilinx_pcie_get_config_base(struct pci_bus *bus,
> >> +                                              unsigned int devfn,
> >> +                                              int where)
> >> +{
> >> +     struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
> >> +     int relbus;
> >> +
> >> +     relbus = (bus->number << ECAM_BUS_NUM_SHIFT) |
> >> +              (devfn << ECAM_DEV_NUM_SHIFT);
> >> +
> >> +     return port->reg_base + relbus + where;
> >> +}
> >
> > Does this mean you have an ECAM-compliant config space? Nice!
> >
> > Would it be possible to split the config space access out into
> > a separate file? It would be nice to share that with the generic
> > ECAM driver that Will Deacon has sent.
> 
> Yes, it should be possible.  Is it ok, if I work on top of this driver?

Do you mean as a follow-on patch? My feeling is that since we are trying
to merge both for 3.16, it would be good to get it done right away if
it doesn't cause too much extra work.

> >> +/**
> >> + * xilinx_pcie_enable_msi - Enable MSI support
> >> + * @port: PCIe port information
> >> + */
> >> +static void xilinx_pcie_enable_msi(struct xilinx_pcie_port *port)
> >> +{
> >> +     port->msg_addr = __get_free_pages(GFP_KERNEL, 0);
> >> +
> >> +     pcie_write(port, 0x0, XILINX_PCIE_REG_MSIBASE1);
> >> +     pcie_write(port, virt_to_phys((void *)port->msg_addr),
> >> +                XILINX_PCIE_REG_MSIBASE2);
> >> +}
> >
> > As a general comment about the MSI implementation, I wonder if this is actually
> > generic enough to be shared with other host controllers. It could be moved
> > into a separate file like the config space access in that case.
> 
> I feel the MSI implementation is not generic by looking into the other
> host controllers,
> it is more specific to the hardware.  Correct me, if am wrong.

The other host controllers are certainly incompatible, but this one looks
like it could be used on other controllers easily.

Splitting it out would also make it easier to use another MSI implementation
like the one in the GIC.


> >> +     /* Register the device */
> >> +     pci_common_init_dev(dev, &hw);
> >> +
> >> +     platform_set_drvdata(pdev, port);
> >
> > Don't you have to do the platform_set_drvdata() before pci_common_init_dev()?
> 
> It should be fine, as I don't see any dependencies.

Ah, it's only used in the remove function. It looks correct then, but I think
it would be better to set it first anyway, in case another function starts using
the drvdata later and that function may get called by the PCI initialization.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to [e-mail]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Will Deacon May 7, 2014, 2:53 p.m. UTC | #8

Hi all,

Thanks for CC'ing me, Arnd.

On Wed, May 07, 2014 at 03:35:48PM +0100, Arnd Bergmann wrote:
> On Wednesday 07 May 2014 17:21:13 Srikanth Thokala wrote:
> > On Wed, Apr 30, 2014 at 9:04 PM, Arnd Bergmann <[e-mail]> wrote:
> > > Would it be possible to split the config space access out into
> > > a separate file? It would be nice to share that with the generic
> > > ECAM driver that Will Deacon has sent.
> > 
> > Yes, it should be possible.  Is it ok, if I work on top of this driver?
> 
> Do you mean as a follow-on patch? My feeling is that since we are trying
> to merge both for 3.16, it would be good to get it done right away if
> it doesn't cause too much extra work.

Do you mean something as simple as a helper for base + offset ECAM
addressing, or something more involved that handles the mapping as well? The
latter would need some alignment on sys->private_data, I think.

Srikanth: I'll CC you on the next version of my patches (I'll send them
now).

> > > As a general comment about the MSI implementation, I wonder if this is actually
> > > generic enough to be shared with other host controllers. It could be moved
> > > into a separate file like the config space access in that case.
> > 
> > I feel the MSI implementation is not generic by looking into the other
> > host controllers,
> > it is more specific to the hardware.  Correct me, if am wrong.
> 
> The other host controllers are certainly incompatible, but this one looks
> like it could be used on other controllers easily.
> 
> Splitting it out would also make it easier to use another MSI implementation
> like the one in the GIC.

Actually, MarcZ and I already have my driver working with GICv3 + MSI. The
code basically amounts to implementing {add,remove}_bus callbacks to set
the msi_chip for the pci_bus, based on what we got out of the devicetree.
I don't think we needed anything else... Marc?

Will
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to [e-mail]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Marc Zyngier May 7, 2014, 2:58 p.m. UTC | #9

On Wed, May 07 2014 at  3:53:27 pm BST, Will Deacon <[e-mail]> wrote:
> Hi all,
>
> Thanks for CC'ing me, Arnd.
>
> On Wed, May 07, 2014 at 03:35:48PM +0100, Arnd Bergmann wrote:
>> On Wednesday 07 May 2014 17:21:13 Srikanth Thokala wrote:
>> > On Wed, Apr 30, 2014 at 9:04 PM, Arnd Bergmann <[e-mail]> wrote:
>> > > Would it be possible to split the config space access out into
>> > > a separate file? It would be nice to share that with the generic
>> > > ECAM driver that Will Deacon has sent.
>> > 
>> > Yes, it should be possible.  Is it ok, if I work on top of this driver?
>> 
>> Do you mean as a follow-on patch? My feeling is that since we are trying
>> to merge both for 3.16, it would be good to get it done right away if
>> it doesn't cause too much extra work.
>
> Do you mean something as simple as a helper for base + offset ECAM
> addressing, or something more involved that handles the mapping as well? The
> latter would need some alignment on sys->private_data, I think.
>
> Srikanth: I'll CC you on the next version of my patches (I'll send them
> now).
>
>> > > As a general comment about the MSI implementation, I wonder if
>> > > this is actually
>> > > generic enough to be shared with other host controllers. It could be moved
>> > > into a separate file like the config space access in that case.
>> > 
>> > I feel the MSI implementation is not generic by looking into the other
>> > host controllers,
>> > it is more specific to the hardware.  Correct me, if am wrong.
>> 
>> The other host controllers are certainly incompatible, but this one looks
>> like it could be used on other controllers easily.
>> 
>> Splitting it out would also make it easier to use another MSI implementation
>> like the one in the GIC.
>
> Actually, MarcZ and I already have my driver working with GICv3 + MSI. The
> code basically amounts to implementing {add,remove}_bus callbacks to set
> the msi_chip for the pci_bus, based on what we got out of the devicetree.
> I don't think we needed anything else... Marc?

No, that's it, really. I use the "msi-parent" property to find the
msi_chip, which should have been registered as a "msi-controller".

	M.

Srikanth Thokala May 8, 2014, 1:28 p.m. UTC | #10

On Wed, May 7, 2014 at 8:05 PM, Arnd Bergmann <[e-mail]> wrote:
> On Wednesday 07 May 2014 17:21:13 Srikanth Thokala wrote:
>> On Wed, Apr 30, 2014 at 9:04 PM, Arnd Bergmann <[e-mail]> wrote:
>> > On Tuesday 15 April 2014, Srikanth Thokala wrote:
>> >> +/**
>> >> + * xilinx_pcie_get_config_base - Get configuration base
>> >> + * @bus: Bus structure of current bus
>> >> + * @devfn: Device/function
>> >> + * @where: Offset from base
>> >> + *
>> >> + * Return: Base address of the configuration space needed to be
>> >> + *      accessed.
>> >> + */
>> >> +static void __iomem *xilinx_pcie_get_config_base(struct pci_bus *bus,
>> >> +                                              unsigned int devfn,
>> >> +                                              int where)
>> >> +{
>> >> +     struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
>> >> +     int relbus;
>> >> +
>> >> +     relbus = (bus->number << ECAM_BUS_NUM_SHIFT) |
>> >> +              (devfn << ECAM_DEV_NUM_SHIFT);
>> >> +
>> >> +     return port->reg_base + relbus + where;
>> >> +}
>> >
>> > Does this mean you have an ECAM-compliant config space? Nice!
>> >
>> > Would it be possible to split the config space access out into
>> > a separate file? It would be nice to share that with the generic
>> > ECAM driver that Will Deacon has sent.
>>
>> Yes, it should be possible.  Is it ok, if I work on top of this driver?
>
> Do you mean as a follow-on patch? My feeling is that since we are trying
> to merge both for 3.16, it would be good to get it done right away if
> it doesn't cause too much extra work.

Sure, I will work with Will and let you know.

>
>> >> +/**
>> >> + * xilinx_pcie_enable_msi - Enable MSI support
>> >> + * @port: PCIe port information
>> >> + */
>> >> +static void xilinx_pcie_enable_msi(struct xilinx_pcie_port *port)
>> >> +{
>> >> +     port->msg_addr = __get_free_pages(GFP_KERNEL, 0);
>> >> +
>> >> +     pcie_write(port, 0x0, XILINX_PCIE_REG_MSIBASE1);
>> >> +     pcie_write(port, virt_to_phys((void *)port->msg_addr),
>> >> +                XILINX_PCIE_REG_MSIBASE2);
>> >> +}
>> >
>> > As a general comment about the MSI implementation, I wonder if this is actually
>> > generic enough to be shared with other host controllers. It could be moved
>> > into a separate file like the config space access in that case.
>>
>> I feel the MSI implementation is not generic by looking into the other
>> host controllers,
>> it is more specific to the hardware.  Correct me, if am wrong.
>
> The other host controllers are certainly incompatible, but this one looks
> like it could be used on other controllers easily.
>
> Splitting it out would also make it easier to use another MSI implementation
> like the one in the GIC.

I need to look into this and I will come back to you.

>
>
>> >> +     /* Register the device */
>> >> +     pci_common_init_dev(dev, &hw);
>> >> +
>> >> +     platform_set_drvdata(pdev, port);
>> >
>> > Don't you have to do the platform_set_drvdata() before pci_common_init_dev()?
>>
>> It should be fine, as I don't see any dependencies.
>
> Ah, it's only used in the remove function. It looks correct then, but I think
> it would be better to set it first anyway, in case another function starts using
> the drvdata later and that function may get called by the PCI initialization.

Ok.

Srikanth

>
>         Arnd
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to [e-mail]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to [e-mail]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
new file mode 100644
index 0000000..2fb28e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
@@ -0,0 +1,62 @@ 
+* Xilinx AXI PCIe Root Port Bridge DT description
+
+Required properties:
+- #address-cells: Address representation for root ports, set to <3>
+- #size-cells: Size representation for root ports, set to <2>
+- #interrupt-cells: specifies the number of cells needed to encode an
+	interrupt source. The value must be 1.
+- compatible: Should contain "xlnx,axi-pcie-host-1.00.a"
+- reg: Should contain AXI PCIe registers location and length
+- device_type: must be "pci"
+- interrupts: Should contain AXI PCIe interrupt
+- interrupt-map-mask,
+  interrupt-map: standard PCI properties to define the mapping of the
+	PCI interface to interrupt numbers.
+- ranges: ranges for the PCI memory regions (I/O space region is noti
+	supported by hardware)
+	Please refer to the standard PCI bus binding document for a more
+	detailed explanation
+
+Optional properties:
+- bus-range: PCI bus numbers covered
+
+Interrupt controller child node
++++++++++++++++++++++++++++++++
+Required properties:
+- interrupt-controller: identifies the node as an interrupt controller
+- #address-cells: specifies the number of cells needed to encode an
+	address. The value must be 0.
+- #interrupt-cells: specifies the number of cells needed to encode an
+	interrupt source. The value must be 1.
+
+NOTE:
+The core provides a single interrupt for both INTx/MSI messages. So,
+created a interrupt controller node to support 'interrupt-map' DT
+functionality.  The driver will create an IRQ domain for this map, decode
+the four INTx interrupts in ISR and route them to this domain.
+
+
+Example:
+++++++++
+
+	pci_express: axi-pcie@50000000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		compatible = "xlnx,axi-pcie-host-1.00.a";
+		reg = < 0x50000000 0x10000000 >;
+		device_type = "pci";
+		interrupts = < 0 52 4 >;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc 1>,
+				<0 0 0 2 &pcie_intc 2>,
+				<0 0 0 3 &pcie_intc 3>,
+				<0 0 0 4 &pcie_intc 4>;
+		ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >;
+
+		pcie_intc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		}
+	};
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index a6f67ec..71afdcd 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -33,4 +33,11 @@  config PCI_RCAR_GEN2
 	  There are 3 internal PCI controllers available with a single
 	  built-in EHCI/OHCI host controller present on each one.
 
+config PCI_XILINX
+	bool "Xilinx AXI PCIe host bridge support"
+	depends on ARCH_ZYNQ
+	help
+	  Say 'Y' here if you want kernel to support the Xilinx AXI PCIe
+	  Host Bridge driver.
+
 endmenu
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 13fb333..4e9c843 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -4,3 +4,4 @@  obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
 obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
 obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
 obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
+obj-$(CONFIG_PCI_XILINX) += pci-xilinx.o
diff --git a/drivers/pci/host/pci-xilinx.c b/drivers/pci/host/pci-xilinx.c
new file mode 100644
index 0000000..d9afe66
--- /dev/null
+++ b/drivers/pci/host/pci-xilinx.c
@@ -0,0 +1,999 @@ 
+/*
+ * PCIe host controller driver for Xilinx AXI PCIe Bridge
+ *
+ * Copyright (c) 2012 - 2014 Xilinx, Inc.
+ *
+ * Based on the Tegra PCIe driver
+ *
+ * Bits taken from Synopsys Designware Host controller driver and
+ * ARM PCI Host generic driver.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/msi.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+/* Register definitions */
+#define XILINX_PCIE_REG_VSECC		0x00000128
+#define XILINX_PCIE_REG_VSECH		0x0000012c
+#define XILINX_PCIE_REG_BIR		0x00000130
+#define XILINX_PCIE_REG_BSCR		0x00000134
+#define XILINX_PCIE_REG_IDR		0x00000138
+#define XILINX_PCIE_REG_IMR		0x0000013c
+#define XILINX_PCIE_REG_BLR		0x00000140
+#define XILINX_PCIE_REG_PSCR		0x00000144
+#define XILINX_PCIE_REG_RPSC		0x00000148
+#define XILINX_PCIE_REG_MSIBASE1	0x0000014c
+#define XILINX_PCIE_REG_MSIBASE2	0x00000150
+#define XILINX_PCIE_REG_RPEFR		0x00000154
+#define XILINX_PCIE_REG_RPIFR1		0x00000158
+#define XILINX_PCIE_REG_RPIFR2		0x0000015c
+#define XILINX_PCIE_REG_VSECC2		0x00000200
+#define XILINX_PCIE_REG_VSECH2		0x00000204
+
+/* Interrupt registers definitions */
+#define XILINX_PCIE_INTR_LINK_DOWN	BIT(0)
+#define XILINX_PCIE_INTR_ECRC_ERR	BIT(1)
+#define XILINX_PCIE_INTR_STR_ERR	BIT(2)
+#define XILINX_PCIE_INTR_HOT_RESET	BIT(3)
+#define XILINX_PCIE_INTR_CFG_COMPL	GENMASK(7, 5)
+#define XILINX_PCIE_INTR_CFG_TIMEOUT	BIT(8)
+#define XILINX_PCIE_INTR_CORRECTABLE	BIT(9)
+#define XILINX_PCIE_INTR_NONFATAL	BIT(10)
+#define XILINX_PCIE_INTR_FATAL		BIT(11)
+#define XILINX_PCIE_INTR_INTX		BIT(16)
+#define XILINX_PCIE_INTR_MSI		BIT(17)
+#define XILINX_PCIE_INTR_SLV_UNSUPP	BIT(20)
+#define XILINX_PCIE_INTR_SLV_UNEXP	BIT(21)
+#define XILINX_PCIE_INTR_SLV_COMPL	BIT(22)
+#define XILINX_PCIE_INTR_SLV_ERRP	BIT(23)
+#define XILINX_PCIE_INTR_SLV_CMPABT	BIT(24)
+#define XILINX_PCIE_INTR_SLV_ILLBUR	BIT(25)
+#define XILINX_PCIE_INTR_MST_DECERR	BIT(26)
+#define XILINX_PCIE_INTR_MST_SLVERR	BIT(27)
+#define XILINX_PCIE_INTR_MST_ERRP	BIT(28)
+#define XILINX_PCIE_IMR_ALL_MASK	0x1FF30FED
+#define XILINX_PCIE_IDR_ALL_MASK	0xFFFFFFFF
+
+/* Root Port Error FIFO Read Register definitions */
+#define XILINX_PCIE_RPEFR_ERR_VALID	BIT(18)
+#define XILINX_PCIE_RPEFR_REQ_ID	GENMASK(15, 0)
+#define XILINX_PCIE_RPEFR_ALL_MASK	0xFFFFFFFF
+
+/* Root Port Interrupt FIFO Read Register 1 definitions */
+#define XILINX_PCIE_RPIFR1_INTR_VALID	BIT(31)
+#define XILINX_PCIE_RPIFR1_MSI_INTR	BIT(30)
+#define XILINX_PCIE_RPIFR1_INTR_ASSRT	BIT(29)
+#define XILINX_PCIE_RPIFR1_INTR_MASK	GENMASK(28, 27)
+#define XILINX_PCIE_RPIFR1_MSI_ADR_MASK	GENMASK(26, 16)
+#define XILINX_PCIE_RPIFR1_ALL_MASK	0xFFFFFFFF
+#define XILINX_PCIE_RPIFR1_INTR_SHIFT		27
+#define XILINX_PCIE_RPIFR1_MSI_ADR_SHIFT	16
+
+/* Bridge Info Register definitions */
+#define XILINX_PCIE_BIR_ECAM_SZ_MASK	GENMASK(18, 16)
+#define XILINX_PCIE_BIR_ECAM_SZ_SHIFT	16
+
+/* Root Port Interrupt FIFO Read Register 2 definitions */
+#define XILINX_PCIE_RPIFR2_MSG_DATA	GENMASK(15, 0)
+
+/* Root Port Status/control Register definitions */
+#define XILINX_PCIE_REG_RPSC_BEN	BIT(0)
+
+/* Phy Status/Control Register definitions */
+#define XILINX_PCIE_REG_PSCR_LNKUP	BIT(11)
+
+/* ECAM definitions */
+#define ECAM_BUS_NUM_SHIFT		20
+#define ECAM_DEV_NUM_SHIFT		12
+
+/* PCI Configuration space Bus Number Register definitions */
+#define PCI_SECONDARY_BUS_NUM_SHIFT	8
+#define PCI_SUBORDINATE_BUS_NUM_SHIFT	16
+#define PCI_LATENCY_TIMER_MASK		GENMASK(31, 24)
+
+/* Number of MSI IRQs */
+#define XILINX_NUM_MSI_IRQS		128
+
+/* Number of Memory Resources */
+#define XILINX_MAX_NUM_RESOURCES	3
+
+/**
+ * struct xilinx_pcie_port - PCIe port information
+ * @reg_base: IO Mapped Register Base
+ * @irq: Interrupt number
+ * @msg_addr: MSI message address
+ * @root_busno: Root Bus number
+ * @link_up: Link status flag
+ * @dev: Device pointer
+ * @irq_domain: IRQ domain pointer
+ */
+struct xilinx_pcie_port {
+	void __iomem *reg_base;
+	u32 irq;
+	unsigned long msg_addr;
+	u8 root_busno;
+	bool link_up;
+	struct device *dev;
+	struct irq_domain *irq_domain;
+};
+
+static DECLARE_BITMAP(msi_irq_in_use, XILINX_NUM_MSI_IRQS);
+
+static inline struct xilinx_pcie_port *sys_to_pcie(struct pci_sys_data *sys)
+{
+	return sys->private_data;
+}
+
+static inline u32 pcie_read(struct xilinx_pcie_port *port, u32 reg)
+{
+	return readl(port->reg_base + reg);
+}
+
+static inline void pcie_write(struct xilinx_pcie_port *port,
+			      u32 val, u32 reg)
+{
+	writel(val, port->reg_base + reg);
+}
+
+static inline bool xilinx_pcie_is_link_up(struct xilinx_pcie_port *port)
+{
+	return (pcie_read(port, XILINX_PCIE_REG_PSCR) &
+		XILINX_PCIE_REG_PSCR_LNKUP) ? 1 : 0;
+}
+
+/**
+ * xilinx_pcie_clear_err_interrupts - Clear Error Interrupts
+ * @port: PCIe port information
+ */
+static inline void
+xilinx_pcie_clear_err_interrupts(struct xilinx_pcie_port *port)
+{
+	u32 val = pcie_read(port, XILINX_PCIE_REG_RPEFR);
+
+	if (val & XILINX_PCIE_RPEFR_ERR_VALID) {
+		dev_dbg(port->dev, "Requester ID %d\n",
+			val & XILINX_PCIE_RPEFR_REQ_ID);
+		pcie_write(port, XILINX_PCIE_RPEFR_ALL_MASK,
+			   XILINX_PCIE_REG_RPEFR);
+	}
+}
+
+/**
+ * xilinx_pcie_verify_config - Verify configuration
+ * @bus: Bus structure of current bus
+ * @devfn: device/function
+ *
+ * Return: 0 on success and PCIBIOS_DEVICE_NOT_FOUND on error
+ */
+static int xilinx_pcie_verify_config(struct pci_bus *bus,
+				     unsigned int devfn)
+{
+	struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
+
+	/* Check if link is up when trying to access downstream ports */
+	if (bus->number != port->root_busno)
+		if (!xilinx_pcie_is_link_up(port))
+			return 0;
+
+	/* Only one device down on each root port */
+	if (bus->number == port->root_busno && devfn > 0)
+		return 0;
+
+	/*
+	 * Do not read more than one device on the bus directly attached
+	 * to RC.
+	 */
+	if (bus->primary == port->root_busno && devfn > 0)
+		return 0;
+
+	return 1;
+}
+
+/**
+ * xilinx_pcie_get_config_base - Get configuration base
+ * @bus: Bus structure of current bus
+ * @devfn: Device/function
+ * @where: Offset from base
+ *
+ * Return: Base address of the configuration space needed to be
+ *	   accessed.
+ */
+static void __iomem *xilinx_pcie_get_config_base(struct pci_bus *bus,
+						 unsigned int devfn,
+						 int where)
+{
+	struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
+	int relbus;
+
+	relbus = (bus->number << ECAM_BUS_NUM_SHIFT) |
+		 (devfn << ECAM_DEV_NUM_SHIFT);
+
+	return port->reg_base + relbus + where;
+}
+
+/**
+ * xilinx_pcie_read_config - Read configuration space
+ * @bus: Bus structure of current bus
+ * @devfn: Device/function
+ * @where: Offset from base
+ * @size: Byte/word/dword
+ * @val: Value to be read
+ *
+ * Return: PCIBIOS_SUCCESSFUL on success
+ *	   EINVAL/PCIBIOS_DEVICE_NOT_FOUND/PCIBIOS_BAD_REGISTER_NUMBER
+ *	   on failure.
+ */
+static int xilinx_pcie_read_config(struct pci_bus *bus,
+				   unsigned int devfn, int where,
+				   int size, u32 *val)
+{
+	struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
+	void __iomem *addr;
+
+	if (!port) {
+		BUG();
+		return -EINVAL;
+	}
+
+	if (!xilinx_pcie_verify_config(bus, devfn)) {
+		*val = 0xFFFFFFFF;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	addr = xilinx_pcie_get_config_base(bus, devfn, where);
+
+	switch (size) {
+	case 1:
+		*val = readb(addr);
+		break;
+	case 2:
+		*val = readw(addr);
+		break;
+	default:
+		*val = readl(addr);
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+/**
+ * xilinx_pcie_write_config - Write configuration space
+ * @bus: Bus structure of current bus
+ * @devfn: Device/function
+ * @where: Offset from base
+ * @size: Byte/word/dword
+ * @val: Value to be written to device
+ *
+ * Return: PCIBIOS_SUCCESSFUL on success,
+ *	   EINVAL/PCIBIOS_DEVICE_NOT_FOUND/PCIBIOS_BAD_REGISTER_NUMBER
+ *	   on failure.
+ */
+static int xilinx_pcie_write_config(struct pci_bus *bus,
+				    unsigned int devfn, int where,
+				    int size, u32 val)
+{
+	struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
+	void __iomem *addr;
+
+	if (!port) {
+		BUG();
+		return -EINVAL;
+	}
+
+	if (!xilinx_pcie_verify_config(bus, devfn))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	addr = xilinx_pcie_get_config_base(bus, devfn, where);
+
+	switch (size) {
+	case 1:
+		writeb(val, addr);
+		break;
+	case 2:
+		writew(val, addr);
+		break;
+	default:
+		writel(val, addr);
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+/* PCIe operations */
+static struct pci_ops xilinx_pcie_ops = {
+	.read  = xilinx_pcie_read_config,
+	.write = xilinx_pcie_write_config,
+};
+
+/* MSI functions */
+
+/**
+ * xilinx_pcie_destroy_msi - Free MSI number
+ * @irq: IRQ to be freed
+ */
+static void xilinx_pcie_destroy_msi(unsigned int irq)
+{
+	struct irq_desc *desc;
+	struct msi_desc *msi;
+	struct xilinx_pcie_port *port;
+
+	desc = irq_to_desc(irq);
+	msi = irq_desc_get_msi_desc(desc);
+	port = sys_to_pcie(msi->dev->bus->sysdata);
+	if (!port) {
+		BUG();
+		return;
+	}
+
+	if (!test_bit(irq, msi_irq_in_use))
+		dev_err(port->dev, "Trying to free unused MSI#%d\n", irq);
+	else
+		clear_bit(irq, msi_irq_in_use);
+}
+
+/**
+ * xilinx_pcie_assign_msi - Allocate MSI number
+ * @port: PCIe port structure
+ *
+ * Return: A valid IRQ on success and error value on failure.
+ */
+static int xilinx_pcie_assign_msi(struct xilinx_pcie_port *port)
+{
+	int pos;
+
+	pos = find_first_zero_bit(msi_irq_in_use, XILINX_NUM_MSI_IRQS);
+	if (pos < XILINX_NUM_MSI_IRQS)
+		set_bit(pos, msi_irq_in_use);
+	else
+		return -ENOSPC;
+
+	return irq_find_mapping(port->irq_domain, pos);
+}
+
+/**
+ * xilinx_msi_teardown_irq - Destroy the MSI
+ * @chip: MSI Chip descriptor
+ * @irq: MSI IRQ to destroy
+ */
+static void xilinx_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+{
+	xilinx_pcie_destroy_msi(irq);
+}
+
+/**
+ * xilinx_pcie_msi_setup_irq - Setup MSI request
+ * @chip: MSI chip pointer
+ * @pdev: PCIe device pointer
+ * @desc: MSI descriptor pointer
+ *
+ * Return: '0' on success and error value on failure
+ */
+static int xilinx_pcie_msi_setup_irq(struct msi_chip *chip,
+				     struct pci_dev *pdev,
+				     struct msi_desc *desc)
+{
+	struct xilinx_pcie_port *port = sys_to_pcie(pdev->bus->sysdata);
+	int irq;
+	struct msi_msg msg;
+
+	if (!port) {
+		BUG();
+		return -EINVAL;
+	}
+
+	irq = xilinx_pcie_assign_msi(port);
+	if (irq < 0)
+		return irq;
+
+	irq_set_msi_desc(irq, desc);
+
+	msg.address_hi = 0;
+	msg.address_lo = virt_to_phys((void *)port->msg_addr);
+	msg.data = irq;
+
+	write_msi_msg(irq, &msg);
+
+	return 0;
+}
+
+/* MSI Chip Descriptor */
+static struct msi_chip xilinx_pcie_msi_chip = {
+	.setup_irq = xilinx_pcie_msi_setup_irq,
+	.teardown_irq = xilinx_msi_teardown_irq,
+};
+
+/* HW Interrupt Chip Descriptor */
+static struct irq_chip xilinx_msi_irq_chip = {
+	.name = "Xilinx PCIe MSI",
+	.irq_enable = unmask_msi_irq,
+	.irq_disable = mask_msi_irq,
+	.irq_mask = mask_msi_irq,
+	.irq_unmask = unmask_msi_irq,
+};
+
+/**
+ * xilinx_pcie_msi_map - Set the handler for the MSI and mark IRQ as valid
+ * @domain: IRQ domain
+ * @irq: Virtual IRQ number
+ * @hwirq: HW interrupt number
+ *
+ * Return: Always returns 0.
+ */
+static int xilinx_pcie_msi_map(struct irq_domain *domain, unsigned int irq,
+			       irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(irq, &xilinx_msi_irq_chip, handle_simple_irq);
+	irq_set_chip_data(irq, domain->host_data);
+	set_irq_flags(irq, IRQF_VALID);
+
+	return 0;
+}
+
+/* IRQ Domain operations */
+static const struct irq_domain_ops msi_domain_ops = {
+	.map = xilinx_pcie_msi_map,
+};
+
+/**
+ * xilinx_pcie_enable_msi - Enable MSI support
+ * @port: PCIe port information
+ */
+static void xilinx_pcie_enable_msi(struct xilinx_pcie_port *port)
+{
+	port->msg_addr = __get_free_pages(GFP_KERNEL, 0);
+
+	pcie_write(port, 0x0, XILINX_PCIE_REG_MSIBASE1);
+	pcie_write(port, virt_to_phys((void *)port->msg_addr),
+		   XILINX_PCIE_REG_MSIBASE2);
+}
+
+/**
+ * xilinx_pcie_add_bus - Add MSI chip info to PCIe bus
+ * @bus: PCIe bus
+ */
+static void xilinx_pcie_add_bus(struct pci_bus *bus)
+{
+	if (IS_ENABLED(CONFIG_PCI_MSI)) {
+		struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
+
+		if (!port)
+			return;
+
+		xilinx_pcie_msi_chip.dev = port->dev;
+		bus->msi = &xilinx_pcie_msi_chip;
+	}
+}
+
+/* INTx Functions */
+
+/**
+ * xilinx_pcie_intx_map - Set the handler for the INTx and mark IRQ as valid
+ * @domain: IRQ domain
+ * @irq: Virtual IRQ number
+ * @hwirq: HW interrupt number
+ *
+ * Return: Always returns 0.
+ */
+static int xilinx_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
+				irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);
+	irq_set_chip_data(irq, domain->host_data);
+	set_irq_flags(irq, IRQF_VALID);
+
+	return 0;
+}
+
+/* INTx IRQ Domain operations */
+static const struct irq_domain_ops intx_domain_ops = {
+	.map = xilinx_pcie_intx_map,
+};
+
+/* PCIe HW Functions */
+
+/**
+ * xilinx_pcie_intr_handler - Interrupt Service Handler
+ * @irq: IRQ number
+ * @data: PCIe port information
+ *
+ * Return: IRQ_HANDLED on success and IRQ_NONE on failure
+ */
+static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data)
+{
+	struct xilinx_pcie_port *port = (struct xilinx_pcie_port *)data;
+	u32 val, mask, status, msi_data;
+
+	/* Read interrupt decode and mask registers */
+	val = pcie_read(port, XILINX_PCIE_REG_IDR);
+	mask = pcie_read(port, XILINX_PCIE_REG_IMR);
+
+	status = val & mask;
+	if (!status)
+		return IRQ_NONE;
+
+	if (status & XILINX_PCIE_INTR_LINK_DOWN)
+		dev_warn(port->dev, "Link Down\n");
+
+	if (status & XILINX_PCIE_INTR_ECRC_ERR)
+		dev_warn(port->dev, "ECRC failed\n");
+
+	if (status & XILINX_PCIE_INTR_STR_ERR)
+		dev_warn(port->dev, "Streaming error\n");
+
+	if (status & XILINX_PCIE_INTR_HOT_RESET)
+		dev_info(port->dev, "Hot reset\n");
+
+	if (status & XILINX_PCIE_INTR_CFG_TIMEOUT)
+		dev_warn(port->dev, "ECAM access timeout\n");
+
+	if (status & XILINX_PCIE_INTR_CORRECTABLE) {
+		dev_warn(port->dev, "Correctable error message\n");
+		xilinx_pcie_clear_err_interrupts(port);
+	}
+
+	if (status & XILINX_PCIE_INTR_NONFATAL) {
+		dev_warn(port->dev, "Non fatal error message\n");
+		xilinx_pcie_clear_err_interrupts(port);
+	}
+
+	if (status & XILINX_PCIE_INTR_FATAL) {
+		dev_warn(port->dev, "Fatal error message\n");
+		xilinx_pcie_clear_err_interrupts(port);
+	}
+
+	if (status & XILINX_PCIE_INTR_INTX) {
+		/* INTx interrupt received */
+		val = pcie_read(port, XILINX_PCIE_REG_RPIFR1);
+
+		/* Check whether interrupt valid */
+		if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) {
+			dev_warn(port->dev, "RP Intr FIFO1 read error\n");
+			return IRQ_HANDLED;
+		}
+
+		/* Clear interrupt FIFO register 1 */
+		pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK,
+			   XILINX_PCIE_REG_RPIFR1);
+
+		/* Handle INTx Interrupt */
+		val = ((val & XILINX_PCIE_RPIFR1_INTR_MASK) >>
+			XILINX_PCIE_RPIFR1_INTR_SHIFT) + 1;
+		generic_handle_irq(irq_find_mapping(port->irq_domain, val));
+	}
+
+	if (status & XILINX_PCIE_INTR_MSI) {
+		/* MSI Interrupt */
+		val = pcie_read(port, XILINX_PCIE_REG_RPIFR1);
+
+		if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) {
+			dev_warn(port->dev, "RP Intr FIFO1 read error\n");
+			return IRQ_HANDLED;
+		}
+
+		if (val & XILINX_PCIE_RPIFR1_MSI_INTR) {
+			msi_data = pcie_read(port, XILINX_PCIE_REG_RPIFR2) &
+				   XILINX_PCIE_RPIFR2_MSG_DATA;
+
+			/* Clear interrupt FIFO register 1 */
+			pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK,
+				   XILINX_PCIE_REG_RPIFR1);
+
+			if (IS_ENABLED(CONFIG_PCI_MSI)) {
+				/* Handle MSI Interrupt */
+				generic_handle_irq(msi_data);
+			}
+		}
+	}
+
+	if (status & XILINX_PCIE_INTR_SLV_UNSUPP)
+		dev_warn(port->dev, "Slave unsupported request\n");
+
+	if (status & XILINX_PCIE_INTR_SLV_UNEXP)
+		dev_warn(port->dev, "Slave unexpected completion\n");
+
+	if (status & XILINX_PCIE_INTR_SLV_COMPL)
+		dev_warn(port->dev, "Slave completion timeout\n");
+
+	if (status & XILINX_PCIE_INTR_SLV_ERRP)
+		dev_warn(port->dev, "Slave Error Poison\n");
+
+	if (status & XILINX_PCIE_INTR_SLV_CMPABT)
+		dev_warn(port->dev, "Slave Completer Abort\n");
+
+	if (status & XILINX_PCIE_INTR_SLV_ILLBUR)
+		dev_warn(port->dev, "Slave Illegal Burst\n");
+
+	if (status & XILINX_PCIE_INTR_MST_DECERR)
+		dev_warn(port->dev, "Master decode error\n");
+
+	if (status & XILINX_PCIE_INTR_MST_SLVERR)
+		dev_warn(port->dev, "Master slave error\n");
+
+	if (status & XILINX_PCIE_INTR_MST_ERRP)
+		dev_warn(port->dev, "Master error poison\n");
+
+	/* Clear the Interrupt Decode register */
+	pcie_write(port, status, XILINX_PCIE_REG_IDR);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * xilinx_pcie_free_irq_domain - Free IRQ domain
+ * @port: PCIe port information
+ */
+static void xilinx_pcie_free_irq_domain(struct xilinx_pcie_port *port)
+{
+	int i;
+	u32 irq, num_irqs;
+
+	/* Free IRQ Domain */
+	if (IS_ENABLED(CONFIG_PCI_MSI)) {
+		free_pages(port->msg_addr, 0);
+
+		num_irqs = XILINX_NUM_MSI_IRQS;
+	} else {
+		/* INTx */
+		num_irqs = 4;
+	}
+
+	for (i = 0; i < num_irqs; i++) {
+		irq = irq_find_mapping(port->irq_domain, i);
+		if (irq > 0)
+			irq_dispose_mapping(irq);
+	}
+
+	irq_domain_remove(port->irq_domain);
+}
+
+/**
+ * xilinx_pcie_init_irq_domain - Initialize IRQ domain
+ * @port: PCIe port information
+ *
+ * Return: '0' on success and error value on failure
+ */
+static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port)
+{
+	struct device *dev = port->dev;
+	struct device_node *node = dev->of_node;
+
+	if (IS_ENABLED(CONFIG_PCI_MSI)) {
+		/* Setup MSI */
+		int i;
+
+		port->irq_domain = irq_domain_add_linear(node,
+							 XILINX_NUM_MSI_IRQS,
+							 &msi_domain_ops,
+							 &xilinx_pcie_msi_chip);
+		if (!port->irq_domain) {
+			dev_err(dev, "Failed to get a MSI IRQ domain\n");
+			return PTR_ERR(port->irq_domain);
+		}
+
+		for (i = 0; i < XILINX_NUM_MSI_IRQS; i++)
+			irq_create_mapping(port->irq_domain, i);
+
+		xilinx_pcie_enable_msi(port);
+	} else {
+		/* Setup INTx */
+		struct device_node *pcie_intc_node =
+				 of_get_next_child(node, NULL);
+
+		if (!pcie_intc_node) {
+			dev_err(dev, "No PCIe Intc node found\n");
+			return PTR_ERR(pcie_intc_node);
+		}
+
+		port->irq_domain = irq_domain_add_linear(pcie_intc_node, 4,
+							 &intx_domain_ops,
+							 port);
+		if (!port->irq_domain) {
+			dev_err(dev, "Failed to get a INTx IRQ domain\n");
+			return PTR_ERR(port->irq_domain);
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * xilinx_pcie_init_port - Initialize hardware
+ * @port: PCIe port information
+ */
+static void xilinx_pcie_init_port(struct xilinx_pcie_port *port)
+{
+	/* Check if PCIe link is up? */
+	port->link_up = xilinx_pcie_is_link_up(port);
+	if (!port->link_up)
+		dev_info(port->dev, "PCIe Link is DOWN\n");
+	else
+		dev_info(port->dev, "PCIe Link is UP\n");
+
+	/* Disable all interrupts*/
+	pcie_write(port, ~XILINX_PCIE_IDR_ALL_MASK,
+		   XILINX_PCIE_REG_IMR);
+
+	/* Clear pending interrupts */
+	pcie_write(port, pcie_read(port, XILINX_PCIE_REG_IDR) &
+			 XILINX_PCIE_IMR_ALL_MASK,
+		   XILINX_PCIE_REG_IDR);
+
+	/* Enable all interrupts*/
+	pcie_write(port, XILINX_PCIE_IMR_ALL_MASK, XILINX_PCIE_REG_IMR);
+
+	/* Enable the Bridge enable bit */
+	pcie_write(port, pcie_read(port, XILINX_PCIE_REG_RPSC) |
+			 XILINX_PCIE_REG_RPSC_BEN,
+		   XILINX_PCIE_REG_RPSC);
+}
+
+/**
+ * xilinx_pcie_setup - Setup memory resources
+ * @nr: Bus number
+ * @sys: Per controller structure
+ *
+ * Return: '1' on success and error value on failure
+ */
+static int xilinx_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+	struct xilinx_pcie_port *port = sys_to_pcie(sys);
+	struct device *dev = port->dev;
+	struct device_node *node = dev->of_node;
+	struct resource *mem;
+	resource_size_t offset;
+	struct of_pci_range_parser parser;
+	struct of_pci_range range;
+	struct pci_host_bridge_window *win;
+	int err = 0, mem_resno = 0;
+
+	/* Get the ranges */
+	if (of_pci_range_parser_init(&parser, node)) {
+		dev_err(dev, "missing \"ranges\" property\n");
+		return -EINVAL;
+	}
+
+	/* Parse the ranges and add the resources found to the list */
+	for_each_of_pci_range(&parser, &range) {
+
+		if (mem_resno >= XILINX_MAX_NUM_RESOURCES) {
+			dev_err(dev, "Maximum memory resources exceeded\n");
+			return -EINVAL;
+		}
+
+		mem = devm_kmalloc(dev, sizeof(*mem), GFP_KERNEL);
+		if (!mem) {
+			err = -ENOMEM;
+			goto free_resources;
+		}
+
+		of_pci_range_to_resource(&range, node, mem);
+
+		switch (mem->flags & IORESOURCE_TYPE_BITS) {
+		case IORESOURCE_MEM:
+			offset = range.cpu_addr - range.pci_addr;
+			mem_resno++;
+			break;
+		default:
+			err = -EINVAL;
+			break;
+		}
+
+		if (err < 0) {
+			dev_warn(dev, "Invalid resource found\n");
+			continue;
+		}
+
+		err = request_resource(&iomem_resource, mem);
+		if (err)
+			goto free_resources;
+
+		pci_add_resource_offset(&sys->resources, mem, offset);
+	}
+
+	return 1;
+
+free_resources:
+	release_child_resources(&iomem_resource);
+	list_for_each_entry(win, &sys->resources, list)
+		devm_kfree(dev, win->res);
+	pci_free_resource_list(&sys->resources);
+
+	return err;
+}
+
+/**
+ * xilinx_pcie_scan_bus - Scan PCIe bus for devices
+ * @nr: Bus number
+ * @sys: Per controller structure
+ *
+ * Return: Valid Bus pointer on success and NULL on failure
+ */
+static struct pci_bus __init *xilinx_pcie_scan_bus(int nr,
+						   struct pci_sys_data *sys)
+{
+	struct xilinx_pcie_port *port = sys_to_pcie(sys);
+	struct pci_bus *bus;
+
+	if (port) {
+		port->root_busno = sys->busnr;
+		bus = pci_scan_root_bus(port->dev, sys->busnr, &xilinx_pcie_ops,
+					sys, &sys->resources);
+	} else {
+		bus = NULL;
+		BUG();
+	}
+
+	return bus;
+}
+
+/**
+ * xilinx_pcie_parse_dt - Parse Device tree
+ * @port: PCIe port information
+ *
+ * Return: '0' on success and error value on failure
+ */
+static int xilinx_pcie_parse_dt(struct xilinx_pcie_port *port)
+{
+	struct device *dev = port->dev;
+	struct device_node *node = dev->of_node;
+	struct resource regs, busn;
+	const char *type;
+	int err;
+
+	/* Check for device type */
+	type = of_get_property(node, "device_type", NULL);
+	if (!type || strcmp(type, "pci")) {
+		dev_err(dev, "invalid \"device_type\" %s\n", type);
+		return -EINVAL;
+	}
+
+	/* Map the register space */
+	err = of_address_to_resource(node, 0, &regs);
+	if (err) {
+		dev_err(dev, "missing \"reg\" property\n");
+		return err;
+	}
+
+	port->reg_base = devm_ioremap_resource(dev, &regs);
+	if (IS_ERR(port->reg_base))
+		return PTR_ERR(port->reg_base);
+
+	/* Map IRQ */
+	port->irq = irq_of_parse_and_map(node, 0);
+	err = devm_request_irq(dev, port->irq, xilinx_pcie_intr_handler,
+			       IRQF_SHARED, "xilinx-pcie", port);
+	if (err) {
+		dev_err(dev, "unable to request irq %d\n", port->irq);
+		return err;
+	}
+
+	/* Get the bus range */
+	if (of_pci_parse_bus_range(node, &busn)) {
+		u32 val = pcie_read(port, XILINX_PCIE_REG_BIR);
+		u8 last;
+
+		last = (val & XILINX_PCIE_BIR_ECAM_SZ_MASK) >>
+			XILINX_PCIE_BIR_ECAM_SZ_SHIFT;
+
+		busn = (struct resource) {
+			.name	= node->name,
+			.start	= 0,
+			.end	= last,
+			.flags	= IORESOURCE_BUS,
+		};
+	}
+
+	return 0;
+}
+
+/**
+ * xilinx_pcie_probe - Probe function
+ * @pdev: Platform device pointer
+ *
+ * Return: '0' on success and error value on failure
+ */
+static int xilinx_pcie_probe(struct platform_device *pdev)
+{
+	struct xilinx_pcie_port *port;
+	struct hw_pci hw;
+	struct device *dev = &pdev->dev;
+	int err;
+
+	if (!dev->of_node)
+		return -ENODEV;
+
+	port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
+	if (!port)
+		return -ENOMEM;
+
+	port->dev = dev;
+
+	/* Parse the device tree */
+	err = xilinx_pcie_parse_dt(port);
+	if (err) {
+		dev_err(dev, "Parsing DT failed\n");
+		return err;
+	}
+
+	/* Initialize the hardware */
+	xilinx_pcie_init_port(port);
+
+	/* Setup IRQ Domain */
+	err = xilinx_pcie_init_irq_domain(port);
+	if (err) {
+		dev_err(dev, "Failed creating IRQ Dommain\n");
+		return err;
+	}
+
+	/* Initialize hw_pci structure */
+	memset(&hw, 0, sizeof(hw));
+	hw = (struct hw_pci) {
+		.nr_controllers	= 1,
+		.private_data	= (void **)&port,
+		.setup		= xilinx_pcie_setup,
+		.map_irq	= of_irq_parse_and_map_pci,
+		.add_bus	= xilinx_pcie_add_bus,
+		.scan		= xilinx_pcie_scan_bus,
+		.ops		= &xilinx_pcie_ops,
+	};
+
+	/* Register the device */
+	pci_common_init_dev(dev, &hw);
+
+	platform_set_drvdata(pdev, port);
+
+	return 0;
+}
+
+/**
+ * xilinx_pcie_remove - Remove function
+ * @pdev: Platform device pointer
+ *
+ * Return: '0' always
+ */
+static int xilinx_pcie_remove(struct platform_device *pdev)
+{
+	struct xilinx_pcie_port *port = platform_get_drvdata(pdev);
+
+	xilinx_pcie_free_irq_domain(port);
+
+	return 0;
+}
+
+static struct of_device_id xilinx_pcie_of_match[] = {
+	{ .compatible = "xlnx,axi-pcie-host-1.00.a" ,},
+	{}
+};
+
+static struct platform_driver xilinx_pcie_driver = {
+	.driver = {
+		.name = "xilinx-pcie",
+		.owner = THIS_MODULE,
+		.of_match_table = xilinx_pcie_of_match,
+		.suppress_bind_attrs = true,
+	},
+	.probe = xilinx_pcie_probe,
+	.remove = xilinx_pcie_remove,
+};
+module_platform_driver(xilinx_pcie_driver);
+
+MODULE_AUTHOR("Xilinx Inc");
+MODULE_DESCRIPTION("Xilinx AXI PCIe driver");
+MODULE_LICENSE("GPLv2");