@@ -194,6 +194,13 @@ void dw_pcie_msi_init(struct pcie_port *pp)
dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_HI, 4, 0);
}
+void dw_pcie_msi_cfg_restore(struct pcie_port *pp)
+{
+ dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_LO, 4,
+ virt_to_phys((void *)pp->msi_data));
+ dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_HI, 4, 0);
+}
+
static int find_valid_pos0(struct pcie_port *pp, int msgvec, int pos, int *pos0)
{
int flag = 1;
@@ -570,9 +577,6 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0);
- /* program correct class for RC */
- dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI);
-
dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val);
val |= PORT_LOGIC_SPEED_CHANGE;
dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val);
@@ -917,6 +921,11 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
val = memlimit | membase;
dw_pcie_writel_rc(pp, val, PCI_MEMORY_BASE);
+ /* program correct class for RC */
+ dw_pcie_readl_rc(pp, PCI_CLASS_REVISION, &val);
+ val |= PCI_CLASS_BRIDGE_PCI << 16;
+ dw_pcie_writel_rc(pp, val, PCI_CLASS_REVISION);
+
/* setup command register */
dw_pcie_readl_rc(pp, PCI_COMMAND, &val);
val &= 0xffff0000;
@@ -83,6 +83,7 @@ int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val);
int dw_pcie_cfg_write(void __iomem *addr, int where, int size, u32 val);
irqreturn_t dw_handle_msi_irq(struct pcie_port *pp);
void dw_pcie_msi_init(struct pcie_port *pp);
+void dw_pcie_msi_cfg_restore(struct pcie_port *pp);
int dw_pcie_link_up(struct pcie_port *pp);
void dw_pcie_setup_rc(struct pcie_port *pp);
int dw_pcie_host_init(struct pcie_port *pp);
- move "program correct class for RC" from dw_pcie_host_init() to dw_pcie_setup_rc(). since this is RC setup, it's better to contained in dw_pcie_setup_rc function. Then, RC can be re-setup really by dw_pcie_setup_rc(). - add one re-store msi data function. Because that pcie controller maybe powered off during system suspend, and the msi data configuration would be lost. this functions can be used to restore the msi data during the resume callback. Signed-off-by: Richard Zhu <r65037@freescale.com> --- drivers/pci/host/pcie-designware.c | 15 ++++++++++++--- drivers/pci/host/pcie-designware.h | 1 + 2 files changed, 13 insertions(+), 3 deletions(-)