diff mbox

[v8,4/9] PCI: imx6: Wait the clocks to stabilize after ref_en

Message ID 1413782724-30795-5-git-send-email-richard.zhu@freescale.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Richard Zhu Oct. 20, 2014, 5:25 a.m. UTC 
From: Richard Zhu <r65037@freescale.com>

For boards without a reset gpio we skip the delay between enabling
the pcie_ref_clk and touching the RC registers for configuration.
System would be hangs when the clocks are not yet settled in the DW
PCIe core. So we need to make sure that there is always an
appropriate delay between those two actions.

Signed-off-by: Richard Zhu <richard.zhu@freescale.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
---
 drivers/pci/host/pci-imx6.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)
diff mbox

Patch

diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
index 233fe8a..eac96fb 100644
--- a/drivers/pci/host/pci-imx6.c
+++ b/drivers/pci/host/pci-imx6.c
@@ -275,15 +275,22 @@  static int imx6_pcie_deassert_core_reset(struct pcie_port *pp)
 		goto err_pcie;
 	}
 
-	/* allow the clocks to stabilize */
-	usleep_range(200, 500);
-
 	/* power up core phy and enable ref clock */
 	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
 			IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
+	/*
+	 * the async reset input need ref clock to sync internally,
+	 * when the ref clock comes after reset, internal synced
+	 * reset time is too short , cannot meet the requirement.
+	 * add one ~10us delay here.
+	 */
+	udelay(10);
 	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
 			IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
 
+	/* allow the clocks to stabilize */
+	usleep_range(200, 500);
+
 	/* Some boards don't have PCIe reset GPIO. */
 	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
 		gpio_set_value(imx6_pcie->reset_gpio, 0);