@@ -798,45 +798,47 @@ static int EISA_ELCR(unsigned int irq)
static int irq_polarity(int idx)
{
int bus = mp_irqs[idx].srcbus;
- int polarity;
/*
* Determine IRQ line polarity (high active or low active):
*/
- switch (mp_irqs[idx].irqflag & 3)
- {
- case 0: /* conforms, ie. bus-type dependent polarity */
- if (test_bit(bus, mp_bus_not_pci))
- polarity = default_ISA_polarity(idx);
- else
- polarity = default_PCI_polarity(idx);
- break;
- case 1: /* high active */
- {
- polarity = IOAPIC_POL_HIGH;
- break;
- }
- case 2: /* reserved */
- {
- pr_warn("broken BIOS!!\n");
- polarity = IOAPIC_POL_LOW;
- break;
- }
- case 3: /* low active */
- {
- polarity = IOAPIC_POL_LOW;
- break;
- }
- default: /* invalid */
- {
- pr_warn("broken BIOS!!\n");
- polarity = IOAPIC_POL_LOW;
- break;
- }
+ switch (mp_irqs[idx].irqflag & 0x03) {
+ case 0:
+ /* conforms to spec, ie. bus-type dependent polarity */
+ if (test_bit(bus, mp_bus_not_pci))
+ return default_ISA_polarity(idx);
+ else
+ return default_PCI_polarity(idx);
+ case 1:
+ return IOAPIC_POL_HIGH;
+ case 2:
+ pr_warn("IOAPIC: Invalid polarity: 2, defaulting to low\n");
+ case 3:
+ default: /* Pointless default required due to do gcc stupidity */
+ return IOAPIC_POL_LOW;
}
- return polarity;
}
+#ifdef CONFIG_EISA
+static int eisa_irq_trigger(int idx, int bus, int trigger)
+{
+ switch (mp_bus_id_to_type[bus]) {
+ case MP_BUS_PCI:
+ case MP_BUS_ISA:
+ return trigger;
+ case MP_BUS_EISA:
+ return default_EISA_trigger(idx);
+ }
+ pr_warn("IOAPIC: Invalid srcbus: %d defaulting to level\n", bus);
+ return IOAPIC_LEVEL;
+}
+#else
+static inline int eisa_irq_trigger(int idx, int bus, int trigger)
+{
+ return trigger;
+}
+#endif
+
static int irq_trigger(int idx)
{
int bus = mp_irqs[idx].srcbus;
@@ -845,63 +847,23 @@ static int irq_trigger(int idx)
/*
* Determine IRQ trigger mode (edge or level sensitive):
*/
- switch ((mp_irqs[idx].irqflag>>2) & 3)
- {
- case 0: /* conforms, ie. bus-type dependent */
- if (test_bit(bus, mp_bus_not_pci))
- trigger = default_ISA_trigger(idx);
- else
- trigger = default_PCI_trigger(idx);
-#ifdef CONFIG_EISA
- switch (mp_bus_id_to_type[bus]) {
- case MP_BUS_ISA: /* ISA pin */
- {
- /* set before the switch */
- break;
- }
- case MP_BUS_EISA: /* EISA pin */
- {
- trigger = default_EISA_trigger(idx);
- break;
- }
- case MP_BUS_PCI: /* PCI pin */
- {
- /* set before the switch */
- break;
- }
- default:
- {
- pr_warn("broken BIOS!!\n");
- trigger = IOAPIC_LEVEL;
- break;
- }
- }
-#endif
- break;
- case 1: /* edge */
- {
- trigger = IOAPIC_EDGE;
- break;
- }
- case 2: /* reserved */
- {
- pr_warn("broken BIOS!!\n");
- trigger = IOAPIC_LEVEL;
- break;
- }
- case 3: /* level */
- {
- trigger = IOAPIC_LEVEL;
- break;
- }
- default: /* invalid */
- {
- pr_warn("broken BIOS!!\n");
- trigger = IOAPIC_EDGE;
- break;
- }
+ switch ((mp_irqs[idx].irqflag >> 2) & 0x03) {
+ case 0:
+ /* conforms to spec, ie. bus-type dependent trigger mode */
+ if (test_bit(bus, mp_bus_not_pci))
+ trigger = default_ISA_trigger(idx);
+ else
+ trigger = default_PCI_trigger(idx);
+ /* Take EISA into account */
+ return eisa_irq_trigger(idx, bus, trigger);
+ case 1:
+ return IOAPIC_EDGE;
+ case 2:
+ pr_warn("IOAPIC: Invalid trigger mode 2 defaulting to level\n");
+ case 3:
+ default: /* Pointless default required due to do gcc stupidity */
+ return IOAPIC_LEVEL;
}
- return trigger;
}
void ioapic_set_alloc_attr(struct irq_alloc_info *info, int node,