diff mbox

[1/1] pci-imx6: add speed change timeout message

Message ID 1433543864-7252-1-git-send-email-troy.kisky@boundarydevices.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Troy Kisky June 5, 2015, 10:37 p.m. UTC
Currently, the timeout is never detected as count
has a value of -1 if a timeout happens, but the code is checking
for 0. Also, this patch removes the unneeded final wait
if a timeout occurs.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
---
 drivers/pci/host/pci-imx6.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

Comments

Marek Vasut June 6, 2015, 12:03 a.m. UTC | #1
On Saturday, June 06, 2015 at 12:37:44 AM, Troy Kisky wrote:
> Currently, the timeout is never detected as count
> has a value of -1 if a timeout happens, but the code is checking
> for 0. Also, this patch removes the unneeded final wait
> if a timeout occurs.
> 
> Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

Acked-by: Marek Vasut <marex@denx.de>

Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
index fdb9536..51be92c 100644
--- a/drivers/pci/host/pci-imx6.c
+++ b/drivers/pci/host/pci-imx6.c
@@ -398,20 +398,22 @@  static int imx6_pcie_start_link(struct pcie_port *pp)
 	writel(tmp, pp->dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL);
 
 	count = 200;
-	while (count--) {
+	while (1) {
 		tmp = readl(pp->dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL);
 		/* Test if the speed change finished. */
-		if (!(tmp & PORT_LOGIC_SPEED_CHANGE))
+		if (!(tmp & PORT_LOGIC_SPEED_CHANGE)) {
+			/* Make sure link training is finished as well! */
+			ret = imx6_pcie_wait_for_link(pp);
+			break;
+		}
+		if (count-- == 0) {
+			dev_err(pp->dev, "Speed change timeout\n");
+			ret = -EINVAL;
 			break;
+		}
 		usleep_range(100, 1000);
 	}
 
-	/* Make sure link training is finished as well! */
-	if (count)
-		ret = imx6_pcie_wait_for_link(pp);
-	else
-		ret = -EINVAL;
-
 	if (ret) {
 		dev_err(pp->dev, "Failed to bring link up!\n");
 	} else {