diff mbox

[v1] ARM: keystone: dts: add PCI serdes driver bindings

Message ID 1445281080-14818-1-git-send-email-w-kwok2@ti.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

WingMan Kwok Oct. 19, 2015, 6:58 p.m. UTC
This patch adds the serdes phy driver dts bindings
for the keystone PCIe host driver.

v1:
	- addresses the following review comments
		1. https://lkml.org/lkml/2015/10/19/264
		2. https://lkml.org/lkml/2015/10/15/895

Signed-off-by: WingMan Kwok <w-kwok2@ti.com>
---
 arch/arm/boot/dts/k2e.dtsi      |   10 ++++++++++
 arch/arm/boot/dts/keystone.dtsi |   10 ++++++++++
 2 files changed, 20 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi
index 675fb8e..5f7cc0a 100644
--- a/arch/arm/boot/dts/k2e.dtsi
+++ b/arch/arm/boot/dts/k2e.dtsi
@@ -86,6 +86,15 @@ 
 			gpio,syscon-dev = <&devctrl 0x240>;
 		};
 
+		pcie1_phy: phy@2326000 {
+			#phy-cells = <0>;
+			compatible = "ti,keystone-serdes-pcie";
+			reg = <0x02326000 0x4000>;
+			link-rate-kbps = <5000000>;
+			num-lanes = <2>;
+			status = "disabled";
+		};
+
 		pcie1: pcie@21020000 {
 			compatible = "ti,keystone-pcie","snps,dw-pcie";
 			clocks = <&clkpcie1>;
@@ -99,6 +108,7 @@ 
 			status = "disabled";
 			device_type = "pci";
 			num-lanes = <2>;
+			phys = <&pcie1_phy>;
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index 72816d6..5c7c58a 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -275,6 +275,15 @@ 
 			ti,syscon-dev = <&devctrl 0x2a0>;
 		};
 
+		pcie0_phy: phy@2320000 {
+			#phy-cells = <0>;
+			compatible = "ti,keystone-serdes-pcie";
+			reg = <0x02320000 0x4000>;
+			link-rate-kbps = <5000000>;
+			num-lanes = <2>;
+			status = "disabled";
+		};
+
 		pcie0: pcie@21800000 {
 			compatible = "ti,keystone-pcie", "snps,dw-pcie";
 			clocks = <&clkpcie>;
@@ -288,6 +297,7 @@ 
 			status = "disabled";
 			device_type = "pci";
 			num-lanes = <2>;
+			phys = <&pcie0_phy>;
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;