diff mbox

[v2,1/3] dt-bindings: add DT binding for the Aardvark PCIe controller

Message ID 1465574056-8787-2-git-send-email-thomas.petazzoni@free-electrons.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Thomas Petazzoni June 10, 2016, 3:54 p.m. UTC
This commit adds the documentation for the Device Tree binding used to
describe the Aardvark PCIe controller, found on Marvell Armada 3700
ARM64 SoCs.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 .../devicetree/bindings/pci/aardvark-pci.txt       | 56 ++++++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/aardvark-pci.txt

Comments

Bjorn Helgaas June 22, 2016, 4:16 p.m. UTC | #1
On Fri, Jun 10, 2016 at 05:54:14PM +0200, Thomas Petazzoni wrote:
> This commit adds the documentation for the Device Tree binding used to
> describe the Aardvark PCIe controller, found on Marvell Armada 3700
> ARM64 SoCs.
> 
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> ---
>  .../devicetree/bindings/pci/aardvark-pci.txt       | 56 ++++++++++++++++++++++
>  1 file changed, 56 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/aardvark-pci.txt
> 
> diff --git a/Documentation/devicetree/bindings/pci/aardvark-pci.txt b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
> new file mode 100644
> index 0000000..683830d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
> @@ -0,0 +1,56 @@
> +Aardvark PCIe controller
> +
> +This PCIe controller is used on the Marvell Armada 3700 ARM64 SoC.
> +
> +The Device Tree node describing an Aardvark PCIe controller must
> +contain the following properties:
> +
> + - compatible: Should be "marvell,armada-3700-pcie"
> + - reg: range of registers for the PCIe controller
> + - interrupts: the interrupt line of the PCIe controller
> + - #address-cells: set to <3>
> + - #size-cells: set to <2>
> + - device_type: set to "pci"
> + - ranges: ranges for the PCI memory and I/O regions
> + - #interrupt-cells: set to <1>
> + - msi-controller: indicates that the PCIe controller can itself
> +   handled MSI interrupts

s/handled/handle/
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Thomas Petazzoni June 23, 2016, 2:10 p.m. UTC | #2
Hello,

On Wed, 22 Jun 2016 11:16:56 -0500, Bjorn Helgaas wrote:

> > + - compatible: Should be "marvell,armada-3700-pcie"
> > + - reg: range of registers for the PCIe controller
> > + - interrupts: the interrupt line of the PCIe controller
> > + - #address-cells: set to <3>
> > + - #size-cells: set to <2>
> > + - device_type: set to "pci"
> > + - ranges: ranges for the PCI memory and I/O regions
> > + - #interrupt-cells: set to <1>
> > + - msi-controller: indicates that the PCIe controller can itself
> > +   handled MSI interrupts  
> 
> s/handled/handle/

Thanks. Fixed for v3!

Thomas
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/pci/aardvark-pci.txt b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
new file mode 100644
index 0000000..683830d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
@@ -0,0 +1,56 @@ 
+Aardvark PCIe controller
+
+This PCIe controller is used on the Marvell Armada 3700 ARM64 SoC.
+
+The Device Tree node describing an Aardvark PCIe controller must
+contain the following properties:
+
+ - compatible: Should be "marvell,armada-3700-pcie"
+ - reg: range of registers for the PCIe controller
+ - interrupts: the interrupt line of the PCIe controller
+ - #address-cells: set to <3>
+ - #size-cells: set to <2>
+ - device_type: set to "pci"
+ - ranges: ranges for the PCI memory and I/O regions
+ - #interrupt-cells: set to <1>
+ - msi-controller: indicates that the PCIe controller can itself
+   handled MSI interrupts
+ - msi-parent: pointer to the MSI controller to be used
+ - interrupt-map-mask and interrupt-map: standard PCI properties to
+   define the mapping of the PCIe interface to interrupt numbers.
+ - bus-range: PCI bus numbers covered
+
+In addition, the Device Tree describing an Aardvark PCIe controller
+must include a sub-node that describes the legacy interrupt controller
+built into the PCIe controller. This sub-node must have the following
+properties:
+
+ - interrupt-controller
+ - #interrupt-cells: set to <1>
+
+Example:
+
+	pcie0: pcie@d0070000 {
+		compatible = "marvell,armada-3700-pcie";
+		device_type = "pci";
+		status = "disabled";
+		reg = <0 0xd0070000 0 0x20000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x00 0xff>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <1>;
+		msi-controller;
+		msi-parent = <&pcie0>;
+		ranges = <0x82000000 0 0xe8000000   0 0xe8000000 0 0x1000000 /* Port 0 MEM */
+			  0x81000000 0 0xe9000000   0 0xe9000000 0 0x10000>; /* Port 0 IO*/
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc 0>,
+				<0 0 0 2 &pcie_intc 1>,
+				<0 0 0 3 &pcie_intc 2>,
+				<0 0 0 4 &pcie_intc 3>;
+		pcie_intc: interrupt-controller {
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+	};