| Message ID | 1473105940-9761-2-git-send-email-tn@semihalf.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On Mon, Sep 5, 2016 at 10:05 PM, Tomasz Nowicki <tn@semihalf.com> wrote: > IORT shows representation of IO topology for ARM based systems. > It describes how various components are connected together on > parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. > http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf > > Initial support allows to detect IORT table presence and save its > root pointer obtained through acpi_get_table(). The pointer validity > depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap > is not set while using IORT nodes we would dereference unmapped pointers. > > For the aforementioned reason call iort_table_detect() from acpi_init() > which guarantees acpi_gbl_permanent_mmap to be set at that point. > > Add generic helpers which are helpful for scanning and retrieving > information from IORT table content. List of the most important helpers: > - iort_find_dev_node() finds IORT node for a given device > - iort_node_map_rid() maps device RID and returns IORT node which provides > final translation > > IORT support is placed under drivers/acpi/arm64/ new directory due to its > ARM64 specific nature. The code there is considered only for ARM64. > The long term plan is to keep all ARM64 specific tables support > in this place e.g. GTDT table. > > Signed-off-by: Tomasz Nowicki <tn@semihalf.com> > Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> > Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Some cosmetic stuff below. > --- > drivers/acpi/Kconfig | 4 + > drivers/acpi/Makefile | 2 + > drivers/acpi/arm64/Kconfig | 6 ++ > drivers/acpi/arm64/Makefile | 1 + > drivers/acpi/arm64/iort.c | 221 ++++++++++++++++++++++++++++++++++++++++++++ > drivers/acpi/bus.c | 2 + > include/linux/iort.h | 30 ++++++ > 7 files changed, 266 insertions(+) > create mode 100644 drivers/acpi/arm64/Kconfig > create mode 100644 drivers/acpi/arm64/Makefile > create mode 100644 drivers/acpi/arm64/iort.c > create mode 100644 include/linux/iort.h > > diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig > index 445ce28..d5c0614 100644 > --- a/drivers/acpi/Kconfig > +++ b/drivers/acpi/Kconfig > @@ -521,4 +521,8 @@ config ACPI_CONFIGFS > userspace. The configurable ACPI groups will be visible under > /config/acpi, assuming configfs is mounted under /config. > > +if ARM64 > +source "drivers/acpi/arm64/Kconfig" > +endif > + > endif # ACPI > diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile > index 5ae9d85..e5ada78 100644 > --- a/drivers/acpi/Makefile > +++ b/drivers/acpi/Makefile > @@ -105,3 +105,5 @@ obj-$(CONFIG_ACPI_CONFIGFS) += acpi_configfs.o > > video-objs += acpi_video.o video_detect.o > obj-y += dptf/ > + > +obj-$(CONFIG_ARM64) += arm64/ > diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig > new file mode 100644 > index 0000000..4616da4 > --- /dev/null > +++ b/drivers/acpi/arm64/Kconfig > @@ -0,0 +1,6 @@ > +# > +# ACPI Configuration for ARM64 > +# > + > +config ACPI_IORT > + bool > diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile > new file mode 100644 > index 0000000..72331f2 > --- /dev/null > +++ b/drivers/acpi/arm64/Makefile > @@ -0,0 +1 @@ > +obj-$(CONFIG_ACPI_IORT) += iort.o > diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c > new file mode 100644 > index 0000000..82d5e7d > --- /dev/null > +++ b/drivers/acpi/arm64/iort.c > @@ -0,0 +1,221 @@ > +/* > + * Copyright (C) 2016, Semihalf > + * Author: Tomasz Nowicki <tn@semihalf.com> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * This file implements early detection/parsing of I/O mapping > + * reported to OS through firmware via I/O Remapping Table (IORT) > + * IORT document number: ARM DEN 0049A > + */ > + > +#define pr_fmt(fmt) "ACPI: IORT: " fmt > + > +#include <linux/iort.h> Do we need a separate header file for this? > +#include <linux/kernel.h> > +#include <linux/pci.h> > + > +typedef acpi_status (*iort_find_node_callback) > + (struct acpi_iort_node *node, void *context); > + > +/* Root pointer to the mapped IORT table */ > +static struct acpi_table_header *iort_table; > + > +static struct acpi_iort_node * > +iort_scan_node(enum acpi_iort_node_type type, Please do not break function headers like this. Specifically, the return type and the name should be located in the same line. > + iort_find_node_callback callback, void *context) > +{ > + struct acpi_iort_node *iort_node, *iort_end; > + struct acpi_table_iort *iort; > + int i; > + > + if (!iort_table) > + return NULL; > + > + /* Get the first IORT node */ > + iort = (struct acpi_table_iort *)iort_table; > + iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort, > + iort->node_offset); > + iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, > + iort_table->length); > + > + for (i = 0; i < iort->node_count; i++) { > + if (WARN_TAINT(iort_node >= iort_end, TAINT_FIRMWARE_WORKAROUND, > + "IORT node pointer overflows, bad table!\n")) > + return NULL; > + > + if (iort_node->type == type) { > + if (ACPI_SUCCESS(callback(iort_node, context))) > + return iort_node; It's better to write this as if (iort_node->type == type && ACPI_SUCCESS(callback(iort_node, context)) return iort_node; > + } > + > + iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node, > + iort_node->length); > + } > + > + return NULL; > +} > + > +static acpi_status > +iort_match_node_callback(struct acpi_iort_node *node, void *context) > +{ > + struct device *dev = context; > + > + switch (node->type) { > + case ACPI_IORT_NODE_NAMED_COMPONENT: { > + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; > + struct acpi_device *adev = to_acpi_device_node(dev->fwnode); > + struct acpi_iort_named_component *ncomp; > + > + if (!adev) > + break; > + > + ncomp = (struct acpi_iort_named_component *)node->node_data; > + > + if (ACPI_FAILURE(acpi_get_name(adev->handle, > + ACPI_FULL_PATHNAME, &buffer))) { > + dev_warn(dev, "Can't get device full path name\n"); I'd switch the branches so that the one to be executed on success goes first. Also consider using acpi_status variables for things like this. status = acpi_get_name(adev->handle, ACPI_FULL_PATHNAME, &buffer); if (ACPI_SUCCESS(status)) { is much easier to follow than what you are doing here. > + } else { > + int match; > + > + match = !strcmp(ncomp->device_name, buffer.pointer); > + acpi_os_free(buffer.pointer); > + > + if (match) > + return AE_OK; > + } > + > + break; > + } > + case ACPI_IORT_NODE_PCI_ROOT_COMPLEX: { What is the brace for? > + struct acpi_iort_root_complex *pci_rc; > + struct pci_bus *bus; > + > + bus = to_pci_bus(dev); > + pci_rc = (struct acpi_iort_root_complex *)node->node_data; > + > + /* > + * It is assumed that PCI segment numbers maps one-to-one > + * with root complexes. Each segment number can represent only > + * one root complex. > + */ > + if (pci_rc->pci_segment_number == pci_domain_nr(bus)) > + return AE_OK; > + > + break; > + } > + } > + > + return AE_NOT_FOUND; > +} > + > +static int > +iort_id_map(struct acpi_iort_id_mapping *map, u8 type, u32 rid_in, u32 *rid_out) > +{ > + /* Single mapping does not care for input id */ > + if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) { > + if (type == ACPI_IORT_NODE_NAMED_COMPONENT || > + type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) { > + *rid_out = map->output_base; > + return 0; > + } > + > + pr_warn(FW_BUG "[map %p] SINGLE MAPPING flag not allowed for node type %d, skipping ID map\n", > + map, type); > + return -ENXIO; > + } > + > + if (rid_in < map->input_base || > + (rid_in >= map->input_base + map->id_count)) > + return -ENXIO; > + > + *rid_out = map->output_base + (rid_in - map->input_base); > + return 0; > +} > + > +static struct acpi_iort_node * > +iort_node_map_rid(struct acpi_iort_node *node, u32 rid_in, > + u32 *rid_out, u8 type) > +{ > + u32 rid = rid_in; > + > + /* Parse the ID mapping tree to find specified node type */ > + while (node) { > + struct acpi_iort_id_mapping *map; > + int i; > + > + if (node->type == type) { > + if (rid_out) > + *rid_out = rid; > + return node; > + } > + > + if (!node->mapping_offset || !node->mapping_count) > + goto fail_map; > + > + map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node, > + node->mapping_offset); > + > + /* Firmware bug! */ > + if (!map->output_reference) { > + pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n", > + node, node->type); > + goto fail_map; > + } > + > + /* Do the RID translation */ > + for (i = 0; i < node->mapping_count; i++, map++) { > + if (!iort_id_map(map, node->type, rid, &rid)) > + break; > + } > + > + if (i == node->mapping_count) > + goto fail_map; > + > + node = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, > + map->output_reference); > + } > + > +fail_map: > + /* Map input RID to output RID unchanged on mapping failure*/ > + if (rid_out) > + *rid_out = rid_in; > + > + return NULL; > +} > + > +static struct acpi_iort_node * > +iort_find_dev_node(struct device *dev) > +{ > + struct pci_bus *pbus; > + > + if (!dev_is_pci(dev)) > + return iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT, > + iort_match_node_callback, dev); > + > + /* Find a PCI root bus */ > + pbus = to_pci_dev(dev)->bus; > + while (!pci_is_root_bus(pbus)) > + pbus = pbus->parent; > + > + return iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX, > + iort_match_node_callback, &pbus->dev); > +} > + > +void __init acpi_iort_init(void) > +{ > + acpi_status status; > + > + status = acpi_get_table(ACPI_SIG_IORT, 0, &iort_table); > + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { > + const char *msg = acpi_format_exception(status); > + pr_err("Failed to get table, %s\n", msg); > + } > +} > diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c > index 85b7d07..7ddfbf2 100644 > --- a/drivers/acpi/bus.c > +++ b/drivers/acpi/bus.c > @@ -36,6 +36,7 @@ > #ifdef CONFIG_X86 > #include <asm/mpspec.h> > #endif > +#include <linux/iort.h> > #include <linux/pci.h> > #include <acpi/apei.h> > #include <linux/dmi.h> > @@ -1186,6 +1187,7 @@ static int __init acpi_init(void) > } > > pci_mmcfg_late_init(); > + acpi_iort_init(); > acpi_scan_init(); > acpi_ec_init(); > acpi_debugfs_init(); > diff --git a/include/linux/iort.h b/include/linux/iort.h > new file mode 100644 > index 0000000..f4d5d45 > --- /dev/null > +++ b/include/linux/iort.h If the new file header is necessary, it should be called acpi_iort.h IMO. > @@ -0,0 +1,30 @@ > +/* > + * Copyright (C) 2016, Semihalf > + * Author: Tomasz Nowicki <tn@semihalf.com> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * You should have received a copy of the GNU General Public License along with > + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple > + * Place - Suite 330, Boston, MA 02111-1307 USA. > + */ > + > +#ifndef __IORT_H__ > +#define __IORT_H__ > + > +#include <linux/acpi.h> > + > +#ifdef CONFIG_ACPI_IORT > +void acpi_iort_init(void); > +#else > +static inline void acpi_iort_init(void) { } > +#endif But I'm not really sure what would be wrong with putting this into acpi.h TBH. > + > +#endif /* __IORT_H__ */ > -- > 1.9.1 > Thanks, Rafael -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Rafael, On 05.09.2016 22:29, Rafael J. Wysocki wrote: > On Mon, Sep 5, 2016 at 10:05 PM, Tomasz Nowicki <tn@semihalf.com> wrote: >> IORT shows representation of IO topology for ARM based systems. >> It describes how various components are connected together on >> parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. >> http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf >> >> Initial support allows to detect IORT table presence and save its >> root pointer obtained through acpi_get_table(). The pointer validity >> depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap >> is not set while using IORT nodes we would dereference unmapped pointers. >> >> For the aforementioned reason call iort_table_detect() from acpi_init() >> which guarantees acpi_gbl_permanent_mmap to be set at that point. >> >> Add generic helpers which are helpful for scanning and retrieving >> information from IORT table content. List of the most important helpers: >> - iort_find_dev_node() finds IORT node for a given device >> - iort_node_map_rid() maps device RID and returns IORT node which provides >> final translation >> >> IORT support is placed under drivers/acpi/arm64/ new directory due to its >> ARM64 specific nature. The code there is considered only for ARM64. >> The long term plan is to keep all ARM64 specific tables support >> in this place e.g. GTDT table. >> >> Signed-off-by: Tomasz Nowicki <tn@semihalf.com> >> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> >> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > > Some cosmetic stuff below. > [...] >> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c >> new file mode 100644 >> index 0000000..82d5e7d >> --- /dev/null >> +++ b/drivers/acpi/arm64/iort.c >> @@ -0,0 +1,221 @@ >> +/* >> + * Copyright (C) 2016, Semihalf >> + * Author: Tomasz Nowicki <tn@semihalf.com> >> + * >> + * This program is free software; you can redistribute it and/or modify it >> + * under the terms and conditions of the GNU General Public License, >> + * version 2, as published by the Free Software Foundation. >> + * >> + * This program is distributed in the hope it will be useful, but WITHOUT >> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or >> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for >> + * more details. >> + * >> + * This file implements early detection/parsing of I/O mapping >> + * reported to OS through firmware via I/O Remapping Table (IORT) >> + * IORT document number: ARM DEN 0049A >> + */ >> + >> +#define pr_fmt(fmt) "ACPI: IORT: " fmt >> + >> +#include <linux/iort.h> > > Do we need a separate header file for this? IMO yes. It's well isolated functionality and more will be added in patch 2 and IOMMU support by Lorenzo. Also, it's the same convention as for DMAR support. > >> +#include <linux/kernel.h> >> +#include <linux/pci.h> >> + >> +typedef acpi_status (*iort_find_node_callback) >> + (struct acpi_iort_node *node, void *context); >> + >> +/* Root pointer to the mapped IORT table */ >> +static struct acpi_table_header *iort_table; >> + >> +static struct acpi_iort_node * >> +iort_scan_node(enum acpi_iort_node_type type, > > Please do not break function headers like this. Specifically, the > return type and the name should be located in the same line. OK > >> + iort_find_node_callback callback, void *context) >> +{ >> + struct acpi_iort_node *iort_node, *iort_end; >> + struct acpi_table_iort *iort; >> + int i; >> + >> + if (!iort_table) >> + return NULL; >> + >> + /* Get the first IORT node */ >> + iort = (struct acpi_table_iort *)iort_table; >> + iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort, >> + iort->node_offset); >> + iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, >> + iort_table->length); >> + >> + for (i = 0; i < iort->node_count; i++) { >> + if (WARN_TAINT(iort_node >= iort_end, TAINT_FIRMWARE_WORKAROUND, >> + "IORT node pointer overflows, bad table!\n")) >> + return NULL; >> + >> + if (iort_node->type == type) { >> + if (ACPI_SUCCESS(callback(iort_node, context))) >> + return iort_node; > > It's better to write this as > > if (iort_node->type == type && ACPI_SUCCESS(callback(iort_node, context)) > return iort_node; OK > >> + } >> + >> + iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node, >> + iort_node->length); >> + } >> + >> + return NULL; >> +} >> + >> +static acpi_status >> +iort_match_node_callback(struct acpi_iort_node *node, void *context) >> +{ >> + struct device *dev = context; >> + >> + switch (node->type) { >> + case ACPI_IORT_NODE_NAMED_COMPONENT: { >> + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; >> + struct acpi_device *adev = to_acpi_device_node(dev->fwnode); >> + struct acpi_iort_named_component *ncomp; >> + >> + if (!adev) >> + break; >> + >> + ncomp = (struct acpi_iort_named_component *)node->node_data; >> + >> + if (ACPI_FAILURE(acpi_get_name(adev->handle, >> + ACPI_FULL_PATHNAME, &buffer))) { >> + dev_warn(dev, "Can't get device full path name\n"); > > I'd switch the branches so that the one to be executed on success goes first. > > Also consider using acpi_status variables for things like this. > > status = acpi_get_name(adev->handle, ACPI_FULL_PATHNAME, &buffer); > if (ACPI_SUCCESS(status)) { > > is much easier to follow than what you are doing here. Agree, actually I rewrite this function as follow: static acpi_status iort_match_node_callback(struct acpi_iort_node *node, void *context) { struct device *dev = context; acpi_status status = AE_NOT_FOUND; switch (node->type) { case ACPI_IORT_NODE_NAMED_COMPONENT: { struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL }; struct acpi_device *adev = to_acpi_device_node(dev->fwnode); struct acpi_iort_named_component *ncomp; if (!adev) break; status = acpi_get_name(adev->handle, ACPI_FULL_PATHNAME, &buf); if (ACPI_FAILURE(status)) { dev_warn(dev, "Can't get device full path name\n"); break; } ncomp = (struct acpi_iort_named_component *)node->node_data; if (!strcmp(ncomp->device_name, buf.pointer)) status = AE_OK; acpi_os_free(buf.pointer); break; } case ACPI_IORT_NODE_PCI_ROOT_COMPLEX: { struct acpi_iort_root_complex *pci_rc; struct pci_bus *bus; bus = to_pci_bus(dev); pci_rc = (struct acpi_iort_root_complex *)node->node_data; /* * It is assumed that PCI segment numbers maps one-to-one * with root complexes. Each segment number can represent only * one root complex. */ if (pci_rc->pci_segment_number == pci_domain_nr(bus)) status = AE_OK; break; } } return status; } > >> + } else { >> + int match; >> + >> + match = !strcmp(ncomp->device_name, buffer.pointer); >> + acpi_os_free(buffer.pointer); >> + >> + if (match) >> + return AE_OK; >> + } >> + >> + break; >> + } >> + case ACPI_IORT_NODE_PCI_ROOT_COMPLEX: { > > What is the brace for? To create namespace for below local variables. The same for ACPI_IORT_NODE_NAMED_COMPONENT case. > >> + struct acpi_iort_root_complex *pci_rc; >> + struct pci_bus *bus; >> + >> + bus = to_pci_bus(dev); >> + pci_rc = (struct acpi_iort_root_complex *)node->node_data; >> + >> + /* >> + * It is assumed that PCI segment numbers maps one-to-one >> + * with root complexes. Each segment number can represent only >> + * one root complex. >> + */ >> + if (pci_rc->pci_segment_number == pci_domain_nr(bus)) >> + return AE_OK; >> + >> + break; >> + } >> + } >> + >> + return AE_NOT_FOUND; >> +} >> + [...] >> diff --git a/include/linux/iort.h b/include/linux/iort.h >> new file mode 100644 >> index 0000000..f4d5d45 >> --- /dev/null >> +++ b/include/linux/iort.h > > If the new file header is necessary, it should be called acpi_iort.h IMO. OK Thanks, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Sep 6, 2016 at 9:24 AM, Tomasz Nowicki <tn@semihalf.com> wrote: > Hi Rafael, > > > On 05.09.2016 22:29, Rafael J. Wysocki wrote: >> >> On Mon, Sep 5, 2016 at 10:05 PM, Tomasz Nowicki <tn@semihalf.com> wrote: >>> [cut] > static acpi_status iort_match_node_callback(struct acpi_iort_node *node, > void *context) > { > struct device *dev = context; > acpi_status status = AE_NOT_FOUND; > > switch (node->type) { > case ACPI_IORT_NODE_NAMED_COMPONENT: { > struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL }; > struct acpi_device *adev = to_acpi_device_node(dev->fwnode); > struct acpi_iort_named_component *ncomp; > > if (!adev) > break; > > status = acpi_get_name(adev->handle, ACPI_FULL_PATHNAME, > &buf); > if (ACPI_FAILURE(status)) { > dev_warn(dev, "Can't get device full path name\n"); > break; > } > > ncomp = (struct acpi_iort_named_component *)node->node_data; > if (!strcmp(ncomp->device_name, buf.pointer)) > status = AE_OK; > > acpi_os_free(buf.pointer); > break; > } > case ACPI_IORT_NODE_PCI_ROOT_COMPLEX: { > struct acpi_iort_root_complex *pci_rc; > struct pci_bus *bus; > > bus = to_pci_bus(dev); > pci_rc = (struct acpi_iort_root_complex *)node->node_data; > > /* > * It is assumed that PCI segment numbers maps one-to-one > * with root complexes. Each segment number can represent > only > * one root complex. > */ > if (pci_rc->pci_segment_number == pci_domain_nr(bus)) > status = AE_OK; > > break; > } > } > > return status; > } > >> >>> + } else { >>> + int match; >>> + >>> + match = !strcmp(ncomp->device_name, >>> buffer.pointer); >>> + acpi_os_free(buffer.pointer); >>> + >>> + if (match) >>> + return AE_OK; >>> + } >>> + >>> + break; >>> + } >>> + case ACPI_IORT_NODE_PCI_ROOT_COMPLEX: { >> >> >> What is the brace for? > > > To create namespace for below local variables. The same for > ACPI_IORT_NODE_NAMED_COMPONENT case. This looks weird, though. At least nest it in a usual way. And what would be wrong with using if () {} else if () {} instead? There are two cases only here anyway. Thanks, Rafael -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 445ce28..d5c0614 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -521,4 +521,8 @@ config ACPI_CONFIGFS userspace. The configurable ACPI groups will be visible under /config/acpi, assuming configfs is mounted under /config. +if ARM64 +source "drivers/acpi/arm64/Kconfig" +endif + endif # ACPI diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 5ae9d85..e5ada78 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -105,3 +105,5 @@ obj-$(CONFIG_ACPI_CONFIGFS) += acpi_configfs.o video-objs += acpi_video.o video_detect.o obj-y += dptf/ + +obj-$(CONFIG_ARM64) += arm64/ diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig new file mode 100644 index 0000000..4616da4 --- /dev/null +++ b/drivers/acpi/arm64/Kconfig @@ -0,0 +1,6 @@ +# +# ACPI Configuration for ARM64 +# + +config ACPI_IORT + bool diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile new file mode 100644 index 0000000..72331f2 --- /dev/null +++ b/drivers/acpi/arm64/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ACPI_IORT) += iort.o diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c new file mode 100644 index 0000000..82d5e7d --- /dev/null +++ b/drivers/acpi/arm64/iort.c @@ -0,0 +1,221 @@ +/* + * Copyright (C) 2016, Semihalf + * Author: Tomasz Nowicki <tn@semihalf.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * This file implements early detection/parsing of I/O mapping + * reported to OS through firmware via I/O Remapping Table (IORT) + * IORT document number: ARM DEN 0049A + */ + +#define pr_fmt(fmt) "ACPI: IORT: " fmt + +#include <linux/iort.h> +#include <linux/kernel.h> +#include <linux/pci.h> + +typedef acpi_status (*iort_find_node_callback) + (struct acpi_iort_node *node, void *context); + +/* Root pointer to the mapped IORT table */ +static struct acpi_table_header *iort_table; + +static struct acpi_iort_node * +iort_scan_node(enum acpi_iort_node_type type, + iort_find_node_callback callback, void *context) +{ + struct acpi_iort_node *iort_node, *iort_end; + struct acpi_table_iort *iort; + int i; + + if (!iort_table) + return NULL; + + /* Get the first IORT node */ + iort = (struct acpi_table_iort *)iort_table; + iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort, + iort->node_offset); + iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, + iort_table->length); + + for (i = 0; i < iort->node_count; i++) { + if (WARN_TAINT(iort_node >= iort_end, TAINT_FIRMWARE_WORKAROUND, + "IORT node pointer overflows, bad table!\n")) + return NULL; + + if (iort_node->type == type) { + if (ACPI_SUCCESS(callback(iort_node, context))) + return iort_node; + } + + iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node, + iort_node->length); + } + + return NULL; +} + +static acpi_status +iort_match_node_callback(struct acpi_iort_node *node, void *context) +{ + struct device *dev = context; + + switch (node->type) { + case ACPI_IORT_NODE_NAMED_COMPONENT: { + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_device *adev = to_acpi_device_node(dev->fwnode); + struct acpi_iort_named_component *ncomp; + + if (!adev) + break; + + ncomp = (struct acpi_iort_named_component *)node->node_data; + + if (ACPI_FAILURE(acpi_get_name(adev->handle, + ACPI_FULL_PATHNAME, &buffer))) { + dev_warn(dev, "Can't get device full path name\n"); + } else { + int match; + + match = !strcmp(ncomp->device_name, buffer.pointer); + acpi_os_free(buffer.pointer); + + if (match) + return AE_OK; + } + + break; + } + case ACPI_IORT_NODE_PCI_ROOT_COMPLEX: { + struct acpi_iort_root_complex *pci_rc; + struct pci_bus *bus; + + bus = to_pci_bus(dev); + pci_rc = (struct acpi_iort_root_complex *)node->node_data; + + /* + * It is assumed that PCI segment numbers maps one-to-one + * with root complexes. Each segment number can represent only + * one root complex. + */ + if (pci_rc->pci_segment_number == pci_domain_nr(bus)) + return AE_OK; + + break; + } + } + + return AE_NOT_FOUND; +} + +static int +iort_id_map(struct acpi_iort_id_mapping *map, u8 type, u32 rid_in, u32 *rid_out) +{ + /* Single mapping does not care for input id */ + if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) { + if (type == ACPI_IORT_NODE_NAMED_COMPONENT || + type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) { + *rid_out = map->output_base; + return 0; + } + + pr_warn(FW_BUG "[map %p] SINGLE MAPPING flag not allowed for node type %d, skipping ID map\n", + map, type); + return -ENXIO; + } + + if (rid_in < map->input_base || + (rid_in >= map->input_base + map->id_count)) + return -ENXIO; + + *rid_out = map->output_base + (rid_in - map->input_base); + return 0; +} + +static struct acpi_iort_node * +iort_node_map_rid(struct acpi_iort_node *node, u32 rid_in, + u32 *rid_out, u8 type) +{ + u32 rid = rid_in; + + /* Parse the ID mapping tree to find specified node type */ + while (node) { + struct acpi_iort_id_mapping *map; + int i; + + if (node->type == type) { + if (rid_out) + *rid_out = rid; + return node; + } + + if (!node->mapping_offset || !node->mapping_count) + goto fail_map; + + map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node, + node->mapping_offset); + + /* Firmware bug! */ + if (!map->output_reference) { + pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n", + node, node->type); + goto fail_map; + } + + /* Do the RID translation */ + for (i = 0; i < node->mapping_count; i++, map++) { + if (!iort_id_map(map, node->type, rid, &rid)) + break; + } + + if (i == node->mapping_count) + goto fail_map; + + node = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, + map->output_reference); + } + +fail_map: + /* Map input RID to output RID unchanged on mapping failure*/ + if (rid_out) + *rid_out = rid_in; + + return NULL; +} + +static struct acpi_iort_node * +iort_find_dev_node(struct device *dev) +{ + struct pci_bus *pbus; + + if (!dev_is_pci(dev)) + return iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT, + iort_match_node_callback, dev); + + /* Find a PCI root bus */ + pbus = to_pci_dev(dev)->bus; + while (!pci_is_root_bus(pbus)) + pbus = pbus->parent; + + return iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX, + iort_match_node_callback, &pbus->dev); +} + +void __init acpi_iort_init(void) +{ + acpi_status status; + + status = acpi_get_table(ACPI_SIG_IORT, 0, &iort_table); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + const char *msg = acpi_format_exception(status); + pr_err("Failed to get table, %s\n", msg); + } +} diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 85b7d07..7ddfbf2 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -36,6 +36,7 @@ #ifdef CONFIG_X86 #include <asm/mpspec.h> #endif +#include <linux/iort.h> #include <linux/pci.h> #include <acpi/apei.h> #include <linux/dmi.h> @@ -1186,6 +1187,7 @@ static int __init acpi_init(void) } pci_mmcfg_late_init(); + acpi_iort_init(); acpi_scan_init(); acpi_ec_init(); acpi_debugfs_init(); diff --git a/include/linux/iort.h b/include/linux/iort.h new file mode 100644 index 0000000..f4d5d45 --- /dev/null +++ b/include/linux/iort.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2016, Semihalf + * Author: Tomasz Nowicki <tn@semihalf.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. + */ + +#ifndef __IORT_H__ +#define __IORT_H__ + +#include <linux/acpi.h> + +#ifdef CONFIG_ACPI_IORT +void acpi_iort_init(void); +#else +static inline void acpi_iort_init(void) { } +#endif + +#endif /* __IORT_H__ */