diff mbox

[2/2] PCI: rockchip: Mark RC as common clock architecture

Message ID 1475657417-29163-2-git-send-email-shawn.lin@rock-chips.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Shawn Lin Oct. 5, 2016, 8:50 a.m. UTC 
The default value of common clock configuration is
zero indicating Rockchip's RC is using asynchronous
clock architecture but actually we are using common
clock. This will confuses some EP drivers if they
need some different settings referring to this value.
So let's fix it.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---

 drivers/pci/host/pcie-rockchip.c | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox

Patch

diff --git a/drivers/pci/host/pcie-rockchip.c b/drivers/pci/host/pcie-rockchip.c
index 7d16669..f204f8b 100644
--- a/drivers/pci/host/pcie-rockchip.c
+++ b/drivers/pci/host/pcie-rockchip.c
@@ -141,6 +141,7 @@ 
 #define   PCIE_RC_CONFIG_DCR_CPLS_SHIFT		26
 #define PCIE_RC_CONFIG_LCS		(PCIE_RC_CONFIG_BASE + 0xd0)
 #define   PCIE_RC_CONFIG_LCS_RETRAIN_LINK	BIT(5)
+#define   PCIE_RC_CONFIG_LCS_CCC		BIT(6)
 #define   PCIE_RC_CONFIG_LCS_LBMIE		BIT(10)
 #define   PCIE_RC_CONFIG_LCS_LABIE		BIT(11)
 #define   PCIE_RC_CONFIG_LCS_LBMS		BIT(30)
@@ -536,6 +537,11 @@  static int rockchip_pcie_init_port(struct rockchip_pcie *rockchip)
 
 	rockchip_pcie_set_power_limit(rockchip);
 
+	/* Set RC's clock architecture as common clock */
+	status = rockchip_pcie_read(rockchip, PCIE_RC_CONFIG_LCS);
+	status |= PCIE_RC_CONFIG_LCS_CCC;
+	rockchip_pcie_write(rockchip, status, PCIE_RC_CONFIG_LCS);
+
 	/* Enable Gen1 training */
 	rockchip_pcie_write(rockchip, PCIE_CLIENT_LINK_TRAIN_ENABLE,
 			    PCIE_CLIENT_CONFIG);