Message ID | 1514709094-4110-1-git-send-email-ilya@compulab.co.il (mailing list archive) |
---|---|
State | New, archived |
Delegated to: | Bjorn Helgaas |
Headers | show |
Hi Ilya, + Rob and dt list On Sun, Dec 31, 2017 at 6:31 AM, Ilya Ledvich <ilya@compulab.co.il> wrote: > i.MX7D variant of the IP can use either Crystal Oscillator input > or internal clock input as a Reference Clock input for PCIe PHY. > Add support for an optional property 'pcie-phy-refclk-internal'. > If present then an internal clock input is used as PCIe PHY > reference clock source. By default an external oscillator input > is still used. > > Verified on Compulab SBC-iMX7 Single Board Computer. > > Signed-off-by: Ilya Ledvich <ilya@compulab.co.il> > --- > Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt | 5 +++++ > drivers/pci/dwc/pci-imx6.c | 8 +++++++- > 2 files changed, 12 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > index 7b1e48b..581bc09 100644 > --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > @@ -50,6 +50,11 @@ Additional required properties for imx7d-pcie: > - "pciephy" > - "apps" > > +Additional optional properties for imx7d-pcie: > +- pcie-phy-refclk-internal: If present then an internal PLL input is used as > + PCIe PHY reference clock source. By default an external oscillator input > + is used. Should this contain the vendor prefix, like fsl,pcie-phy-refclk-internal ?
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt index 7b1e48b..581bc09 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt @@ -50,6 +50,11 @@ Additional required properties for imx7d-pcie: - "pciephy" - "apps" +Additional optional properties for imx7d-pcie: +- pcie-phy-refclk-internal: If present then an internal PLL input is used as + PCIe PHY reference clock source. By default an external oscillator input + is used. + Example: pcie@0x01000000 { diff --git a/drivers/pci/dwc/pci-imx6.c b/drivers/pci/dwc/pci-imx6.c index b734835..a616192 100644 --- a/drivers/pci/dwc/pci-imx6.c +++ b/drivers/pci/dwc/pci-imx6.c @@ -61,6 +61,7 @@ struct imx6_pcie { u32 tx_swing_low; int link_gen; struct regulator *vpcie; + bool pciephy_refclk_sel; }; /* Parameters for the waiting for PCIe PHY PLL to lock on i.MX7 */ @@ -474,7 +475,9 @@ static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie) switch (imx6_pcie->variant) { case IMX7D: regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, - IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0); + IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, + imx6_pcie->pciephy_refclk_sel ? + IMX7D_GPR12_PCIE_PHY_REFCLK_SEL : 0); break; case IMX6SX: regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, @@ -840,6 +843,9 @@ static int imx6_pcie_probe(struct platform_device *pdev) imx6_pcie->vpcie = NULL; } + imx6_pcie->pciephy_refclk_sel = + of_property_read_bool(node, "pcie-phy-refclk-internal"); + platform_set_drvdata(pdev, imx6_pcie); ret = imx6_add_pcie_port(imx6_pcie, pdev);
i.MX7D variant of the IP can use either Crystal Oscillator input or internal clock input as a Reference Clock input for PCIe PHY. Add support for an optional property 'pcie-phy-refclk-internal'. If present then an internal clock input is used as PCIe PHY reference clock source. By default an external oscillator input is still used. Verified on Compulab SBC-iMX7 Single Board Computer. Signed-off-by: Ilya Ledvich <ilya@compulab.co.il> --- Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt | 5 +++++ drivers/pci/dwc/pci-imx6.c | 8 +++++++- 2 files changed, 12 insertions(+), 1 deletion(-)