diff mbox

[v6,1/5] bnx2x: Report PCIe link properties with pcie_print_link_status()

Message ID 152537761536.62474.4071016337645118753.stgit@bhelgaas-glaptop.roam.corp.google.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Bjorn Helgaas May 3, 2018, 8 p.m. UTC
From: Bjorn Helgaas <bhelgaas@google.com>

Previously the driver used pcie_get_minimum_link() to warn when the NIC
is in a slot that can't supply as much bandwidth as the NIC could use.

pcie_get_minimum_link() can be misleading because it finds the slowest link
and the narrowest link (which may be different links) without considering
the total bandwidth of each link.  For a path with a 16 GT/s x1 link and a
2.5 GT/s x16 link, it returns 2.5 GT/s x1, which corresponds to 250 MB/s of
bandwidth, not the true available bandwidth of about 1969 MB/s for a
16 GT/s x1 link.

Use pcie_print_link_status() to report PCIe link speed and possible
limitations instead of implementing this in the driver itself.  This finds
the slowest link in the path to the device by computing the total bandwidth
of each link and compares that with the capabilities of the device.

The dmesg change is:

  - %s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM
  + %s (%c%d) PCI-E found at mem %lx, IRQ %d, node addr %pM
  + %u.%03u Gb/s available PCIe bandwidth (%s x%d link)

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c |   23 ++++++----------------
 1 file changed, 6 insertions(+), 17 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index c766ae23bc74..5b1ed240bf18 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -13922,8 +13922,6 @@  static int bnx2x_init_one(struct pci_dev *pdev,
 {
 	struct net_device *dev = NULL;
 	struct bnx2x *bp;
-	enum pcie_link_width pcie_width;
-	enum pci_bus_speed pcie_speed;
 	int rc, max_non_def_sbs;
 	int rx_count, tx_count, rss_count, doorbell_size;
 	int max_cos_est;
@@ -14091,21 +14089,12 @@  static int bnx2x_init_one(struct pci_dev *pdev,
 		dev_addr_add(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN);
 		rtnl_unlock();
 	}
-	if (pcie_get_minimum_link(bp->pdev, &pcie_speed, &pcie_width) ||
-	    pcie_speed == PCI_SPEED_UNKNOWN ||
-	    pcie_width == PCIE_LNK_WIDTH_UNKNOWN)
-		BNX2X_DEV_INFO("Failed to determine PCI Express Bandwidth\n");
-	else
-		BNX2X_DEV_INFO(
-		       "%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n",
-		       board_info[ent->driver_data].name,
-		       (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
-		       pcie_width,
-		       pcie_speed == PCIE_SPEED_2_5GT ? "2.5GHz" :
-		       pcie_speed == PCIE_SPEED_5_0GT ? "5.0GHz" :
-		       pcie_speed == PCIE_SPEED_8_0GT ? "8.0GHz" :
-		       "Unknown",
-		       dev->base_addr, bp->pdev->irq, dev->dev_addr);
+	BNX2X_DEV_INFO(
+	       "%s (%c%d) PCI-E found at mem %lx, IRQ %d, node addr %pM\n",
+	       board_info[ent->driver_data].name,
+	       (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
+	       dev->base_addr, bp->pdev->irq, dev->dev_addr);
+	pcie_print_link_status(bp->pdev);
 
 	bnx2x_register_phc(bp);