new file mode 100644
@@ -0,0 +1,66 @@
+* Xilinx Versal CPM DMA Root Port Bridge DT description
+
+Required properties:
+- #address-cells: Address representation for root ports, set to <3>
+- #size-cells: Size representation for root ports, set to <2>
+- #interrupt-cells: specifies the number of cells needed to encode an
+ interrupt source. The value must be 1.
+- compatible: Should contain "xlnx,versal-cpm-host-1.00"
+- reg: Should contain configuration space (includes bridge registers) and
+ CPM system level control and status registers, and length
+- reg-names: Must include the following entries:
+ "cfg": configuration space region and bridge registers
+ "cpm_slcr": CPM system level control and status registers
+- interrupts: Should contain AXI PCIe interrupt
+- interrupt-map-mask,
+ interrupt-map: standard PCI properties to define the mapping of the
+ PCI interface to interrupt numbers.
+- ranges: ranges for the PCI memory regions (I/O space region is not
+ supported by hardware)
+ Please refer to the standard PCI bus binding document for a more
+ detailed explanation
+- msi-map: Maps a Requester ID to an MSI controller and associated MSI
+ sideband data
+- interrupt-names: Must include the following entries:
+ "misc": interrupt asserted when legacy or error interrupt is received
+
+Interrupt controller child node
++++++++++++++++++++++++++++++++
+Required properties:
+- interrupt-controller: identifies the node as an interrupt controller
+- #address-cells: specifies the number of cells needed to encode an
+ address. The value must be 0.
+- #interrupt-cells: specifies the number of cells needed to encode an
+ interrupt source. The value must be 1.
+
+
+Refer to the following binding document for more detailed description on
+the use of 'msi-map':
+ Documentation/devicetree/bindings/pci/pci-msi.txt
+
+Example:
+ pci@fca10000 {
+ #address-cells = <3>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ compatible = "xlnx,versal-cpm-host-1.00";
+ interrupt-map = <0 0 0 1 &pcie_intc_0 1>,
+ <0 0 0 2 &pcie_intc_0 2>,
+ <0 0 0 3 &pcie_intc_0 3>,
+ <0 0 0 4 &pcie_intc_0 4>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-parent = <&gic>;
+ interrupt-names = "misc";
+ interrupts = <0 72 4>;
+ ranges = <0x02000000 0x00000000 0xE0000000 0x0 0xE0000000 0x00000000 0x10000000>,
+ <0x43000000 0x00000080 0x00000000 0x00000080 0x00000000 0x00000000 0x80000000>;
+ msi-map = <0x0 &its_gic 0x0 0x10000>;
+ reg = <0x6 0x00000000 0x0 0x1000000>,
+ <0x0 0xFCA10000 0x0 0x1000>;
+ reg-names = "cfg", "cpm_slcr";
+ pcie_intc_0: pci-interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller ;
+ };
+ };
Add device tree binding documentation for Versal CPM Root Port driver. Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> --- .../devicetree/bindings/pci/xilinx-versal-cpm.txt | 66 ++++++++++++++++++++++ 1 file changed, 66 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/xilinx-versal-cpm.txt