| Message ID | 1586262717-23566-1-git-send-email-yangyicong@hisilicon.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
| Series | [RFC] PCI: Use pci_pcie_find_root_port() to get root port | expand |
+ linux-wireless Yicong Yang <yangyicong@hisilicon.com> writes: > Previously we use pcie_find_root_port() to get root port from a pcie > device, use pci_find_pcie_root_port() to get root port from a pci > device, which increase the complexity. > > Unify the two functions and use pci_pcie_find_root_port() to get root > port from both pci device and pcie device. Then there is no need to > distinguish the type of the device. > > Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> > --- > drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 2 +- > drivers/pci/pci-acpi.c | 4 ++-- > drivers/pci/pci.c | 24 ------------------------ > drivers/pci/pcie/aer_inject.c | 2 +- > drivers/pci/probe.c | 2 +- > drivers/pci/quirks.c | 2 +- > drivers/thunderbolt/switch.c | 4 ++-- > include/linux/pci.h | 14 +++++++------- > 8 files changed, 15 insertions(+), 39 deletions(-) > > diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c > index 38d8fe2..556cb8c 100644 > --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c > +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c > @@ -158,7 +158,7 @@ void iwl_trans_pcie_dump_regs(struct iwl_trans *trans) > > /* Print root port AER registers */ > pos = 0; > - pdev = pcie_find_root_port(pdev); > + pdev = pci_pcie_find_root_port(pdev); > if (pdev) > pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR); > if (pos) { For the wireless change: Acked-by: Kalle Valo <kvalo@codeaurora.org>
On Tue, Apr 07, 2020 at 08:31:57PM +0800, Yicong Yang wrote: > Previously we use pcie_find_root_port() to get root port from a pcie > device, use pci_find_pcie_root_port() to get root port from a pci > device, which increase the complexity. > > Unify the two functions and use pci_pcie_find_root_port() to get root > port from both pci device and pcie device. Then there is no need to > distinguish the type of the device. > > Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> > --- > drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 2 +- > drivers/pci/pci-acpi.c | 4 ++-- > drivers/pci/pci.c | 24 ------------------------ > drivers/pci/pcie/aer_inject.c | 2 +- > drivers/pci/probe.c | 2 +- > drivers/pci/quirks.c | 2 +- > drivers/thunderbolt/switch.c | 4 ++-- > include/linux/pci.h | 14 +++++++------- > 8 files changed, 15 insertions(+), 39 deletions(-) > > diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c > index 38d8fe2..556cb8c 100644 > --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c > +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c > @@ -158,7 +158,7 @@ void iwl_trans_pcie_dump_regs(struct iwl_trans *trans) > > /* Print root port AER registers */ > pos = 0; > - pdev = pcie_find_root_port(pdev); > + pdev = pci_pcie_find_root_port(pdev); > if (pdev) > pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR); > if (pos) { > diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c > index 0c02d50..9316533 100644 > --- a/drivers/pci/pci-acpi.c > +++ b/drivers/pci/pci-acpi.c > @@ -246,7 +246,7 @@ static acpi_status decode_type1_hpx_record(union acpi_object *record, > > static bool pcie_root_rcb_set(struct pci_dev *dev) > { > - struct pci_dev *rp = pcie_find_root_port(dev); > + struct pci_dev *rp = pci_pcie_find_root_port(dev); > u16 lnkctl; > > if (!rp) > @@ -948,7 +948,7 @@ static bool acpi_pci_bridge_d3(struct pci_dev *dev) > * Look for a special _DSD property for the root port and if it > * is set we know the hierarchy behind it supports D3 just fine. > */ > - root = pci_find_pcie_root_port(dev); > + root = pci_pcie_find_root_port(dev); > if (!root) > return false; > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > index d828ca8..fc5e7b6 100644 > --- a/drivers/pci/pci.c > +++ b/drivers/pci/pci.c > @@ -695,30 +695,6 @@ struct resource *pci_find_resource(struct pci_dev *dev, struct resource *res) > EXPORT_SYMBOL(pci_find_resource); > > /** > - * pci_find_pcie_root_port - return PCIe Root Port > - * @dev: PCI device to query > - * > - * Traverse up the parent chain and return the PCIe Root Port PCI Device > - * for a given PCI Device. > - */ > -struct pci_dev *pci_find_pcie_root_port(struct pci_dev *dev) > -{ > - struct pci_dev *bridge, *highest_pcie_bridge = dev; > - > - bridge = pci_upstream_bridge(dev); > - while (bridge && pci_is_pcie(bridge)) { > - highest_pcie_bridge = bridge; > - bridge = pci_upstream_bridge(bridge); > - } > - > - if (pci_pcie_type(highest_pcie_bridge) != PCI_EXP_TYPE_ROOT_PORT) > - return NULL; > - > - return highest_pcie_bridge; > -} > -EXPORT_SYMBOL(pci_find_pcie_root_port); > - > -/** > * pci_wait_for_pending - wait for @mask bit(s) to clear in status word @pos > * @dev: the PCI device to operate on > * @pos: config space offset of status word > diff --git a/drivers/pci/pcie/aer_inject.c b/drivers/pci/pcie/aer_inject.c > index 6988fe7..c3bfc1b5 100644 > --- a/drivers/pci/pcie/aer_inject.c > +++ b/drivers/pci/pcie/aer_inject.c > @@ -332,7 +332,7 @@ static int aer_inject(struct aer_error_inj *einj) > dev = pci_get_domain_bus_and_slot(einj->domain, einj->bus, devfn); > if (!dev) > return -ENODEV; > - rpdev = pcie_find_root_port(dev); > + rpdev = pci_pcie_find_root_port(dev); > if (!rpdev) { > pci_err(dev, "Root port not found\n"); > ret = -ENODEV; > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c > index 512cb43..50f7733 100644 > --- a/drivers/pci/probe.c > +++ b/drivers/pci/probe.c > @@ -2015,7 +2015,7 @@ static void pci_configure_relaxed_ordering(struct pci_dev *dev) > * For now, we only deal with Relaxed Ordering issues with Root > * Ports. Peer-to-Peer DMA is another can of worms. > */ > - root = pci_find_pcie_root_port(dev); > + root = pci_pcie_find_root_port(dev); > if (!root) > return; > > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c > index 29f473e..ac62675 100644 > --- a/drivers/pci/quirks.c > +++ b/drivers/pci/quirks.c > @@ -4253,7 +4253,7 @@ DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, 0x1a02, PCI_CLASS_NOT_DEFINED, > */ > static void quirk_disable_root_port_attributes(struct pci_dev *pdev) > { > - struct pci_dev *root_port = pci_find_pcie_root_port(pdev); > + struct pci_dev *root_port = pci_pcie_find_root_port(pdev); > > if (!root_port) { > pci_warn(pdev, "PCIe Completion erratum may cause device errors\n"); > diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c > index a2ce990..90844c1 100644 > --- a/drivers/thunderbolt/switch.c > +++ b/drivers/thunderbolt/switch.c > @@ -263,7 +263,7 @@ static void nvm_authenticate_start_dma_port(struct tb_switch *sw) > * itself. To be on the safe side keep the root port in D0 during > * the whole upgrade process. > */ > - root_port = pci_find_pcie_root_port(sw->tb->nhi->pdev); > + root_port = pci_pcie_find_root_port(sw->tb->nhi->pdev); > if (root_port) > pm_runtime_get_noresume(&root_port->dev); > } > @@ -272,7 +272,7 @@ static void nvm_authenticate_complete_dma_port(struct tb_switch *sw) > { > struct pci_dev *root_port; > > - root_port = pci_find_pcie_root_port(sw->tb->nhi->pdev); > + root_port = pci_pcie_find_root_port(sw->tb->nhi->pdev); > if (root_port) > pm_runtime_put(&root_port->dev); > } For thunderbolt change, Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Below is a minor comment that you may want to consider. > diff --git a/include/linux/pci.h b/include/linux/pci.h > index 3840a54..b341ca30 100644 > --- a/include/linux/pci.h > +++ b/include/linux/pci.h > @@ -1011,7 +1011,6 @@ void pci_bus_add_device(struct pci_dev *dev); > void pci_read_bridge_bases(struct pci_bus *child); > struct resource *pci_find_parent_resource(const struct pci_dev *dev, > struct resource *res); > -struct pci_dev *pci_find_pcie_root_port(struct pci_dev *dev); > u8 pci_swizzle_interrupt_pin(const struct pci_dev *dev, u8 pin); > int pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge); > u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp); > @@ -2124,15 +2123,16 @@ static inline int pci_pcie_type(const struct pci_dev *dev) > return (pcie_caps_reg(dev) & PCI_EXP_FLAGS_TYPE) >> 4; > } > > -static inline struct pci_dev *pcie_find_root_port(struct pci_dev *dev) > +/** > + * pci_pcie_find_root_port - Get the PCIe root port device > + * @dev: PCI device > + */ I think it may be good to add a bit more description here for example you can take the pci_find_pcie_root_port() kernel-doc and use it here. > +static inline struct pci_dev *pci_pcie_find_root_port(struct pci_dev *dev) > { > - while (1) { > - if (!pci_is_pcie(dev)) > - break; > + dev = pci_physfn(dev); > + while (dev) { > if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) > return dev; > - if (!dev->bus->self) > - break; > dev = dev->bus->self; > } > return NULL; > -- > 2.8.1
On 2020/4/17 17:23, Mika Westerberg wrote: > On Tue, Apr 07, 2020 at 08:31:57PM +0800, Yicong Yang wrote: >> Previously we use pcie_find_root_port() to get root port from a pcie >> device, use pci_find_pcie_root_port() to get root port from a pci >> device, which increase the complexity. >> >> Unify the two functions and use pci_pcie_find_root_port() to get root >> port from both pci device and pcie device. Then there is no need to >> distinguish the type of the device. >> >> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> >> --- >> drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 2 +- >> drivers/pci/pci-acpi.c | 4 ++-- >> drivers/pci/pci.c | 24 ------------------------ >> drivers/pci/pcie/aer_inject.c | 2 +- >> drivers/pci/probe.c | 2 +- >> drivers/pci/quirks.c | 2 +- >> drivers/thunderbolt/switch.c | 4 ++-- >> include/linux/pci.h | 14 +++++++------- >> 8 files changed, 15 insertions(+), 39 deletions(-) >> >> diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c >> index 38d8fe2..556cb8c 100644 >> --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c >> +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c >> @@ -158,7 +158,7 @@ void iwl_trans_pcie_dump_regs(struct iwl_trans *trans) >> >> /* Print root port AER registers */ >> pos = 0; >> - pdev = pcie_find_root_port(pdev); >> + pdev = pci_pcie_find_root_port(pdev); >> if (pdev) >> pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR); >> if (pos) { >> diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c >> index 0c02d50..9316533 100644 >> --- a/drivers/pci/pci-acpi.c >> +++ b/drivers/pci/pci-acpi.c >> @@ -246,7 +246,7 @@ static acpi_status decode_type1_hpx_record(union acpi_object *record, >> >> static bool pcie_root_rcb_set(struct pci_dev *dev) >> { >> - struct pci_dev *rp = pcie_find_root_port(dev); >> + struct pci_dev *rp = pci_pcie_find_root_port(dev); >> u16 lnkctl; >> >> if (!rp) >> @@ -948,7 +948,7 @@ static bool acpi_pci_bridge_d3(struct pci_dev *dev) >> * Look for a special _DSD property for the root port and if it >> * is set we know the hierarchy behind it supports D3 just fine. >> */ >> - root = pci_find_pcie_root_port(dev); >> + root = pci_pcie_find_root_port(dev); >> if (!root) >> return false; >> >> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c >> index d828ca8..fc5e7b6 100644 >> --- a/drivers/pci/pci.c >> +++ b/drivers/pci/pci.c >> @@ -695,30 +695,6 @@ struct resource *pci_find_resource(struct pci_dev *dev, struct resource *res) >> EXPORT_SYMBOL(pci_find_resource); >> >> /** >> - * pci_find_pcie_root_port - return PCIe Root Port >> - * @dev: PCI device to query >> - * >> - * Traverse up the parent chain and return the PCIe Root Port PCI Device >> - * for a given PCI Device. >> - */ >> -struct pci_dev *pci_find_pcie_root_port(struct pci_dev *dev) >> -{ >> - struct pci_dev *bridge, *highest_pcie_bridge = dev; >> - >> - bridge = pci_upstream_bridge(dev); >> - while (bridge && pci_is_pcie(bridge)) { >> - highest_pcie_bridge = bridge; >> - bridge = pci_upstream_bridge(bridge); >> - } >> - >> - if (pci_pcie_type(highest_pcie_bridge) != PCI_EXP_TYPE_ROOT_PORT) >> - return NULL; >> - >> - return highest_pcie_bridge; >> -} >> -EXPORT_SYMBOL(pci_find_pcie_root_port); >> - >> -/** >> * pci_wait_for_pending - wait for @mask bit(s) to clear in status word @pos >> * @dev: the PCI device to operate on >> * @pos: config space offset of status word >> diff --git a/drivers/pci/pcie/aer_inject.c b/drivers/pci/pcie/aer_inject.c >> index 6988fe7..c3bfc1b5 100644 >> --- a/drivers/pci/pcie/aer_inject.c >> +++ b/drivers/pci/pcie/aer_inject.c >> @@ -332,7 +332,7 @@ static int aer_inject(struct aer_error_inj *einj) >> dev = pci_get_domain_bus_and_slot(einj->domain, einj->bus, devfn); >> if (!dev) >> return -ENODEV; >> - rpdev = pcie_find_root_port(dev); >> + rpdev = pci_pcie_find_root_port(dev); >> if (!rpdev) { >> pci_err(dev, "Root port not found\n"); >> ret = -ENODEV; >> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c >> index 512cb43..50f7733 100644 >> --- a/drivers/pci/probe.c >> +++ b/drivers/pci/probe.c >> @@ -2015,7 +2015,7 @@ static void pci_configure_relaxed_ordering(struct pci_dev *dev) >> * For now, we only deal with Relaxed Ordering issues with Root >> * Ports. Peer-to-Peer DMA is another can of worms. >> */ >> - root = pci_find_pcie_root_port(dev); >> + root = pci_pcie_find_root_port(dev); >> if (!root) >> return; >> >> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c >> index 29f473e..ac62675 100644 >> --- a/drivers/pci/quirks.c >> +++ b/drivers/pci/quirks.c >> @@ -4253,7 +4253,7 @@ DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, 0x1a02, PCI_CLASS_NOT_DEFINED, >> */ >> static void quirk_disable_root_port_attributes(struct pci_dev *pdev) >> { >> - struct pci_dev *root_port = pci_find_pcie_root_port(pdev); >> + struct pci_dev *root_port = pci_pcie_find_root_port(pdev); >> >> if (!root_port) { >> pci_warn(pdev, "PCIe Completion erratum may cause device errors\n"); >> diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c >> index a2ce990..90844c1 100644 >> --- a/drivers/thunderbolt/switch.c >> +++ b/drivers/thunderbolt/switch.c >> @@ -263,7 +263,7 @@ static void nvm_authenticate_start_dma_port(struct tb_switch *sw) >> * itself. To be on the safe side keep the root port in D0 during >> * the whole upgrade process. >> */ >> - root_port = pci_find_pcie_root_port(sw->tb->nhi->pdev); >> + root_port = pci_pcie_find_root_port(sw->tb->nhi->pdev); >> if (root_port) >> pm_runtime_get_noresume(&root_port->dev); >> } >> @@ -272,7 +272,7 @@ static void nvm_authenticate_complete_dma_port(struct tb_switch *sw) >> { >> struct pci_dev *root_port; >> >> - root_port = pci_find_pcie_root_port(sw->tb->nhi->pdev); >> + root_port = pci_pcie_find_root_port(sw->tb->nhi->pdev); >> if (root_port) >> pm_runtime_put(&root_port->dev); >> } > For thunderbolt change, > > Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> > > Below is a minor comment that you may want to consider. > >> diff --git a/include/linux/pci.h b/include/linux/pci.h >> index 3840a54..b341ca30 100644 >> --- a/include/linux/pci.h >> +++ b/include/linux/pci.h >> @@ -1011,7 +1011,6 @@ void pci_bus_add_device(struct pci_dev *dev); >> void pci_read_bridge_bases(struct pci_bus *child); >> struct resource *pci_find_parent_resource(const struct pci_dev *dev, >> struct resource *res); >> -struct pci_dev *pci_find_pcie_root_port(struct pci_dev *dev); >> u8 pci_swizzle_interrupt_pin(const struct pci_dev *dev, u8 pin); >> int pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge); >> u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp); >> @@ -2124,15 +2123,16 @@ static inline int pci_pcie_type(const struct pci_dev *dev) >> return (pcie_caps_reg(dev) & PCI_EXP_FLAGS_TYPE) >> 4; >> } >> >> -static inline struct pci_dev *pcie_find_root_port(struct pci_dev *dev) >> +/** >> + * pci_pcie_find_root_port - Get the PCIe root port device >> + * @dev: PCI device >> + */ > I think it may be good to add a bit more description here for example you > can take the pci_find_pcie_root_port() kernel-doc and use it here. Sure. Thanks. Regards, Yicong > >> +static inline struct pci_dev *pci_pcie_find_root_port(struct pci_dev *dev) >> { >> - while (1) { >> - if (!pci_is_pcie(dev)) >> - break; >> + dev = pci_physfn(dev); >> + while (dev) { >> if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) >> return dev; >> - if (!dev->bus->self) >> - break; >> dev = dev->bus->self; >> } >> return NULL; >> -- >> 2.8.1 > . >
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c index 38d8fe2..556cb8c 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c @@ -158,7 +158,7 @@ void iwl_trans_pcie_dump_regs(struct iwl_trans *trans) /* Print root port AER registers */ pos = 0; - pdev = pcie_find_root_port(pdev); + pdev = pci_pcie_find_root_port(pdev); if (pdev) pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR); if (pos) { diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 0c02d50..9316533 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -246,7 +246,7 @@ static acpi_status decode_type1_hpx_record(union acpi_object *record, static bool pcie_root_rcb_set(struct pci_dev *dev) { - struct pci_dev *rp = pcie_find_root_port(dev); + struct pci_dev *rp = pci_pcie_find_root_port(dev); u16 lnkctl; if (!rp) @@ -948,7 +948,7 @@ static bool acpi_pci_bridge_d3(struct pci_dev *dev) * Look for a special _DSD property for the root port and if it * is set we know the hierarchy behind it supports D3 just fine. */ - root = pci_find_pcie_root_port(dev); + root = pci_pcie_find_root_port(dev); if (!root) return false; diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index d828ca8..fc5e7b6 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -695,30 +695,6 @@ struct resource *pci_find_resource(struct pci_dev *dev, struct resource *res) EXPORT_SYMBOL(pci_find_resource); /** - * pci_find_pcie_root_port - return PCIe Root Port - * @dev: PCI device to query - * - * Traverse up the parent chain and return the PCIe Root Port PCI Device - * for a given PCI Device. - */ -struct pci_dev *pci_find_pcie_root_port(struct pci_dev *dev) -{ - struct pci_dev *bridge, *highest_pcie_bridge = dev; - - bridge = pci_upstream_bridge(dev); - while (bridge && pci_is_pcie(bridge)) { - highest_pcie_bridge = bridge; - bridge = pci_upstream_bridge(bridge); - } - - if (pci_pcie_type(highest_pcie_bridge) != PCI_EXP_TYPE_ROOT_PORT) - return NULL; - - return highest_pcie_bridge; -} -EXPORT_SYMBOL(pci_find_pcie_root_port); - -/** * pci_wait_for_pending - wait for @mask bit(s) to clear in status word @pos * @dev: the PCI device to operate on * @pos: config space offset of status word diff --git a/drivers/pci/pcie/aer_inject.c b/drivers/pci/pcie/aer_inject.c index 6988fe7..c3bfc1b5 100644 --- a/drivers/pci/pcie/aer_inject.c +++ b/drivers/pci/pcie/aer_inject.c @@ -332,7 +332,7 @@ static int aer_inject(struct aer_error_inj *einj) dev = pci_get_domain_bus_and_slot(einj->domain, einj->bus, devfn); if (!dev) return -ENODEV; - rpdev = pcie_find_root_port(dev); + rpdev = pci_pcie_find_root_port(dev); if (!rpdev) { pci_err(dev, "Root port not found\n"); ret = -ENODEV; diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 512cb43..50f7733 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -2015,7 +2015,7 @@ static void pci_configure_relaxed_ordering(struct pci_dev *dev) * For now, we only deal with Relaxed Ordering issues with Root * Ports. Peer-to-Peer DMA is another can of worms. */ - root = pci_find_pcie_root_port(dev); + root = pci_pcie_find_root_port(dev); if (!root) return; diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 29f473e..ac62675 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -4253,7 +4253,7 @@ DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, 0x1a02, PCI_CLASS_NOT_DEFINED, */ static void quirk_disable_root_port_attributes(struct pci_dev *pdev) { - struct pci_dev *root_port = pci_find_pcie_root_port(pdev); + struct pci_dev *root_port = pci_pcie_find_root_port(pdev); if (!root_port) { pci_warn(pdev, "PCIe Completion erratum may cause device errors\n"); diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c index a2ce990..90844c1 100644 --- a/drivers/thunderbolt/switch.c +++ b/drivers/thunderbolt/switch.c @@ -263,7 +263,7 @@ static void nvm_authenticate_start_dma_port(struct tb_switch *sw) * itself. To be on the safe side keep the root port in D0 during * the whole upgrade process. */ - root_port = pci_find_pcie_root_port(sw->tb->nhi->pdev); + root_port = pci_pcie_find_root_port(sw->tb->nhi->pdev); if (root_port) pm_runtime_get_noresume(&root_port->dev); } @@ -272,7 +272,7 @@ static void nvm_authenticate_complete_dma_port(struct tb_switch *sw) { struct pci_dev *root_port; - root_port = pci_find_pcie_root_port(sw->tb->nhi->pdev); + root_port = pci_pcie_find_root_port(sw->tb->nhi->pdev); if (root_port) pm_runtime_put(&root_port->dev); } diff --git a/include/linux/pci.h b/include/linux/pci.h index 3840a54..b341ca30 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1011,7 +1011,6 @@ void pci_bus_add_device(struct pci_dev *dev); void pci_read_bridge_bases(struct pci_bus *child); struct resource *pci_find_parent_resource(const struct pci_dev *dev, struct resource *res); -struct pci_dev *pci_find_pcie_root_port(struct pci_dev *dev); u8 pci_swizzle_interrupt_pin(const struct pci_dev *dev, u8 pin); int pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge); u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp); @@ -2124,15 +2123,16 @@ static inline int pci_pcie_type(const struct pci_dev *dev) return (pcie_caps_reg(dev) & PCI_EXP_FLAGS_TYPE) >> 4; } -static inline struct pci_dev *pcie_find_root_port(struct pci_dev *dev) +/** + * pci_pcie_find_root_port - Get the PCIe root port device + * @dev: PCI device + */ +static inline struct pci_dev *pci_pcie_find_root_port(struct pci_dev *dev) { - while (1) { - if (!pci_is_pcie(dev)) - break; + dev = pci_physfn(dev); + while (dev) { if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) return dev; - if (!dev->bus->self) - break; dev = dev->bus->self; } return NULL;
Previously we use pcie_find_root_port() to get root port from a pcie device, use pci_find_pcie_root_port() to get root port from a pci device, which increase the complexity. Unify the two functions and use pci_pcie_find_root_port() to get root port from both pci device and pcie device. Then there is no need to distinguish the type of the device. Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> --- drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 2 +- drivers/pci/pci-acpi.c | 4 ++-- drivers/pci/pci.c | 24 ------------------------ drivers/pci/pcie/aer_inject.c | 2 +- drivers/pci/probe.c | 2 +- drivers/pci/quirks.c | 2 +- drivers/thunderbolt/switch.c | 4 ++-- include/linux/pci.h | 14 +++++++------- 8 files changed, 15 insertions(+), 39 deletions(-) -- 2.8.1