diff mbox series

[02/20] arm64: dts: renesas: r8a774e1: Add PCIe device nodes

Message ID 1594919915-5225-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive)
State Not Applicable, archived
Headers show
Series Add support for SATA/PCIe/USB2[3]/VIN/CSI on R8A774E1 | expand

Commit Message

Prabhakar July 16, 2020, 5:18 p.m. UTC
Add PCIe{0,1} device nodes for R8A774E1 SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 47 ++++++++++++++++++++++-
 1 file changed, 46 insertions(+), 1 deletion(-)

Comments

Wolfram Sang July 22, 2020, 8:58 a.m. UTC | #1
On Thu, Jul 16, 2020 at 06:18:17PM +0100, Lad Prabhakar wrote:
> Add PCIe{0,1} device nodes for R8A774E1 SoC.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>

Hmm, doesn't apply on top of 5.8-rc6 for me. Is there a branch to pull
for easier review?
Wolfram Sang July 22, 2020, 9 a.m. UTC | #2
On Wed, Jul 22, 2020 at 10:58:49AM +0200, Wolfram Sang wrote:
> On Thu, Jul 16, 2020 at 06:18:17PM +0100, Lad Prabhakar wrote:
> > Add PCIe{0,1} device nodes for R8A774E1 SoC.
> > 
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
> 
> Hmm, doesn't apply on top of 5.8-rc6 for me. Is there a branch to pull
> for easier review?

My fault, I missed the first series. Please note such dependencies in
the cover letter.
Lad, Prabhakar July 22, 2020, 9:03 a.m. UTC | #3
Hi Wolfram,

On Wed, Jul 22, 2020 at 10:00 AM Wolfram Sang <wsa@kernel.org> wrote:
>
> On Wed, Jul 22, 2020 at 10:58:49AM +0200, Wolfram Sang wrote:
> > On Thu, Jul 16, 2020 at 06:18:17PM +0100, Lad Prabhakar wrote:
> > > Add PCIe{0,1} device nodes for R8A774E1 SoC.
> > >
> > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > > Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
> >
> > Hmm, doesn't apply on top of 5.8-rc6 for me. Is there a branch to pull
> > for easier review?
>
> My fault, I missed the first series. Please note such dependencies in
> the cover letter.
>
I didn't mention as they were already applied to Geert's tree [1]

[1] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git/log/?h=renesas-arm-dt-for-v5.9

Cheers,
--Prabhakar
Geert Uytterhoeven Aug. 5, 2020, 11:08 a.m. UTC | #4
On Thu, Jul 16, 2020 at 7:18 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> Add PCIe{0,1} device nodes for R8A774E1 SoC.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v5.10.

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
index 001874af8cf2..5805541b7882 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -1517,12 +1517,57 @@ 
 		};
 
 		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a774e1",
+				     "renesas,pcie-rcar-gen3";
 			reg = <0 0xfe000000 0 0x80000>;
 			#address-cells = <3>;
 			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
 			status = "disabled";
+		};
 
-			/* placeholder */
+		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a774e1",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xee800000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
 		};
 
 		hdmi0: hdmi@fead0000 {