diff mbox series

[v3,2/2] PCI: sprd: Add support for Unisoc SoCs' PCIe controller

Message ID 1599644912-29245-3-git-send-email-wuht06@gmail.com (mailing list archive)
State Changes Requested, archived
Delegated to: Lorenzo Pieralisi
Headers show
Series PCI: Add new Unisoc PCIe driver | expand

Commit Message

Hongtao Wu Sept. 9, 2020, 9:48 a.m. UTC
From: Hongtao Wu <billows.wu@unisoc.com>

This series adds PCIe controller driver for Unisoc SoCs.
This controller is based on DesignWare PCIe IP.

Signed-off-by: Hongtao Wu <billows.wu@unisoc.com>
---
 drivers/pci/controller/dwc/Kconfig     |  13 ++
 drivers/pci/controller/dwc/Makefile    |   1 +
 drivers/pci/controller/dwc/pcie-sprd.c | 231 +++++++++++++++++++++++++++++++++
 3 files changed, 245 insertions(+)
 create mode 100644 drivers/pci/controller/dwc/pcie-sprd.c

--
2.7.4

Comments

Rob Herring Sept. 15, 2020, 5:31 p.m. UTC | #1
On Wed, Sep 09, 2020 at 05:48:32PM +0800, Hongtao Wu wrote:
> From: Hongtao Wu <billows.wu@unisoc.com>
> 
> This series adds PCIe controller driver for Unisoc SoCs.
> This controller is based on DesignWare PCIe IP.
> 
> Signed-off-by: Hongtao Wu <billows.wu@unisoc.com>
> ---
>  drivers/pci/controller/dwc/Kconfig     |  13 ++
>  drivers/pci/controller/dwc/Makefile    |   1 +
>  drivers/pci/controller/dwc/pcie-sprd.c | 231 +++++++++++++++++++++++++++++++++
>  3 files changed, 245 insertions(+)
>  create mode 100644 drivers/pci/controller/dwc/pcie-sprd.c
> 
> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> index 044a376..0553010 100644
> --- a/drivers/pci/controller/dwc/Kconfig
> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -311,4 +311,17 @@ config PCIE_AL
>  	  required only for DT-based platforms. ACPI platforms with the
>  	  Annapurna Labs PCIe controller don't need to enable this.
> 
> +
> +config PCIE_SPRD
> +	tristate "Unisoc PCIe controller - Host Mode"
> +	depends on ARCH_SPRD || COMPILE_TEST
> +	depends on PCI_MSI_IRQ_DOMAIN
> +	select PCIE_DW_HOST
> +	help
> +	  Unisoc PCIe controller uses the DesignWare core. It can be configured
> +	  as an Endpoint (EP) or a Root complex (RC). In order to enable host
> +	  mode (the controller works as RC), PCIE_SPRD must be selected.
> +	  Say Y or M here if you want to PCIe RC controller support on Unisoc
> +	  SoCs.
> +
>  endmenu
> diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
> index a751553..eb546e9 100644
> --- a/drivers/pci/controller/dwc/Makefile
> +++ b/drivers/pci/controller/dwc/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_PCI_MESON) += pci-meson.o
>  obj-$(CONFIG_PCIE_TEGRA194) += pcie-tegra194.o
>  obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
>  obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
> +obj-$(CONFIG_PCIE_SPRD) += pcie-sprd.o
> 
>  # The following drivers are for devices that use the generic ACPI
>  # pci_root.c driver but don't support standard ECAM config access.
> diff --git a/drivers/pci/controller/dwc/pcie-sprd.c b/drivers/pci/controller/dwc/pcie-sprd.c
> new file mode 100644
> index 0000000..cec4f34
> --- /dev/null
> +++ b/drivers/pci/controller/dwc/pcie-sprd.c
> @@ -0,0 +1,231 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * PCIe host controller driver for Unisoc SoCs
> + *
> + * Copyright (C) 2020 Unisoc, Inc.
> + *
> + * Author: Hongtao Wu <Billows.Wu@unisoc.com>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +#include <linux/regmap.h>
> +
> +#include "pcie-designware.h"
> +
> +#define NUM_OF_ARGS 5
> +
> +struct sprd_pcie {
> +	struct dw_pcie pci;
> +};
> +
> +static int sprd_pcie_syscon_setting(struct platform_device *pdev, char *env)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	int i, count, err;
> +	u32 type, delay, reg, mask, val, tmp_val;
> +	struct of_phandle_args out_args;
> +	struct regmap *iomap;
> +	struct device *dev = &pdev->dev;
> +
> +	if (!of_find_property(np, env, NULL)) {
> +		dev_info(dev, "There isn't property %s in dts\n", env);
> +		return 0;
> +	}
> +
> +	count = of_property_count_elems_of_size(np, env,
> +					(NUM_OF_ARGS + 1) * sizeof(u32));
> +	dev_info(dev, "Property (%s) reg count is %d :\n", env, count);
> +
> +	for (i = 0; i < count; i++) {
> +		err = of_parse_phandle_with_fixed_args(np, env, NUM_OF_ARGS,
> +						       i, &out_args);
> +		if (err < 0)
> +			return err;
> +
> +		type = out_args.args[0];
> +		delay = out_args.args[1];
> +		reg = out_args.args[2];
> +		mask = out_args.args[3];
> +		val = out_args.args[4];
> +
> +		iomap = syscon_node_to_regmap(out_args.np);
> +
> +		switch (type) {
> +		case 0:
> +			regmap_update_bits(iomap, reg, mask, val);
> +			break;
> +
> +		case 1:
> +			regmap_read(iomap, reg, &tmp_val);
> +			tmp_val &= (~mask);
> +			tmp_val |= (val & mask);
> +			regmap_write(iomap, reg, tmp_val);
> +			break;
> +		default:
> +			break;
> +		}
> +
> +		if (delay)
> +			usleep_range(delay, delay + 10);
> +
> +		regmap_read(iomap, reg, &tmp_val);
> +		dev_dbg(dev,
> +			"%2d:reg[0x%8x] mask[0x%8x] val[0x%8x] result[0x%8x]\n",
> +			i, reg, mask, val, tmp_val);
> +	}
> +
> +	return i;
> +}
> +
> +static int sprd_pcie_perst_assert(struct platform_device *pdev)
> +{
> +	return sprd_pcie_syscon_setting(pdev, "sprd,pcie-perst-assert");

Not documented. This should probably use the reset binding.

> +}
> +
> +static int sprd_pcie_perst_deassert(struct platform_device *pdev)
> +{
> +	return sprd_pcie_syscon_setting(pdev, "sprd,pcie-perst-deassert");
> +}
> +
> +static int sprd_pcie_power_on(struct platform_device *pdev)
> +{
> +	int ret;
> +	struct device *dev = &pdev->dev;
> +
> +	ret = sprd_pcie_syscon_setting(pdev, "sprd,pcie-poweron-syscons");
> +	if (ret < 0)
> +		dev_err(dev,
> +			"failed to set pcie poweroff syscons, return %d\n",
> +			ret);
> +
> +	sprd_pcie_perst_deassert(pdev);
> +
> +	return ret;
> +}
> +
> +static int sprd_pcie_power_off(struct platform_device *pdev)
> +{
> +	int ret;
> +	struct device *dev = &pdev->dev;
> +
> +	sprd_pcie_perst_assert(pdev);
> +
> +	ret = sprd_pcie_syscon_setting(pdev, "sprd,pcie-poweroff-syscons");
> +	if (ret < 0)
> +		dev_err(dev,
> +			"failed to set pcie poweroff syscons, return %d\n",
> +			ret);
> +
> +	return ret;
> +}
> +
> +static int sprd_pcie_host_init(struct pcie_port *pp)
> +{
> +	int ret;
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +
> +	dw_pcie_setup_rc(pp);
> +	dw_pcie_msi_init(pp);
> +
> +	ret = dw_pcie_wait_for_link(pci);
> +	if (ret)
> +		dev_err(pci->dev, "pcie ep may has not been powered on yet\n");
> +
> +	return ret;
> +}
> +
> +static const struct dw_pcie_host_ops sprd_pcie_host_ops = {
> +	.host_init = sprd_pcie_host_init,
> +};
> +
> +static int sprd_add_pcie_port(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct sprd_pcie *ctrl = platform_get_drvdata(pdev);
> +	struct dw_pcie *pci = &ctrl->pci;
> +	struct pcie_port *pp = &pci->pp;
> +
> +	pci->dbi_base = devm_platform_ioremap_resource_byname(pdev, "dbi");
> +	if (IS_ERR(pci->dbi_base)) {
> +		dev_err(dev, "failed to get rc dbi base\n");
> +		return PTR_ERR(pci->dbi_base);
> +	}
> +
> +	pp->ops = &sprd_pcie_host_ops;
> +
> +	if (IS_ENABLED(CONFIG_PCI_MSI)) {

I don't think this check is needed. The DW core won't setup the MSI if 
not enabled, so doesn't matter if msi_irq is initialized.

> +		pp->msi_irq = platform_get_irq_byname(pdev, "msi");
> +		if (pp->msi_irq < 0) {
> +			dev_err(dev, "failed to get msi, return %d\n",
> +				pp->msi_irq);

No need to print an error, the core does this.

> +			return pp->msi_irq;
> +		}
> +	}
> +
> +	return dw_pcie_host_init(pp);
> +}
> +
> +static int sprd_pcie_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct sprd_pcie *ctrl;
> +	struct dw_pcie *pci;
> +	int ret;
> +
> +	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
> +	if (!ctrl)
> +		return -ENOMEM;
> +
> +	pci = &ctrl->pci;
> +	pci->dev = dev;
> +
> +	platform_set_drvdata(pdev, ctrl);
> +
> +	ret = sprd_pcie_power_on(pdev);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to get pcie poweron syscons, return %d\n",
> +			ret);
> +		goto err_power_off;
> +	}
> +
> +	ret = sprd_add_pcie_port(pdev);
> +	if (ret) {
> +		dev_warn(dev, "failed to initialize RC controller\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +
> +err_power_off:
> +	sprd_pcie_power_off(pdev);
> +
> +	return ret;
> +}
> +
> +static const struct of_device_id sprd_pcie_of_match[] = {
> +	{
> +		.compatible = "sprd,pcie-rc",
> +	},
> +	{},
> +};
> +
> +static struct platform_driver sprd_pcie_driver = {
> +	.probe = sprd_pcie_probe,

You need a .remove hook.

> +	.driver = {
> +		.name = "sprd-pcie",
> +		.of_match_table = sprd_pcie_of_match,
> +	},
> +};
> +
> +module_platform_driver(sprd_pcie_driver);
> +
> +MODULE_DESCRIPTION("Unisoc PCIe host controller driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.7.4
>
Hongtao Wu Sept. 18, 2020, 2 a.m. UTC | #2
Hi Bob,
Thanks for the review.

On Wed, Sep 16, 2020 at 1:31 AM Rob Herring <robh@kernel.org> wrote:
>
> On Wed, Sep 09, 2020 at 05:48:32PM +0800, Hongtao Wu wrote:
> > From: Hongtao Wu <billows.wu@unisoc.com>
> >
> > This series adds PCIe controller driver for Unisoc SoCs.
> > This controller is based on DesignWare PCIe IP.
> >
> > Signed-off-by: Hongtao Wu <billows.wu@unisoc.com>
> > ---
> >  drivers/pci/controller/dwc/Kconfig     |  13 ++
> >  drivers/pci/controller/dwc/Makefile    |   1 +
> >  drivers/pci/controller/dwc/pcie-sprd.c | 231 +++++++++++++++++++++++++++++++++
> >  3 files changed, 245 insertions(+)
> >  create mode 100644 drivers/pci/controller/dwc/pcie-sprd.c
> >
> > diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> > index 044a376..0553010 100644
> > --- a/drivers/pci/controller/dwc/Kconfig
> > +++ b/drivers/pci/controller/dwc/Kconfig
> > @@ -311,4 +311,17 @@ config PCIE_AL
> >         required only for DT-based platforms. ACPI platforms with the
> >         Annapurna Labs PCIe controller don't need to enable this.
> >
> > +
> > +config PCIE_SPRD
> > +     tristate "Unisoc PCIe controller - Host Mode"
> > +     depends on ARCH_SPRD || COMPILE_TEST
> > +     depends on PCI_MSI_IRQ_DOMAIN
> > +     select PCIE_DW_HOST
> > +     help
> > +       Unisoc PCIe controller uses the DesignWare core. It can be configured
> > +       as an Endpoint (EP) or a Root complex (RC). In order to enable host
> > +       mode (the controller works as RC), PCIE_SPRD must be selected.
> > +       Say Y or M here if you want to PCIe RC controller support on Unisoc
> > +       SoCs.
> > +
> >  endmenu
> > diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
> > index a751553..eb546e9 100644
> > --- a/drivers/pci/controller/dwc/Makefile
> > +++ b/drivers/pci/controller/dwc/Makefile
> > @@ -20,6 +20,7 @@ obj-$(CONFIG_PCI_MESON) += pci-meson.o
> >  obj-$(CONFIG_PCIE_TEGRA194) += pcie-tegra194.o
> >  obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
> >  obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
> > +obj-$(CONFIG_PCIE_SPRD) += pcie-sprd.o
> >
> >  # The following drivers are for devices that use the generic ACPI
> >  # pci_root.c driver but don't support standard ECAM config access.
> > diff --git a/drivers/pci/controller/dwc/pcie-sprd.c b/drivers/pci/controller/dwc/pcie-sprd.c
> > new file mode 100644
> > index 0000000..cec4f34
> > --- /dev/null
> > +++ b/drivers/pci/controller/dwc/pcie-sprd.c
> > @@ -0,0 +1,231 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * PCIe host controller driver for Unisoc SoCs
> > + *
> > + * Copyright (C) 2020 Unisoc, Inc.
> > + *
> > + * Author: Hongtao Wu <Billows.Wu@unisoc.com>
> > + */
> > +
> > +#include <linux/delay.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/mfd/syscon.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/of_irq.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/property.h>
> > +#include <linux/regmap.h>
> > +
> > +#include "pcie-designware.h"
> > +
> > +#define NUM_OF_ARGS 5
> > +
> > +struct sprd_pcie {
> > +     struct dw_pcie pci;
> > +};
> > +
> > +static int sprd_pcie_syscon_setting(struct platform_device *pdev, char *env)
> > +{
> > +     struct device_node *np = pdev->dev.of_node;
> > +     int i, count, err;
> > +     u32 type, delay, reg, mask, val, tmp_val;
> > +     struct of_phandle_args out_args;
> > +     struct regmap *iomap;
> > +     struct device *dev = &pdev->dev;
> > +
> > +     if (!of_find_property(np, env, NULL)) {
> > +             dev_info(dev, "There isn't property %s in dts\n", env);
> > +             return 0;
> > +     }
> > +
> > +     count = of_property_count_elems_of_size(np, env,
> > +                                     (NUM_OF_ARGS + 1) * sizeof(u32));
> > +     dev_info(dev, "Property (%s) reg count is %d :\n", env, count);
> > +
> > +     for (i = 0; i < count; i++) {
> > +             err = of_parse_phandle_with_fixed_args(np, env, NUM_OF_ARGS,
> > +                                                    i, &out_args);
> > +             if (err < 0)
> > +                     return err;
> > +
> > +             type = out_args.args[0];
> > +             delay = out_args.args[1];
> > +             reg = out_args.args[2];
> > +             mask = out_args.args[3];
> > +             val = out_args.args[4];
> > +
> > +             iomap = syscon_node_to_regmap(out_args.np);
> > +
> > +             switch (type) {
> > +             case 0:
> > +                     regmap_update_bits(iomap, reg, mask, val);
> > +                     break;
> > +
> > +             case 1:
> > +                     regmap_read(iomap, reg, &tmp_val);
> > +                     tmp_val &= (~mask);
> > +                     tmp_val |= (val & mask);
> > +                     regmap_write(iomap, reg, tmp_val);
> > +                     break;
> > +             default:
> > +                     break;
> > +             }
> > +
> > +             if (delay)
> > +                     usleep_range(delay, delay + 10);
> > +
> > +             regmap_read(iomap, reg, &tmp_val);
> > +             dev_dbg(dev,
> > +                     "%2d:reg[0x%8x] mask[0x%8x] val[0x%8x] result[0x%8x]\n",
> > +                     i, reg, mask, val, tmp_val);
> > +     }
> > +
> > +     return i;
> > +}
> > +
> > +static int sprd_pcie_perst_assert(struct platform_device *pdev)
> > +{
> > +     return sprd_pcie_syscon_setting(pdev, "sprd,pcie-perst-assert");
>
> Not documented. This should probably use the reset binding.
>

Thanks! I'll Document it in the next version.

> > +}
> > +
> > +static int sprd_pcie_perst_deassert(struct platform_device *pdev)
> > +{
> > +     return sprd_pcie_syscon_setting(pdev, "sprd,pcie-perst-deassert");
> > +}
> > +
> > +static int sprd_pcie_power_on(struct platform_device *pdev)
> > +{
> > +     int ret;
> > +     struct device *dev = &pdev->dev;
> > +
> > +     ret = sprd_pcie_syscon_setting(pdev, "sprd,pcie-poweron-syscons");
> > +     if (ret < 0)
> > +             dev_err(dev,
> > +                     "failed to set pcie poweroff syscons, return %d\n",
> > +                     ret);
> > +
> > +     sprd_pcie_perst_deassert(pdev);
> > +
> > +     return ret;
> > +}
> > +
> > +static int sprd_pcie_power_off(struct platform_device *pdev)
> > +{
> > +     int ret;
> > +     struct device *dev = &pdev->dev;
> > +
> > +     sprd_pcie_perst_assert(pdev);
> > +
> > +     ret = sprd_pcie_syscon_setting(pdev, "sprd,pcie-poweroff-syscons");
> > +     if (ret < 0)
> > +             dev_err(dev,
> > +                     "failed to set pcie poweroff syscons, return %d\n",
> > +                     ret);
> > +
> > +     return ret;
> > +}
> > +
> > +static int sprd_pcie_host_init(struct pcie_port *pp)
> > +{
> > +     int ret;
> > +     struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > +
> > +     dw_pcie_setup_rc(pp);
> > +     dw_pcie_msi_init(pp);
> > +
> > +     ret = dw_pcie_wait_for_link(pci);
> > +     if (ret)
> > +             dev_err(pci->dev, "pcie ep may has not been powered on yet\n");
> > +
> > +     return ret;
> > +}
> > +
> > +static const struct dw_pcie_host_ops sprd_pcie_host_ops = {
> > +     .host_init = sprd_pcie_host_init,
> > +};
> > +
> > +static int sprd_add_pcie_port(struct platform_device *pdev)
> > +{
> > +     struct device *dev = &pdev->dev;
> > +     struct sprd_pcie *ctrl = platform_get_drvdata(pdev);
> > +     struct dw_pcie *pci = &ctrl->pci;
> > +     struct pcie_port *pp = &pci->pp;
> > +
> > +     pci->dbi_base = devm_platform_ioremap_resource_byname(pdev, "dbi");
> > +     if (IS_ERR(pci->dbi_base)) {
> > +             dev_err(dev, "failed to get rc dbi base\n");
> > +             return PTR_ERR(pci->dbi_base);
> > +     }
> > +
> > +     pp->ops = &sprd_pcie_host_ops;
> > +
> > +     if (IS_ENABLED(CONFIG_PCI_MSI)) {
>
> I don't think this check is needed. The DW core won't setup the MSI if
> not enabled, so doesn't matter if msi_irq is initialized.
>

Thanks!
I'll delete it in the next version.

> > +             pp->msi_irq = platform_get_irq_byname(pdev, "msi");
> > +             if (pp->msi_irq < 0) {
> > +                     dev_err(dev, "failed to get msi, return %d\n",
> > +                             pp->msi_irq);
>
> No need to print an error, the core does this.
>

Thanks!
I'll delete it in the next version.

> > +                     return pp->msi_irq;
> > +             }
> > +     }
> > +
> > +     return dw_pcie_host_init(pp);
> > +}
> > +
> > +static int sprd_pcie_probe(struct platform_device *pdev)
> > +{
> > +     struct device *dev = &pdev->dev;
> > +     struct sprd_pcie *ctrl;
> > +     struct dw_pcie *pci;
> > +     int ret;
> > +
> > +     ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
> > +     if (!ctrl)
> > +             return -ENOMEM;
> > +
> > +     pci = &ctrl->pci;
> > +     pci->dev = dev;
> > +
> > +     platform_set_drvdata(pdev, ctrl);
> > +
> > +     ret = sprd_pcie_power_on(pdev);
> > +     if (ret < 0) {
> > +             dev_err(dev, "failed to get pcie poweron syscons, return %d\n",
> > +                     ret);
> > +             goto err_power_off;
> > +     }
> > +
> > +     ret = sprd_add_pcie_port(pdev);
> > +     if (ret) {
> > +             dev_warn(dev, "failed to initialize RC controller\n");
> > +             return ret;
> > +     }
> > +
> > +     return 0;
> > +
> > +err_power_off:
> > +     sprd_pcie_power_off(pdev);
> > +
> > +     return ret;
> > +}
> > +
> > +static const struct of_device_id sprd_pcie_of_match[] = {
> > +     {
> > +             .compatible = "sprd,pcie-rc",
> > +     },
> > +     {},
> > +};
> > +
> > +static struct platform_driver sprd_pcie_driver = {
> > +     .probe = sprd_pcie_probe,
>
> You need a .remove hook.
>

Yes! I'll fix it.

> > +     .driver = {
> > +             .name = "sprd-pcie",
> > +             .of_match_table = sprd_pcie_of_match,
> > +     },
> > +};
> > +
> > +module_platform_driver(sprd_pcie_driver);
> > +
> > +MODULE_DESCRIPTION("Unisoc PCIe host controller driver");
> > +MODULE_LICENSE("GPL v2");
> > --
> > 2.7.4
> >
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 044a376..0553010 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -311,4 +311,17 @@  config PCIE_AL
 	  required only for DT-based platforms. ACPI platforms with the
 	  Annapurna Labs PCIe controller don't need to enable this.

+
+config PCIE_SPRD
+	tristate "Unisoc PCIe controller - Host Mode"
+	depends on ARCH_SPRD || COMPILE_TEST
+	depends on PCI_MSI_IRQ_DOMAIN
+	select PCIE_DW_HOST
+	help
+	  Unisoc PCIe controller uses the DesignWare core. It can be configured
+	  as an Endpoint (EP) or a Root complex (RC). In order to enable host
+	  mode (the controller works as RC), PCIE_SPRD must be selected.
+	  Say Y or M here if you want to PCIe RC controller support on Unisoc
+	  SoCs.
+
 endmenu
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index a751553..eb546e9 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -20,6 +20,7 @@  obj-$(CONFIG_PCI_MESON) += pci-meson.o
 obj-$(CONFIG_PCIE_TEGRA194) += pcie-tegra194.o
 obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
 obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
+obj-$(CONFIG_PCIE_SPRD) += pcie-sprd.o

 # The following drivers are for devices that use the generic ACPI
 # pci_root.c driver but don't support standard ECAM config access.
diff --git a/drivers/pci/controller/dwc/pcie-sprd.c b/drivers/pci/controller/dwc/pcie-sprd.c
new file mode 100644
index 0000000..cec4f34
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-sprd.c
@@ -0,0 +1,231 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe host controller driver for Unisoc SoCs
+ *
+ * Copyright (C) 2020 Unisoc, Inc.
+ *
+ * Author: Hongtao Wu <Billows.Wu@unisoc.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#include "pcie-designware.h"
+
+#define NUM_OF_ARGS 5
+
+struct sprd_pcie {
+	struct dw_pcie pci;
+};
+
+static int sprd_pcie_syscon_setting(struct platform_device *pdev, char *env)
+{
+	struct device_node *np = pdev->dev.of_node;
+	int i, count, err;
+	u32 type, delay, reg, mask, val, tmp_val;
+	struct of_phandle_args out_args;
+	struct regmap *iomap;
+	struct device *dev = &pdev->dev;
+
+	if (!of_find_property(np, env, NULL)) {
+		dev_info(dev, "There isn't property %s in dts\n", env);
+		return 0;
+	}
+
+	count = of_property_count_elems_of_size(np, env,
+					(NUM_OF_ARGS + 1) * sizeof(u32));
+	dev_info(dev, "Property (%s) reg count is %d :\n", env, count);
+
+	for (i = 0; i < count; i++) {
+		err = of_parse_phandle_with_fixed_args(np, env, NUM_OF_ARGS,
+						       i, &out_args);
+		if (err < 0)
+			return err;
+
+		type = out_args.args[0];
+		delay = out_args.args[1];
+		reg = out_args.args[2];
+		mask = out_args.args[3];
+		val = out_args.args[4];
+
+		iomap = syscon_node_to_regmap(out_args.np);
+
+		switch (type) {
+		case 0:
+			regmap_update_bits(iomap, reg, mask, val);
+			break;
+
+		case 1:
+			regmap_read(iomap, reg, &tmp_val);
+			tmp_val &= (~mask);
+			tmp_val |= (val & mask);
+			regmap_write(iomap, reg, tmp_val);
+			break;
+		default:
+			break;
+		}
+
+		if (delay)
+			usleep_range(delay, delay + 10);
+
+		regmap_read(iomap, reg, &tmp_val);
+		dev_dbg(dev,
+			"%2d:reg[0x%8x] mask[0x%8x] val[0x%8x] result[0x%8x]\n",
+			i, reg, mask, val, tmp_val);
+	}
+
+	return i;
+}
+
+static int sprd_pcie_perst_assert(struct platform_device *pdev)
+{
+	return sprd_pcie_syscon_setting(pdev, "sprd,pcie-perst-assert");
+}
+
+static int sprd_pcie_perst_deassert(struct platform_device *pdev)
+{
+	return sprd_pcie_syscon_setting(pdev, "sprd,pcie-perst-deassert");
+}
+
+static int sprd_pcie_power_on(struct platform_device *pdev)
+{
+	int ret;
+	struct device *dev = &pdev->dev;
+
+	ret = sprd_pcie_syscon_setting(pdev, "sprd,pcie-poweron-syscons");
+	if (ret < 0)
+		dev_err(dev,
+			"failed to set pcie poweroff syscons, return %d\n",
+			ret);
+
+	sprd_pcie_perst_deassert(pdev);
+
+	return ret;
+}
+
+static int sprd_pcie_power_off(struct platform_device *pdev)
+{
+	int ret;
+	struct device *dev = &pdev->dev;
+
+	sprd_pcie_perst_assert(pdev);
+
+	ret = sprd_pcie_syscon_setting(pdev, "sprd,pcie-poweroff-syscons");
+	if (ret < 0)
+		dev_err(dev,
+			"failed to set pcie poweroff syscons, return %d\n",
+			ret);
+
+	return ret;
+}
+
+static int sprd_pcie_host_init(struct pcie_port *pp)
+{
+	int ret;
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+
+	dw_pcie_setup_rc(pp);
+	dw_pcie_msi_init(pp);
+
+	ret = dw_pcie_wait_for_link(pci);
+	if (ret)
+		dev_err(pci->dev, "pcie ep may has not been powered on yet\n");
+
+	return ret;
+}
+
+static const struct dw_pcie_host_ops sprd_pcie_host_ops = {
+	.host_init = sprd_pcie_host_init,
+};
+
+static int sprd_add_pcie_port(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct sprd_pcie *ctrl = platform_get_drvdata(pdev);
+	struct dw_pcie *pci = &ctrl->pci;
+	struct pcie_port *pp = &pci->pp;
+
+	pci->dbi_base = devm_platform_ioremap_resource_byname(pdev, "dbi");
+	if (IS_ERR(pci->dbi_base)) {
+		dev_err(dev, "failed to get rc dbi base\n");
+		return PTR_ERR(pci->dbi_base);
+	}
+
+	pp->ops = &sprd_pcie_host_ops;
+
+	if (IS_ENABLED(CONFIG_PCI_MSI)) {
+		pp->msi_irq = platform_get_irq_byname(pdev, "msi");
+		if (pp->msi_irq < 0) {
+			dev_err(dev, "failed to get msi, return %d\n",
+				pp->msi_irq);
+			return pp->msi_irq;
+		}
+	}
+
+	return dw_pcie_host_init(pp);
+}
+
+static int sprd_pcie_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct sprd_pcie *ctrl;
+	struct dw_pcie *pci;
+	int ret;
+
+	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
+	if (!ctrl)
+		return -ENOMEM;
+
+	pci = &ctrl->pci;
+	pci->dev = dev;
+
+	platform_set_drvdata(pdev, ctrl);
+
+	ret = sprd_pcie_power_on(pdev);
+	if (ret < 0) {
+		dev_err(dev, "failed to get pcie poweron syscons, return %d\n",
+			ret);
+		goto err_power_off;
+	}
+
+	ret = sprd_add_pcie_port(pdev);
+	if (ret) {
+		dev_warn(dev, "failed to initialize RC controller\n");
+		return ret;
+	}
+
+	return 0;
+
+err_power_off:
+	sprd_pcie_power_off(pdev);
+
+	return ret;
+}
+
+static const struct of_device_id sprd_pcie_of_match[] = {
+	{
+		.compatible = "sprd,pcie-rc",
+	},
+	{},
+};
+
+static struct platform_driver sprd_pcie_driver = {
+	.probe = sprd_pcie_probe,
+	.driver = {
+		.name = "sprd-pcie",
+		.of_match_table = sprd_pcie_of_match,
+	},
+};
+
+module_platform_driver(sprd_pcie_driver);
+
+MODULE_DESCRIPTION("Unisoc PCIe host controller driver");
+MODULE_LICENSE("GPL v2");