diff mbox series

PCI: xilinx-nwl: Enable coherenct PCIe traffic using CCI

Message ID 1611223156-8787-1-git-send-email-bharat.kumar.gogada@xilinx.com (mailing list archive)
State Changes Requested
Headers show
Series PCI: xilinx-nwl: Enable coherenct PCIe traffic using CCI | expand

Commit Message

Bharat Kumar Gogada Jan. 21, 2021, 9:59 a.m. UTC
- Add support for routing PCIe traffic coherently when
 Cache Coherent Interconnect(CCI) is enabled in the system.

Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
---
 drivers/pci/controller/pcie-xilinx-nwl.c | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Bjorn Helgaas Jan. 21, 2021, 4:28 p.m. UTC | #1
[+cc Rob]

s/coherenct/coherent/ in subject
s/traffic/DMA/ (this applies specifically to DMA, not to MMIO)

On Thu, Jan 21, 2021 at 03:29:16PM +0530, Bharat Kumar Gogada wrote:
> - Add support for routing PCIe traffic coherently when
>  Cache Coherent Interconnect(CCI) is enabled in the system.

s/- Add/Add/
s/Interconnect(CCI)/Interconnect (CCI)/

Can you include a URL to a CCI spec?  I'm not familiar with it.  I
guess this is something upstream from the host bridge, i.e., between
the CPU and the host bridge, so it's outside the PCI domain?

I'd like to mention the DT "dma-coherent" property in the commit log
to help connect this with the knob that controls it.

The "dma-coherent" property is mentioned several places in
Documentation/devicetree/bindings/pci/ (but not anything obviously
related to xilinx-nwl).  Should it be moved to something like
Documentation/devicetree/bindings/pci/pci.txt to make it more generic?

> Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
> ---
>  drivers/pci/controller/pcie-xilinx-nwl.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c
> index 07e3666..08e06057 100644
> --- a/drivers/pci/controller/pcie-xilinx-nwl.c
> +++ b/drivers/pci/controller/pcie-xilinx-nwl.c
> @@ -26,6 +26,7 @@
>  
>  /* Bridge core config registers */
>  #define BRCFG_PCIE_RX0			0x00000000
> +#define BRCFG_PCIE_RX1			0x00000004
>  #define BRCFG_INTERRUPT			0x00000010
>  #define BRCFG_PCIE_RX_MSG_FILTER	0x00000020
>  
> @@ -128,6 +129,7 @@
>  #define NWL_ECAM_VALUE_DEFAULT		12
>  
>  #define CFG_DMA_REG_BAR			GENMASK(2, 0)
> +#define CFG_PCIE_CACHE			GENMASK(7, 0)
>  
>  #define INT_PCI_MSI_NR			(2 * 32)
>  
> @@ -675,6 +677,12 @@ static int nwl_pcie_bridge_init(struct nwl_pcie *pcie)
>  	nwl_bridge_writel(pcie, CFG_ENABLE_MSG_FILTER_MASK,
>  			  BRCFG_PCIE_RX_MSG_FILTER);
>  
> +	/* This routes the PCIe DMA traffic to go through CCI path */
> +	if (of_dma_is_coherent(dev->of_node)) {
> +		nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, BRCFG_PCIE_RX1) |
> +				  CFG_PCIE_CACHE, BRCFG_PCIE_RX1);
> +	}
> +
>  	err = nwl_wait_for_link(pcie);
>  	if (err)
>  		return err;
> -- 
> 2.7.4
>
Bharat Kumar Gogada Jan. 27, 2021, 5:03 a.m. UTC | #2
> [+cc Rob]
> 
> s/coherenct/coherent/ in subject
> s/traffic/DMA/ (this applies specifically to DMA, not to MMIO)
> 
> On Thu, Jan 21, 2021 at 03:29:16PM +0530, Bharat Kumar Gogada wrote:
> > - Add support for routing PCIe traffic coherently when  Cache Coherent
> > Interconnect(CCI) is enabled in the system.
> 
> s/- Add/Add/
> s/Interconnect(CCI)/Interconnect (CCI)/
> 
Thanks Bjorn for corrections.
Here is the CCI spec 
https://developer.arm.com/documentation/ddi0470/k/preface

> Can you include a URL to a CCI spec?  I'm not familiar with it.  I guess this is
> something upstream from the host bridge, i.e., between the CPU and the
> host bridge, so it's outside the PCI domain?
> 
> I'd like to mention the DT "dma-coherent" property in the commit log to
> help connect this with the knob that controls it.
Yes will add it. 
> 
> The "dma-coherent" property is mentioned several places in
> Documentation/devicetree/bindings/pci/ (but not anything obviously related
> to xilinx-nwl).  Should it be moved to something like
> Documentation/devicetree/bindings/pci/pci.txt to make it more generic?
> 
I will update this property in documentation as optional property.
Rob can confirm if this can be moved to generic. 
> > Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
> > ---
> >  drivers/pci/controller/pcie-xilinx-nwl.c | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> >
> > diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c
> > b/drivers/pci/controller/pcie-xilinx-nwl.c
> > index 07e3666..08e06057 100644
> > --- a/drivers/pci/controller/pcie-xilinx-nwl.c
> > +++ b/drivers/pci/controller/pcie-xilinx-nwl.c
> > @@ -26,6 +26,7 @@
> >
> >  /* Bridge core config registers */
> >  #define BRCFG_PCIE_RX0			0x00000000
> > +#define BRCFG_PCIE_RX1			0x00000004
> >  #define BRCFG_INTERRUPT			0x00000010
> >  #define BRCFG_PCIE_RX_MSG_FILTER	0x00000020
> >
> > @@ -128,6 +129,7 @@
> >  #define NWL_ECAM_VALUE_DEFAULT		12
> >
> >  #define CFG_DMA_REG_BAR			GENMASK(2, 0)
> > +#define CFG_PCIE_CACHE			GENMASK(7, 0)
> >
> >  #define INT_PCI_MSI_NR			(2 * 32)
> >
> > @@ -675,6 +677,12 @@ static int nwl_pcie_bridge_init(struct nwl_pcie
> *pcie)
> >  	nwl_bridge_writel(pcie, CFG_ENABLE_MSG_FILTER_MASK,
> >  			  BRCFG_PCIE_RX_MSG_FILTER);
> >
> > +	/* This routes the PCIe DMA traffic to go through CCI path */
> > +	if (of_dma_is_coherent(dev->of_node)) {
> > +		nwl_bridge_writel(pcie, nwl_bridge_readl(pcie,
> BRCFG_PCIE_RX1) |
> > +				  CFG_PCIE_CACHE, BRCFG_PCIE_RX1);
> > +	}
> > +
> >  	err = nwl_wait_for_link(pcie);
> >  	if (err)
> >  		return err;
> > --
> > 2.7.4
> >
Bjorn Helgaas Jan. 27, 2021, 3:23 p.m. UTC | #3
On Wed, Jan 27, 2021 at 05:03:12AM +0000, Bharat Kumar Gogada wrote:
> > On Thu, Jan 21, 2021 at 03:29:16PM +0530, Bharat Kumar Gogada wrote:

> Here is the CCI spec 
> https://developer.arm.com/documentation/ddi0470/k/preface

I'm sure it was obvious, but please include this in the commit log as
well.

> > Can you include a URL to a CCI spec?  I'm not familiar with it.  I
> > guess this is something upstream from the host bridge, i.e.,
> > between the CPU and the host bridge, so it's outside the PCI
> > domain?
Rob Herring (Arm) Jan. 27, 2021, 5:36 p.m. UTC | #4
On Thu, Jan 21, 2021 at 10:28 AM Bjorn Helgaas <helgaas@kernel.org> wrote:
>
> [+cc Rob]
>
> s/coherenct/coherent/ in subject
> s/traffic/DMA/ (this applies specifically to DMA, not to MMIO)
>
> On Thu, Jan 21, 2021 at 03:29:16PM +0530, Bharat Kumar Gogada wrote:
> > - Add support for routing PCIe traffic coherently when
> >  Cache Coherent Interconnect(CCI) is enabled in the system.
>
> s/- Add/Add/
> s/Interconnect(CCI)/Interconnect (CCI)/
>
> Can you include a URL to a CCI spec?  I'm not familiar with it.  I
> guess this is something upstream from the host bridge, i.e., between
> the CPU and the host bridge, so it's outside the PCI domain?
>
> I'd like to mention the DT "dma-coherent" property in the commit log
> to help connect this with the knob that controls it.
>
> The "dma-coherent" property is mentioned several places in
> Documentation/devicetree/bindings/pci/ (but not anything obviously
> related to xilinx-nwl).  Should it be moved to something like
> Documentation/devicetree/bindings/pci/pci.txt to make it more generic?

It is generic (beyond PCI), but needs to be documented as used in each
PCI host binding. Don't need any more than 'dma-coherent: true'.

>
> > Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
> > ---
> >  drivers/pci/controller/pcie-xilinx-nwl.c | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> >
> > diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c
> > index 07e3666..08e06057 100644
> > --- a/drivers/pci/controller/pcie-xilinx-nwl.c
> > +++ b/drivers/pci/controller/pcie-xilinx-nwl.c
> > @@ -26,6 +26,7 @@
> >
> >  /* Bridge core config registers */
> >  #define BRCFG_PCIE_RX0                       0x00000000
> > +#define BRCFG_PCIE_RX1                       0x00000004
> >  #define BRCFG_INTERRUPT                      0x00000010
> >  #define BRCFG_PCIE_RX_MSG_FILTER     0x00000020
> >
> > @@ -128,6 +129,7 @@
> >  #define NWL_ECAM_VALUE_DEFAULT               12
> >
> >  #define CFG_DMA_REG_BAR                      GENMASK(2, 0)
> > +#define CFG_PCIE_CACHE                       GENMASK(7, 0)
> >
> >  #define INT_PCI_MSI_NR                       (2 * 32)
> >
> > @@ -675,6 +677,12 @@ static int nwl_pcie_bridge_init(struct nwl_pcie *pcie)
> >       nwl_bridge_writel(pcie, CFG_ENABLE_MSG_FILTER_MASK,
> >                         BRCFG_PCIE_RX_MSG_FILTER);
> >
> > +     /* This routes the PCIe DMA traffic to go through CCI path */
> > +     if (of_dma_is_coherent(dev->of_node)) {
> > +             nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, BRCFG_PCIE_RX1) |
> > +                               CFG_PCIE_CACHE, BRCFG_PCIE_RX1);
> > +     }
> > +
> >       err = nwl_wait_for_link(pcie);
> >       if (err)
> >               return err;
> > --
> > 2.7.4
> >
diff mbox series

Patch

diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c
index 07e3666..08e06057 100644
--- a/drivers/pci/controller/pcie-xilinx-nwl.c
+++ b/drivers/pci/controller/pcie-xilinx-nwl.c
@@ -26,6 +26,7 @@ 
 
 /* Bridge core config registers */
 #define BRCFG_PCIE_RX0			0x00000000
+#define BRCFG_PCIE_RX1			0x00000004
 #define BRCFG_INTERRUPT			0x00000010
 #define BRCFG_PCIE_RX_MSG_FILTER	0x00000020
 
@@ -128,6 +129,7 @@ 
 #define NWL_ECAM_VALUE_DEFAULT		12
 
 #define CFG_DMA_REG_BAR			GENMASK(2, 0)
+#define CFG_PCIE_CACHE			GENMASK(7, 0)
 
 #define INT_PCI_MSI_NR			(2 * 32)
 
@@ -675,6 +677,12 @@  static int nwl_pcie_bridge_init(struct nwl_pcie *pcie)
 	nwl_bridge_writel(pcie, CFG_ENABLE_MSG_FILTER_MASK,
 			  BRCFG_PCIE_RX_MSG_FILTER);
 
+	/* This routes the PCIe DMA traffic to go through CCI path */
+	if (of_dma_is_coherent(dev->of_node)) {
+		nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, BRCFG_PCIE_RX1) |
+				  CFG_PCIE_CACHE, BRCFG_PCIE_RX1);
+	}
+
 	err = nwl_wait_for_link(pcie);
 	if (err)
 		return err;