@@ -55,6 +55,12 @@
#define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY)
#define IS_USB_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_SERIAL_USB)
#define IS_ISA_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA)
+#define IS_INTEL_IPU(pdev) ((pdev)->vendor == PCI_VENDOR_ID_INTEL && \
+ ((pdev)->device == 0x9a19 || \
+ (pdev)->device == 0x9a39 || \
+ (pdev)->device == 0x4e19 || \
+ (pdev)->device == 0x465d || \
+ (pdev)->device == 0x1919))
#define IS_AZALIA(pdev) ((pdev)->vendor == 0x8086 && (pdev)->device == 0x3a3e)
#define IOAPIC_RANGE_START (0xfee00000)
@@ -360,6 +366,7 @@ int intel_iommu_enabled = 0;
EXPORT_SYMBOL_GPL(intel_iommu_enabled);
static int dmar_map_gfx = 1;
+static int dmar_map_ipu = 1;
static int dmar_forcedac;
static int intel_iommu_strict;
static int intel_iommu_superpage = 1;
@@ -368,6 +375,7 @@ static int iommu_skip_te_disable;
#define IDENTMAP_GFX 2
#define IDENTMAP_AZALIA 4
+#define IDENTMAP_IPU 8
int intel_iommu_gfx_mapped;
EXPORT_SYMBOL_GPL(intel_iommu_gfx_mapped);
@@ -2839,6 +2847,9 @@ static int device_def_domain_type(struct device *dev)
if ((iommu_identity_mapping & IDENTMAP_GFX) && IS_GFX_DEVICE(pdev))
return IOMMU_DOMAIN_IDENTITY;
+
+ if ((iommu_identity_mapping & IDENTMAP_IPU) && IS_INTEL_IPU(pdev))
+ return IOMMU_DOMAIN_IDENTITY;
}
return 0;
@@ -3278,6 +3289,9 @@ static int __init init_dmars(void)
if (!dmar_map_gfx)
iommu_identity_mapping |= IDENTMAP_GFX;
+ if (!dmar_map_ipu)
+ iommu_identity_mapping |= IDENTMAP_IPU;
+
check_tylersburg_isoch();
ret = si_domain_init(hw_pass_through);
@@ -5622,6 +5636,18 @@ static void quirk_iommu_igfx(struct pci_dev *dev)
dmar_map_gfx = 0;
}
+static void quirk_iommu_ipu(struct pci_dev *dev)
+{
+ if (!IS_INTEL_IPU(dev))
+ return;
+
+ if (risky_device(dev))
+ return;
+
+ pci_info(dev, "Passthrough IOMMU for integrated Intel IPU\n");
+ dmar_map_ipu = 0;
+}
+
/* G4x/GM45 integrated gfx dmar support is totally busted. */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e00, quirk_iommu_igfx);
@@ -5657,6 +5683,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1632, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x163A, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x163D, quirk_iommu_igfx);
+/* disable IPU dmar support */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_iommu_ipu);
+
static void quirk_iommu_rwbf(struct pci_dev *dev)
{
if (risky_device(dev))
Intel IPU(Image Processing Unit) has its own (IO)MMU hardware, The IPU driver allocates its own page table that is not mapped via the DMA, and thus the Intel IOMMU driver blocks access giving this error: DMAR: DRHD: handling fault status reg 3 DMAR: [DMA Read] Request device [00:05.0] PASID ffffffff fault addr 76406000 [fault reason 06] PTE Read access is not set As IPU is not an external facing device which is not risky, so use IOMMU passthrough mode for Intel IPUs. Fixes: 26f5689592e2 ("media: staging/intel-ipu3: mmu: Implement driver") Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> --- Changes since v1: - Use IPU PCI DID value instead of macros to align with others - Check IPU PCI device ID in quirk --- drivers/iommu/intel/iommu.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)