diff mbox series

[v3,2/2] PCI: hv: Propagate coherence from VMbus device to PCI device

Message ID 1648138492-2191-3-git-send-email-mikelley@microsoft.com (mailing list archive)
State Handled Elsewhere
Delegated to: Lorenzo Pieralisi
Headers show
Series Fix coherence for VMbus and PCI pass-thru devices in Hyper-V VM | expand

Commit Message

Michael Kelley (LINUX) March 24, 2022, 4:14 p.m. UTC 
PCI pass-thru devices in a Hyper-V VM are represented as a VMBus
device and as a PCI device.  The coherence of the VMbus device is
set based on the VMbus node in ACPI, but the PCI device has no
ACPI node and defaults to not hardware coherent.  This results
in extra software coherence management overhead on ARM64 when
devices are hardware coherent.

Fix this by setting up the PCI host bus so that normal
PCI mechanisms will propagate the coherence of the VMbus
device to the PCI device. There's no effect on x86/x64 where
devices are always hardware coherent.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
---
 drivers/pci/controller/pci-hyperv.c | 9 +++++++++
 1 file changed, 9 insertions(+)
diff mbox series

Patch

diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index ae0bc2f..88b3b56 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -3404,6 +3404,15 @@  static int hv_pci_probe(struct hv_device *hdev,
 	hbus->bridge->domain_nr = dom;
 #ifdef CONFIG_X86
 	hbus->sysdata.domain = dom;
+#elif defined(CONFIG_ARM64)
+	/*
+	 * Set the PCI bus parent to be the corresponding VMbus
+	 * device. Then the VMbus device will be assigned as the
+	 * ACPI companion in pcibios_root_bridge_prepare() and
+	 * pci_dma_configure() will propagate device coherence
+	 * information to devices created on the bus.
+	 */
+	hbus->sysdata.parent = hdev->device.parent;
 #endif
 
 	hbus->hdev = hdev;