diff mbox series

[v2] PCI: imx6: Support more than Gen2 speed link mode

Message ID 1658287576-26908-1-git-send-email-hongxing.zhu@nxp.com (mailing list archive)
State Accepted
Headers show
Series [v2] PCI: imx6: Support more than Gen2 speed link mode | expand

Commit Message

Hongxing Zhu July 20, 2022, 3:26 a.m. UTC
Support more than Gen2 speed link mode, since i.MX8MP PCIe supports up to
Gen3 link speed.

Link: https://lore.kernel.org/r/1652866528-13220-2-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
Changes from v1:
- The Supported Link Speeds of the PCI_EXP_LNKCAP should be re-configured too.
- When only Gen1 is enabled, refine the dev_info accordingly.

---
 drivers/pci/controller/dwc/pci-imx6.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

Bjorn Helgaas July 20, 2022, 9:15 p.m. UTC | #1
On Wed, Jul 20, 2022 at 11:26:16AM +0800, Richard Zhu wrote:
> Support more than Gen2 speed link mode, since i.MX8MP PCIe supports up to
> Gen3 link speed.
> 
> Link: https://lore.kernel.org/r/1652866528-13220-2-git-send-email-hongxing.zhu@nxp.com
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

You should not post patches with my signed-off-by.

I add my signed-off-by to patches when I merge them.

I applied this to pci/ctrl/imx6, replacing the v1 patch, thanks!

> ---
> Changes from v1:
> - The Supported Link Speeds of the PCI_EXP_LNKCAP should be re-configured too.
> - When only Gen1 is enabled, refine the dev_info accordingly.
> 
> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index e1ba11dabaa8..b66876f7efe0 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -844,12 +844,12 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
>  	if (ret)
>  		goto err_reset_phy;
>  
> -	if (pci->link_gen == 2) {
> -		/* Allow Gen2 mode after the link is up. */
> +	if (pci->link_gen > 1) {
> +		/* Allow faster modes after the link is up */
>  		dw_pcie_dbi_ro_wr_en(pci);
>  		tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
>  		tmp &= ~PCI_EXP_LNKCAP_SLS;
> -		tmp |= PCI_EXP_LNKCAP_SLS_5_0GB;
> +		tmp |= pci->link_gen;
>  		dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp);
>  
>  		/*
> @@ -884,7 +884,7 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
>  		if (ret)
>  			goto err_reset_phy;
>  	} else {
> -		dev_info(dev, "Link: Gen2 disabled\n");
> +		dev_info(dev, "Link: Only Gen1 is enabled\n");
>  	}
>  
>  	imx6_pcie->link_is_up = true;
> -- 
> 2.25.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Hongxing Zhu July 21, 2022, 6:05 a.m. UTC | #2
> -----Original Message-----
> From: Bjorn Helgaas <helgaas@kernel.org>
> Sent: 2022年7月21日 5:16
> To: Hongxing Zhu <hongxing.zhu@nxp.com>
> Cc: l.stach@pengutronix.de; bhelgaas@google.com;
> lorenzo.pieralisi@arm.com; tharvey@gateworks.com;
> linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; kernel@pengutronix.de; dl-linux-imx
> <linux-imx@nxp.com>
> Subject: Re: [PATCH v2] PCI: imx6: Support more than Gen2 speed link mode
> 
> On Wed, Jul 20, 2022 at 11:26:16AM +0800, Richard Zhu wrote:
> > Support more than Gen2 speed link mode, since i.MX8MP PCIe supports up
> to
> > Gen3 link speed.
> >
> > Link:
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.ker
> nel.org%2Fr%2F1652866528-13220-2-git-send-email-hongxing.zhu%40nxp.co
> m&amp;data=05%7C01%7Chongxing.zhu%40nxp.com%7Ceb7d668e5b7d469
> 8e62c08da6a9502a8%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%
> 7C637939485477367788%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjA
> wMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C
> %7C&amp;sdata=ruq7cOi7uAOq6qOFtj1OXpi6EVgeNTDFozOHJnZpga8%3D&a
> mp;reserved=0
> > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> 
> You should not post patches with my signed-off-by.
> 
Okay, got that.

> I add my signed-off-by to patches when I merge them.
> 
> I applied this to pci/ctrl/imx6, replacing the v1 patch, thanks!
> 
Thanks a lot for your kindly help.

Best Regards
Richard Zhu

> > ---
> > Changes from v1:
> > - The Supported Link Speeds of the PCI_EXP_LNKCAP should be re-configured
> too.
> > - When only Gen1 is enabled, refine the dev_info accordingly.
> >
> > ---
> >  drivers/pci/controller/dwc/pci-imx6.c | 8 ++++----
> >  1 file changed, 4 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pci-imx6.c
> b/drivers/pci/controller/dwc/pci-imx6.c
> > index e1ba11dabaa8..b66876f7efe0 100644
> > --- a/drivers/pci/controller/dwc/pci-imx6.c
> > +++ b/drivers/pci/controller/dwc/pci-imx6.c
> > @@ -844,12 +844,12 @@ static int imx6_pcie_start_link(struct dw_pcie
> *pci)
> >  	if (ret)
> >  		goto err_reset_phy;
> >
> > -	if (pci->link_gen == 2) {
> > -		/* Allow Gen2 mode after the link is up. */
> > +	if (pci->link_gen > 1) {
> > +		/* Allow faster modes after the link is up */
> >  		dw_pcie_dbi_ro_wr_en(pci);
> >  		tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
> >  		tmp &= ~PCI_EXP_LNKCAP_SLS;
> > -		tmp |= PCI_EXP_LNKCAP_SLS_5_0GB;
> > +		tmp |= pci->link_gen;
> >  		dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp);
> >
> >  		/*
> > @@ -884,7 +884,7 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
> >  		if (ret)
> >  			goto err_reset_phy;
> >  	} else {
> > -		dev_info(dev, "Link: Gen2 disabled\n");
> > +		dev_info(dev, "Link: Only Gen1 is enabled\n");
> >  	}
> >
> >  	imx6_pcie->link_is_up = true;
> > --
> > 2.25.1
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@lists.infradead.org
> >
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.infr
> adead.org%2Fmailman%2Flistinfo%2Flinux-arm-kernel&amp;data=05%7C01%
> 7Chongxing.zhu%40nxp.com%7Ceb7d668e5b7d4698e62c08da6a9502a8%7C
> 686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637939485477367788
> %7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLC
> JBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&amp;sdata=KTl6fya0
> lIU%2FtvZOB9v%2BxEgaAhhYo45JZqwp0Cfz7qs%3D&amp;reserved=0
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index e1ba11dabaa8..b66876f7efe0 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -844,12 +844,12 @@  static int imx6_pcie_start_link(struct dw_pcie *pci)
 	if (ret)
 		goto err_reset_phy;
 
-	if (pci->link_gen == 2) {
-		/* Allow Gen2 mode after the link is up. */
+	if (pci->link_gen > 1) {
+		/* Allow faster modes after the link is up */
 		dw_pcie_dbi_ro_wr_en(pci);
 		tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
 		tmp &= ~PCI_EXP_LNKCAP_SLS;
-		tmp |= PCI_EXP_LNKCAP_SLS_5_0GB;
+		tmp |= pci->link_gen;
 		dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp);
 
 		/*
@@ -884,7 +884,7 @@  static int imx6_pcie_start_link(struct dw_pcie *pci)
 		if (ret)
 			goto err_reset_phy;
 	} else {
-		dev_info(dev, "Link: Gen2 disabled\n");
+		dev_info(dev, "Link: Only Gen1 is enabled\n");
 	}
 
 	imx6_pcie->link_is_up = true;